Base Plate System for Sony BURANOSKU: A00601Base Plate System for Sony BURANO includes the ARCA Base Plate and ARCA Riser Plate– low-profile and compatible with any make of bridge plates that uses ARRI Standard height, this Base Plate design keeps the center of gravity low and as spread out as possible. This allows users to easily add shoulder pads or other accessories while maintaining optimal stability.Two rod clamps, one on either side of the base plate, provide powerful friction to prevent torque and rotation from your lens motors. The Riser Plate features an intuitive wedge-clamp locking system with a thumb-screw for added security and comes with 3/8”-16 mounting points to attach the Bridge Plate.Weight: 635 gDimensions: 125 x 130 x 36 mmIncluded ItemsARCA Riser PlateARCA Base Plate (Sony BURANO)

Wooden Camera Baseplate System SKU: A00306 Lens-centered ARCA Baseplate and Riser with the same low-profile footprint and optical center as their VENICE 2 counterparts. Designed to integrate seamlessly with the VENICE 2 Baseplate, Riser, Rods, and Camera Dovetails while maintaining the same low-profile footprint and optical center. Weight: 431.5 gDimensions: 100 mm x 116 mm x 32 mm Included Items 1 x ARCA Baseplate (Sony Rialto, Rialto 2)1 x ARCA Riser Plate (Sony VENICE, VENICE 2, Rialto, Rialto 2)

Wooden Camera Baseplate System SKU: A00310 Low-profile and compatible with any make of bridge plate that uses ARRI Standard height, this ARCA Baseplate design keeps the center of gravity as low and spread out as possible, allowing you to easily add shoulder pads or other accessories while maintaining optimal stability. Lens-centered Front and Rear Rod Clamps allow you to use longer rods or mount additional accessories to the back of your rig. A double-locking system on the Rod Clamps provides incredible friction to prevent torque and rotation from your lens motors. Intuitive access holes allow you to convert to a Rialto 2 setup without removing the Baseplate. The Riser Plate features an intuitive wedge-clamp locking system with a thumb-screw for added security. Comes with 3/8”-16 mounting points to attach the Bridge Plate. Weight: 759 g Dimensions: 400 mm x 50 mm x 147 mm Included Items 1 x ARCA Baseplate (Sony VENICE, VENICE 2)1 x ARCA Riser Plate (Sony VENICE, VENICE 2, Rialto, Rialto 2)

Wooden Camera Battery Swing SKU: 245700 Wooden Camera Battery Swing provides standard V-Mount and Gold Mount hole patterns for mounting WC battery plates and the D-Box (Alexa Mini). Quickly access the back of the camera by pulling the black pin and swinging open. Mounting bracket has integrated 15mm rod openings and is most commonly used in the lower position for bottom rods. Battery Swing can be mounted to top rods by moving the swing arm to the top row of holes on the battery bracket. Weight: 226.80gDimensions: 152.4 x 114.3 x 45.7 mm Includes 4 x M3 x 12mm Pan Head Screws 4 x M3 x 8mm Pan Head Screws 4 x M3 x 8mm Phillips Flat Head Screws (for attaching D-Box if original screws were lost)

Wooden Camera Bolt On 19mm Rod SKU: 144900 19mm Rod for bolting onto any 1/4-20 mounting point. Great for mounting 19mm accessories to cheeseplates. Rod length is 38mm. Includes 1 x 1/4-20 x 3/8" screwWeight 45 gDimensions 3.81 cm x 2.03 cm x 1.52 cm

Wooden Camera Bolt-On Canon EVF Adapter for Ultra HandlesSKU: A00785Securely attach the 15mm EOS C400 EVF Adapter directly to the Ultra Handle Front Riser or the front of the 1” Ultra Handle Extension when using the Ultra Handle 5” Kit. Attaches with a 3/8”-16 mounting screw using a 3/16 Hex and provides two 3/8”-16 mounting points in addition to the Canon EVF mount.

