Wooden Camera Core Accessory System for FUJIFILM GFX ETERNA 55

Wooden Camera Top Plate System for FUJIFILM GFX ETERNA 55SKU: K10007This versatile 3-part modular design allows users to optimize their camera rig by offering multiple configurations. This design includes a Side Plate, Front Plate, and Rear Plate – these can be used together in different configurations, depending on the needs of the shoot.Examples of different configurations: the Side Plate can be detached to provide clearance for the Power Strip, and the Rear Plate can be removed to use the native handle. This ensures that you can use our Top Plate System regardless of the accessories needed on your camera.The Top Plate System adds a multitude of 1/4”-20 and 3/8”-16 mounting points across the top of the camera. Using the forward-facing mounting points on the Side and Front of the plate, users can mount a wide array of accessories, such as Bolt-On rods or the Dual Rod clamp.To safeguard the camera from potential damage caused by overtightened or improperly installed accessories, the Top Plate System incorporates blind holes, preventing screws from being inserted too far. Four tie-down points can secure the Top Plate to the camera.IncludesA00970 Front Top Plate Extension for FUJIFILM GFX ETERNA 55A00969 Side Top Plate Extension for FUJIFILM GFX ETERNA 55A00971 Rear Top Plate Extension for FUJIFILM GFX ETERNA 55

Wooden Camera Base Plate System for FUJIFILM GFX ETERNA 55SKU: 50-K10003Our Base Plate System offers a secure, quick-release attachment point below the base for easy transitions between setups. The ARCA-compatible Base Plate provides versatile mounting, allowing direct attachment of our Studio Bridge Plates and, when removed, connections to our ARCA Steadicam Plate and ARCA Shoulder Plate.The Riser Plate features an integrated ARCA dovetail, enabling quick transitions between setups that utilize our ARCA plates. Two front-facing 15mm LWS Rod Mounts allow for connecting accessories, and individual tie-down points for rods ensure a secure connection.The plate attaches to the camera body via two 3/8”-16 screws, setting it at its optical center for bridge plates and proper alignment of lens accessories. This plate also provides access to the front-facing knob and switch on the camera. Additionally, a rear ¼”-20 screw mounting point is designed to secure our D-Box™ to the Riser, preventing accidental discharge.SpecificationsWeight: 548.8 gDimensions: 199.8 x 248.5 x 22.1 mmIncludesA00233 ARCA Base PlateA00901 Riser Plate for FUJIFILM GFX ETERNA 55

Wooden Camera Side Rail Kit for FUJIFILM GFX ETERNA 55SKU: 50-K10004Our Side Rail Kit attaches securely to both the Side and Rear Top Plate as well as the Riser Plate. It creates a secure camera base with extra mounting points on the sides allowing users to customize their camera setup with accessories. The rail incorporates enhanced safety features to protect both accessories and the camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory.Additionally, blind holes are strategically placed to prevent accidental damage to your camera body during installation or use with 1/4”-20 or 3/8”-16 mounted accessories. These Side Rails incorporate a Wooden Camera patented line of products, featuring their innovative dual safety NATO design for added security and peace of mind.SpecificationsWeight: 150.6 gDimensions: 158.7 x 57 x 27.4 mmIncludesA00914 Side Rail for FUJIFILM GFX ETERNA 55 2x

Wooden Camera Riser Plate for FUJIFILM GFX ETERNA 55SKU: A00901The Riser Plate features integrated ARCA rails, enabling quick transitions between bridge plates, Shoulder, and Steadicam setups that utilize our ARCA plates.Two front-facing 15mm LWS Rod Mounts allow for connecting lens motors and other accessories. Individual tie-down points for rods ensure a secure connection and prevent rod rotation. Note: The rod pass-through feature has been removed due to camera dimensions and optical center requirements.The plate attaches to the camera body via two 3/8”-16 screws, setting it at its optical center for bridge plates and proper alignment of lens accessories. Raised edges on the plate conform to the camera, and pins near the tie-in points prevent rotation. This plate also provides access to the front-facing knob and switch on the camera.In addition, a rear 1/4”-20 screw mounting point is designed to secure our D-Box™ for FUJIFILM GFX ETERNA 55 to the Riser using our D-Box Support Bracket, preventing accidental discharge of the D-Box from the camera’s V-Mount during operation.Weight: 355.2 gDimensions: 192 x 127.2 x 17 mm

Wooden Camera Rear Side Rail for FUJIFILM GFX ETERNA 55SKU: A00907This Rear Side Rail attaches directly to the rear mounting points on the camera body after the camera's connector protection bracket is removed. Its four mounting points provide a secure connection to the camera body and protect the camera's ports. This rail incorporates 3/8"-16 and 1/4"-20 mounting points, as well as a NATO rail along the length, allowing for a wide range of accessories to be attached.The NATO Rail provides enhanced safety features to protect both accessories and the camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory. Through holes were designed to reduce weight and allow screw-in accessories, without causing damage to the camera body. This Rear Side Rail incorporates a Wooden Camera patented line of products, featuring our innovative dual safety NATO design for added security and peace of mind.SpecificationsWeight: 53.52 gDimensions: 123.7 x 31.9 x 29.8 mm

Wooden Camera Side Rail for FUJIFILM GFX ETERNA 55SKU: A00914The Side Rail is a versatile mounting solution for camera accessories. It attaches securely to both the top and riser plate using 1/4”-20 screws, which can be tightened with a 3/16” hex tool. This rail provides multiple mounting points for your accessories, including both 1/4”-20 and 3/8”-16 threaded holes, ensuring compatibility with a wide range of NATO-compatible accessories. Its symmetrical design allows for use on either the left or right side of your camera setup, providing flexibility in your rig configuration.The NATO Rail incorporates enhanced safety features to protect both your accessories and your camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory. Additionally, blind holes prevent accidental damage to your camera body during installation or use. This Side Rail incorporates a Wooden Camera patented line of products, featuring their innovative dual safety NATO design for added security and peace of mind. SpecificationsWeight: 75.3 gDimensions: 158.7 x 28.5 x 27.4 mm