Benro 100 x 100mm Master Series Neutral Density 1.8 Filter (6 Stops)
SKU: MAND641010
Benro Master 100 x 100mm Glass ND Filter (6-Stop) is a Solid Neutral Density filter, designed to allow for longer exposures in any conditions, but particularly in bright light. Colours become more saturated and details become richer.
Running water (waterfalls, ocean tides) becomes smooth and misty as light information is written over and over during the exposure time. Clouds will soften and other moving objects will create blur while static objects remain pin sharp.
Features
Imported German Schott optical glassHigh definition technology ensures perfect clarity with zero loss of qualityULCA (ultra low chromatic aberration) coating creates reflectivity below 1.5%Anti-IR and ultra-low colour shift allowing light to transmit evenlyImproved graduated area for better performance and light capture in cameraLeading WMC (Waterproof Multi-layered Coating) protects filter from scratches, liquids and oils
Benro 100 x 150mm Master Series Soft Edge Graduated 0.6 ND Filter
SKU: MAGND4S1015
Benro Master 100 x 150mm Glass (Soft) GND (2-Stop) is a Soft Grad GND filter, which is used to balance the light ratios between upper and lower sky and foregrounds without the sharp separation offered by Hard Grad filters.
The Benro Master 100 x 150mm Glass filter will darken the brightest portion of the sky and delicately balance it with the rest of the image.
It also allows for longer exposure times to bring out detail of dark areas in the foreground.
Adopting the most advanced, ultra smooth WMC technology on the surface of each Master Filter protects them from almost everything nature can throw at them, with no effect on the images captured. The Hydro-phobic qualities keep the surface free of dust, oils and liquids and make the filters scratch resistant.Features
Imported German Schott optical glassHigh definition technology ensures perfect clarity with zero loss of qualityULCA (ultra low chromatic aberration) coating creates reflectivity below 1.5%Anti-IR and ultra-low colour shift allowing light to transmit evenlyImproved graduated area for better performance and light capture in cameraLeading WMC (Waterproof Multi-layered Coating) protects filter from scratches, liquids and oils
Benro 100 x 150mm Master Series Hard Edge Graduated 0.6 ND Filter
SKU: MAGND4H1015
Benro Master 100 x 150mm Glass (Hard) GND (2-Stop) is a Hard Grad GND filter, used when there is a clear (flat) horizon line separation between sky and foreground, and when there is also an obvious exposure difference between the two. The Hard Grad GND filter’s primary role is to balance the exposure difference between sky and foreground.
German Schott optical Glass
Imported German Schott optical glass
High definition technology ensures perfect clarity with zero loss of quality
German Schott Optical Glass has been selected due to its superior optical performance, high light transmission and stable optical properties.
ULCA (ultra low chromatic aberration) coating creates reflectivity below 1.5%
HD filters offer High Definition retention of image quality captured in camera. They do not improve the resolution capabilities of the lens or camera used.
Anti-IR and ultra-low colour shift allowing light to transmit evenly Low Reflectivity – In order to reduce reflections on the surface of our filters, and to prevent glare occurring between the lens and filter, Master Filters are given a special reflection absorption coating. This reduces the reflection properties of our filters to less than 1.5%
Improved graduated area for better performance and light capture in camera
In order to reduce the red colour shift caused by infra-red light pollution, Benro Master Filters are coated with an anti reflection treatment, cancelling out infra-red light waves before they can enter the camera sensor. Our advanced coating technology neutralize both IR and UV light waves for minimal colour shift. WMC – Waterproof, Multi-layered Coating (with anti-scratch protection)
Adopting the most advanced, ultra smooth WMC technology on the surface of each Master Filter protects them from almost everything nature can throw at them, with no effect on the images captured. The Hydro-phobic qualities keep the surface free of dust, oils and liquids and make the filters scratch resistant.
