8Sinn V-Mount Battery Plate 2xD-TapSKU: 8-V-MBP-2D-TapV-Mount batteries are one of the most popular solutions for powering your camera rig and assisting accessories. The presented battery plate converts the battery's current and voltage, to allow you to power up all your devices. Dimensions: Length: 142mm, Height: 11mm, Width: 81mmWeight: 151gFeaturesV-mount2 x 50W D-tap inputAutomatic lockABS plastic + aluminum
AES POWER BOXUnique mobile power station that adapts to all your needs. With the energy of one or two AES SuperPacks with 1440 Wh each, the AES power box has a maximum capacity of 2880 Wh. The only modular power station based on our proven LiFePO4 technology that is as flexible as the ways in which it can be used. Packed with the energy of up to 2 AES SuperPacks, you can not only power your campsite, your boat or your power tools, but also use it as energy storage for your balcony power stations or your solar panels. Easily transportable thanks to its modularity, the AES power box even serves as a power source for your electric vehicle or as a safety supply to bridge minor power failures (switching less than 0.03 seconds) at events and/or on construction sites. By connecting two fully equipped AES power boxes in parallel, you can increase the capacity from 2.8 kWh to 5.6 kWh. You can vary the power duration of your AES power box individually by flexibly equipping it with AES SuperPacks - depending on how many AES SuperPacks you have available.Key featuresExpandable capacityReliable and safe technologyRechargeable with solar panelsLiFePO4 technology, therefore durable and extremely safeEmergency power supply> 3000 charging cycles with 80% residual capacitySmart BMS with CAN bus communication1x rollboard with 4 extra stable, 360° rotating, smooth-running professional castors with parking brake. (The rollboard can also be permanently mounted on a surface, e.g. as a holder/anti-slip device in the vehicle. The wheels are removable).Technical featuresCapacity: 60 Ah (2x 30 Ah)2 AES SuperPacksEnergy: 1440 Wh with one AES SuperPack / 2880 Wh with two AES SuperPacksUSB-C output: 30 W (max.)USB-A output: 15 W (max.)Inductive charging: 15 WSolar charging input: 12-60 V, max. 25 ANet weight: 14 kgFully equipped weight: 41 kg (incl. two AES SuperPacks (12 kg) and the AES Mobility Board (3 kg))Dimensions: 510.5 x 349 x 318 mmInputAC charging input power: 800 W with one AES SuperPack / 1600 W with two AES SuperPacksAC charging input voltage: 230 V, 10 A, 50/60 HzOutput powerOne: AES power box: 2.3 kTwo: AES power boxes: 3.6 kW in parallel operation
Ambient AK-HS4-PC2M Power Distribution Cable Ambient power cable for ARRI ALEXA 12-V output. Adaptor cable with Hirose to Anton Bauer D-Tap connector 4-pol Hirose male (2.5A) straight to 2-pol Power-Con maleLength approx. 60 cm
Axcom SM-CPVM-1 Charger for Sony V-Mount Li-Ion batteries via D-TAP connection 2A charging current Compatibility: for Sony V-Mount Battery Via D-TapVoltage: Charging Voltage - 16,8V / Input Voltage - 100-250V
Axcom SM-CPVM-2 + 2 x U-SVLO-150UD Set includes 1 x Axcom SM-CPVM-22 x Axcom U-SVLO-150
Axcom SM-CPVM-2 2-Slot V-Mount Battery Charger of the german manufacturer axcom with 2 slots to charge two V-Mount batteries simultaneously. With a 4 Pin XLR Output (60W 15V 4.0A). The weight is 1kg. Axcom SM-CPVM-2 includes charger, mains cable, XLR extension cable and manual. Input: 90V - 240VOutput for V-Mount Batteries: 16.8V 2.65AOutput 4 Pin XLR: 60W 15V 4.0A Charging times 4.4Ah approximately 2,5 hours6.6Ah approximately 3,8 hours8.8Ah approximately 5,0 hours11Ah approximately 6,3 hours13,2Ah approximately 7,6 hours
Axcom SM-CPVM-4 V-Mount battery charger of the german manufacturer axcom with 4 slots to charge four V-Mount batteries simultaneously. Axcom SM-CPVM-4 with a 4 Pin XLR Output (60W 15V 4.0A). The weight is 2,8kg. Includes 1 x Charger1 x Mains cable1 x XLR extension cable1 x Manual Features Input: 90V - 240VOutput for V-Mount Batteries: 16.8V 2.5AOutput 4 Pin XLR: 60W 15V 4.0A Charging times 4.4Ah approximately 2,7 hours6.6Ah approximately 4,0 hours8.8Ah approximately 5,3 hours11Ah approximately 6,6 hours13,2Ah approximately 7,9 hours
