AdiCam 10″ Premium Wheel System SKU: 107 The adicam 10” Premium Wheel System features two fixed and two swivel wheels with built-in footbrakes that keep the cart perfectly stable and secure. The mountings are made from aluminium to make them lightweight, strong and durable. They are 15% lighter than our standard steel solutions, while maintaining the same load capacity. Optionally, the fixed wheels can be easily turned into swivel wheels by removing two locking screws, and if you prefer, it is possible to purchase an additional brakes separately, which allows all wheels to be braked. New version wheels fit all models of adicam carts. Each wheel comes with a wheel bag for protectionFits inside the folded adicam STANDARD / adicamSTANDARD+ and adicamMAX / adicam MAX+ cart only
AdiCam 150MM Ball Mount SET The solution allows you mounting a 150 mm head on the adicam cart. Set is made of aluminum which ensures high durability, stability and exceptional lightness. We recommend adapting it near the center of the trolley so that it does not overturn. The best solution for adapting/installing is presented on the attached photos – on the swivel wheels/narrow side of the trolley. Maximum lifting capacity – 30 kg2 x handles with 35mm tube, Horseshoe Mount and 150mm Ball Plate
AdiCam 9″ Premium Wheel SystemSKU: 106 The adicam 9” Premium Wheel System features two fixed and two swivel wheels with built-in footbrakes that keep the cart perfectly stable and secure. The mountings are made from aluminium to make them lightweight, strong and durable. They are 15% lighter than our standard steel solutions, while maintaining the same load capacity. Optionally, the fixed wheels can be easily turned into swivel wheels by removing two locking screws, and if you prefer, it is possible to purchase an additional brakes separately, which allows all wheels to be braked. New version wheels fit all models of adicam carts. Each wheel comes with a wheel bag for protection.Set includes1x 9″ Premium Wheel System Kit
AdiCam 9″ Wheel Kit Additional set of large 9 inch pneumatic wheels (225mm) to equip the adicam cart. AdiCam 9″ Wheel Kit includes:2x 225mm swivel wheel with brake2x 225 mm wheel
AdiCam Camera Mount System AdiCam Camera Mount System is made of aluminum which ensures high durability, stability and exceptional lightness. It is suitable for adapting multiple camera configurations using different plates. System allows any adjustment of the height and direction of the camera depending on customer preferences. In the case of heavy equipment, we recommend adapting it near the center of the trolley so that it does not overturn. The best solution for adapting/installing is presented on the attached photos – on the swivel wheels/narrow side of the trolley. Maximum lifting capacity – 30 kg2 x handles with 35mm tube and Horseshoe Mount
AdiCam Steadicam/Accessory mount AdiCam Steadicam/Accessory mount for adapting monitors, steadicam or tripods 35mm diameter. This set is made of aluminum which ensures high durability, stability and exceptional lightness. In case of heavy equipment, we recommend adapting it near the center of the trolley so that it does not overturn. The best solution for adapting/ installing is presented on the attached photos – on the swivel wheels/narrow side of the trolley. Using the steadicam, we recommend fixing on both legs. All AdiCam's accessories are compatible with each other, after removing the manfrotto adapter, you can mount other our productsMaximum lifting capacity – 30 kgSet includes 2 x handles with 35mm tube and manfrotto head R069,40
AdiCam Vesa Mount for 5/8″ baby pin with Landscape/Portrait Swing SKU: 045 Constructed from lightweight aluminum with anodized red 75mm/100mm VESA plate, designed to work with light stands, c-stands, or any other mounting device with a 16mm (5/8″) baby pin. Easy and instantaneous rotation from horizontal to vertical position using a quick release lever. The mount has 2 pivot points allowing to confidently adjust the angle of your monitor for ideal viewing. The additional 3/8” threaded hole on the top of the mount allows to screw some accessories. Supporting any size monitor not exceeding 18 kilos.
AdiCam Vesa Mount for 5/8″ baby pin SKU: 046 Constructed from lightweight aluminum with anodized red 75mm/100mm VESA plate, designed to work with light stands, c-stands, or any other mounting device with a 16mm (5/8″) baby pin. The mount has 2 pivot points allowing to confidently adjust the angle of your monitor for ideal viewing. The additional 3/8” threaded hole on the top of the mount allows to screw some accessories. Supporting any size monitor not exceeding 18 kilos.
