AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA FS8 Hybrid SDI/IP Media ProcessorThe FS8 is the new powerhouse multi-channel frame synchronizer and converter engineered to prepare SDI and SMPTE ST 2110 signals for production. FS8 combines frame synchronization, up/down/cross-conversion, frame-rate conversion, HDR/WCG processing, 3D-LUT-based and live color management, audio processing, delay management, and metadata handling, along with SDI to/from IP gateway, in a single, 1RU device. It is designed for cine-live productions, broadcast, production trucks, flypacks, live venues, studio and remote production environments where every downstream device must receive a predictable, standards-compliant signal, ensuring interoperability in even the most complex workflows.AJA FS8 features 8 independent channels of HD video processing with up to 4 channels of UHD video processing in an all new, easy-to-operate, visual node pipeline within a rich web interface. The video processors are fed from up to 16x 12G-SDI inputs (8x 12G-SDI BNCs plus 8x via optional SDI HD-BNC or Fiber SFPs) and 8x HD or 4x UHD ST 2110-20 (4x 25 GbE SFP) inputs for a total combination of up to 16 inputs. FS8 has full input and output signal routing, allowing any I/O port to be assigned to any processing channel. Audio connectivity has also been expanded from embedded SDI and MADI with the addition of Dante audio and ST 2110-30 audio connectivity building a massive 459x448 mono audio matrix!Designed to solve real production challenges, the FS8 has a robust suite of tools for configuration and troubleshooting signal paths including a built-in test signal generator with custom text overlay on each output for verifying processing and downstream routing without adding additional sources. FS8 presets reduce set up time with System, Vid Proc, Audio Proc, IP Config, and 3D LUT presets available. In addition to its web-browser based UI, the FS8 can be managed via the REST API by 3rd parties or customized control applications. ST 2110 discovery, registration, and control is available with NMOS IS-04, IS-05, and EMBER+. Redundant power supplies ensure reliable, mission-critical operation.

ANGELBIRD AV PRO CFexpress v4 Type ABuilt for professional filmmaking and demanding photography, the AV PRO CFexpress A delivers sustained high-speed performance across compatible Sony Alpha and Cinema Line cameras. Available in 400 GB, 800 GB, and 1600 GB capacities with VPG400 and VPG800 certifications, the lineup is designed for high-data-rate professional workflows. The cards are built to handle the most performance-intensive projects, including 8K RAW video and Sony X-OCN recording on the new FX5. Technical dataCapacity: 400 GB, 800 GB, 1600 GBForm factor: CFexpress™ Type AUnit dimensions: 28 x 2.8 x 20 mmUnit weight: ~ 2 g400 GBMax. read speed: 1870 MB/sMax. write speed: 1160 MB/sSustained read speed: 1700 MB/sSustained write speed: 1000 MB/s800 GBMax. read speed: 1870 MB/sMax. write speed: 1830 MB/sSustained read speed: 1700 MB/sSustained write speed: 1500 MB/s1600 GBMax. read speed: 1870 MB/sMax. write speed: 1850 MB/sSustained read speed: 1700 MB/sSustained write speed: 1600 MB/sInterface: CFexpress™ v4 Type A, PCIe 4.0 x1Features: Temperature sensor, TRIM, ECC, EMS protection, SMART, power managementData reliability: Built-in EDC, ECC functionDC input voltage 3.3 V ± 5 %Power usage: Sleep <50 mW, idle 0.55 W, max. 2.7 WHumidity (operating): 5 % to 85 % non-condensingTemperature (operating): -12/72 °CTemperature (storage): -20/85 °C