Wooden Camera Bolt-On Hook and Loop Plate Kit SKU: A00436 Customize your rig with Wooden Camera’s Bolt-On Hook and Loop Plate System, bundling three sizes of Bolt-On Hook and Loop plates. Securely mount items like your focus MDR or Timecode Box to any camera rig using the variable options in this kit including two plates consisting of 3/8-16 screw mounts with locating pins, and a 1/4-20 version. In addition to providing the maximum customization to your rig, our Hook and Loop Plate Kit provides a sleek and unobtrusive design featuring a matte black finish. Each Kit contains 3 Hook and Loop plates in the following increments: 4”x1.5” and 2 versions of 2”x2” plates. Included Items Bolt-On Mini Hook and Loop Plate (3/8"-16)Bolt-On Small Hook and Loop Plate (3/8"-16)Bolt-On Mini Hook and Loop Plate (1/4"-20)

Wooden Camera Cage for Sony FX3/FX30 SKU: A00342 A feature-rich, expandable, L-style Cage with ARCA Plate mounting points on the underside, 2x 3/8”-16 mounting points (one on the top, one on the side), 2x 1/4”-20 mounting points (both on the side), and a removable HDMI Cable Clamp to keep your setup secure and streamlined. The modular design allows for seamless expansion with additional Wooden Camera or third-party accessories.Included Items: Right Angle Hex KeysWeight: 195 gDimensions: 101.2 x 104.8 x 93.2 mm

Wooden Camera Cage Right Grip for Sony FX3/FX30 SKU: A00344 A wrap-around Right Grip with 3x 1/4”-20 and 1x 3/8”-16 mounting points and a pass-through cutaway for effortless battery swaps. Dimensions: 61 x 50.7 x 80 mmWeight: 39.1 gIncluded Items: Right Angle Hex Keys

Wooden Camera Canon 1/4"-20 Ridge Plate (Dual 3/8"-16 Mount)SKU: A00838This Ridge Plate was specifically designed for users who would like to use our Top Plate with the native Canon EOS C80 Carry Handle. This Ridge Plate easily attaches to the Top Plate or any mounting location with 3/8”-16 screws featuring 1-inch spacing. Because the Ridge Plate can be mounted in any direction, it opens up the option to mount compatible accessories like the 5” Ultra Handle Kit or Monitor Hinges.Weight: 20.59 gDimensions: 41.4 x 21.6 x 12.7 mm

Wooden Camera Carry Handle Cheese Plate for Sony FX3/FX30 SKU: A00345 A streamlined Cheese Plate that attaches directly to the stock Sony FX3 / Sony FX30 carry handle to enhance configurability. Includes 7 x 1/4”–20, 2 x 3/8”-16, and a cold shoe mounting point. Included Items:Right Angle Hex KeysWeight: 52.2gDimensions: 80 x 45 x 26 mm

Wooden Camera Core Accessory System for Blackmagic URSA Cine 12K/17KSKU: K10040Our Core System was designed to provide users with the essentials of connectivity while providing a sturdy foundation for growing their build.Top PlateTo enhance the capabilities of the camera, a Top Plate emphasizing air flow and connectivity is secured to the top of the camera via three 1/4”-20 screws along the camera's center mounting points. In addition, a removable 15mm Dual rod clamp allows users to connect items like the Blackmagic EVF or additional 3rd party accessories. This Top Plate is compatible with the stock Blackmagic URSA handleRiser Plate and ARCA Base PlateThe foundation of this Core System includes a Riser Plate and ARCA Base Plate that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The Riser Plate facilitates an open design allowing efficient airflow to the camera. With these plates combined, they are compatible with any bridge plates that use ARRI Standard height. Utilizing the built-in ARCA system, it allows for quick transitions between steadicam, shoulder, or tripod workflows with Wooden Camera ARCA accessoriesIncluded ItemsRiser Plate for Blackmagic URSA Cine 12K/17KARCA Base PlateTop Plate for Blackmagic URSA Cine 12K/17KSpecificationsWeight: 1007 gDimensions: 161 x 135 x 96 mm

Wooden Camera Core Accessory System for Canon EOS C400The Core Accessory System for Canon EOS C400 provides an abundance of accessory mounting points while maintaining a compact setup.The Base Plate and Riser System positions the camera at the appropriate optical height for mounting accessories. The ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows.The Left and Right Top Plates are symmetrical and can be used on either side for additional mounting points.The Top Handle Cheese Plate attaches seamlessly to the EOS C400 handle for maximum comfort, adding mounting points on the top and side. The cutout design allows easy access to the EOS C400 hot shoe for mounting the camera’s shotgun microphone shock mount.The NATO Side Rail mounts to the Top Plate near the rear of the camera without touching the EOS C400’s handle, providing additional mounting points and the ability to use NATO clamp accessories. Patented anti-twist safety pins ensure secure mounting.The Battery Slide Pro Gold Mount / Battery Slide Pro V-Mount attaches directly to the back of the camera without rods, delivering battery power to the camera via a 4-pin XLR connector while maintaining access to the battery compartment for hot-swapping the internal BPU battery. The DC Input on the camera-right side can be used to hot-swap between block and onboard batteries. 3x D-Tap ports provide accessory power at battery voltage. A digital fuse, when tripped, cuts off accessory outputs while leaving the camera poweredIn the box1 x Battery Slide Pro Gold Mount/Battery Slide Pro V-Mount1 x Base Plate System for Canon EOS C4002 x Top Plate for Canon EOS C400 (Left/ Right)1 x Top Handle Cheese Plate for Canon EOS C4001 x NATO Side Rail for Canon EOS C400Technical dataCore Accessory System for Canon EOS C400 (Gold Mount)Weight: 1070 gDimensions: 192 x 160 x 110 mmCore Accessory System for Canon EOS C400 (V-Mount)Weight: 1080 gDimensions: 192 x 160 x 110 mm

