AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-FiDO-4 4-Channel openGear SDI/LC Fiber Converters The OG-FiDO-4 family delivers high-density, four-channel SDI and fiber conversion for broadcast, production, sports, live events, house of worship, campus installations, and Pro AV infrastructure. Designed for applications where growing camera counts and long SDI runs demand greater fiber density, OG-FiDO-4 supports up to 40 independent SDI/fiber channels in a single openGear frame.Built around a common four-channel architecture, the OG-FiDO-4 family offers nine configurations for 12G-SDI single mode, 3G-SDI single mode, and 3G-SDI multi-mode LC fiber. Choose from four-channel transmit, four-channel receive, or two-channel transmit/two-channel receive models to match the signal direction and fiber requirements of each installation.All four SDI BNC connections are independent and fully isolated, allowing different supported SDI data rates to be carried simultaneously. Automatic data rate detection and reclocking help maintain signal integrity, while SDI ancillary data, including HDR metadata, passes transparently through the signal path. Remote monitoring via openGear DashBoard software provides centralized operational visibility, complemented by onboard Input Present and SMPTE Lock LEDs for fast local status verification. FeaturesFour independent, fully isolated SDI channelsUp to 40 SDI/fiber channels in a single openGear frameNine configurations from a common, four-channel architecture12G-SDI and 3G-SDI model optionsSingle mode and multi-mode LC fiber configurationsFour-channel transmit, four-channel receive, and 2 Tx / 2 Rx configurationsDifferent supported SDI data rates can be carried simultaneouslyAutomatic SDI data rate detection and reclockingSupport for HDR (High Dynamic Range) videoPass-through of SDI ancillary dataSupports ASI signal transport over fiberRemote monitoring via openGear DashBoard softwareInput Present and Input SMPTE Lock LEDsCompatible with current AJA FIBERLC TX and RX SFP modulesHot-swappableRear I/O card includedTwo openGear frame slots required per card8.0 Watts maximum power consumptionFive-year warranty Configurations 12G Single Mode ConfigurationsHigh-density four-channel 12G-SDI transport over single mode LC fiberOG-FiDO-4T-12G - 4-Channel 12G-SDI to Single Mode LC Fiber Transmitter - provides four independent 12G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-12G SFP modulesOG-FiDO-4R-12G - 4-Channel Single Mode LC Fiber to 12G-SDI Receiver - provides four independent fiber-to-12G-SDI receive paths using two AJA FIBERLC-2RX-12G SFP modulesOG-FiDO-4X-12G - 4-Channel 12G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 12G-SDI-to-fiber transmit paths and two fiber-to-12G-SDI receive paths on a single card for simultaneous bidirectional conversion using one FIBERLC-2TX-12G and one FIBERLC-2RX-12G.3G Single Mode ConfigurationsFour-channel 3G-SDI transport over single mode LC fiberOG-FiDO-4T - 4-Channel 3G-SDI to Single Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2-TX SFP modulesOG-FiDO-4R - 4-Channel Single Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2-RX SFP modulesOG-FiDO-4X - 4-Channel 3G-SDI / Single Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion using one FIBERLC-2-TX, and one FIBERLC-2-RX. 3G Multi-Mode ConfigurationsFour-channel 3G-SDI transport for installations using multi-mode LC fiberOG-FiDO-4T-MM - 4-Channel 3G-SDI to Multi-Mode LC Fiber Transmitter - provides four independent 3G-SDI-to-fiber transmit paths using two AJA FIBERLC-2TX-MM SFP modulesOG-FiDO-4R-MM - 4-Channel Multi-Mode LC Fiber to 3G-SDI Receiver - provides four independent fiber-to-3G-SDI receive paths using two AJA FIBERLC-2RX-MM SFP modulesOG-FiDO-4X-MM - 4-Channel 3G-SDI / Multi-Mode LC Fiber, 2 Tx / 2 Rx - combines two 3G-SDI-to-fiber transmit paths and two fiber-to-3G-SDI receive paths for simultaneous bidirectional conversion over multi-mode LC fiber using one FIBERLC-2TX-MM and one FIBERLC-2RX-MM

AJA OG-GEN10The OG-GEN10 is a cost effective and flexible SD/HD/AES-11 sync generator. The AJA OG-GEN10 features 10 total outputs comprised of 2 groups of independently controlled SD/HD sync outputs and 1 AES-11 output. The SD outputs can be switched between Color Black or Color Bars. HD tri level sync can be switched between 19 different HD formats including all that are in use today. The AES-11 output can be switched between Silence and Tone. All outputs are in sync with each other and are sourced from an accurate master time baseFeaturesHD Tri-level sync generationSD Color Black or Color Bars9x synchronized reference outputs: Group 1 (1-4) / Group 2 (5-9)Two groups of independently switchable outputs allow simultaneous HD and SD sync generationAES-11 output switchable between silence and toneMultiple outputs can synchronize entire systems without requiring a Sync DAExternal dip switch configurationRemote control via the Ross DashBoard softwareOptional Redundant power via the openGear frameHot swappableCompatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear framesPower: 6.75 watts max per cardFive-year warranty

BirdDog OG4BirdDog OG4 is the world's first NDI OpenGear card. It offers four independently configurable 12G-SDI ports. Full dashboard support is included as well as an SFP+ port for 10GbE connectivity. It is fully compatible with the fourth generation of the openGear platform, oGx, a modular 2RU rack frame system with an open architecture. BirdDog OG4 provides full support for Dashboard, the freely available OpenGear control software for MacOS, Windows, and Linux. The SFP+ port (industry standard) enables short, medium, and long-range fiber connections and supports Ethernet protocols from 1GbE to 10GbE. The device supports all video formats up to 4Kp60 (including all HD formats). In encoding mode, up to four channels of 4Kp60 can be processed simultaneously, while in decoding mode, a maximum of two channels of 4Kp60 or four channels of 4Kp30 or 1080p60 can be processed simultaneously. Each channel offers independent control of frame rates and resolution. The openGear frames are equipped with integrated fans for optimal cooling of all cards. They can be equipped with two redundant power supplies, enabling very high reliability and long operating times.FeaturesNDI OpenGear card for modular 2RU OpenGear Rack System4x 12G-SDI inputs and outputsFull compression for NDI i-frameDashboard Support: Software for MacOS, Windows, Linux (free/separately available)SFP+ according to industry standard for fiber connectionsEthernet protocols from 1 GbE to 10 GbEEncoding & Decoding support up to 4K60 resolutionFrame rate and resolution of inputs/outputs independently configurableCompatible with 2RU and OG-3-FR openGear framesTechnical dataVideo I/O: 4x 12G SDI Encode Support, 2x 12G-SDI or 4x 1.5/3/6G SDI Decode SupportAudio Input: 2 Channels per SDI portAudio Output: 2 Channels per SDI portVideo Codec: NDI (Full Bandwidth i-Frame Compression), max. 4 Channel UHD 60pFull NDIOpenGear Network Port (integrated in chassis backplane), 1x 1GbpsSFP+ Network Port1x 10Gbps optional module, fiber or copper 10 GbEControl: WebUI on device; Published RESTful API; Q-Sys plugin; Crestron; Zoom; openGear Dashboard Control SystemHealth Monitoring: WebUI on device Dimensions: approx. 33.5 x 7.5 x 2.4 cm (processor card only)Video Formats3840x2160p @ 23.98; 24; 25; 29.97; 30; 50; 59.94; 601920x1080p @ 23.98; 24; 25; 29.97; 30; 50; 59.94; 601920x1080i @ 50; 59.94; 601280x720p @ 50; 59.94; 60