ANGELBIRD AV PRO CFexpress v4 Type ABuilt for professional filmmaking and demanding photography, the AV PRO CFexpress A delivers sustained high-speed performance across compatible Sony Alpha and Cinema Line cameras. Available in 400 GB, 800 GB, and 1600 GB capacities with VPG400 and VPG800 certifications, the lineup is designed for high-data-rate professional workflows. The cards are built to handle the most performance-intensive projects, including 8K RAW video and Sony X-OCN recording on the new FX5. Technical dataCapacity: 400 GB, 800 GB, 1600 GBForm factor: CFexpress™ Type AUnit dimensions: 28 x 2.8 x 20 mmUnit weight: ~ 2 g400 GBMax. read speed: 1870 MB/sMax. write speed: 1160 MB/sSustained read speed: 1700 MB/sSustained write speed: 1000 MB/s800 GBMax. read speed: 1870 MB/sMax. write speed: 1830 MB/sSustained read speed: 1700 MB/sSustained write speed: 1500 MB/s1600 GBMax. read speed: 1870 MB/sMax. write speed: 1850 MB/sSustained read speed: 1700 MB/sSustained write speed: 1600 MB/sInterface: CFexpress™ v4 Type A, PCIe 4.0 x1Features: Temperature sensor, TRIM, ECC, EMS protection, SMART, power managementData reliability: Built-in EDC, ECC functionDC input voltage 3.3 V ± 5 %Power usage: Sleep <50 mW, idle 0.55 W, max. 2.7 WHumidity (operating): 5 % to 85 % non-condensingTemperature (operating): -12/72 °CTemperature (storage): -20/85 °C

ANGELBIRD AV PRO CFexpress v4 Type ABuilt for professional filmmaking and demanding photography, the AV PRO CFexpress A delivers sustained high-speed performance across compatible Sony Alpha and Cinema Line cameras. Available in 400 GB, 800 GB, and 1600 GB capacities with VPG400 and VPG800 certifications, the lineup is designed for high-data-rate professional workflows. The cards are built to handle the most performance-intensive projects, including 8K RAW video and Sony X-OCN recording on the new FX5. Technical dataCapacity: 400 GB, 800 GB, 1600 GBForm factor: CFexpress™ Type AUnit dimensions: 28 x 2.8 x 20 mmUnit weight: ~ 2 g400 GBMax. read speed: 1870 MB/sMax. write speed: 1160 MB/sSustained read speed: 1700 MB/sSustained write speed: 1000 MB/s800 GBMax. read speed: 1870 MB/sMax. write speed: 1830 MB/sSustained read speed: 1700 MB/sSustained write speed: 1500 MB/s1600 GBMax. read speed: 1870 MB/sMax. write speed: 1850 MB/sSustained read speed: 1700 MB/sSustained write speed: 1600 MB/sInterface: CFexpress™ v4 Type A, PCIe 4.0 x1Features: Temperature sensor, TRIM, ECC, EMS protection, SMART, power managementData reliability: Built-in EDC, ECC functionDC input voltage 3.3 V ± 5 %Power usage: Sleep <50 mW, idle 0.55 W, max. 2.7 WHumidity (operating): 5 % to 85 % non-condensingTemperature (operating): -12/72 °CTemperature (storage): -20/85 °C

ANGELBIRD AV PRO SE CFexpress A 200 GB v4 Type ABuilt for creators who shoot both photo and video every day, the AV PRO SE CFexpress A 200 GB with VPG200 certification delivers reliable sustained performance for hybrid Sony shooters. From sports and weddings to nature and everyday productions, the card keeps pace when switching between stills and video or handling back-to-back sessions. Fast offloading gets your files onto your computer quickly, so you can get back to shooting. Technical dataCapacity: 200 GBForm factor: CFexpress™ Type AUnit dimensions: 28 x 2.8 x 20 mmUnit weight: ~ 2 gMax. read speed: 1870 MB/sMax. write speed: 570 MB/sSustained read speed: 1700 MB/sSustained write speed: 500 MB/sInterface: CFexpress™ v4 Type A, PCIe 4.0 x1Features: Temperature sensor, TRIM, ECC, EMS protection, SMART, power managementData reliability: Built-in EDC, ECC functionDC input voltage: 3.3 V ± 5 %Power usage: Sleep <50 mW, idle 0.65 W, max. 1.5 WHumidity (operating): 5 % to 85 % non-condensingTemperature (operating): -12/72 °CTemperature (storage): -20/85 °C

