Wooden Camera DSLR Rod (Small) SKU: 166000 DSLR Rod (Small) is a component included with the Quick Cage (DSLR, Small) and accommodates smaller cameras like Canon t2i, t3i, t4i, t5i, 60D, and 550dNikon D7100, D7000, D5200, D90, D5100, D3200, D3100Panasonic Gh2 and Gh3. Great for shooters that want to use their Quick Cage (DSLR) with smaller cameras but that may have already purchased the Quick Cage (DSLR, Medium) or Quick Cage (DSLR, Large). Rod Length: 123mm Specifications Weigh t33 gDimensions 123 mm x 15.2 mm x 15.2 mm

Wooden Camera Easy RiserSKU: 213700Riser shim plate compatible with RED Ranger, DSMC2 Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2 cameras. Combine with Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio) or other RED style bridge plates for correct lens height studio rods. Combine with LW 15mm Bracket (RED DSMC2) for lightweight rods at correct lens height.Note that this riser is also compatible with our original LW 15mm Bracket for the RED® Epic/Scarlet.Includes2 x Captured 3/8-16 riser screwsSpecificationsWeight: 181.437 grDimensions: 12.7 x 177.8 x 177.8 mm

Wooden Camera Easy Top (RED DSMC2) SKU: 213900 Wooden Camera Top plate for RED Weapon Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by 4 x 1/4-20 captured screws. Two LCD/EVF interfaces are included. One is located under the front portion of the top plate and one is included via the tethered side attachment. Both convert the LCD/EVF pogo pins to the standard 16pin LEMOs which are found on the right side of the top plate. These LEMOs are specially manufactured to allow users to select the orientation in increments of 45 degrees. A third interface is located underneath the center of the top plate and communicates with the start/stop trigger on top of the camera. A board inside the top plate converts the non standard interface to an ARRI standard 3pin Fischer. Any ARRI standard trigger can be used with the camera and no power trigger is required. Includes 4 x 1/4-20 x captured screws

Wooden Camera Elite Accessory System for Blackmagic URSA Cine 12K/17KSKU: K10041Optimize the Blackmagic URSA Cine 12K/17K with an accessory system that compliments its design and adds features to efficiently build out the camera without impeding on ports or usability.Riser Plate and ARCA Base PlateThis system starts with a Riser Plate and ARCA Base Plate that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The Riser Plate facilitates an open design, allowing efficient airflow to the camera. These plates combined are compatible with any bridge plates that use ARRI Standard height. Utilizing the built-in ARCA system, it allows for quick transitions between Steadicam, shoulder, or tripod workflows with Wooden Camera ARCA accessories.Top Plate SystemTo enhance the capabilities of the camera, a Top Plate emphasizing air flow and connectivity is secured to the top of the camera via three ¼”-20 screws along the camera's center mounting points. In addition, a removable 15mm Dual rod clamp allows users to connect items like the Blackmagic EVF or additional 3rd party accessories. The design includes a removable rear extension for additional connecting points to the top plate. This Top Plate is compatible with the stock Blackmagic URSA handle.Ultra HandleThis system also includes an Ultra Handle that allows users to securely hold on to your camera and adds mounting options for additional accessories.Included ItemsRiser Plate for Blackmagic URSA Cine 12K/17KTop Plate for Blackmagic URSA Cine 12K/17KTop Plate Extension Block for Blackmagic URSA Cine 12K/17KUltra Handle (3/8"-16) Standard KitTop Plate Dual Rod Clamp - FrontARCA Base PlateSpecificationsWeight: 1579 gDimensions: 161 x 135 x 96 mm

