Wooden Camera 19mm Rod 19mm diameter, hard anodized, thick walled, aluminum iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. ATTENTION! Sold as single rods. If a pair of rods are required, add two to cart. 19mm Rod Available in lengths 3" / 7.62 cm6" / 15.24 cm9" / 22.86 cm12" / 30.48 cm15" / 38.1 cm18" / 45.72 cm24" / 60.96 cm
Wooden Camera 19mm Rod 19mm diameter, hard anodized, thick walled, aluminum iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. ATTENTION! Sold as single rods. If a pair of rods are required, add two to cart. 19mm Rod Available in lengths 3" / 7.62 cm6" / 15.24 cm9" / 22.86 cm12" / 30.48 cm15" / 38.1 cm18" / 45.72 cm24" / 60.96 cm
Wooden Camera 19mm Rod 19mm diameter, hard anodized, thick walled, aluminum iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more. ATTENTION! Sold as single rods. If a pair of rods are required, add two to cart. 19mm Rod Available in lengths 3" / 7.62 cm6" / 15.24 cm9" / 22.86 cm12" / 30.48 cm15" / 38.1 cm18" / 45.72 cm24" / 60.96 cm
Wooden Camera 19mm Rod Clamp to ARRI Rosette SKU: 220100 19mm Rod Clamp to ARRI Rosette allows you to attach a single ARRI standard handgrip to a 19mm rod. This is ideal for creating a compact configuration with one of our Wooden Camera Handgrips, Rosette Handle (Brown Leather), (Black Leather), and (Rubber). Third party ARRI handgrips will also work. Includes Ratcheting M4 thumbscrewIncludes Threaded M6 ARRI rosette Weight 136 gDimensions 50.8 mm x 76.2 mm x 50.8 mm
Wooden Camera 2060/2575/120EX Dovetail (12) SKU: 143600 12 inch ARRI standard dovetail with safety catches on each end. Dovetail attaches natively to O'Connor 2060O'Connor 2575O'Connor 120EXSachtler Cine 30 2060/2575/120EX Dovetail Specifications Weight 610 gDimensions 304.8 mm x 95.2 mm x 23 mm
Wooden Camera A-Lock SKU: 144500 Mount for Quick Back and REDmote. Use to hang Quick Back or REDmote in alternative configurations. Attaches via 1/4-20 screws. 2 x 1/4-20 x 3/8" screw Weight 42 gDimensions 47.7 mm x 40.3 mm x 10.3 mm
Wooden Camera Accessory Plate System SKU: A00434 Customize your rig with Wooden Camera’s Accessory Plate Kit, bundling multiple sizes of cheese plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR, Accessory Cube, WC Battery Plates, and more to any camera rig using the variable options in this kit including the 3/8-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Accessory Plate System provides a sleek and unobtrusive design featuring a matte black finish. Each Accessory Kit contains four cheese plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Included Items Bolt-On Accessory Rail ClampUniversal Dual Rod Clamp for Bolt-On AccessoriesUniversal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female)28mm Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female)Mini Accessory Rail Kit with Safety (100 mm)Mini Accessory Rail Kit with Safety (60 mm)Mini Accessory Rail Kit with Safety (40 mm)Accessory Plate (12,70 cm x 12,70 cm)Accessory Plate (7,62 cm x 12,70 cm)Accessory Plate (5,08 cm x 12,70 cm)Accessory Plate (5,08 cm x 5,08 cm)
Wooden Camera Accessory System for Sony FX3/FX30 A professional camera support system designed for the Sony FX3/FX30 camera. The FX3/FX30 Elite Accessory System includes: Cage; Cage Grip; Top Plate; Carry Handle Cheese Plate; Base Plate; 2x 9” Rods; 8” Safety Dovetail; D-Tap Dummy Battery; Micro Battery Slide (Gold Mount), and Hex Keys. K10022 | Accessory System for Sony FX3/FX30 (Gold Mount) Weight: 1479.3 gDimensions: 228 mm x 155.5 mm x 108 mm K10023 | Accessory System for Sony FX3/FX30 (V-Mount) Weight: 1500.6 gDimensions: 228 mm x 155.5 mm x 102 mm Included Items Cage for Sony FX3/FX30 Top Plate for Sony FX3/FX30 Cage Right Grip for Sony FX3/FX30 Carry Handle Cheese Plate for Sony FX3/FX30 Micro Battery Plate Battery Slide LW 15mm Baseplate Safety Dovetail (8") D-Tap to Sony NP-FZ100 Battery (Dummy) 2 x 15mm Rod (9") Right Angle Hex Keys