Benro Master 100 x 150mm Glass (Hard) GND (3-Stop)
SKU: MAGND8H1015
Benro Master 100 x 150mm Glass (Hard) GND (3-Stop) is a Hard Grad GND filter, used when there is a clear (flat) horizon line separation between sky and foreground, and when there is also an obvious exposure difference between the two.
The Hard Grad GND filter’s primary role is to balance the exposure difference between sky and foreground.
Features
German Schott Optical Glass has been selected due to its superior optical performance, high light transmission and stable optical properties.
HD filters offer High Definition retention of image quality captured in camera. They do not improve the resolution capabilities of the lens or camera used.
Low Reflectivity – In order to reduce reflections on the surface of our filters, and to prevent glare occurring between the lens and filter, Master Filters are given a special reflection absorption coating. This reduces the reflection properties of our filters to less than 1.5%
In order to reduce the red colour shift caused by infra-red light pollution, Benro Master Filters are coated with an anti reflection treatment, cancelling out infra-red light waves before they can enter the camera sensor. Our advanced coating technology neutralize both IR and UV light waves for minimal colour shift.
WMC – Waterproof, Multi-layered Coating (with anti-scratch protection)
Adopting the most advanced, ultra smooth WMC technology on the surface of each Master Filter protects them from almost everything nature can throw at them, with no effect on the images captured. The Hydro-phobic qualities keep the surface free of dust, oils and liquids and make the filters scratch resistant.
Benro 82mm Circular Polarizer Filter
SKU: SHDCPL82
Benro 82mm Circular Polarizer Filter is a CPL, designed specifically for the patented FH100M2 series Filter Holder System. Features:
German Schott Optical GlassSuper High Definition TechnologyWaterproof Multi-layered (nano) CoatingUltra-Low Chromatic AberrationL39 Coating TechnologyToughened Glass
German Schott Optical Glass
Imported from Germany, Schott Optical Glass is recognized as a premium optical glass among manufacturers. Offering superior light transmission and structural integrity with minimal (if any) color variance. A precise flat, parallel surface is easier to reach with optical glass, than it is with resin, which is vital for shooting top quality landscapes.
The surface hardness and overall rigidity of the optical glass is superior to the optical resin. The glass is wear resistant and difficult to deform. The heat stability of the optical glass is much better than optical resin. It can be coated under high temperatures of up to 300 degrees, for more precise and uniform coverage, leading to a higher quality finish.
Super High Definition Technology
SHD – Super High Definition optical technology. Precisely ground optical glass ensures that surfaces are parallel, allowing the light entering the lens through the filter to do so in a straight line, maximizing image and light quality.
Waterproof Multi-layered (nano) Coating
WMC – Waterproof Multi-layered Coating is applied to filter surfaces to create an ultra-smooth, anti-scratch finish. The clear coating will repel dirt and liquids and will also allow for quick easy cleaning of the filter surface.
Ultra-Low Chromatic Aberration
BENRO Ultra Low Chromatic Aberration coating, designed by German optical coating experts. Designed for minimal color shift and very low reflection rate, which means it will minimize the influence of the filter on the final image. It also ensures exceptional transmittance of light entering the lens.
L39 Coating Technology
L39 Coating Technology absorbs 99% of UV rays (below 390nm) and minimizes haze. Toughened Glass protects the front element of your camera from damage. Our hardened glass filters are put through rigorous ball-bearing drop tests to ensure protection against direct impacts without affecting visual properties of the glass after impact. A 20mm (diameter) steel ball-bearing is dropped directly onto the filter multiple times from more than 1.2 metres.
Benro 95mm Circular Polarizer
SKU: SHDCPL95
Benro 95mm Circular Polarizer Filter is a CPL, designed specifically for the patented FH100M2 series Filter Holder System. Features:
German Schott Optical GlassSuper High Definition TechnologyWaterproof Multi-layered (nano) CoatingUltra-Low Chromatic AberrationL39 Coating TechnologyToughened Glass
German Schott Optical Glass
Imported from Germany, Schott Optical Glass is recognized as a premium optical glass among manufacturers. Offering superior light transmission and structural integrity with minimal (if any) color variance. A precise flat, parallel surface is easier to reach with optical glass, than it is with resin, which is vital for shooting top quality landscapes.