Wooden Camera Elite Accessory System (Sony Rialto, Rialto 2) SKU: A00309 A full-featured Sensor Cage System that includes a lens-centered Baseplate, Top Plate, 15mm Dual Rod Clamp, and Ultra Carry Handle. Integrates seamlessly with the VENICE 2 Baseplate, Riser, Top Plate, and Rods, allowing seamless integration of Rods and Camera Dovetails while maintaining the same low-profile footprint and optical center. Weight: 2370g Dimensions: 400 mm x 170 mm x 268.5mmIncluded Items Baseplate System (Sony Rialto, Rialto 2)Top Plate (Sony Rialto, Rialto 2)Top Plate 15mm Dual Rod Clamp (Sony VENICE, VENICE 2, Rialto, Rialto 2)Ultra Handle 3" Kit (Sony VENICE)

Wooden Camera Elite Accessory System (Sony VENICE, VENICE 2) SKU: K10021 A feature-rich, custom-designed Camera Cage and Accessories package tailored to the exact dimensions and functions of the Sony VENICE 2 camera and Rialto 2 extension sensor. A low-profile modular design allows for effortless transitions between camera and extension setups while maintaining lens-center and providing countless configuration options to align with your shooting style and production demands. Premium materials and ergonomic construction reduce weight without sacrificing strength or durability. Weight: 2389.6 gDimensions: 216 mm x 170 mm x 125 mmIncluded Items Quick-Release Top Plate System (Sony VENICE, VENICE 2)Faceplate Cage System (Sony VENICE, VENICE 2, Rialto, Rialto 2)Baseplate System (Sony VENICE, VENICE 2)Ultra Handle System (Sony VENICE)Side Hook-and-Loop Plate (Sony VENICE 2)

Wooden Camera Elite Accessory System for ALEXA 35 SKU: K10024 A unique modular cage system designed to integrate with your preferred accessories, giving you the flexibility to fine-tune your setup and optimize your workflow. This Elite Accessory System seamlessly adapts to ALEXA 35’s unique workflow scenarios, allowing you to quickly adapt your setup to any shooting scenario. Weight: 1521 gDimensions: 203 mm x 139 mm x 122 mm Included Items 1 x Base Plate System (ALEXA 35)1 x Side Rail System (ALEXA 35)1 x Top Plate System (ALEXA 35)1 x Handle Adaptor Kit for CCH-51 x Accessory Kit for PDM-11 x Ultra Handle System (Universal 3/8"-16)1 x Antenna Relocation Bracket

Wooden Camera Elite Accessory System for Canon EOS C80 This system starts with an ARCA Base Plate and Riser that offers a base that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The built-in ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows. Two 12” 15mm rods and a Safety Dovetail are included to round out the foundation of your setup.The NATO Side Rail provides additional mounting points to the operator's side, connecting the Top and Riser plates, creating a robust, secure design that wraps around the camera. To cap off this Elite System is the 2-piece Top Plate that is secured to the top of the camera via a single 1/4”-20 screw and through the hot shoe mount on the back of the camera. The design includes a removable back plate, if the user wants to use the hot shoe mount. This system also includes an Ultra Handle that allows users to securely hold on to your camera as well as adds mounting options for additional accessoriesThe power component of the Elite System is our Pro Gold Mount or V-Mount battery slides that provide external power to the Canon EOS C80. The Battery Slides feature 3x D-Tap ports for accessory power– including a digital fuse, which cuts off accessory outputs while leaving the camera powered. This battery plate can be attached to the Top Plate or Riser Plate by aligning the interlocking ridges and turning the thumbwheel to tighten a 1/4”-20 screw.When mounted to the Top Plate, this system still allows access to the original battery compartment– enabling operators to hot-swap power between both BPU and brick batteries. To adjust the battery plate’s vertical position, loosen the pivoting clamp and slide the plate up or down. Included Items Battery Slide Pro Gold Mount / Battery Slide Pro V-Mount (Canon EOS C70/C80)Top Plate for Canon EOS C80ARCA Riser Plate for Canon EOS C80ARCA Base Plate for Canon EOS C80/C400NATO Side Rail for Canon EOS C80Ultra Handle Upright (Universal 3/8”-16)Ultra Handle 4” ExtensionUltra Handle Extension 1”Safety Dovetail 8”15mm Rod 12” (x2) SpecificationsElite Accessory System for Canon EOS C80 (Gold Mount)Weight: 1955 gDimensions: 135 x 175 x 110 mmElite Accessory System for Canon EOS C80 (V-Mount)Weight: 1955 gDimensions: 135 x 175 x 110 mm