CaseCart Combo Pole kitMeet the CaseCart Combo Pole, an indispensable accessory for attaching cameras, lights, monitors, and other items to the CaseCart. With its versatile design, it is perfect for professionals seeking a reliable and efficient solution for their setup needs.The CaseCart Combo Pole kit can be mounted to either side of the CaseCart. The set includes a combo pole, locking block, a bottom receiver and 8x screws. Every CaseCart top shelf has the holes pre drilled in the aluminium for easy installation. Keeping convenience in mind, the CaseCart Combo Pole fits perfectly inside of the CaseCart for easy transportation. This thoughtful design element allows you to carry your essential accessories anywhere with minimal effort, saving you time and enhancing productivity.
CaseCart Corner adapter 1/4" and 3/8”Enhance your CaseCart experience with the versatile and practical CaseCart Corner Adapter. This adapter is designed to enable you to mount accessories with 1/4 and 3/8 thread size onto the CaseCart top shelf. The CaseCart Corner Adapter can effortlessly replace any of the four corner screws on the top shelf.This allows for easy customization of your CaseCart setup and increases the flexibility of your workspace. With the ability to add a total of four CaseCart Corner Adapters, you can maximize your CaseCart's utility and tailor it to your specific needs. Enjoy the freedom to mount more accessories and create a more efficient workspace with this innovative add-on.
CaseCart Monitor BracketThe CaseCart Monitor Bracket adds a sturdy platform to mount any kind of monitor or accessory to the Casecart. The lightweight frame mounts to the four corners of the CaseCart top shelf, and can stay mounted to the top shelf even when the CaseCart is closed for easy and quick transport. Unfolding the Monitor Bracket is done in one single motion and requires no unlocking. Close the Monitor Bracket by simply raising the two orange latches.Made from strong aluminium to hold any monitor, the Monitor Bracket has 13x 3/8 screw holes on top and 2x 3/8 screw holes in the front to mount smaller accessories. Comes with one CaseCart Baby Pin - 5/8" with 3/8" ThreadNote: The CaseCart Foldable Monitor Bracket is incompatible with the CaseCart Combo Pole kit and CaseCart Corner adapter 1/4" and 3/8”.
CaseCart Mounting Plate with 28 mm spigotThe CaseCart Mounting Plate can be used to mount any VCT, Dovetail or any other camera mounting solution. The 28mm spigot fits into any universal Combo top with 28mm receiver, like the CaseCart Combo pole. The CaseCart Mounting Plate has multiple 1/4” and 3/8” screw holes so you can mount any accessories you would need.
CaseCart Soft Inlay KitThe CaseCart Soft Inlay Kit is a custom inlay set to give your delicate equipment some extra protection inside the CaseCart, and help you organise the things you bring to set.The set includes2 soft L-shaped walls1 soft bottom part,3 dividers with touch-fastening tapeso you can make your own custom sections if needed. The soft wall paddings and bottom are installed using the supplied adhesive Velcro strip.
FilmCart 100mm half ball mount set (blue bowl) FilmCart 100mm half ball mount set allows you to mount 100mm half ball on the Smartone and Smartone XL carts. 1/4″-20 Screw hole and 3/8″-16 hole placed on bowl allows you to screw additional accessories. Contains: Bowl 100mmPaddle2x handles long 280mmSteel pipe 660mm long (diameter 35mm)2x screws Technical data Material: AluminumCapacity: Max 35kgWeight:3,72 kg (without box)
FilmCart 150mm half ball mount set (blue bowl) FilmCart 150mm half ball mount set allows you to mount 150mm half ball on the Smartone and Smartone XL carts. You can also install it on our accessories mount LONG / SHORT by take off manfrotto head R069,40 from 35mm pipe. Material: AluminumCapacity: Max 35kgWeight: 3,62 kg (without box) Contains PaddleBowl 150mm2x handles long 280mmSteel pipe 660mm long (diameter 35mm)2 screws
FilmCart 75mm half ball mount set (blue bowl) SKU: 010 FilmCart 75mm half ball mount set allows you to mount 75mm half ball on the Smartone and Smartone XL carts. 1/4″-20 Screw hole and 3/8″-16 hole placed on bowl allows you to screw additional accessories. Material: AluminumCapacity: max 35kgWeight: 3,74 kg (without box) Contains Bowl 75mmPaddle2x handles long 280mmSteel pipe 660mm long (diameter 35mm)2x screws