8Sinn V-Mount Battery Plate 2xD-TapSKU: 8-V-MBP-2D-TapV-Mount batteries are one of the most popular solutions for powering your camera rig and assisting accessories. The presented battery plate converts the battery's current and voltage, to allow you to power up all your devices. Dimensions: Length: 142mm, Height: 11mm, Width: 81mmWeight: 151gFeaturesV-mount2 x 50W D-tap inputAutomatic lockABS plastic + aluminum
Blackmagic URSA VLock Battery Plate CINEURVLBATTAD VLock compatible battery plate for attaching third party batteries to URSA / URSA Mini Cameras. Includes a D-Tap port for accessory power
Core SWX Core-SumoVSKU: SUMOV Core SWX Core-SumoV is a Double V-mount kit with coiled powertap to 12″ XLR 4-pin for Atomos Sumo Input: DC 11-17vOutput for Monitor: DC 11-17v, Unregulated 4-Pin XLR FemaleOutput for P-tap: DC 11-17v, UnregulatedSize: 8,25 cm x 13,97 cm x 1,27 cmWeight: 0,18 kg
core swx CXV-C3MK The Core SWX CXV-C3MK v-mount plate is specifically designed for select Canon EOS Cine cameras that accept DC 4-pin XLR input including the Canon C300 Mark III and Canon C500 Mark II. It directly mounts to the accessory bay on the rear of the camera, allowing use of 14.4V V-mount batteries while also leaving the camera’s battery bay available for a BP-A style pack for hotswapping capabilities. To power additional accessories, it’s equipped with two powertaps and one USB. Direct mount for Canon EOS Cine cameras with DC 4-pin XLR inputInput: 11.9vdc-16.8vdc, UnregulatedOutput for camera: 11.9vdc-16.8vdc, UnregulatedPowertap: DC 11.9-17v, UnregulatedUSB: DC 5v, Unregulated
Core SWX Battery Plate for Sony PXW-FX9 SKU: CXV-FX9 The CXV-FX9 mounts directly to the back of the Sony PXW-FX9, as an alternative power option to the Sony XDCA-FX9. The milled aluminum product inserts into the battery slot of the camera and also attaches into the top of the camera (with included screw hardware) to provide a secure platform for mounting v-mount batteries directly onto the FX9 camera. It has a 19.5v DC output with a visual low battery warning LED and a 4-pin XLR DC input for hotswapping between external and on-board power. In addition, it’s equipped with two powertaps to power additional accessories. A USB firmware update port on the rear ensures future compatibility with camera firmware updates. Input: 11.9vdc-16.8vdc(on-board and 4p XLR DC-in). Inputs are hot swappable.Output for camera: DC 19.5vPowertaps: DC 11.9-17v, UnregulatedSize: 13,72 cm x 8,51 cm x 9,40 cmWeight: 0,54 kgFirmware port: USB MicroLED power indication: Bi-colour(red/green)
Core SWX CXV-KOMU BP to V-Mt plate direct mount for RED KomodoLeaves the camera’s DC input available for AC power and battery hot-swapWhen used with “smart” batteries that pass SMBUS data like Core SWX batteries, the camera will read battery percentage and runtimeEquipped with 3 DC output ports: P-Tap, USB, and 2pin LemoThe plate has a reinforced V-Mount locking mechanismRed Approved! Specifications Input: 11.9vdc-16.8vdcOutput for camera: DC 7.4v, Dual Canon BP backingPowertap: DC 11.9-17v, Unregulated2p Lemo: DC 11.9-17v, UnregulatedUSB: DC 5v, UnregulatedFirmware port: USB MicroLED power indication: Bi-color(red/green)
Core SWX CXV-TS-VRAP The Core SWX CXV-TS-VRAP connects to the v-mount of the DSMC3 Raptor to allow you to attach two V-mount battery packs(full size, mini or micro) to the rear of the camera. Different from some other plates, the all-aluminum build of this plate makes it feel like part of the camera. The build quality is next level and we have added some new features on this plate we’ve never done before. Since the Raptor outputs are found on the rear of the camera, this hotswap allows you to slide out the right side mount plate to the proper depth so as to not block the inputs and outputs of the Raptor camera. The set screw then locks the positioning in place allowing you to accommodate any size battery packs. A storage slot