Wooden Camera Elite Accessory System for Canon EOS C80 This system starts with an ARCA Base Plate and Riser that offers a base that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The built-in ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows. Two 12” 15mm rods and a Safety Dovetail are included to round out the foundation of your setup.The NATO Side Rail provides additional mounting points to the operator's side, connecting the Top and Riser plates, creating a robust, secure design that wraps around the camera. To cap off this Elite System is the 2-piece Top Plate that is secured to the top of the camera via a single 1/4”-20 screw and through the hot shoe mount on the back of the camera. The design includes a removable back plate, if the user wants to use the hot shoe mount. This system also includes an Ultra Handle that allows users to securely hold on to your camera as well as adds mounting options for additional accessoriesThe power component of the Elite System is our Pro Gold Mount or V-Mount battery slides that provide external power to the Canon EOS C80. The Battery Slides feature 3x D-Tap ports for accessory power– including a digital fuse, which cuts off accessory outputs while leaving the camera powered. This battery plate can be attached to the Top Plate or Riser Plate by aligning the interlocking ridges and turning the thumbwheel to tighten a 1/4”-20 screw.When mounted to the Top Plate, this system still allows access to the original battery compartment– enabling operators to hot-swap power between both BPU and brick batteries. To adjust the battery plate’s vertical position, loosen the pivoting clamp and slide the plate up or down. Included Items Battery Slide Pro Gold Mount / Battery Slide Pro V-Mount (Canon EOS C70/C80)Top Plate for Canon EOS C80ARCA Riser Plate for Canon EOS C80ARCA Base Plate for Canon EOS C80/C400NATO Side Rail for Canon EOS C80Ultra Handle Upright (Universal 3/8”-16)Ultra Handle 4” ExtensionUltra Handle Extension 1”Safety Dovetail 8”15mm Rod 12” (x2) SpecificationsElite Accessory System for Canon EOS C80 (Gold Mount)Weight: 1955 gDimensions: 135 x 175 x 110 mmElite Accessory System for Canon EOS C80 (V-Mount)Weight: 1955 gDimensions: 135 x 175 x 110 mm

Wooden Camera Elite Accessory System for FUJIFILM GFX ETERNA 55SKU: 50-K10001This Elite Accessory System is a comprehensive suite of accessories designed to optimize the functionality and versatility of the ETERNA camera system. The Ultra Handle lies at the heart of this system, it seamlessly mounts to the Top Plate using .h-16 screws. The innovative design gives users an ergonomic grip and opens up greater flexibility with its modular design, expanding on shooting configurations.The modular 3-plate Top Plate lets users customize their camera rig setup using various mounting points. Using all 3 plates covers the slide-in accessory channel on the camera, but the Side Plate and Front Plate separate to expose the slide-in function for native handle use, if needed. Blind holes protect the camera from damage. The included Side Rails offer strategic enhanced accessory attachment options.The Rear Side Rail attaches directly to the camera body, while the Side Rail can be mounted securely to both the Top Side and Riser Plate. Both rails provide the option of NATO, .h-20 and .h-16 mounting points, allowing you to customize your setup with monitors, microphones, lights, and other accessories. The Riser Plate features dual 15mm rod mounts, which are compatible with industry-standard rod-based accessories, allowing for easy mounting of follow focus systems, matte boxes, and other essential tools.Additionally, the ARCA-compatible Base Plate expands rigging possibilities by allowing for direct attachment of ARRI Standard Studio Bridge Plates. The integrated ARCA rails on the Riser Plate allow for effortless switching between different camera support systems, such as tripods, handheld, and steadicam, without the need for time-consuming reconfiguration.SpecificationsWeight: 1579 gDimensions: 199.8 x 492 x 31.5 mmIncludesA00426 Ultra Handle (3/8"-16) Standard Kit50-K10007 Top Plate for FUJIFILM GFX ETERNA 55A00907 Rear Side Rail for FUJIFILM GFX ETERNA 5550-K10004 Side Rail Kit for FUJIFILM GFX ETERNA 5550-K10003 Base Plate System for Fujifilm GFX ETERNAA00375 Top Plate Dual Rod Clamp - Front