ATOMOS Shinobi 7 IISKU: ATOMSHB005The Atomos Shinobi 7 II provides a generous viewing area for video and photography. Its 7-inch Full HD touchscreen delivers a calibrated peak brightness of 2,800 nits, making it easier to assess focus, exposure and framing in bright ambient light. Weighing 401 g without a battery and featuring passive cooling, it is suitable for on-camera use as well as monitoring by directors and focus pullers.Waveform, histogram, RGB parade, vectorscope and focus peaking support precise image assessment. Atomos, ARRI and EL Zone false colour tools help evaluate exposure. The MultiScope view displays the camera image alongside several scopes simultaneously. Frame guides and anamorphic desqueeze support a range of shooting and delivery formats.For Log and HDR workflows, Shinobi 7 II provides HLG and PQ monitoring alongside custom 3D LUT previews. LUTs in .cube format can be loaded from an SD card. Display calibration can also be performed directly on the monitor using a compatible calibration probe, available separately.USB-C control allows settings such as white balance, aperture, shutter speed and ISO to be adjusted on supported cameras. Touch-to-focus enables focus point selection directly on the monitor. Available functions depend on the camera model and its firmware.One HDMI input and one HDMI output provide image monitoring and signal loop-through. The product-specific documentation lists support for UHD up to 30p and Full HD up to 60p. Power is supplied by an NP-F battery, USB-C PD or an optional DC battery eliminator. Shinobi 7 II is a monitor; recording takes place in the connected camera. Features7-inch Full HD touchscreen with 2,800 nits of calibrated peak brightnessHDMI input and output for image monitoring and signal loop-throughUSB-C camera control and touch-to-focus with compatible camerasMultiScope view displaying the image and multiple scopes simultaneouslyWaveform, histogram, RGB parade, vectorscope and focus peakingAtomos, ARRI and EL Zone false colour for exposure assessmentHLG and PQ monitoring with custom 3D LUT supportFrame guides and anamorphic desqueezePassive cooling and a weight of 401 g without a battery Powered by an NP-F battery, USB-C PD or an optional DC battery eliminator

ATOMOS Shogun AV-19MSKU: ATOMSHGAVM The Atomos Shogun AV-19M combines a 19-inch 4K UHD touchscreen with NDI HX3, 12G-SDI and HDMI connectivity. With 1,200 nits of brightness and 99% DCI-P3 colour gamut coverage, it gives production teams a detailed view for assessing focus, exposure and composition. Its seven-rack-unit chassis fits a standard 19-inch rack, making it suitable for control rooms, outside broadcast vehicles and mobile production systems.The monitor receives NDI HX3 signals over Gigabit Ethernet. A single source can be displayed full-screen, while quad-view allows up to four NDI sources to be monitored simultaneously. SDI and HDMI sources are displayed individually in full-screen view. Quad-view is available exclusively for NDI sources.Waveform, RGB parade, vectorscope, focus peaking, and Atomos, ARRI and EL Zone false colour tools support technical image assessment. Custom 3D LUTs in .cube format provide a look preview for Log signals. Six assignable function buttons offer direct access to frequently used tools.HDMI and 12G-SDI inputs and outputs simplify integration into existing video systems. Two analogue XLR audio outputs enable external audio monitoring. Dual 4-pin XLR power inputs and Atomos Continuous Power support uninterrupted switching between connected power sources. A dedicated flypack is available separately.