Wooden Camera Core Accessory System for Canon EOS C400The Core Accessory System for Canon EOS C400 provides an abundance of accessory mounting points while maintaining a compact setup.The Base Plate and Riser System positions the camera at the appropriate optical height for mounting accessories. The ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows.The Left and Right Top Plates are symmetrical and can be used on either side for additional mounting points.The Top Handle Cheese Plate attaches seamlessly to the EOS C400 handle for maximum comfort, adding mounting points on the top and side. The cutout design allows easy access to the EOS C400 hot shoe for mounting the camera’s shotgun microphone shock mount.The NATO Side Rail mounts to the Top Plate near the rear of the camera without touching the EOS C400’s handle, providing additional mounting points and the ability to use NATO clamp accessories. Patented anti-twist safety pins ensure secure mounting.The Battery Slide Pro Gold Mount / Battery Slide Pro V-Mount attaches directly to the back of the camera without rods, delivering battery power to the camera via a 4-pin XLR connector while maintaining access to the battery compartment for hot-swapping the internal BPU battery. The DC Input on the camera-right side can be used to hot-swap between block and onboard batteries. 3x D-Tap ports provide accessory power at battery voltage. A digital fuse, when tripped, cuts off accessory outputs while leaving the camera poweredIn the box1 x Battery Slide Pro Gold Mount/Battery Slide Pro V-Mount1 x Base Plate System for Canon EOS C4002 x Top Plate for Canon EOS C400 (Left/ Right)1 x Top Handle Cheese Plate for Canon EOS C4001 x NATO Side Rail for Canon EOS C400Technical dataCore Accessory System for Canon EOS C400 (Gold Mount)Weight: 1070 gDimensions: 192 x 160 x 110 mmCore Accessory System for Canon EOS C400 (V-Mount)Weight: 1080 gDimensions: 192 x 160 x 110 mm

Wooden Camera Core Accessory System for Canon EOS C80SKU: K10034Our Core System was designed to provide users with the essentials of connectivity while providing a sturdy foundation for growing their build. This lightweight system includes a Top Plate and Ridge Adapter, so users can make use of the native Canon EOS C80 handle.The foundation of this Core System includes an ARCA Base Plate and ARCA Riser that keep your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The built-in ARCA system allows for quick transitions between Steadicam, shoulder, or tripod workflows.Included ItemsARCA Base Plate for Canon EOS C80/ C400ARCA Riser Plate for Canon EOS C80Top Plate for Canon EOS C80Canon 1/4"-20 Ridge Plate (Dual 3/8"-16 Mount)SpecificationsWeight: 789.3 gDimensions: 120 x 117.7 x 89.9 mm

Wooden Camera Core Accessory System for FUJIFILM GFX ETERNA 55SKU: 50-K10002This Core System was designed to allow users a solid but lightweight foundation to attach accessories to their camera while accommodating the native handle. The Riser Plate features dual 15mm rod mounts, which are compatible with industry-standard rod-based accessories, allowing for easy mounting of follow focus systems, matte boxes, and other essential tools. Additionally, the ARCA-compatible Base Plate allows for direct attachment of ARRI Standard Studio Bridge Plates, expanding rigging possibilities.The integrated ARCA rails on the Riser Plate allow for effortless switching between different camera support systems, such as tripods, handheld, and Steadicam, without the need for time-consuming reconfiguration. The included Side Rails offer strategic enhanced accessory attachment options.The Rear Side Rail attaches directly to the camera body, while the Side Rail can be mounted securely to both the Top Side and Riser Plate. Both rails provide the option of NATO, 1/4”-20 and 3/8”-16 mounting points, allowing you to customize your setup with monitors, microphones, lights, and other accessories.SpecificationsWeight: 920.8 gDimensions: 199.8 x 380 x 22.1 mmIncludesA00907 Rear Side Rail for FUJIFILM GFX ETERNA 55A00969 Top Plate Side Extension for FUJIFILM GFX ETERNA 55A00914 Side Rail for FUJIFILM GFX ETERNA 5550-K10003 Base Plate System for Fujifilm GFX ETERNA