Wooden Camera Accessory System for Sony FX3/FX30 A professional camera support system designed for the Sony FX3/FX30 camera. The FX3/FX30 Elite Accessory System includes: Cage; Cage Grip; Top Plate; Carry Handle Cheese Plate; Base Plate; 2x 9” Rods; 8” Safety Dovetail; D-Tap Dummy Battery; Micro Battery Slide (Gold Mount), and Hex Keys. K10022 | Accessory System for Sony FX3/FX30 (Gold Mount) Weight: 1479.3 gDimensions: 228 mm x 155.5 mm x 108 mm K10023 | Accessory System for Sony FX3/FX30 (V-Mount) Weight: 1500.6 gDimensions: 228 mm x 155.5 mm x 102 mm Included Items Cage for Sony FX3/FX30 Top Plate for Sony FX3/FX30 Cage Right Grip for Sony FX3/FX30 Carry Handle Cheese Plate for Sony FX3/FX30 Micro Battery Plate Battery Slide LW 15mm Baseplate Safety Dovetail (8") D-Tap to Sony NP-FZ100 Battery (Dummy) 2 x 15mm Rod (9") Right Angle Hex Keys
Wooden Camera AIR EVF Extension ArmSKU: 259100 AIR EVF Extension Arm (Sony Venice, Venice 2, DVF-EL200 EVF) is an ultra-lightweight extension for the AIR EVF Mount (Sony Venice, Venice 2, DVF-EL200 EVF) and also the Sony viewfinder mount that is included with the EVF. The arm extends from 10.5 inches (26 cm) to 14.5 inches (37 cm) and a friction knuckle allows for quick tilting of the EVF without having to loosen a thumbscrew. Included on the arm is an eyepiece leveller attachment point for adding ARRI or 3rd party EPLs. The tool-less design allows quick installation and removal of the viewfinder. Weight: 202g Dimensions: 266.7 x 38.1 x 63.5 mm
Wooden Camera ARCA Base Plate for Canon EOS C80/C400SKU: A00758The Base Plate allows you to remove the Bridge Plate Dovetail to attach to a Studio Base Plate or directly to a dovetail. Optional 15mm rods in a lightweight spacing add support to your setup with other LWS accessories, like the Universal Lens Support (15mm LWS). Tie-downs let you quickly adjust the positioning of the Bridge Plate on accessories like the Safety Dovetail 8”, Unified Bridge Plate, or the Shoulder Rig V3. A safety button prevents accidental release.The ARCA Riser Plate for Canon EOS C400 or ARCA Riser Plate for Canon EOS C80 are required to attach the Base Plate to the camera and to maintain the proper height for studio baseplate and rod use.Weight: 327 gDimensions: 89 x 117.7 x 25.8 mm
Wooden Camera ARCA Base Plate (RED KOMODO-X)SKU: A00487 The ARCA Base Plate was designed for dual 15mm LW rods and allows for maintaining optimal lens height for studio-style builds. This Base Plate comes with a quick-release lever to be used with the ARCA Riser when lightweight builds are necessary. This Base Plate includes a Bridge Plate Dovetail for use with either 15mm or 19mm Bridge Plates and tripod plates.Included ItemsBridge Plate Dovetail P00109SpecificationsWeight: 337 gDimensions: 88.25 x 117.5 x 44.5 mm
Wooden Camera ARCA Baseplate (ALEXA 35) SKU: A00360 Low-profile and compatible with any make of bridge plate that uses ARRI Standard height, this ARCA Baseplate design keeps the center of gravity as low and wide as possible, allowing you to easily add shoulder pads or other accessories while maintaining optimal stability. Lens-centered Front and Rear Rod Clamps allow you to use longer rods or mount additional accessories to the back of your rig. A double-locking system on the Rod Clamps provides incredible friction to prevent torque and rotation from your lens motors. Weight: 382 g Dimensions: 156 mm x 139 mm x 30 mm
ARCA Baseplate (Sony BURANO) SKU: A00530 The ARCA Base Plate was designed for dual 15mm LW rods and maintains optimal lens height for studio-style builds. This Base Plate includes two 3/8”-16 screws and two anti-twist pins built into the bottom of the plate for a secure connection. Additionally, six 3/8”-16 and four 1/4”-20 with anti-twist ports on the sides and front of the plate allow users to mount more accessories along the Base Plate. Our ARCA system allows quick adjustments from a studio build to a Steadicam or Handheld build in seconds. Included Items: 3/16” Hex KeyWeight: 410.95 gDimensions: 125 x 130 x 26 mm