Bolin R9 NDI Indoor PTZ Camera Expanding Bolin’s PTZ lineup, the R9-L420N is designed for productions that demand high image quality and precise system synchronization.At its core is a 1-inch sensor paired with advanced image processing, delivering 4K60 video with up to 20X zoom and 1080p up to 120 fps for productions that require high frame rate capture. Hybrid autofocus combines phase-detection speed with contrast-based precision, helping the camera quickly acquire and maintain focus during live production.The camera also supports adjustable cropped outputs, allowing alternate framing to be generated from the same camera image. This gives operators additional production flexibility without requiring a second camera position.For multi-camera productions, BOLIN R9-L420N supports LTC timecode and Genlock, helping ensure accurate synchronization with other cameras and production systems. Built-in ND filters allow operators to fine-tune exposure in changing lighting conditions.Connectivity includes dual 12G-SDI, HDMI 2.0, Optical SDI, and IP outputs, with support for NDI High Bandwidth, NDI HX3, SRT, RTMP, RTSP, ONVIF, and MPEG-TS, allowing the camera to integrate into both traditional broadcast infrastructures and modern IP-based production workflows.Features4K60/1080p120, 1" Sony Sensor, 20x ZoomHybrid autofocus combines PDAF and CDAF for fast and reliable focusSupports adjustable cropping that allows alternate framing to be generated from the same camera image while the main output remains unchangedDirect USB-C recording to external storage to capture footage locallyIntegrated LED display provides a quick way to check status and settings

BOLIN Range All Weather 4K60 PTZR CameraSKU: RANGE Range is designed as the first PTZR camera built to function as an anywhere camera, allowing production teams to use the same camera across both indoor and outdoor environments. While most outdoor cameras sacrifice the size and usability expected from indoor production systems, Range maintains the form factor and visual presence of a professional indoor PTZ while adding the durability required for outdoor operation.With 4K60 video and 25X zoom powered by a 1/1.8-inch Sony sensor, Range is suited for applications ranging from studios and performing arts venues to sports production and live events. Its IP65 rating, concealed rain wiper, and operating range from -40°C to +60°C allow the camera to operate reliably in changing weather conditions.BOLIN Range also introduces an industry-leading motion system, with high-precision brushless motors capable of PTZR movement up to 300° per second and acceleration from 0° – 120° per second in 200 milliseconds. The image module can rotate up to 270°, enabling vertical video, creative camera angles, and horizon correction.Additional features include an integrated screen for reviewing settings and live preview, a built-in carrying handle with threaded accessory mounting points, and support for both Ethernet and Wi-Fi connectivity. Connectivity includes 12G-SDI, HDMI 2.0, USB-C (UVC), and IP outputs, along with support for NDI, SRT, RTMP, RTSP, and ONVIF workflows.Features4K60, 25x Zoom, 1/1.8" SensorIP65-rating with a concealed rain wiper and an operating temperature range from -40°C to +60°CPrecise, brushless motors deliver quiet, smooth movement up to 300°/s270° image module rotation allows for roll adjustments and vertical videoGimbal-based stabilization eliminates vibrations for steady shotsAI-assisted autofocus and tracking keep framing consistentBuilt-in screen provides live view and quick access to image parametersIlluminated ports for easy cable