with magnetic hold keeps the allen key in place to reposition at any time. Choose between discharging both battery packs at the same time equally or one and then the other. To draw from both batteries equally, switch the button to the “I I” setting. When the switch is in the “I+I” setting, it will draw power from the camera operator side battery first, and then move to the other. Either way you choose, you can still hot swap batteries to keep continuous power going to your camera and accessories. All mode changes should be done prior to camera startup. The switch is deactivated once power is being drawn from the plate. Features RED V-Raptor Sharkfin V-mtAllows you to mount two packs and hotswap on the RED Raptor for extended runtimesAllows you to use other size batteries instead of just micro sized packsInput: DC 11-17vOutput for Camera: DC 11-17v, Unregulated ParalleledOutput for 2x P-Tap: DC 11-17v, Unregulated, 7.2A max
Core SWX Direct Connect for APX-360HVSKU: HLX-2HV-DC Core’s patent pending Direct Connect plates allow the light owner to quickly exchange the V-mount plates on their Aputure 600-series light to support Apex high voltage packs along with Core’s Helix series of packs. The beauty of these plates is that they require minimal technical skill to connect and still allow you to use all your 14v v-mount packs.To exchange the plates on your Aputure 600-series light unscrew your current v-mount plates, snip the wiring of the existing plates and the connect blocks, clip our direct plates onto the existing wiring and screw back on the Apex Direct Connect plate. No soldering skills or tools required.This modification is only required so to leverage the high voltage efficiencies of the Apex HV packs. Standard APX-360V packs will work without any modification to the lighting ballast. Input: DC 11-34vOutput for Light: DC 11-34vSize: 8,26 cm x 13,97 cm x 1,27 cmWeight: 0,18 kg
Core SWX GP-S V-Mount Camera Plate V-Type plate mounts on to the camera to provide a quick release connection with V-Type mount batteries. The Core SWX GP-S includes a P-Tap port to power an on-board light.
Core SWX GP-S-C3MK2 Core SWX GP-S-C3MK2 is a V-mount Plate with 2 Powertaps and Lemo compatible with the Canon C300 MKII and Canon C200. The GP-S-C3MK2 plate is outfitted with the specific lemo connector needed to power the camera. In addition, the C300 mount plates include two unregulated PowerTap ports to power 12v accessories. The GP-S-C300MK2 will work with all V-Mount battery packs. Input: DC 11-17vOutput for Camera: DC 11-17vOutput for Two P-Taps: DC 11-17v, UnregulatedSize: 8,25 cm x 13,97 cm x 1,27 cmWeight: 0,18 kg
Core SWX GP-TS V-Type HotSwap Adapter Plate The Core SWX GP-TS Hotswap adapter mounts directly to the existing v-type plate on the camera and allows for continuous battery operation. Because the batteries aren't 'stacked' on one another, you can easily remove the depleted battery while the leaving the other battery connected so that their is no down time. It can provide up to 260wh at only 6lbs. Not recommended with XP-L190Si battery model. Compatible with all V-Mount Brick Batteries. V-Type HotSwap Adapter Plate Technical data Input DC 11-17vOutput for Camera DC 11-17v, Unregulated ParalleledOutput for P-Tap DC 11-17v, UnregulatedSize12.07 cm x 13.97 cm x 8.89 cmWeight 0.73 kg
Core SWX GP-TS-SFF The Core SWX GP-TS-SFF is a short form factor Hotswap Shark-fin adapter that mounts directly to the existing v-type plate on the camera. It allows for continuous battery operation, and for additional accessories, it has 4 powertaps. Since the batteries aren’t ‘stacked’ on one another, you can easily remove the depleted battery while leaving the other battery connected so that there is no down time. Specification: Input: DC 11-17vOutput for Camera: DC 11-17v, Unregulated ParalleledOutput for 4x P-Tap: DC 11-17v, Unregulated, 7.2A maxSize: 11,68 cm x 8,89 cm x 11,94 cmWeight: 0,54 kg