Axcom U-CSVLO-155-UDOriginal Axcom compact 14.8V 155Wh Li-Ion Micro battery for V-Mount/V-Lock with LED display, the perfect power solution for your professional filming needs. Designed for filmmakers and content creators, this compact and lightweight battery delivers a robust 155Wh capacity, ensuring you have the energy required for extended shooting sessions. Type: Li-IonVoltage: 14.8VCapacity: 155 WhFeaturesdouble D-Taplockable USB port + USB-C portGold-plated contactsPremium LG cells installedLED display with precise percentage and minute capacity displayUN3480 compliant shipping12 months Axcom warranty
Axcom U-CSVLO-47-UDCompact Li-ion battery for Sony V-Mount, V-Lock, Axcom U-CSVLO-47-UD is a cutting-edge solution designed to enhance your connectivity experience.This versatile device is engineered for optimal performance, making it an essential addition to your tech arsenal. The U-CSVLO-47-UD features advanced technology that ensures seamless data transmission and reliable connections, perfect for both personal and professional useFeaturesSuitable for: Sony V-Lock BP-L40, BP-L60, BP-L90, BP-L40A, BP-L60A, BP-L90A/65HCompact cube / micro designDurable quality cells from LGUSB and D-Tap connectionIlluminated contactsCapacity indicator LED12 months Axcom warrantyLockable USB connectionGold-plated contactsSuitable for carrying on passenger aircraftUN3480 compliant shippingTechnical dataType: Li-IonVoltage: 14.8VCapacity: 3,200mAh / 47.36 WhMax. Discharge current: 3.2A/ 100WVoltage (USB A): 5VCurrent USB A: 2,400mAhDimensions: 75 x 35 x 104.9 mm (W/H/D)Weight: 310 g
Axcom U-CSVLO-95-UDOriginal Axcom compact Li-Ion cube battery for Sony V-Mount/V-Lock is suitable for:Sony V-Lock BP-L40/L60/L90/L40A/L60A/L90A/65H. Axcom U-CSVLO-95-UD features both USB and D-Tap outputs, making it an ideal choice for a wide range of devices, from cameras to lighting equipment. With its robust capacity, the Axcom U-CSVLO-95-UD ensures extended shooting times, allowing you to focus on your creative vision without worrying about power interruptions. The Micro V-Mount design offers versatility and ease of use, fitting seamlessly into your existing setupType: Li-IonVoltage: 14,8VCapacity: 6.400mAh / 94,xx WhMax. discharge current: 6.4 A/ 100 WVoltage (USB A): 5VCurrent (USB A): 2,400mAhDimensions: 75 x 51 x 104.9 mm (W/H/D)Weight: 514gFeaturesUSB and D-tapGold-plated contactsPremium LG cells installedLED charge level indicatorSuitable for carrying on passenger airplanesUN3480 compliant shipping12 months Axcom warranty
Axcom U-CSVLO-99-UDV-Mount rechargeable battery Li-Ion Micro compact - 14.4V 98Wh with LED displayType: Li-IonVoltage: 14.4VCapacity: 6.8Ah, 97.92WhDimensions: 100.9x73.3x51.4mmFeaturesdouble D-Taplockable USB port + USB-C portGold-plated contactsPremium LG cells installedLED display with accurate percentage and minute capacity displayUN38.3: Suitable for carriage on passenger aircraftUN3480: compliant shipping - no class 9 labeling12 months Axcom warranty
Axcom U-SVLO-190-UD Axcom U-SVLO-190 Li-Ion V-Mount Battery 14,8V 190 Wh Features 14.8 V / 13 Ah / 190 Wh3-way LED capacity indicatorCells from SamsungWith D-Tap connector and 2.3 mm socketBuilt-in safeguards against overload, short circuit, over-discharge General Dimensions (WxHxD): 10.1 cm x 6.3 cm x 15.2 cmWeight: 1.25 kg
Axcom U-SVLO-230U The price / performance ratio is excellent when it comes to the Axcom company. The professional 230 Wh V-Mount battery Axcom U-SVLO-230, is an Samsung-quality cell battery. It ensures stability and impresses with a relatively low weight. The four-stage LED display indicates the current battery charge status. Equipped with a D-Tap output (P-TAP), and a DC output connector. U-SVLO-230 Technical data High-quality Samsung cellsCompatible with major camcorders on the market such as Panasonic VariCam, Sony PMW-F5 / F55, ARRI Amira / AlexaType: Li-Ion batteryD-TAP (P-TAP) output, DC outputVoltage: 14.8 VCapacity: 15,6Ah / 230WhOperating Temperature: -20 ° C to + 55 ° C
