BirdDog MAKI Live PoE to USB-C AdapterSKU: BDMKL-PABirdDog PoE Adaptor for MAKI Live
Chrosziel Adaptor cable with Fujinon con. SKU: 401-CABLE Chrosziel Adapter cable with angled plug 12-pin HIROSE (Fujinon standard) to 12-pin HIROSE socket (Fujinon standard) to avoid collision with the tubes of the camera light weight support on motorized Fujinon lenses
Chrosziel Extension cable for Sony Multiport SKU: CAB-EXT-MULTI12 Chrosziel Extension cable for SONY PMW-FX9 Multiport Socket and usage of the original SMART GRIP controller (length 12.5cm/5inch). Socket with mounting points, 1 cable tie incl.
Chrosziel FX9 Y-cable Sony Multi-Jack 3,5mm CAB-FX9 SKU: CAB-FX9 Y-cable for Sony FX9 - Sony Multi plug and socket to 3.5mm serial male Jack (90 degree), 35cm, only for servo drives version 2
Core SWX BMPC-EXT Pocket Conversion Cable 6'' The Core SWX BMPC-EXT is a 6” BlackMagic Pocket Camera conversion cable. It will convert any Switronix BMCC product to work with the Pocket Camera. Length: 15.24 cm
Core SWX Extension Cable for Burano I/O Module SKU: BUR-IO-EXT 12″ Extension cable for PMC Burano IO Module extension. Only works with CSX-BUR-IO. Allows for moving the module(CSX-BUR-IO) to another location on the camera rig(not required). Length: 30,48 cmWeight: 0,18kg
Switronix LC-TVL-02 2-Pin LEMO ARRI to TVLogic Mini-XLR Coiled Cable, 18" extends to 48". Technical data InputDC 11-28vContracted Length 18" / 45.72 cmExpanded Length 48" / 121.92 cm
Hawk-Woods LA-100 Hawk-Woods LA-100 6-pin Lemo to XLR Cable is a DJI Ronin 2 power cable takes power from the 6-pin Lemo on the DJI Ronin 2 to a XLR 4-pin right angle connector. This is ideal for powering Sony Camera's or Sony's extension unit. Input: Lemo 1B 6pin MaleOutput: XLR 4pin Female
Hawk-Woods LA-57 Hirose 4-pin Male - Mini XLR 4-pin Female (40cm) TVLogic VFM Power Cable. Features 40 cm LengthHirose 4 pin (Male)Mini XLR 4 pin FemaleTV Logic Compatible
Hawk-Woods Fischer 3-pin (RS) - Mini XLR 4-pin (female) Hawk-Woods Fischer 3-pin (RS) Mini XLR 4-pin (female) - 75cm Length allows the user to power a TVlogic Monitor from a 24v RS 3 pin Fischer output such as the 3 pin output found on Arri cameras. The voltage is regulated to 12v at the Mini XLR 4 pin which is then suitable for TV Logic monitors. Weight: 40gInput: Fischer 102 3pin MaleOutput: Mini XLR 4pin Female 12v Reg
Kondor Blue Z Cam E2 Flagship Cable Pack Kondor Blue Z Cam E2 Flagship Cable Pack consists of: 1 x 5 PIN LEMO TO XLR AUDIO CABLE1 x D-TAP TO LEMO COILED 2 PIN 0B MALE POWER CABLE1 x USB C CABLE FOR SSD Video RECORDING1 x 14" HDMI BRAIDED CABLE 4K
MID49 DB Replacement 2.5mm 3pin Fischer Trigger CableSKU: M49-CBL-DB-T-VEN DBReplacement 2.5mm 3pin Fischer Trigger Cable (Sony Venice, Sony Venice 2) is an adapter cable for the Power Distribution Box (Sony Burano, Gold Mount) and (Sony Burano, V-Mount) that allows it to be used on Venice and Venice 2.
MID49 DB Replacement 2.5mm LANC Trigger CableSKU: M49-CBL-DB-T-BUR DBReplacement 2.5mm LANC Trigger Cable (Sony Burano) is a 2.5mm TRS cable that is 12.5 inches tip to tip and is a replacement cable for Power Distribution Box (Sony Burano, Gold Mount) and (Sony Burano, V-Mount).
MID49 EVF/LCD Extension Cable (Sony Burano, FX9, FX6)EVF/LCD Extension Cable (Sony Burano, FX9, FX6) is an extension for Sony's 40 pin monitors system found on recent cameras including Burano, FX9, FX6, FS7, FS7mkII, FS5, FS5mkII.
MID49 EVF/LCD Extension Cable (Sony Burano, FX9, FX6)EVF/LCD Extension Cable (Sony Burano, FX9, FX6) is an extension for Sony's 40 pin monitors system found on recent cameras including Burano, FX9, FX6, FS7, FS7mkII, FS5, FS5mkII.
MID49 EVF/LCD Extension Cable (Sony Burano, FX9, FX6)EVF/LCD Extension Cable (Sony Burano, FX9, FX6) is an extension for Sony's 40 pin monitors system found on recent cameras including Burano, FX9, FX6, FS7, FS7mkII, FS5, FS5mkII.