Core SWX Helix retrofit V-mount plates for Teradek MAX transmitters SKU: HLX-TK-V Core SWX’s Helix retrofit plates for Teradek MAX transmitters allows you to mount the Teradek transmitter in-line with Helix V-Mount on-board battery power while maintaining high voltage throughput to the camera. Current Teradek MAX TX’s only support 14v battery systems. The Helix retrofit V-mount plates provide a solder-less, interconnect solution to exchange the current V plates, for Helix V battery mount plates. As the MAX TX’s can only accept up to 28v, there is a limitation for in-line usage of the transmitters in high voltage camera builds. The Helix retrofit plates provide a safe and secure power pass through to the high voltage accepting camera while providing a DC 12v 2pin connection to safely power the Teradek MAX transmitter. To complete the conversion you must unscrew the two plates on the MAX transmitter and disconnect the power pass through(yellow 2pin connector) and transmitter power connector(red 2pin connector). Then connect the Helix power pass through connector through the transmitter, and reconnect the transmitter power connector from the Helix battery mount to the transmitter. The entire process takes less than 10minutes! HLX-TK-V technical data Input: DC 11-34v Output for Camera: DC 11-34v(dependent on on-board battery connected to mount plate) Output to transmitter: 12v Dimension: 8,26 cm x 13,97cm x 1,27 cm Weight: 0,18 kg Compatibility: Supports standard 14v V-mt for High Voltage, only supports Helix V-mt
Core SWX HLX-BABV-DC SKU: HLX-BABV-DC The Core SWX HLX-BAB-V mounts directly to ARRI LF and Alexa to provide a direct connection to the camera and has a v-mount front. When coupled with HELIX packs, it outputs up to 33.6vdc. It also accepts standard V-mount 14v battery packs. Fearures: V-mount Helix battery mount plate for ARRI LF and Alexa cameraDirectly mounts onto cameraOn-Board Helix packs output up to 33.6vdcAlso accepts 14v v-mount packs Technical data Mount input: DC 11-34v Output for Camera/P-Taps: DC 11-34v, Unregulated
Core SWX HLX-BABV-S35 SKU: HLX-BABV-S35 The HLX-BABV-S35 mounts directly to ARRI Alexa 35 to provide a direct connection to the camera when removing the B-mount connection, to accept Helix V-mount battery packs. The mount plate provides high voltage to the camera and will also work in conjunction with ARRI PDM-1 and AEM-1 modules. Direct connect to use v-mount batteries on ARRI Alexa 35Seamlessly integrates with the ARRI Alexa 35Supports all Helix V-mount packs to provide high voltage to the cameraMount input: DC 20-34vOutput for Camera: DC 20-34v
Core SWX HLX-TS-SFF SKU: HLX-TS-SFF The Core SWX HLX-TS-SFF is a v-mount to v-mount sharkfin plate that accepts HELIX battery packs and standard 14v packs. When two HELIX battery packs are on-board and connected to a HLX mount plate, the adapter can output both 11-17vdc and 22-34vdc. A separate pin set for high voltage allows for safe power transmission. Features Hotswap/Sharkfin V-Mount PlateAccepts both Helix packs to connect to HLX-BAB-V mount plate to output 33.6vAlso accepts 14v V-mount packs for parallel standard voltage operation Technical data Mount input: DC 11-34v Output for Camera/P-Taps: DC 11-34v, Unregulated
Core SWX HLX-VEN-V SKU: HLX-VEN-V The Core SWX HLX-VEN-V mounts to the Sony Venice with v-mount back with and without the RS7 module, and has a v-mount front. RS loops through port for start/stop. It passes standard 11-17vdc to camera. With HELIX packs, 100% efficient power is transmitted to 3pin Fischers. With 14v packs, the mount plate boosts voltage to 24v to 3pin Fischers connectors. Features On-Board Sony Venice V-Mount PlateV-mount backingIncludes start/stop pass through cableOffers 2x 3p Fischer 24v with boost converter for all 14v packsWith Helix mounted, 33.6v pass through to 3p Fischer Technical data Mount input: DC 11-17v Output for Camera/P-taps: DC 11-17v 3pin Fischer: DC 24-34v