Wooden Camera ARCA Baseplate (Sony Rialto, Rialto 2) SKU: A00276 Lens-centered and fully integrated with the Baseplate. Easily detach and reattach while maintaining the same low-profile footprint and optical center. Weight: 207 gDimensions: 54 mm x 130 mm x 22 mm
Wooden Camera ARCA Baseplate (Sony VENICE, VENICE 2) SKU: A00275 The ARCA Baseplate keeps the center of gravity low, allowing you to add shoulder pads or other accessories while maintaining optimal stability. Lens-centered front and rear Rod Clamps ensure extra security and the ability to mount accessories to the back of your build. A high-friction, double-locking system on the rod clamps prevent torque and rotation from your lens motors. Intuitive access holes allow you to convert to a Rialto 2 setup without removing the Baseplate. The elegant cutout pattern is lightweight, but strong. Weight: 442 g Dimensions: 175 mm x 130 mm x 22 mm
Wooden Camera ARCA Riser Plate SKU: A00233 The ARCA Riser Plate features an intuitive wedge-clamp locking system with a wing thumb-screw for added security. Comes with 3/8”-16 mounting points to attach the Bridge Plate. Weight: 442 gDimensions: 175 mm x 130 mm x 22 mm
Wooden Camera ARCA Riser Plate for Canon EOS C80SKU: A00828The ARCA Riser Plate mounts to the bottom of the Canon EOS C80, keeping the camera at the proper optical height when attached to the Base Plate. Included in the design is a Lens Adapter Support Rod to reduce the stress off the RF Mount. An adjustable slide rail allows you to adjust the position of the plate to accommodate your lens mount adapter.The back of the Riser Plate includes a mounting point for the Battery Slide Pro. 10x 1/4”-20 mounting points along the bottom let you add accessories like the ARCA Shoulder Plate and Steadicam Plate without a Bridge Plate.Weight: 205.9 gDimensions: 120 x 105.3 x 44.6 mm
Wooden Camera Bag Of Screws SKU: 173800 An assortment of Wooden Camera's most common 1/4-20 screws used for Handles, NATOs, Rod Clamps, Shoulder Rigs, and more. 4 of each screw type are included. 1/4-20 x 1/4 socket cap1/4-20 x 3/8 socket cap1/4-20 x 3/8 button head1/4-20 x 1/2 socket cap1/4-20 x 5/8 button head1/4-20 x 3/4 socket cap1/4-20 x 7/8 button head1/4-20 x 1 socket cap
Wooden Camera Base Plate System (ALEXA 35) SKU: A00416 Low-profile and compatible with any make of bridge plate that uses ARRI Standard height, this ARCA Baseplate design keeps the center of gravity as low and wide as possible, allowing you to easily add shoulder pads or other accessories while maintaining optimal stability. Lens-centered Front and Rear Rod Clamps allow you to use longer rods or mount additional accessories to the back of your rig. A double-locking system on the Rod Clamps provides incredible friction to prevent torque and rotation from your lens motors. The Riser Plate features an intuitive wedge-clamp locking system with a thumb-screw for added security. Comes with 3/8”-16 mounting points to attach the Bridge Plate. Weight: 608.5 gDimensions: 156 mm x 139 mm x 40 mm Included Items 1 x ARCA Baseplate (ALEXA 35)1 x ARCA Riser Plate
Wooden Camera Base Plate System for Blackmagic URSA Cine 12K/17KSKU: K10037 This system includes a Riser Plate and ARCA Base Plate that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The Riser Plate facilitates an open design, allowing efficient airflow to the camera.These plates combined are compatible with any bridge plates that use ARRI Standard height. Utilizing the built-in ARCA system, it allows for quick transitions between Steadicam, shoulder, or tripod workflows with Wooden Camera ARCA accessories. Four rod clamps– two on either side of the riser plate– provide powerful friction to prevent torque and rotation from your lens motors.Two included 3/8”-16 screws allow the plate to fasten to the bottom of the camera, while two pins incorporated into the riser plate prevent the riser from twisting, making for a secure connection. The Riser Plate features an intuitive wedge-clamp locking system with a thumb-screw for added security and comes with 3/8”-16 mounting points to attach the Riser Plate. These plates combined are compatible with any bridge plates that use ARRI Standard height such as our 19mm Bridge Plate. Included ItemsRiser Plate for Blackmagic URSA Cine 12K/17KARCA Base PlateSpecificationsWeight: 675.9 gDimensions: 160.6 x 135 x 43.1 mm
