Blackmagic ATEM Streaming Bridge The ATEM Streaming Bridge is a video converter that lets you receive a H.264 stream from any ATEM Mini Pro and convert it back to SDI and HDMI video. This means you can send video to remote locations around your local Ethernet network, or via the internet globally! This is possible because it uses advanced H.264 codecs for higher quality at very low data rates. Broadcasters and bloggers alike can collaborate to create global networks of ATEM Mini Pro remote broadcast studios. Setup is easy. With the ATEM software utility you can create setup files that you can email to remote ATEM Mini Pro studios. Blackmagic ATEM Streaming Bridge is the perfect way to use ATEM Mini Pro as a remote broadcast studio.
Blackmagic Studio Converter With 10G Ethernet on Blackmagic Studio Converter and Blackmagic Studio Camera 4K Pro, you can connect all camera signals using one Ethernet IP link connection. That means the camera feed, return program feed, timecode, reference, tally, talkback and control are all sent down the single cable. That's the same benefits of SMPTE fiber, but the standard 10G copper Ethernet cable is much lower cost. The Blackmagic Studio Converter allows breakout of all the video, audio and talkback connections at the studio end. It also includes a massive power supply that powers the camera down the Ethernet cable, so you don't even need a power source near the camera!
Blackmagic Studio Fiber Rack Kit Blackmagic Studio Fiber Rack Kit mounts up to 2 Blackmagic Studio Fiber Converters side by side with this lightweight kit that’s perfect for road cases or equipment racks
Blackmagic Teranex Mini Smart Panel CONVNTRM-YA-SMTPN The Teranex Mini’s optional premium front panel includes straight forward push buttons and a built in LCD screen for easier set up. The LCD screen also displays the video going through each of your converters! The premium front panel is perfect when you’re out in the field or on set without external monitors, or even when you have multiple converters mounted in equipment racks and just want to see what’s going through them all! The Teranex Mini Smart Panel takes the guesswork out of using a converter! Now you can see the video going through your converter using the built in LCD screen. The panel also features push buttons and an easy to navigate on-screen menu that lets you quickly adjust and save settings. The Teranex Mini Smart Panel is perfect when you’re out in the field or on set without external monitors, or even when you have multiple converters mounted in equipment racks and just want to see what’s going through them all!
Kiloview P3 4G Module4G module for use with the Kiloview P3 5G Bonding Video Encoder
Kiloview P3 5G Module5G module for use with the Kiloview P3 5G Bonding Video Encoder
Kiloview P3 Replaceable Battery Replaceable 3500 mAh @ 7.2 V / 25.2 W battery for the Kiloview P3 5G Bonding Video Encoder
Kiloview RF02Cradle Series RF02, the flagship rack-mounted media platform from Kiloview, is your ultimate media management center. Within its 2RU high-density structure, the RF02 supports flexible configuration of up to 18 card modules, enabling encoding, decoding, media gateway, bonding, etc. Its modular design replaces the clutter of multiple standalone devices with a streamlined, unified solution, providing the most complete and lightweight AV-over-IP solutions for broadcast-grade production, medical imaging transmission, remote education, live event streaming, and more.High-Speed ConnectivityThe RF02 provides three 10Gbps SFP+ fiber Ethernet interfaces and one 10Gbps RJ45 Ethernet interface, ensuring effortless handling of high-bandwidth NDI streams.Integrated Network SwitchEquipped with a built-in 1G/2.5G network switch module that interconnects all module cards, RF02 supports a full range of capabilities including encoding, decoding, NDI conversion, media gateway, bonding, etc.Efficient Data FlowRF02 streamlines the data flow within the platform, eliminating the need for external network switches. This setup not only reduces setup complexity and costs but also enhances the reliability of data transfer.Unified ControlRF02 is powered by an ARM64 main controller running a customized version of Kiloview’s KiloLink Server Pro, purpose-built for this platform. It enables automatic