The surface hardness and overall rigidity of the optical glass is superior to the optical resin. The glass is wear resistant and difficult to deform. The heat stability of the optical glass is much better than optical resin. It can be coated under high temperatures of up to 300 degrees, for more precise and uniform coverage, leading to a higher quality finish.
Super High Definition Technology
SHD – Super High Definition optical technology. Precisely ground optical glass ensures that surfaces are parallel, allowing the light entering the lens through the filter to do so in a straight line, maximizing image and light quality.
Waterproof Multi-layered (nano) Coating
WMC – Waterproof Multi-layered Coating is applied to filter surfaces to create an ultra-smooth, anti-scratch finish. The clear coating will repel dirt and liquids and will also allow for quick easy cleaning of the filter surface.
Ultra-Low Chromatic Aberration
BENRO Ultra Low Chromatic Aberration coating, designed by German optical coating experts. Designed for minimal color shift and very low reflection rate, which means it will minimize the influence of the filter on the final image. It also ensures exceptional transmittance of light entering the lens.
L39 Coating Technology
L39 Coating Technology absorbs 99% of UV rays (below 390nm) and minimizes haze. Toughened Glass protects the front element of your camera from damage. Our hardened glass filters are put through rigorous ball-bearing drop tests to ensure protection against direct impacts without affecting visual properties of the glass after impact. A 20mm (diameter) steel ball-bearing is dropped directly onto the filter multiple times from more than 1.2 metres.
Benro 100 x 150mm Universal Series Soft-Edge Graduated Neutral Density 1.2 Filter (4-Stop)
SKU: UNGND16S1015
Benro Universal 100 x 150mm Resin (Soft) GND (4-Stop) is a Soft Grad GND filter used to balance the light ratios between upper and lower sky and foregrounds without the sharp separation offered by Hard Grad filters.
The Benro Universal 100 x 150mm Resin (Soft) GND filter will darken the brightest portion of the sky and delicately balance it with the rest of the image.
It also allows for longer exposure times to bring out detail of dark areas in the foreground.
Features
PMMA Optical ResinHigh definition optical technology with precision ground surfaces, ensures perfect clarity with zero loss of qualityAdvanced Dyeing technology for ultra-low colour shiftLeading WMC (Waterproof Multi-layered Coating) protects filter from scratches, liquids and oilsGraduation area fully optimized for superior performance against competitors
PMMA
Resin used in the Benro Universal square filter range is a hard-wearing shock-resistant material perfectly suited to heavy extended use. A cost-effective alternative to glass filters, perfect for photographers that are keen to advance their photographic skills. Resin filters are generally more susceptible to scratches and marks than glass filters, but can be dropped or bent without breaking.
High Definition optical technology
Precisely ground optical glass ensures that surfaces are parallel, allowing the light entering the lens through the filter to do so in a straight line, maximizing image and light quality.
ADT
Advanced dyeing technology reduces the issues of colour shift found with other resin filters. Benro Universal Series filters guarantee Low Colour Shift through digital calculation comparisons for improved neutrality of resin graduation coatings.
WMC
Waterproof Multi-layered Coating is applied to filter surfaces to create an ultra-smooth, hardened anti-scratch finish. The clear coating will repel dirt and liquids and will also allow for quick easy cleaning of the filter surface.
Precise Graduation
Benro Universal Series filters offer an optimized gradient region for ultimate control of light and dark. Graduation coating is extended to ensure best coverage balance is in the centre of the filter.