Wooden Camera Elite Cage System for Canon EOS C50SKU: 50-K10056The Elite Cage System for Canon EOS C50 is a complete suite of professional accessories designed to maximize the camera’s functionality, flexibility, and on-set efficiency. Building upon the Core Kit, this system includes baseplate and ARCA adapter components for tripod-mounted configurations.The system features the Cage L-Bracket, Top Plate, and Cage Grip for Canon EOS C50, populating your rig with mounting points and offering protection against dings and scratches. The integrated HDMI clamp ensures uninterrupted video output. Use the ARCA Adapter with the 15mm Lightweight Baseplate for proper optical height setups, and add the Mini Top Handle for a lightweight carrying solution for handheld shooting and swapping between rigs. Additional accessories, including a low-profile Bolt-On NATO Rail, ¼”-20 Cold Shoe, and Round Bubble Level, to enhance mounting versatility and level adjustment. Together, these components create the most robust and expandable cage configuration for the Canon EOS C50.Included ItemsTop Plate for Canon EOS C50Cage L-Bracket for Canon EOS C50Cage Grip for Canon EOS C50Mini Top Handle (3/8-16)LW 15mm Baseplate1/4-20 Cold ShoeLow Profile Bolt-On NATO RailARCA Adapter PlateRound Bubble LevelSpecificationsWeight: 1324 gDimensions: 543 x 215 x 345 mm

Elite Cage System for Sony FX2SKU: 50-K10009The Elite Cage System for Sony FX2 delivers a comprehensive set of accessories that bring professional-grade modularity and versatility to the Sony FX2. This system includes the FX2 Cage and Top Plate, paired with the Cage Grip for enhanced handling and support. A 15mm Lightweight Baseplate and 20mm ARCA Riser provide flexible mounting options, while the 3” Ultra Handle Kit offers a secure, ergonomic grip with industry-standard mounting points for additional accessories. Together, these elements form a robust and expandable system that adapts seamlessly to evolving production demands.Included ItemsTop Plate for Sony FX2Cage L-Bracket for Sony FX2Cage Grip for Sony FX2LW 15mm Baseplate20mm ARCA RiserMini Top Handle (3/8-16)SpecificationsWeight: 734.8 gDimensions: 101.2 x 104.8 x 93.2 mm

EVF Plate for SONY BURANO SKU: A00586 Open up the mounting options for the Sony BURANO’s EVF by adding the EVF Plate to your build. Designed for the inevitable repositioning of the EVF from its original location, add a Bolt-On Accessory Rail Clamp anywhere on the Top Plate, Ultra Handle System or Side Rails. This plate utilizes multiple Accessory Rails as mounting options, and allows you to adjust the EVF position to suit the needs of the job. Included Items: 4x 60mm Accessory Rails, 3/16” Hex KeyWeight: 124.74 gDimensions: 133 x 16 x 81 mm

EVF System (Sony BURANO)SKU: A00575Utilizing a newly designed Universal 15mm Rod Clamp, the EVF System introduces a modular way of mounting the EVF. Attach the Sony BURANO EVF to the bracket via a 1/4”-20 screw, allowing the 2.5mm threads across the back and sides to be used for accessories like our Accessory Rails. The Universal EVF Accessory Rail Swivel Clamp is fully rotatable and allows the user to determine the optimal location. Push button safeties help keep the EVF secure to the system while offering a quick release function, in case removal is necessary. An additional mounting option is included for users to mount the EVF system using the Accessory Rails to an Accessory Bolt-On Clamp for placement anywhere around the camera for when traditional EVF use is not needed.Weight: 308.90 gDimensions: 125 x 170 x 82 mmIncluded ItemsUniversal 15mm Rod ClampEVF Plate for Sony BURANOUniversal EVF Swivel ArmUniversal EVF Accessory Rail Swivel ClampAccessory Rail Bolt-On Clamp