Blueshape BP A60 Battery Pack 96Wh SKU: BMBPA60 Blueshape BPA60 battery is compatible with Canon 14,4V 6700mAh, Canon BP-A60 and equivalent, 96Wh - 1 DTAP + 1 USB with LEDs Features Charge Indicator (4-Step LED) 1x D-Tap 1x USB (Type A) Technical Data Nominal Voltage 14,4V Charge Capacity 6700mAh Energy Capacity 96Wh Size: 41,5 mm x 69,7 mm x 95,1 mm Weight 440g
Blueshape BPU 90 Battery Pack 96Wh SKU: BPU90 Blueshape BPU90 battery is compatible with Sony 14,4V 6700mAh, Sony BPU-90 and equivalent, 96Wh - 1 DTAP + 1 USB with LEDs Features Charge Indicator (4-Step LED) 1x D-Tap 1x USB (Type A) Technical Data Nominal Voltage 14,4V Charge Capacity 6700mAh Energy Capacity 96Wh Size: 41,6 mm x 69,6 mm x 120 mm Weight 418g
BLUESHAPE MVQUICK V-Mount Hot Swap Adapter MVQUICK is a hot swap system to be installed as a battery interface between the camera (or any other V-lock compatible device) and the battery pack. The main purpose is to allow camera battery replacement without any power interruption through an automatic detection of the battery removal. Additionally, BLUESHAPE MVQUICK provides an alternative power source of about 21Wh to be used as UPS in case of a sudden power failure or extended power requirements. MVQUICK Features About up to 10~15 minutes runtime when used standalone as an UPS backup batteryInstallable on any V-Lock enabled deviceSelf charging through the installed battery, can be charged also on any V-Lock chargersAllow data communication from battery to cameraNEW: enhanced contact protection for safer air transport Technical data Nominal Voltage 14.8VVoltage range 10.8V ~ 16.8VNominal Capacity 1.5Ah, 21WhMax. discharge current 10ASize 142 mm 83 mm x 50mmWeight 0.49Kg1. LED indicators showing state of charge of internal battery2. Push button for capacity check3. Installation interface for external V-Lock battery4. Output connector (power outlet, to camera)5. Data communication selector to enable or disable battery communication to camera6. D-Tap auxiliary connector7. V-Lock interface for MVQUICK installation
Blueshape NPF 970 SKU: BMNPF970 Blueshape NPF970 battery compatible with Sony 7,2V 10050mAh , Sony NP-F970 and equiv.alent, 72Wh - 1USB output, 1 Micro USB charger input with LEDs. Features Charge Indicator (4-Step LED) 1 x USB (Type A) 1 x Micro USB Charge In (Micro-B) Technical Data Nominal Voltage 7,2V Charge Capacity 10050mAh Energy Capacity 72Wh Size: 38,2 mm x 70,8 mm x 74 mm Weight 330g
Core SWX Coiled D-Tap to 2-Pin Cable for Blackmagic Pocket 4K SKU: PTC-BMPC4 Core SWX PTC-BMPC4 is a Coiled P-Tap Cable to 2 Pin Connector for Blackmagic Design Pocket 4K. The cable extends from 18 to 48" in total length, providing the flexibility to use it on different parts of your camera rig. Input: DC 11-28vOutput: UnregulatedContracted Length: 18″Expanded Length: 48″
Core SWX Cube 200 200W Industrial AC Power Supply SKU: CUBE-200 The Core Cube is a lightweight, all aluminum 200w industrial power supply capable of powering the most power hungry cameras. The “Cube 200” is so compact, it fits in the palm of your hand, perfect for “Run and Gun” productions. Two XLR outputs provide up to 200w combined. The power supply has internal protections to protect the device against accidental misuse, shutting down and the resetting to operational status. AC input accepts 100-240VAC, making it useable worldwide. Includes an AC power cord. The Core SWX Cube 200 is fanless, and operates silently. SPECS Input Voltage: AC 100-240V 50/60Hz DC Output: 200W max(14.3v) Protection: Over Current, and Temperature Dimensions: 4.8″ x 3.3″ x 3.7″ Weight: 1.4lbs.