connections in low-lightIntegrated handle with threaded points for rigging and transportTechnical dataAudioAudio Input: XLR balancedAudio Output: HDMI, SDI, USB-C (UVC), IP, MicroSD Card RecordingEnvironmentalIP Rating: IP65 Wiper: YesImagingEffective Pixels: 8.4 MPImage Sensor 1/1.8" CMOS (STARVIS)Image Stabilization: 3-axis mechanical gimbalMax Video Resolution: 3840x2160Min Illumination: 0.5 lux(F1.61, AGC ON)Wide Dynamic Range: YesIP StreamingAudio Codec: AAC-LC =NDI: NDI HX3Simultaneous Streams: 2Streaming Protocols: RTMP, RTSP, RTP Streaming (Unicast, Multicast), MPEG-TS over UDP, MPEG-TS over RTPTimecode: YesVideo Codec: H.264, H.265WiFi: Yes (WiFi-6)LensAperture: F/1.6-7.6Digital Zoom: 16xFocal Length: 7.1-171.95 mmHorizontal Field of View: 59.2° to 2.5°Optical Zoom: 25xPhysicalBuilt-in Display: Yes (2" AMOLED)Dimensions: 168 × 226 × 256 mmMounting: Ceiling mount, Wall mount, TripodWeight: 5.15 kgPowerPower Consumption: 78 WPower Input: 12V DC~36V, PoE++Power Output: Yes (12V, 2A)PTZ ControlControl Interfaces: RS-422, IP, IR RemoteControl Protocols: VISCA Over IP, ONVIF, NDI, VISCA, PELCO P/DTally Light: YesPTZ MovementMax Pan/Tilt Speed: 300°/sPan Range: 340° (-170° to +170°)Preset Positions: 255Roll Range: 270° (-90° to +180°)Tilt Range: 210° (-30° to +180°)Tour/Cruise: Yes (12)Video OutputHDMI: HDMI 2.0Local Recording: Yes (MicroSD)SDI: 12G-SDIUSB: USB 3.0

Camgear Terra III PedestalSKU: CMG-TERRA-III Camgear Terra III Pedestal delivers optimal support for Studio and OB. Payload up to 80 kg. Features2-stage with payload up to 80 kgSmooth and precise on-air movement with on shot stroke length of 73.5 cmCapable of doing the shot at close range with seated or standing eyeline positionEasily and securely build up (or down) your camera package with the build/transport lockCrab and steer modes for tight spaces or on shot direction changesAdjustable cable guardHeavy-duty speedlock adaptor for easy and quick setup of the fluid head Technical dataPayload: 80 kgSteering Ring Diameter: 62.5 cWheel Diameter: 12.5 cmWeight: 67.5 kgStages: 2Perfect Balance Stages: 2On Shot Stroke: 73.5 cmSteering: Crab & SteerHeight: 68.5 - 142 cmTracking Width: 79 cm

DZOFILM Arles Zoom 25-75mm and 65-180mm T2.6 Two-Lens KitThe DZOFILM Arles Zoom Two-Lens Kit combines the Arles Zoom 25-75mm T2.6 and Arles Zoom 65-180mm T2.6 into a complete full-frame zoom system. Together, the two lenses cover a focal range from 25 to 180mm while maintaining a constant maximum T2.6 aperture. FearuresArles Zoom 25-75mm T2.6 and 65-180mm T2.6 in one setContinuous 25-180mm focal range coverage65-75mm overlap for flexible lens changesConstant T2.6 aperture on both lenses43.2mm image circle for full-frame sensorsParfocal designControlled focus breathing16 aperture blades on both lensesUnified 95mm front diameterUnified M86 filter threadStandard 0.8 MOD gearing270° focus rotation on both lensesDesigned to match the DZOFILM Arles Prime seriesLess than 1.8kg per lensMetric focus markingsProfessional dual-lens hard case included Technical dataLenses: Arles Zoom 25-75mm T2.6 + Arles Zoom 65-180mm T2.6Total Focal Range: 25-180mmOverlap Range: 65-75mmMaximum Aperture: Constant T2.6Sensor Coverage: Full FrameMaximum Image Circle: 43.2mmMinimum Focusing Distance 25-75mm: 0.51mMinimum Focusing Distance 65-180mm: 0.89mFocus Rotation: 270°Zoom Rotation: 100°Aperture Blades: 16Front Diameter: 95mmFilter Thread: M86Gear Module: 0.8 MODWeight: 25-75mm 1,767gWeight: 65-180mm 1,782gMount: PL installed as standard, optional interchangeable EF mountFocus Scale: Metric In the boxDZOFILM Arles Zoom 25-75mm T2.6 – MetricDZOFILM Arles Zoom 65-180mm T2.6 – MetricFront and rear capsPre-installed lens support feetShim boxTool kit including screwdriver and screwsProfessional dual-lens hard case with foam insert