Woooden Camera Extension for Elite Handheld AccessoriesThis lightweight Extension is manufactured with 7075 Aluminum featuring a pentagonal design to maintain the structure and strength for high-stress shooting scenarios. Each extension incorporates a 5-degree offset allowing the full kit units to fold down for storage and 32mm rosettes take the industry standard M6 screws to tie in rosette accessories. 1/4”-20 and 3/8”-16 mounting points are added along the center of the extension for attaching accessories like monitors.The Knob on this Extension is made from stainless steel and coated in DLC for added strength with finger grooves for easy tightening. The Knobs have a hole in the center for a 3/16” or 4mm hex tool for extra tightening if needed.Specifications4” Extension: Weight: 129.3g | Dimensions: 134.7 x 31 x 32.6 mm6” Extension: Weight: 156.5 g | Dimensions: 185.5 x 31 x 32.6 mm 8” Extension: Weight: 182.3g | Dimensions: 236.6 x 31 x 32.6 mm

Woooden Camera Extension for Elite Handheld AccessoriesThis lightweight Extension is manufactured with 7075 Aluminum featuring a pentagonal design to maintain the structure and strength for high-stress shooting scenarios. Each extension incorporates a 5-degree offset allowing the full kit units to fold down for storage and 32mm rosettes take the industry standard M6 screws to tie in rosette accessories. 1/4”-20 and 3/8”-16 mounting points are added along the center of the extension for attaching accessories like monitors.The Knob on this Extension is made from stainless steel and coated in DLC for added strength with finger grooves for easy tightening. The Knobs have a hole in the center for a 3/16” or 4mm hex tool for extra tightening if needed.Specifications4” Extension: Weight: 129.3g | Dimensions: 134.7 x 31 x 32.6 mm6” Extension: Weight: 156.5 g | Dimensions: 185.5 x 31 x 32.6 mm 8” Extension: Weight: 182.3g | Dimensions: 236.6 x 31 x 32.6 mm

Woooden Camera Extension for Elite Handheld AccessoriesThis lightweight Extension is manufactured with 7075 Aluminum featuring a pentagonal design to maintain the structure and strength for high-stress shooting scenarios. Each extension incorporates a 5-degree offset allowing the full kit units to fold down for storage and 32mm rosettes take the industry standard M6 screws to tie in rosette accessories. 1/4”-20 and 3/8”-16 mounting points are added along the center of the extension for attaching accessories like monitors.The Knob on this Extension is made from stainless steel and coated in DLC for added strength with finger grooves for easy tightening. The Knobs have a hole in the center for a 3/16” or 4mm hex tool for extra tightening if needed.Specifications4” Extension: Weight: 129.3g | Dimensions: 134.7 x 31 x 32.6 mm6” Extension: Weight: 156.5 g | Dimensions: 185.5 x 31 x 32.6 mm 8” Extension: Weight: 182.3g | Dimensions: 236.6 x 31 x 32.6 mm

Wooden Camera Eyepiece Leveler Bracket Base for O'Connor Pan and Tilt Heads SKU: 261400 The Eyepiece Leveler Bracket Base for OConnor Pan and Tilt Heads mounts on to OConnor pan and tilt tripod heads and allows for the attachment of eyepiece levelers, such as Wooden Camera Eyepiece Leveler Telescoping Arm. The eyepiece leveler bracket is attached to a tripod via two #10-24 x 1/2in screws and is adjustable in two directions 4 x #10-24 x 1/2 inch socket head cap screwsWeight: 231.3g Dimensions: 203 mm x 101.6 mm x 44.5 mm