Core SWX Cube Plus XLR V-mt Core’s Cube Plus DC is a lightweight, all aluminum on-board power module capable of powering a camera or device, while simultaneously charging an on-board battery pack up to 3A per hour(~2hrs to fully charge a 98wh pack). The Cube Plus DC, when having an on-board pack mounted, is designed to act like an uninterruptable power source should DC input power be disconnected. Not only will the device switch from the DC power source to on-board power for the camera or device, but the two ptap connections are also backed up. The unit has a 4pin XLR DC input to accept 12 to 34 volts, providing you the flexibility of using various outputs from your block battery style, like Core’s Maverick MV6, or a AC to DC power supply. The Cube Plus DC has internal protections along with a replaceable 15A fuse. Features Lightweight, all aluminum on-board power moduleMounts on to a camera or device like a battery pack2x ptaps to power accessories(powered by both power supply or on-board battery)Acts like a UPS if DC Input is disconnected(as long as an on-board battery is mounted)Simultaneous charges a battery pack while powering a camera/device*Red and green status LEDs for charge and power to camera/deviceAll Aluminum design12-30v DC input voltageFanless and operates silentlyDC Output: up to 200w(dependent upon DC input power source)Quick Charge Current: up to 3A*Protection: Over Current, Voltage & TemperatureDimensions: 121,9 mm x 94 mm x 83,8 mmWeight: 544 gInput Voltage: DC 12-34v
Core SWX CUBE-PLV Core’s Cube Plus is a lightweight, all aluminum 120w on-board power supply capable of powering a camera or device, while simultaneously charging an on-board battery pack up to 3A (depending on the power supply load, charge speed may reduce) per hour(~2hrs to fully charge a 98wh pack). The Cube Plus, when having an on-board pack mounted, is designed to act like an uninterruptable power source should AC mains power be disconnected. Not only will the device switch from AC to on-board power for the camera or device, but the two p-tap connections are also backed up. The Core SWX Cube Plus has internal protections along with a replaceable 10A fuse. It accepts 100-240VAC, making it useable worldwide and it includes an AC power cord. Furthermore, it’s fan-less, and operates silently. Features Lightweight, all aluminium 120w on-board power supplyMounts on to a camera or device like a battery pack2x ptaps to power accessories(powered by both power supply or on-board battery)Acts like a UPS if AC mains is disconnected(as long as an on-board battery is mounted)Simultaneous charges a battery pack while powering a camera/device*Red and green status LEDs for charge and power to camera/deviceAll Aluminium design90-240 VAC worldwide compatible input voltageFanless and operates silently Technical data DC Output: 120W max(14.3v) to camera mains connection and 2x ptap.Quick Charge Current: up to 3A*Protection: Over Current, Voltage & Temperature Dimensions:121,9 mm x 94 mm x 83,8 mmWeight: 0,5 kgInput Voltage: AC 100-240V 50/60Hz
core swx CXV-C3MK The Core SWX CXV-C3MK v-mount plate is specifically designed for select Canon EOS Cine cameras that accept DC 4-pin XLR input including the Canon C300 Mark III and Canon C500 Mark II. It directly mounts to the accessory bay on the rear of the camera, allowing use of 14.4V V-mount batteries while also leaving the camera’s battery bay available for a BP-A style pack for hotswapping capabilities. To power additional accessories, it’s equipped with two powertaps and one USB. Direct mount for Canon EOS Cine cameras with DC 4-pin XLR inputInput: 11.9vdc-16.8vdc, UnregulatedOutput for camera: 11.9vdc-16.8vdc, UnregulatedPowertap: DC 11.9-17v, UnregulatedUSB: DC 5v, Unregulated
Core SWX Battery Plate for Sony PXW-FX9 SKU: CXV-FX9 The CXV-FX9 mounts directly to the back of the Sony PXW-FX9, as an alternative power option to the Sony XDCA-FX9. The milled aluminum product inserts into the battery slot of the camera and also attaches into the top of the camera (with included screw hardware) to provide a secure platform for mounting v-mount batteries directly onto the FX9 camera. It has a 19.5v DC output with a visual low battery warning LED and a 4-pin XLR DC input for hotswapping between external and on-board power. In addition, it’s equipped with two powertaps to power additional accessories. A USB firmware update port on the rear ensures future compatibility with camera firmware updates. Input: 11.9vdc-16.8vdc(on-board and 4p XLR DC-in). Inputs are hot swappable.Output for camera: DC 19.5vPowertaps: DC 11.9-17v, UnregulatedSize: 13,72 cm x 8,51 cm x 9,40 cmWeight: 0,54 kgFirmware port: USB MicroLED power indication: Bi-colour(red/green)
Core SWX CXV-KOMU BP to V-Mt plate direct mount for RED KomodoLeaves the camera’s DC input available for AC power and battery hot-swapWhen used with “smart” batteries that pass SMBUS data like Core SWX batteries, the camera will read battery percentage and runtimeEquipped with 3 DC output ports: P-Tap, USB, and 2pin LemoThe plate has a reinforced V-Mount locking mechanismRed Approved! Specifications Input: 11.9vdc-16.8vdcOutput for camera: DC 7.4v, Dual Canon BP backingPowertap: DC 11.9-17v, Unregulated2p Lemo: DC 11.9-17v, UnregulatedUSB: DC 5v, UnregulatedFirmware port: USB MicroLED power indication: Bi-color(red/green)