DZOFILM Arles Zoom 25-75mm T2.6 Full-Frame Cine Zoom The DZOFILM Arles Zoom 25-75mm T2.6 covers a highly versatile focal range from wide angle to short telephoto. Designed for full-frame cinema cameras with a 43.2mm image circle, the lens maintains a constant T2.6 aperture throughout its entire 3x zoom range.Its optical design consists of 22 elements in 8 groups, including 7 ED and 5 HRI elements, and is engineered for high and consistent resolving power. Controlled focus breathing, natural bokeh and consistent optical rendering support professional use in narrative productions, commercials, documentaries and other cinema applications. With a minimum focusing distance of 0.51m, the 25-75mm provides additional flexibility for close-up shots and confined shooting environments.Its parfocal design maintains focus while zooming, while the constant T2.6 aperture keeps exposure consistent throughout the zoom range. The professional cine mechanics are designed for efficient on-set workflows. A standardized 95mm front diameter, M86 filter thread and 0.8 MOD gearing simplify integration with matte boxes, follow-focus systems and lens motors.The 270° focus rotation provides precise and repeatable focus control. The Arles Zoom is also designed to integrate consistently with the DZOFILM Arles Prime series. Front diameter, filter thread and operating interface follow the same system, while color rendering, bokeh and flare characteristics provide visual continuity across the Arles family.Features25-75mm full-frame cine zoomConstant T2.6 aperture throughout the zoom range43.2mm image circle for full-frame sensors3x zoom ratioParfocal design0.51m minimum focusing distance22 optical elements in 8 groups7 ED and 5 HRI elementsControlled focus breathing16 aperture blades for natural bokeh270° focus rotation100° zoom rotationStandard 0.8 MOD gearing95mm front diameterM86 filter threadDesigned to match the DZOFILM Arles Prime seriesWeight: 1,767gMetric focus markings

DZOFILM Arles Zoom 65-180mm T2.6 Full-Frame Cine ZoomThe DZOFILM Arles Zoom 65-180mm T2.6 extends the Arles Zoom system into the telephoto range with a versatile focal range from 65 to 180mm. Its 43.2mm image circle covers full-frame sensors, while the constant maximum T2.6 aperture is maintained throughout the entire 2.8x zoom range.The optical design consists of 20 elements in 8 groups. Seven ED and five HRI elements support high resolving power and controlled correction of optical aberrations. The tests presented by DZOFILM demonstrate consistent detail reproduction across the tested focal lengths.The parfocal design maintains focus while zooming. Focus breathing is also controlled and is shown as near zero at 120mm and 180mm in DZOFILM's supplied tests. Sixteen aperture blades support smooth, natural bokeh with largely circular highlights in the center of the frame. For professional on-set workflows, the 65-180mm uses the same operating concept as the 25-75mm.Its 95mm front diameter, M86 filter thread, standard 0.8 MOD gearing and 270° focus rotation enable a consistent setup with matte boxes, follow-focus systems and lens motors. At 1,782g, the telephoto zoom remains compact and portable. It also follows the optical and mechanical characteristics of the Arles Prime series, making it easier to combine zoom and prime lenses within the same production. Features65-180mm full-frame cine zoomConstant T2.6 aperture throughout the zoom range43.2mm image circle for full-frame sensors2.8x zoom ratio =Parfocal design0.89m minimum focusing distance20 optical elements in 8 groups7 ED and 5 HRI elementsControlled focus breathing16 aperture blades for natural bokeh270° focus rotation100° zoom rotationStandard 0.8 MOD gearing95mm front diameterM86 filter threadDesigned to match the DZOFILM Arles Prime seriesWeight: 1,782gMetric focus markings