Wooden Camera Faceplate Cage SKU: A00296 The only Faceplate that attaches directly to VENICE 2 using its existing sensor-block screws. DLC-coated stainless steel rosettes and an optional lens-centered Rod Clamp let you create a standalone rig that can be quickly removed from VENICE 2 for handheld, studio, and gimbal use. Mount everything to the Faceplate, and unlock the Top and Base Plates to slide off the camera, leaving an independent sensor cage with viewfinder and all accessories attached. Includes configurable swing-out tape hooks, a dedicated rod mounting point for lens control motors, EVF cable clips, and more. Weight: 254 gDimensions: 130 mm x 170 mm x 152 mm

Wooden Camera Faceplate Cage 15mm Dual Rod Clamp SKU: A00258 The lens-centered 15mm Front Rod Clamp allows for lens support, lens control motors, or handheld grip use when the Baseplate is removed for gimbal or handheld configurations. Weight: 254 g Dimensions: 113 mm x 20 mm x 43.5 mm

Wooden Camera Faceplate Cage System SKU: A00215 The only Faceplate designed to integrate perfectly with existing sensor-block screw locations on the VENICE 2, allowing you to easily switch from camera mode to Rialto 2 Extension Mode while keeping your accessories attached. Features include DLC-coated stainless steel rosettes, a lens-centered Rod Clamp for use when the Base Plate is removed, configurable swing-out tape hooks, a dedicated rod-mounting point for lens control motors, EVF cable clips, and more. Weight: 312 gDimensions: 46.5 mm x 170 mm x 180 mm Included Items 1 x Faceplate Cage (Sony VENICE, VENICE 2, Rialto, Rialto 2)1 x Faceplate Cage 15mm Dual Rod Clamp (Sony VENICE, VENICE 2, Rialto, Rialto 2)

Wooden Camera Front Rod Bracket for ALEXA 35 (CCH-5) SKU: A00377 A 15mm Dual Front Rod Bracket that allows users to attach the ARRI CCH-5 handle to the Wooden Camera Top Plate. Weight: 68 gDimensions: 30 x 117 x 31 mm

Wooden Camera Front Top Plate Extension for FUJIFILM GFX ETERNA 55SKU: A00970The Front Top Plate Extension was designed for users who solely need the Power Strip functionality. It provides a forward-facing 3/8”-16 mounting point and allows the use of the Native Top Handle, while adding mounting points on the camera.This extension securely connects to the Side Plate or Power Strip. The design features etchings indicating the camera's film plane and a single tie-down point for securing it to the camera. This accessory also includes side mounting points for attaching additional accessories, like a Side Rail, and blind holes to prevent damage to the camera.This item is also compatible with the Rear and Side Plates for the FUJIFILM GFX ETERNA 55. Consider adding a Side or Rear Extension for increased stability. Please note: The Power Strip or Side Plate Extension is required for stability. This item does not work properly on the camera alone.SpecificationsWeight: 58.06 gDimensions: 76.8 x 41.1 x 14.5 mm

Wooden Camera Fujifilm GFX100S Camera CageSKU: A00067 Fujifilm GFX100S Cage is a feature-rich camera cage designed exclusively for the Fujifilm GFX100S camera. This is a wrap-around, one-piece cage. The custom design offers added support and stability while providing an array of industry-standard 1/4"-20 and 3/8"-16 mounting points along the top and side of the cage. All mounting points feature a Wooden Camera standard locating hole pattern which is compatible with ARRI standard locating pin accessories. The Arca-Swiss Dovetail can be removed and the included Arca-Swiss Wedge can be attached directly to the bottom of the cage parallel to the bottom of the camera - an orientation most commonly used in photography. The cage also features a detachable cable clamp, engraved markings to indicate the camera’s focal plane, intuitive battery door latch for use with dummy batteries, and a hot shoe clamp for securing the camera into the cage. Features Location TabsFocal Plane MarkingsFull Wrap-Around CageIntuitive Battery Door Latch1/4"-20 and 3/8"-16 Mounting Points with ARRI-Standard Location Pins Specifications Weight: 287g Dimensions: 122.3 x 172 x 66 mm