Core Accessory System for Sony BURANOSKU: K10027The Core Accessory System for Sony BURANO is a lightweight approach to extending the camera's on-set capabilities. The system includes an ARCA Base Plate and ARCA Riser as well as a Top Plate and Ultra Handle 5” Kit. The intention behind this system is to keep the camera build compact, but effective– so we’ve added an abundance of mounting points allowing users to add accessories. The Core Accessory System provides the fundamental building blocks users need to maximize the functionality of the camera on-set.Weight: 1547 gDimensions: 162 x 130 x 75 mmIncluded ItemsBase Plate System for Sony BURANOTop Plate (Sony BURANO)Ultra Handle 5" (3/8"-16, Universal)

Wooden Camera Core Cage System for Canon EOS C50SKU: 50-K10057The Core Cage System for Canon EOS C50 offers essential protection and versatile mounting for cinema-style builds. The system includes the Cage L-Bracket, Top Plate, Cage Grip, and a Mini Top Handle. Each component features exceptional materials and precision-engineered mounting points that support a wide range of accessories, allowing you to customize your setup for any production. Integrated cable management helps maintain reliable HDMI connection. A 1/4”-20 Cold Shoe and Round Bubble Level are also included to expand accessory compatibility and ensure proper leveling. Together, these core components deliver a dependable, expandable cage system that serves as the backbone for any Canon EOS C50 rig. To mount the bracket onto a baseplate, the ARCA Adapter Plate is required. This ensures compatibility with the LW 15mm Baseplate and other standard mounting solutions for both cinema and photography configurations.Included ItemsTop Plate for Canon EOS C50Cage L-Bracket for Canon EOS C50Cage Grip for Canon EOS C50Mini Top Handle (3/8-16)1/4-20 Cold ShoeRound Bubble LevelSpecificationsWeight: 771.1 gDimensions: 361 x 86 x 268 mm

Core Cage System for Sony FX2SKU: 50-K10010The Core Cage System for Sony FX2 offers a robust foundation for filmmakers, making a full cinema-style build possible. This system provides comprehensive protection and versatile mounting options with its Cage L-Bracket, Cage Grip, Top Plate, and a 3/8”-16 compatible handle. These components feature integrated cable management, allowing secure attachment of cables like the HDMI cable, directly to the camera body for a tidier and more reliable setup. The Mini Top Handle further enhances functionality with a lightweight grip and industry-standard mounting points for additional gear. Together, these essential cage accessories and handle provide an expandable rig solution that adapts to evolving production needs.Included ItemsCage L-Bracket for Sony FX2Top Plate for Sony FX2Cage Grip for Sony FX2Mini Top Handle (3/8-16)SpecificationsWeight: 293.9 gDimensions: 228 x 155.5 x 108 mm

Wooden Camera Crossbar for Elite Handheld AccessoriesThe Crossbars are durable, high-performance support solution built for speed, flexibility, and strength in professional camera setups. Available in three configurations19mm Studio15mm Studio15mm LWSeach Crossbar is precision-machined from 7075 aluminum, ensuring it holds up in even the most demanding shooting environments.All three versions feature a unique design that allows the Crossbar to remain mounted to the rods while the camera is attached to an ARRI-standard dovetail, making transitions between handheld and tripod setups faster and more efficient. Integrated 32mm pivoting rosettes allow for dynamic adjustment of accessories or handgrips to and from the camera.The 19mm Studio and 15mm Studio versions include additional 15mm LWS cut-outs, adding even more versatility to your build. Every Crossbar includes stainless steel, DLC-coated knobs with ergonomic finger grooves for easy tightening by hand. A center hole on each knob accommodates a 3/16” or 4mm hex tool for added torque when needed. To help with fast camera identification or build personalization, each Crossbar also comes with eight color rings (two each of red, blue, green, and yellow)Choose your configuration from19mm Studio Crossbar15mm Studio Crossbar15mm LWS CrossbarIncluded ItemsElite Handheld Accessories Color Ring PackSpecifications19mm Studio Crossbar: Weight: 363.8g | Dimensions: 216 x 23.7 x 56.3 mm15mm Studio Crossbar: Weight: 397.8g | Dimensions: 216.5 x 32 x 54.8 mm15mm LWS Crossbar: Weight: 377.4 g | Dimensions: 216.5 x 33.2 x 53.8 mm