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Kit
SKU: FC4x5NDKit1
Formatt-Hitech 4mm Neutral Density (ND) filters are the essential filters for digital photography and cinematography. Formatt-Hitech ND filters reduce the amount of light entering the camera and allow the photographer to create the following effects
Ethereal waterfalls and streamsFlat water effect in oceans and lakesStreaky cloudsMotion blur in sportsLong exposures to remove people from public areasShallow depth of field using fast lenses wide-openAdjusting aperture for cinematography
Kit Sets
1-3 stops4-6 stops7-10 stops
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Kit
SKU: FC4x5NDKit1
Formatt-Hitech 4mm Neutral Density (ND) filters are the essential filters for digital photography and cinematography. Formatt-Hitech ND filters reduce the amount of light entering the camera and allow the photographer to create the following effects
Ethereal waterfalls and streamsFlat water effect in oceans and lakesStreaky cloudsMotion blur in sportsLong exposures to remove people from public areasShallow depth of field using fast lenses wide-openAdjusting aperture for cinematography
Kit Sets
1-3 stops4-6 stops7-10 stops
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Kit
SKU: FC4x5NDKit1
Formatt-Hitech 4mm Neutral Density (ND) filters are the essential filters for digital photography and cinematography. Formatt-Hitech ND filters reduce the amount of light entering the camera and allow the photographer to create the following effects
Ethereal waterfalls and streamsFlat water effect in oceans and lakesStreaky cloudsMotion blur in sportsLong exposures to remove people from public areasShallow depth of field using fast lenses wide-openAdjusting aperture for cinematography
Kit Sets
1-3 stops4-6 stops7-10 stops
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Formatt-Hitech 4x5.65" 4mm Firecrest ULTRA ND Neutral Density Filter
Formatt-Hitech 4mm Firecrest ND is a revolutionary new type of ND filter from Formatt-Hitech. Rather than dyed resin, Firecrest is a rare earth mineral coating used to create hyper neutral NDs. The filters are made from 4mm thick Schott Superwite glass, and the multicoating is bonded in the middle to increase scratch resistance. Firecrest Filters are neutral across all spectrums, including UV, visible, and infrared.
Firecrest ND is a quantum leap improvement over all previous generation ND and IRND products and represents the technological state of the art in scientific light modification. These glass filters are hyper-neutral across the visible light spectrum and also remove more IR contamination than any other filter - making them IRND filters.
Firecrest is a radical departure in how ND filters are manufactured. Previous generation NDs were made by dying resin. Firecrest is not a dying process, it is a rare earth metal coating process that is applied directly to the glass through an electrolytic process.
On rectangular filters, the Firecrest coating is sandwiched between the finest Schott Superwite optical glass, increasing scratch resistance and longevity. Firecrest reduces all spectrums of light (UV, visible, near infrared and infrared) almost perfectly evenly.
Densities Available
1 - 10 Stops
Kit Sets
1-3 stops | 4-6 stops | 7-10 stops.
4mm Filter Sizes
4x4" | 4x5.65" | 5x5" | 5.65x5.65" | 6.6x6.6mm
Genus 77mm Filter Step Up Ring Set
G-SUR/77KIT
Set consists of
52-77mm step up ring58-77mm step up ring62-77mm step up ring67-77mm step up ring72-77mm step up ring
Genus 82mm Filter Step Up Ring
Allows the use of 82mm filters and accessories on a lens with 52mm/ 58mm/ 62mm/ 67mm/ 72mm/ 77mm filter thread
G-SUR/52/82 52-82mm step up ringG-SUR/58/82 58-82mm step up ringG-SUR/62/82 62-82mm step up ringG-SUR/67/82 67-82mm step up ringG-SUR/72/82 72-82mm step up ringG-SUR/77/82 72-82mm step up ring
Genus 82mm Filter Step Up Ring
Allows the use of 82mm filters and accessories on a lens with 52mm/ 58mm/ 62mm/ 67mm/ 72mm/ 77mm filter thread
G-SUR/52/82 52-82mm step up ringG-SUR/58/82 58-82mm step up ringG-SUR/62/82 62-82mm step up ringG-SUR/67/82 67-82mm step up ringG-SUR/72/82 72-82mm step up ringG-SUR/77/82 72-82mm step up ring