discovery, monitoring, and configuration of all module cards through a unified interface.On-Premise Bonding ServiceWith media gateway card FMG-400, RF02 can serve as an on-premise server for Kiloview’s P Series 4G/5G wireless bonding encoders, providing secure and reliable remote device and bonding management. Paired with a decoding card, it can seamlessly output remote video streams to SDI or HDMI at various resolutions.Streamlined OperationsThe platform automatically identifies and manages all workflow streams, allowing users to monitor status, assign sources, and configure settings with ease—greatly reducing manual effort while ensuring stable, low-latency transmission.Technical dataMain Controller ModuleProcessor: 8-core ARM64 high-performance processor (Cortex) A73@1.8GHzMemory: 12GB DDR4Storage: 128GB EMMCOperating System /Software: Linux 5.10/KiloLink Server Pro RF versionManagement and Control: Web/ HTTP APINetwork Switch ModuleService Cards Connection: 18 x 1Gbps/2.5Gbps Adaptive Ethernet (Slot1/2 can support up to 10Gbps)External Connection: 3 x 10Gbps SFP+ Optical Ports (IEEE 802.3ae) 1 x 10Gbps RJ45 Ethernet portType: Three-layer managment switch/VLAN supportSwitching Capacity: 120GbpsOverall ChassisDisplay: 3-inch LCD color display (non-touchable)Buttons: 4 (Power/Flip left/Flip right/Select)External Connection: 3 x 10Gbps SFP+ Optical Ports / 1 x 10Gbps RJ45 Ethernet portHeat dissipation: Self-Adjust heat dissipation/ Auto-temp controlPower supply: Dual hot-swappable modular power supplies with redundant backup (configurable to single power mode)Single module specifications: AC 100-240V, 7A(Max), 60/50Hz, 500W MaxDimension:s 483mm x 487mm x 88 mm (2RU)Working Temperature: -10°C to 50°C
Kiloview RN01 1RU Frame for NDI Encoders/Decoders N3,N4,N30,N40,N6The NDI RN01 frame is simple in structure and flexible in configuration. It can integrate 4 NDI High Bandwidth video encoder/decoder devices in one frame to combine various models. It’s portable and convenient when there is a number of units in your workflow.Freely Mixing with 4 Encoding and Decoding Modules in One ChassisExquisite Design and Modular DesignEasy to Use and InstallTechnical dataCompatible Devices: N3/N4/N30/N40/N5/N6Weight: 0.5kgSize: 483x150x44mmAccessories: Thumb Screw x4
Kiloview RN03 3RU Frame for NDI Encoders/Decoders N3,N4,N30,N40,N6The NDI RN03 installation frame is exquisite and flexible in configuration. It integrates with 10 NDI High Bandwidth video encoder/decoder devices mixing with different models such as N3, N30, N4 and N40. Up to 10 NDI High Bandwidth Video encoder/decoder in a ChassisIntegrated Modular Design, Easy Installation and DurablePowerful Cooling FanMixed Match of Kiloview N Series DevicesTechnical dataCompatible Devices: N3/N4/N30/N40/N5/N6Weight: 1.8kgSize: 483x94.3x133.5mmAccessories: thumb screw x10
Lumantek ez-Rack Lumantek Rackmount may be one of the simplest looking product in LUMANTEK. However, it is the one product which can save you from all the cables and mess caused by multiple converter connections. Additionally, you only need 2 power inserts rather than using 1 power adapter for each converter. You can fill this rackmount with up to 10 converters. Install your converters ahead and simply carry them as a rack type device. All LUMANTEK converters fit right in. Use a clip and a screw to fix the converter into the rackmount. Very easy to install any LUMANTEK converters. The size of the rackmount can be 2 RU or 3 RU depending on the size of the converters you install. But it will perfectly fit into your rack with other devices. Don't use 1 adaptor per each converter. LUMANTEK's rackmount will save you from the trouble. Use only 2 adaptors to power all 10 converters.
OSPREY Talon Rackmount Kit The Talon Rackmount Kit fits up to three single channel Talon 4K Encoders or Decoders in a compact 1U configuration. Active cooling modules ensure reliable operation. No additional power supplies are required, the Encoder/Decoder power supply will power the cooling module and the Encoder/Decoder imultaneous with a loop through configuration. Features for up to three single channel Talon 4K Encoders/Decodersactive coolingno additional power supply required Compatibility Talon 4K-SC EncoderTalon UHD-SC EncoderTalon 4K-SCD DecoderTalon UHD-SCD Decoder