Godox SL200RF Full-Color LED LightPaletteLab color technology provides full-spectrum performance across the entire visible wavelength range. It is much more than just a simple combination of light sources; it is a comprehensive spectral solution that enables precise color control at the nanometer level - for light that appears exactly as you imagine.Thanks to the continuous full spectrum output, the SL200 RF reproduces colors and textures particularly realistically. The light is very close to natural daylight and what the human eye sees on set. With high SSI values of 87, the lamp captures more detailed color information and offers productions an optimal starting point for color grading.With a wide CCT range from 1800K to 10000K, the GODOX SL200 RF covers everything from the warm amber glow of tungsten light to clear, cool whites. The color reproduction remains precise across the entire range, so the image remains true to the creative vision on set.With 92% coverage of the Rec.2020 color space, the SL200 RF delivers colored light with controlled saturation and precise color tone reproduction. With HSL adjustment, colors blend smoothly into one another, without annoying gradations or banding effects. FeaturesGeneralFor Film, Broadcast & Video ProductionOutput: 72,900 Lux at 1m w/ ReflectorOnboard, DMX & App Control; NFC FunctionCRI 98 | TLCI 9914 Lighting EffectsFan CooledBowens MountDisplay: YesEnvironmental Resistance: NoOperating Conditions: -20 to 40°CLight FixtureItem Type: 1x LED MonolightIncluded Light Modifier: 1x ReflectorIncluded Storage Case: NoColor Temperature: 1800 to 10,000KColor Modes: RGB, Daylight, TungstenColor Accuracy Standard: CRI 98, TLCI 99Dimming: App-Controlled / Built-In Dimmer / DMX / RDM • 0 to 100%Cooling System: FanBuilt-In Flash: NoPreprogrammed Effects: YesUmbrella Mount: NoFront Accessory Mount: Bowens SPhotometrics3200K582 fc / 6260 Lux at 3.3' / 1 m (Unmodified)150 fc / 1610 Lux at 6.6' / 2 m (Unmodified)68 fc / 730 Lux at 9.8' / 3 m (Unmodified)5600K694 fc / 7470 Lux at 3.3' / 1 m (Unmodified)179 fc / 1930 Lux at 6.6' / 2 m (Unmodified)81 fc / 876 Lux at 9.8' / 3 m (Unmodified)3200K5695 fc / 61,300 Lux at 3.3' / 1 m (with Reflector)1180 fc / 12,700 Lux at 6.6' / 2 m (with Reflector)472 fc / 5080 Lux at 9.8' / 3 m (with Reflector)5600K6772 fc / 72,900 Lux at 3.3' / 1 m (with Reflector)1412 fc / 15,200 Lux at 6.6' / 2 m (with Reflector)563 fc / 6060 Lux at 9.8' / 3 m (with Reflector)ConnectivityWireless Remote Control Type: Bluetooth, CRMX *Adapter Required (Not Included)Mobile App Compatible: Yes: Android & iOSApp Name: Godox LightFunctionality: Adjust Settings and Remote ControlWireless Range: 30 m (Bluetooth)Power & I/OPower Source: AC Power (Cable Included)Inputs/Outputs1x IEC Male Power Input (100 to 240 VAC, 50 / 60 Hz)1x XLR 5-Pin Male DMX Input1x XLR 5-Pin Female DMX Output1x USB-A Female Power/Firmware Input/Output (5 VDC at 1.5 A) Input Power: 100 to 240 VAC, 50 / 60 HzIncluded Adapter / Cable: 1x USA Type-A/B Plug to IEC Female CableInline Switch: NoPower Pass-Thru: NoPower Consumption: 230 W (Maximum)MountingYoke Type: Manually-Operated YokeFixture Mounting: 1 x 5/8" ReceiverIncluded in Delivery1 x Godox SL200 RF PaletteLab RGB LED Light1 x Reflector1 x AC Power Cord

