RigWheels 100mm Ball Adapter SKU: ba100 Use this tripod head bowl adapters to mount a half-bowl style tripod head on a flat surface. RigWheels Ball Adapters are custom machined aluminum, anodized black and sized for use with Righweels RigPlate and other flat surfaces. Unlike some other bowl adapters, this 100mm bowl adapter has a true curved bowl interior giving you the most surface area contact with your tripod head. This RigWheels 100mm Ball Adapter can be used with our RigPlate as well as with any other flat mounting surface that you may want to mount your tripod head to.
RigWheels 100mm Ball Head Adapter Pro SKU: CBA100 Weight: 0.45 kgDimensions: 12.7 cm x 12.7 cm x 7.62 cm
RigWheels 75mm Ball Head Adapter Pro SKU: CBA75 Weight: 0.45 kgDimensions: 12.7 cm x 12.7 cm x 7.62 cm
RigWheels Car Strap & Safety Kit SKU: SK01 This is a great little kit for securing and stabilizing your camera when car mounting as well as other applications. The CineRopes are incredibly useful for all sorts of on-location purposes like securing silks, adding ballast to light-stands, tying down your gear cart etc.Car Strap & Safety Kit incudes 4 x Hood Hook4 x CineRope
RigWheels E-Cup 10″ Suction Cup SKU: EC10Sometimes you just need really big suction cups to do heavy lifting. The E-Cup 10″ suction cup comes with a set of 3″ stand offs and a RigPlate mounting platform attached.
RigWheels Mitchell Adapter Plate With this adapter plate you can use Mitchell tripod heads on any of our systems that use either the RigPlate or RigPlate Pro. There are many different varieties of tie-down knobs for Mitchell heads so compatibility with RigPlate or RigPlate Pro will vary depending on the specific head and tie-down method. For example, if the head uses a “castle nut” you would need to use the Mitchell Adapter Plate in conjunction with the RigPlate Pro so the castle nut goes through the plate or, use a standard RigPlate with 3″ or 6″ risers.
RigWheels PT-Zero Extended Wall Mounting BracketSKU: PT-Z-WB8The PT-Zero Extended Wall Mounting Bracket provides approximately 22,86 cm of clearance behind the camera for cabling or line-of-sight purposes. This bracket can also be used to mount the “upright” or camera-on-top isolator to a wall or pipe. (pipe clamps sold separately). The plate that attaches to the wall is flush mount and does not have any screws/bolts protruding.
RigWheels PT-Zero Pipe ClampsSKU: PT-Z-PC022 pieces of RigWheels universal pipe clamps. These connect via 3/8″ bolts going through the mounting plate.
RigWheels PT-Zero Wall Mounting BracketSKU: PT-Z-WB4The PT-Zero Wall Mounting Bracket provides approximately 12,7cm of clearance behind the camera for cabling/clearance purposes. The plate that attaches to the wall is flush mount and does not have any screws/bolts protruding. Our pipe clamps can be added when necessary.
RigWheels RigMount Magnetic Mount Short SKU: RMS1 The RigMount is a magnetic camera car mount that uses rare earth magnets to achieve its surprisingly high holding power. (up to 35lbs in a vertical pull) This version has a shorter mounting bolt on top sized specifically for use with cameras and small ball heads. It has a a specially formulated rubber coating to both protect the surface you mount to and also to prevent slippage. The great thing about mounting a camera with a RigMount magnetic camera car mount is that once it is safely attached to a steel surface it will never loose it’s holding power. This gives you peace of mind and better results as well. Many other mounting devices can sag or detach. When you mount with a RigMount camera car mount you can be confident that your frame will stay exactly where you want it. Suction mounts are prone to vibration because of the rubber components. Because this magnetic camera car mount uses a durable rubber material that is just thick enough to protect the surface you’re mounting to, your shots will be more stable and have less vibration than when using most common suction methods. Since the RigMount has a flat base it can also be used to place and position your camera as an ordinary mini-tripod. For point-and-shoot cameras the RigMount makes a great travel tripod because of it’s versatility and all of the different ways in which you can place it. One of the difficulties with most miniature tripods is that it can often be difficult to find a platform to put it on in order to get the camera to the correct height. The RigMount handles this frustration nicely with its ability to attach to steel surfaces ( street signs, cars, mail boxes, railings, etc….)
RigWheels Set of 8 Cloud Mount Cable Clamps SKU: CMC8 8 Additional Cloud Mount Cable Clamps allowing you to double the capacity or amount of cables used in the system. CMC8 Included 8 x Cloud Mount Vibration Isolator Cable Clamp18 x Socket Button Head – 1/4″ x .51 x 3/16″ Hex Key)1 x 5/32″ Hex Key