MID49 Mains Power Supply 24V (ARRI Amira, Alexa Mini, Mini LF, Alexa 35, URSA Cine LF)SKU: M49-PWS-ARM-EU Mains Power Supply 24V for ARRI Amira, Alexa Mini, Mini LF, Alexa 35, and Blackmagic URSA Cine LF cameras, which provides up to 9A and accepts 120V or 240V AC input.AC Cord Length: 1.2mOutput Cord Length: 1.2mTransformer Dimensions: (LxWxH): 180 x 80 x 50mmWeight: 1023g
MID49 Pickle Trigger for ARRI Standard 3pin FischersThe Pickle Trigger for ARRI Standard 3pin Fischers attaches to any device that can accept a close-to-ground start / stop signal over a 3-pin Fischer like ARRI Alexa, Sony Venice, and cameras with power distribution boxes like our DB-4, DB-8, DB-9, DB-10, and DB-11.Gherkin bumps provide an excellent grip surface, and the pickle is 5 inches long. This can also be done with a LANC trigger, so send us an email if you need one! Choose between 3 ft and 10 ft cable lengths
MID49 Pickle Trigger for ARRI Standard 3pin FischersThe Pickle Trigger for ARRI Standard 3pin Fischers attaches to any device that can accept a close-to-ground start / stop signal over a 3-pin Fischer like ARRI Alexa, Sony Venice, and cameras with power distribution boxes like our DB-4, DB-8, DB-9, DB-10, and DB-11.Gherkin bumps provide an excellent grip surface, and the pickle is 5 inches long. This can also be done with a LANC trigger, so send us an email if you need one! Choose between 3 ft and 10 ft cable lengths
NEUTRIK NC3FX-TOP 3 pole female cable connector, TRUE OUTDOOR PROTECTION (TOP), gold contacts The X-TOP series is a "heavy-duty" XLR cable connector for outdoor use. IP65 rating and certified outdoor protection to UL 50E by mating with related cable or chassis connector of the XLR TOP range. Features Heavy-duty sealed XLR connector range for harsh and demanding environmentIP65 rating and certified outdoor protection to UL 50E (in combination with a TOP range counterpart)Uses high impact UV resistant materials
OBSBOT USB-C to Ethernet Adapter Obsbot USB-C to Ethernet Adapter is specifically designed for OBSBOT Tail Air's ethernet connectivity, providing stable and smooth gigabit. Features Designed for stable ethernet connectionPower over ethernet (PoE) support to router and other terminalsExtra power supply via USB-C port when PoE is not available
PATONA Premium PD100W D-Tap to USB-C Adapter The PATONA PD100W is an adapter from D-Tap to USB-C. The power supply works in both directions, i.e. with this adapter the battery can supply and receive power. Due to its size and weight, it is smaller and lighter than a conventional charger. Technical Data Bi-directional transfer from D-Tap to USB-Cmaximum power transmission: 100WD-Tap Output / Input: 12V – 16,8V, 10AUSB-C Output / Input: 3V – 20V, 5Aintelligent recognition of charging protocolsSupported charging protocols: FCP, AFC, SCP, DRP, Try SRC, PD3.0, QC2 / QC3.0 / QC3.0+automatic adjustment of the output voltageProtection against over/under voltage, short circuit and overload of the battery packStand-by power consumption: 0,18mALED control light (blue light during operation, no light when not connected)Material: aluminum alloy, plasticDimensions: 250 x 35 x 17mm (L x B x H)Weight: 52gr
SHAPE 100W D-TAP TO USB-C BI-DIRECTIONAL CHARGING ADAPTER SKU: DTUC This 100W D-TAP to USB-C adapter is engineered to work seamlessly with USB-C to USB-C charging cables, making it the ideal partner for SHAPE 450W Fast Charger. It’s your go-to solution for charging batteries with D-Tap ports, including popular Gold Mount, V-Mount, and BP-U batteries. Say goodbye to the hassle of carrying multiple chargers for different battery types. 100W D-tap to USB-C Bi-Directional Charging AdapterIs used in combination with USB-C to USB-C charging cables with SHAPE’s 450W Fast Charger to charge batteries with D-Tap ports (Gold Mount/V-Mount/BP-U)Uses PD charging protocol Type C10-16.8 V, 10 A output on D-TapType C Output / Input: 3.3-20V, 5ALED light to confirm charge. Technical dataMaterial: Aluminum-AlloyColor: BlackStand-by Power Consumption: 180uALED Status: Blue Light - NormalTurn Off – Disconnect or Protocol not SupportedD-Tap Output/Input: 10-16.8V, 10A. (+,- Pins Identified)Type-C Output/Input: 3.3V-20V, 5A (Intelligent Recognition on Charging Protocols, Auto-adaptation on Output Voltage & Current)Dimensions: 260mm(L) x 36mm(W) x 17mm(H)Weight: 49g
TILTA Nucleus-M 3-Pin to 7-Pin Motor Power + Arri R/S Cable SKU: RS-03-AM Compatible with any 3-pin Fischer R/S port: Arri Alexa SXT, Arri XT, Arri Amira, Arri Alexa LF Tilta 3-pin to 7-pin cable for the Nucleus-M allows you to power the motors from 3-pin power while also giving you run/stop capabilities in camera systems that support it. To power all of the motors, simply plug this cable into one of the motors and then daisy chain power to the other motors using the Nucleus-M 7-pin to 7-pin power cables. Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and handles.