Core SWX PMC Plate Series for Sony Burano / Venice Introducing our versatile Power Management Control plate tailored for Sony Burano and Venice cameras, offering seamless adaptation and expanded power options. Notably, the Power Management Control plate features additional power outputs, including 2 PTAPs, a USBCPD output, and an HRS 4-pin 12V output, ensuring comprehensive connectivity on set. The Hotswap capability allows for uninterrupted power transitions between the on-board battery and an 11-17V DC power input, minimizing downtime during crucial production moments. For enhanced flexibility, the plate incorporates an I/O breakout connection to connect our Burano I/O Module power extension(only for Sony Burano) This extension provides supplementary power outputs, further catering to the diverse needs of professional filmmakers.The on-board color display on the operator-side screen presents vital information, including key voltage and battery percentage details. When smart battery packs are attached, the display intelligently shows battery percentage data, while voltage information is consistently available. Key Features Adapter plate for Sony Burano and Venice camerasAdditional outputs: 2 PTAPs, USBCPD output, HRS 4-pin 12V outputHotswap capability between on-board battery and 11-17V DC power inputI/O breakout for connecting Core’s Burano I/O Module extension(only for Sony Burano)On-board color display shows voltage and battery percentage information (smart battery packs enable percentage display) Specifications Output to Camera/Dtap: DC 11-16.8vUSB-C PD Output: DC 5v/9v/15v/20v, 45wWeight: 0,59 kg
Core SWX Riser Plate for Nanlite Ballast SKU: HLX-SGPS-FZ The V-to-V adapter plate raises the lower V-mount connection on a NANLITE Ballast so that you can mount an APEX LV Battery Pack on the sled without mechanical interference. Technical data Input: DC 11-17v Output for Light: DC 11-17v, unregulated Size: 8,3 cm x 14 cm x 3,8 cm Weight: 320 g
Core SWX RM-GPTS-DSMC2 The Core SWX RM-GPTS-DSMC2 is a 15mm rod mount bracket with dual v-mount battery plates allow for continuous battery operation and hot swapping packs on the fly. By having two v-mount battery packs mounted you can easily remove the depleted battery while the leaving the other battery connected so that there is no down time. The bracket is compatible with all v-mount battery packs to provide a secure mounting surface for your rig setup. The system is terminated with a 18″ 6-pin RED LEMO to power your RED DSMC2 as well as one ptap output for powering accessories. The cheese plate features many 1/4-20 thread mounting points for attaching devices, arms, etc. Rods NOT included Features 15mm rail mount cheese plate with a sharkfin v-mount battery plate and 18″ 6-pin RED LEMO for RED DSMC2Features a dual v-mount battery plate which allows for continuous battery operation and hot swapping packs on the flyCompatible with all v-mount battery packs to provide a secure mounting surface for your rig setupFeatures a 18″ 6-pin RED LEMO to power your RED DSMC2 as well as one ptap output for powering accessoriesThe cheese plate features many 1/4-20 thread mounting points for attaching devices, arms, etc
Core SWX RMV-BMPC4 SKU: RMV-BMPC4 The Core SWX RMV-BMPC4 is a 15mm rod mount bracket with v-mount battery plate. The bracket works with all v-mount battery packs to provide a secure mounting surface for your rig setup. The Cheese Plate can be configured to mount vertically or horizontally, based on balance preference. The system is terminated with a 10″ 2-pin coil cable to power your Blackmagic Design Pocket 4K or 6K as well as one p-tap output for powering accessories. The cheese plate is configured with many 1/4-20 thread mounts for attaches devices, arms, etc., along with a soft Velcro rear backing to quickly attach a wireless audio RX, a wireless video RX, etc. without the need for additional