Godox SL300RF Full-Color LED LightWith a wide CCT range of 1800 K to 10,000 K, the GODOX SL300 RF covers everything from the warm amber glow of tungsten light to crisp, cool whites. Color rendering remains precise across the entire range, ensuring the image stays true to the creative vision on set.Covering 92% of the Rec.2020 color space, the SL300 RF delivers colored light with controlled saturation and precise hue reproduction. During HSL adjustments, colors transition smoothly without distracting stepping or banding effects.The SL300RF supports Bluetooth remote control via the Godox Light App, while NFC pairing enables faster setup and control of multiple fixtures. An integrated DMX module ensures seamless connection to professional lighting consoles, and the TimoLink TRX transceiver allows for wireless CRMX control, offering greater workflow flexibility on set.PaletteLab color technology redefines light quality, faithfully reproducing the texture, depth, and nuances of natural light. From vibrant colors to precise skin tone rendering, the system excels in a wide range of shooting scenarios. Thanks to an intelligent, temperature-controlled fan system, the light operates quietly even at full power; fan noise remains low, minimizing disruption to on-set audio recording - ensuring cleaner audio and video production.Equipped with a Bowens mount, the SL300 RF integrates seamlessly with a wide range of professional light modifiers. Whether you need a focused beam or soft ambient light, a single fixture covers a broad spectrum of creative lighting requirements.Key FeaturesGeneralFor Film, Broadcast & Video ProductionOutput: 88,800 Lux at 1m w/ ReflectorOnboard, DMX & App Control; NFC FunctionCRI 98 | TLCI 9914 Lighting EffectsFan CooledBowens MountDisplay: YesEnvironmental Resistance: NoOperating Conditions: -20 to 40°CLight FixtureItem Type: 1x LED MonolightIncluded Light Modifier: 1x ReflectorIncluded Storage Case: NoColor Temperature: 1800 to 10,000KColor Modes: RGB, Daylight, TungstenColor Accuracy Standard: CRI 98, TLCI 99Dimming: App-Controlled / Built-In Dimmer / DMX / RDM • 0 to 100%Cooling System: FanBuilt-In Flash: NoPreprogrammed Effects: YesUmbrella Mount: NoFront Accessory Mount: Bowens SPhotometrics3200K582 fc / 6260 Lux at 3.3' / 1 m (Unmodified)150 fc / 1610 Lux at 6.6' / 2 m (Unmodified)68 fc / 730 Lux at 9.8' / 3 m (Unmodified)5600K694 fc / 7470 Lux at 3.3' / 1 m (Unmodified)179 fc / 1930 Lux at 6.6' / 2 m (Unmodified)81 fc / 876 Lux at 9.8' / 3 m (Unmodified)3200K5695 fc / 61,300 Lux at 3.3' / 1 m (with Reflector)1180 fc / 12,700 Lux at 6.6' / 2 m (with Reflector)472 fc / 5080 Lux at 9.8' / 3 m (with Reflector)5600K6772 fc / 72,900 Lux at 3.3' / 1 m (with Reflector)1412 fc / 15,200 Lux at 6.6' / 2 m (with Reflector)563 fc / 6060 Lux at 9.8' / 3 m (with Reflector)ConnectivityWireless Remote Control Type: Bluetooth, CRMX *Adapter Required (Not Included)Mobile App Compatible: Yes: Android & iOSApp Name: Godox LightFunctionality: Adjust Settings and Remote ControlWireless Range: 30 m (Bluetooth)Power & I/OPower Source: AC Power (Cable Included) Inputs/Outputs1x IEC Male Power Input (100 to 240 VAC, 50 / 60 Hz)1x XLR 5-Pin Male DMX Input1x XLR 5-Pin Female DMX Output1x USB-A Female Power/Firmware Input/Output (5 VDC at 1.5 A)Input Power: 100 to 240 VAC, 50 / 60 HzIncluded Adapter / Cable: 1x USA Type-A/B Plug to IEC Female CableInline Switch: NoPower Pass-Thru: NoPower Consumption: 230 W (Maximum)MountingYoke Type: Manually-Operated YokeFixture Mounting: 1 x 5/8" ReceiverIncluded in Delivery1 x Godox SL300 RF PaletteLab RGB LED Light1 x Reflector1 x AC Power Cord