Wooden Camera Crossbar for Elite Handheld AccessoriesThe Crossbars are durable, high-performance support solution built for speed, flexibility, and strength in professional camera setups. Available in three configurations19mm Studio15mm Studio15mm LWSeach Crossbar is precision-machined from 7075 aluminum, ensuring it holds up in even the most demanding shooting environments.All three versions feature a unique design that allows the Crossbar to remain mounted to the rods while the camera is attached to an ARRI-standard dovetail, making transitions between handheld and tripod setups faster and more efficient. Integrated 32mm pivoting rosettes allow for dynamic adjustment of accessories or handgrips to and from the camera.The 19mm Studio and 15mm Studio versions include additional 15mm LWS cut-outs, adding even more versatility to your build. Every Crossbar includes stainless steel, DLC-coated knobs with ergonomic finger grooves for easy tightening by hand. A center hole on each knob accommodates a 3/16” or 4mm hex tool for added torque when needed. To help with fast camera identification or build personalization, each Crossbar also comes with eight color rings (two each of red, blue, green, and yellow)Choose your configuration from19mm Studio Crossbar15mm Studio Crossbar15mm LWS CrossbarIncluded ItemsElite Handheld Accessories Color Ring PackSpecifications19mm Studio Crossbar: Weight: 363.8g | Dimensions: 216 x 23.7 x 56.3 mm15mm Studio Crossbar: Weight: 397.8g | Dimensions: 216.5 x 32 x 54.8 mm15mm LWS Crossbar: Weight: 377.4 g | Dimensions: 216.5 x 33.2 x 53.8 mm

Wooden Camera Crossbar for Elite Handheld AccessoriesThe Crossbars are durable, high-performance support solution built for speed, flexibility, and strength in professional camera setups. Available in three configurations19mm Studio15mm Studio15mm LWSeach Crossbar is precision-machined from 7075 aluminum, ensuring it holds up in even the most demanding shooting environments.All three versions feature a unique design that allows the Crossbar to remain mounted to the rods while the camera is attached to an ARRI-standard dovetail, making transitions between handheld and tripod setups faster and more efficient. Integrated 32mm pivoting rosettes allow for dynamic adjustment of accessories or handgrips to and from the camera.The 19mm Studio and 15mm Studio versions include additional 15mm LWS cut-outs, adding even more versatility to your build. Every Crossbar includes stainless steel, DLC-coated knobs with ergonomic finger grooves for easy tightening by hand. A center hole on each knob accommodates a 3/16” or 4mm hex tool for added torque when needed. To help with fast camera identification or build personalization, each Crossbar also comes with eight color rings (two each of red, blue, green, and yellow)Choose your configuration from19mm Studio Crossbar15mm Studio Crossbar15mm LWS CrossbarIncluded ItemsElite Handheld Accessories Color Ring PackSpecifications19mm Studio Crossbar: Weight: 363.8g | Dimensions: 216 x 23.7 x 56.3 mm15mm Studio Crossbar: Weight: 397.8g | Dimensions: 216.5 x 32 x 54.8 mm15mm LWS Crossbar: Weight: 377.4 g | Dimensions: 216.5 x 33.2 x 53.8 mm

Wooden Camera D-Box Support Bracket for FUJIFILM GFX ETERNA 55SKU: A00933The D-Box Support Bracket is essential for preventing accidental disconnections between the D-Box and the camera's V-Mount, especially during activities that may result in camera shake or sudden impact. It attaches to the Riser Plate and secures the D-Box connection, allowing minor height adjustments to accommodate different camera manufacturers' tolerances. The bracket can be tightened using a 3/16" hex tool, a flat head driver, or by hand, ensuring a secure fit and minimizing camera movement. Please note: The Riser Plate and D-Box must be purchased separately for this accessory to function properly.SpecificationsWeight: 21 gDimensions: 49.1 x 10.1 x 22.5 mm

Wooden Camera Dovetail Clamp SKU: 156700 Wooden Camera Dovetail Clamp adapts any camera system, baseplate, or accessory to an ARRI standard dovetail. Great for use with our Quick Bases, Universal Baseplate, and Easy Riser systems. Dovetail Clamp features 2 x 3/8-16 low profile screws2 x 1/4-20 low profile screwsWeight 2.72 kgDimensions 10.16 cm x 11.43 cm x 1.91 cm