hardware. Features 15mm rail mount cheese plate with v-mount battery plate and 10" 2-pin coiled cable for BMD Pocket 4K/6KWorks with all v-mount battery packs to provide a secure mounting surface for your rig setupThe Cheese Plate can be configured to mount vertically or horizontallyFeatures a 10″ 2-pin coil cable to power your Blackmagic Design Pocket 4K or 6K as well as one p-tap output for powering accessoriesThe cheese plate is configured with many 1/4-20 thread mounts for attaches devices, arms, etcSoft Velcro rear backing to quickly attach a wireless audio RX or a wireless video RX Rods NOT included
Core SWX RMV-KOM2 The Core SWX RMV-KOM2 is a 15mm rod mount bracket with v-mount battery plate. The bracket works with all v-mount battery packs to provide a secure mounting surface for your rig setup. The Cheese Plate can be configured to mount vertically or horizontally, based on balance preference. The system is terminated with a 10″ 2-pin coil cable to power your RED Komodo as well as one p-tap output for powering accessories. The cheese plate is configured with many 1/4-20 thread mounts for attaches devices, arms, etc., along with a soft Velcro rear backing to quickly attach a wireless audio RX, a wireless video RX, etc. without the need for additional hardware. Features 15mm rail mount cheese plate with a V-mount battery plate and 10″ 2-Pin coil cable for RED KomodoWorks with all v-mount battery packs to provide a secure mounting surface for your rig setupThe Cheese Plate can be configured to mount vertically or horizontallyFeatures a 10″ 2-pin coil cable to power your RED Komodo as well as one p-tap output for powering accessoriesThe cheese plate is configured with many 1/4-20 thread mounts for attaches devices, arms, etc.Soft Velcro rear backing to quickly attach a wireless audio RX or a wireless video RX
Core SWX Snap IT for V/G MountConversion Plate to use Snap battery on V or G-mount DevicesThe SNAP ‘IT’ Interface Terminal Adapter bridges the gap between Core SNAP battery ecosystem and V-Mount or G-mount devices, providing a seamless charge and discharge interface.Designed for efficiency and flexibility, the V-SNAPIT allows users to power V-Mount cameras, monitors, lights, and other professional equipment using Core’s innovative SNAP battery system.The G-SNAPIT allows users to power G-Mount cameras, monitors, lights, and other professional equipment using Core’s innovative SNAP battery system.With a compact and durable design, the SNAPIT integrates effortlessly into production setups, offering a secure V-Mount connection while enabling hot-swappable operation for continuous power. A rear toggle switch allows users to choose between charge and discharge mode, offering full control over power flow for ultimate versatility Whether you’re using SNAP packs in the field or the studio, this adapter provides a streamlined solution for those looking to maximize compatibility without adding unnecessary bulk.FeaturesV/G-Mount to SNAP Compatibility - Enables Core SNAP battery packs to charge and power V/G-Mount devicesCompact & Durable Design – Minimizes rig clutter while ensuring a secure and stable connectionHot-Swappable Power – Swap SNAP battery packs seamlessly for uninterrupted operationVersatile Power Delivery – Supports a wide range of V/G-Mount cameras, monitors, and production gearEfficient Workflow Integration – Simplifies power management by eliminating the need for multiple battery ecosystems.
Core SWX V-Mount Conversion Plate A-GP-S SKU: AGPS The Core SWX A-GP-S is a temporary solution to allow the use of V-Type batteries on 3-stud configured cameras. It can also be used as a charge adapter, enabling you to temporarily charge V-Type batteries on PRO-X series 3-Stud charging equipment. Core SWX A-GP-S Technical data Input DC 11-17vOutput for Camera DC 11-17v, UnregulatedOutput for P-Tap DC 11-17v, UnregulatedSize 8.26 cm x 13.97 cm x 3.81 cmWeight 0.32 kg