Base Plate System for Canon EOS C400SKU: A00773The ARCA Base Plate and Riser System positions the camera at the appropriate optical height for mounting accessories and allows for quick setup transitions. The Riser Plate can be used alone with the ARCA Shoulder Pad or ARCA Steadicam Plate; the Base Plate is required for tripod or dovetail systems. The ARCA Riser Plate includes a Lens Mount Adapter with an adjustable rail to distribute the strain from the lens mount to the camera body while preventing the shifting of accessories (like the RF to PL mount) while swinging out lenses. Side-facing 1/4”-20 mounting points let you keep accessories attached while transitioning between setups.The Base Plate allows you to remove the Bridge Plate Dovetail to attach to a Studio Base Plate or directly to a dovetail. Optional 15mm rods in a lightweight spacing add support to your setup with other LWS accessories, like the Universal Lens Support (15mm LWS). Tie-downs let you quickly adjust the positioning of the Bridge Plate on accessories like the Safety Dovetail 8”, Unified Bridge Plate, or the Shoulder Rig V3.Included ItemsARCA Baseplate for Canon EOS C400ARCA Riser Plate for Canon EOS C400SpecificationsWeight: 553.4 gDimensions: 114.2 x 132.1 x 54.1 mm
Wooden Camera Base Plate System for Canon EOS C80SKU: K10033The Base Plate System includes an ARCA Base Plate and ARCA Riser that positions the camera at the appropriate optical height for mounting accessories and allows for quick setup transitions.The Wooden Camera Riser Plate can be used alone with the ARCA Shoulder Plate or ARCA Steadicam Plate; the Base Plate is required for tripod or dovetail systems.The Wooden Camera ARCA Riser Plate includes a Lens Mount Adapter with an adjustable rail to distribute any strain from the lens mount to the camera body. This Adapter also prevents the shifting of accessories (like the RF to PL mount) while adjusting lenses. Side-facing 1/4”-20 mounting points let you keep accessories attached while transitioning between setups. The Base Plate allows you to remove the Bridge Plate Dovetail to attach to a Studio Base Plate or directly to a safety dovetail. This plate includes spacing to add support to your setup with other LWS accessories, like the Universal Lens Support (15mm LWS). Tie-downs let you quickly adjust the positioning of the Bridge Plate on accessories like the Safety Dovetail 8”, Unified Bridge Plate, or the Shoulder Rig V3.Included ItemsARCA Riser Plate for Canon EOS C80ARCA Base Plate for Canon EOS C80/ C400SpecificationWeight: 535.2 gDimensions: 120 x 117.7 x 70.4 mm
Wooden Camera Base Plate System for FUJIFILM GFX ETERNA 55SKU: 50-K10003Our Base Plate System offers a secure, quick-release attachment point below the base for easy transitions between setups. The ARCA-compatible Base Plate provides versatile mounting, allowing direct attachment of our Studio Bridge Plates and, when removed, connections to our ARCA Steadicam Plate and ARCA Shoulder Plate.The Riser Plate features an integrated ARCA dovetail, enabling quick transitions between setups that utilize our ARCA plates. Two front-facing 15mm LWS Rod Mounts allow for connecting accessories, and individual tie-down points for rods ensure a secure connection.The plate attaches to the camera body via two 3/8”-16 screws, setting it at its optical center for bridge plates and proper alignment of lens accessories. This plate also provides access to the front-facing knob and switch on the camera. Additionally, a rear ¼”-20 screw mounting point is designed to secure our D-Box™ to the Riser, preventing accidental discharge.SpecificationsWeight: 548.8 gDimensions: 199.8 x 248.5 x 22.1 mmIncludesA00233 ARCA Base PlateA00901 Riser Plate for FUJIFILM GFX ETERNA 55