Wooden Camera Fujifilm X-H2S Camera CageSKU: A00053 Fujifilm X-H2S Cage is a feature-rich camera cage designed exclusively for the Fujifilm X-H2S camera. This is a full wrap around, one-piece cage. The custom design offers added support and stability while providing an array of industry-standard 1/4"-20 and 3/8"-16 mounting points along the top and side of the cage. All mounting points feature a Wooden Camera standard locating hole pattern which is compatible with ARRI standard locating pin accessories. The lower Arca-Swiss Wedge found on the Arca-Swiss Dovetail can be removed and attached directly to the bottom of the cage parallel to the bottom of the camera - an orientation most commonly used in photography. The cage also features a detachable cable clamp, engraved markings to indicate the camera’s focal plane, location tabs to make sure the camera is square to the cage, and a hot shoe clamp for securing the camera into the cage. Features Location TabsFocal Plane MarkingsFull Wrap-Around Cage1/4"-20 and 3/8"-16 Mounting Points with ARRI-Standard Location Pins Specifications Weight: 219gDimensions: 110 x 160.5 x 71.2 mm
Wooden Camera Full Accessory Plate SystemSKU: A00473 Customize your rig with Wooden Camera’s Full Accessory Plate Kit, bundling multiple sizes of cheese and hook and loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR, Accessory Cube, WC Battery Plates, and more to any camera rig using the variable options in this kit including the 3/8-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Full Accessory Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each Full Accessory Kit contains two versions of four plates, a cheese plate as well as a hook and loop plate in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Included Items Bolt-On Accessory Rail ClampUniversal Dual Rod Clamp for Bolt-On AccessoriesUniversal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female)28mm Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female)Mini Accessory Rail Kit with Safety (100 mm)Mini Accessory Rail Kit with Safety (60 mm)Mini Accessory Rail Kit with Safety (40 mm)Accessory Plate (12,70 cm x 12,70 cm)Accessory Plate (7,62 cm x 12,70 cm)Accessory Plate (5,08 cm x 12,70 cm)Accessory Plate (5,08 cm x 5,08 cm)Hook and Loop Plate (5,08 cm x 5,08 cm)Hook and Loop Plate (5,08 cm x 12,70 cm)Hook and Loop Plate (7,62 cm x 12,70 cm)Hook and Loop Plate (12,70 cm x 12,70 cm)
Wooden Camera Handgrip (Left) SKU: 219400 Wooden Camera Handgrip (Left) is an ergonomic wooden handgrip, carved from a solid piece of Sapele wood which is similar to Mahogany. Wooden Camera Handgrip (Left) attaches by ARRI standard rosette and M6 threaded thumbscrew. It is possible to add start/stop trigger by purchasing the Trigger Box. Right hand version is also available! For attaching directly to rods, consider the 15mm Rod Clamp to ARRI Rosette and 19mm Rod Clamp to ARRI Rosette. Other useful items include the Rosette Arm and Rosette Arm (Short) which position the handgrip further out in front of you and the Rosette Spacer Standoff (Small) and (Large) for spacing grips off the camera body. Weight 272.1 gDimensions 76.2 mm x 101.6 mm x 127 mm
Wooden Camera Handgrip (Right) SKU: 219300 Wooden Camera Handgrip (Right) is an ergonomic wooden handgrip, carved from a solid piece of Sapele wood which is similar to Mahogany. Wooden Camera Handgrip (Right) attaches by ARRI standard rosette and M6 threaded thumbscrew. It is possible to add start/stop trigger by purchasing the Trigger Box. Left hand version is also available! For attaching directly to rods, consider the 15mm Rod Clamp to ARRI Rosette and 19mm Rod Clamp to ARRI Rosette. Other useful items include the Rosette Arm and Rosette Arm (Short) which position the handgrip further out in front of you and the Rosette Spacer Standoff (Small) and (Large) for spacing grips off the camera body. Weight 272.1 gDimensions 76.2 mm x 101.6 mm x 127 mm
Wooden Camera Handgrip Trigger Box SKU: 219500 Wooden Camera Handgrip Trigger Box attaches to the Wooden Handgrip (Right) and Wooden Camera Handgrip (Left) to add start/stop functionality for LANC and ARRI 3 pin Fischer compatible cameras. The Wooden Camera Handgrip Trigger Box works with both the Left and the Right grip. Simply remove the captured M3 screws and insert them from the opposite side. Coiled LANC Cable (12") and Coiled 3pin Fischer Cable (20") included. No power is required for operation. Weight 453.5 gDimensions 101.6 mm x 101.6 mm x 152.4 mm
Wooden Camera Handle Adaptor Kit for CCH-5 SKU: A00419 A 15mm Rod Bracket and Adaptor Plate that allows you to attach the ARRI CCH-5 handle to the Wooden Camera Top Plate. Weight: 121 gDimensions: 65 x 117 x 43.5 mm Included Items 1 x Front Rod Bracket for ALEXA 35 (CCH-5)1 x Rear Adaptor Plate - CCH-5
Wooden Camera Hook and Loop Plate System SKU: A00435 Customize your rig with Wooden Camera’s Hook and Loop Plate System, bundling multiple sizes of Hook and Loop plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR, Timecode Box, and Wireless Video TX to any camera rig using the variable options in this kit including the 3/8-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Hook and Loop Plate System provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Each System contains four Hook and Loop plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Included Items Bolt-On Accessory Rail ClampUniversal Dual Rod Clamp for Bolt-On AccessoriesUniversal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female)28mm Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female)Hook and Loop Plate (5,08 cm x 5,08 cm)Hook and Loop Plate (5,08 cm x 12,70 cm)Hook and Loop Plate (7,62 cm x 12,70 cm)Hook and Loop Plate (12,70 cm x 12,70 cm)
Wooden Camera Hook and Loop Plates Customize your rig with Wooden Camera’s Hook and Loop Plate. Securely mount items like your Teradek Bolt 6 TX to the larger plates while the Teradek RT MDR’s can mount to smaller plates on any camera rig. Available multiple mounting options include the Mini Rail Accessory Kit or the Bolt-On Mount System. Either mounting option optimizes the placement of these plates on your rig and offers maximum stability. In addition to providing the maximum customization to your rig, our Hook and Loop Plates provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Hook and Loop Plates are available in 5in x 5in, 3in x 5in, 2in x 5in, 2in x 2in sizes. The threading size for the Accessory rail attachments is M2.5. Specifications Hook and Loop Plate (5 In x 5 In): 117 g / 127 x 127 x 6.5 mmHook and Loop Plate (3 In x 5 In): 80.6 g / 127 x 77 x 6.5 mmHook and Loop Plate (2 In x 5 In): 62.5 g / 127 x 51 x 6.5 mmHook and Loop Plate (2 In x 2 In): 27 g / 51 x 51 x 6.5 mm
Wooden Camera Hook and Loop Plates Customize your rig with Wooden Camera’s Hook and Loop Plate. Securely mount items like your Teradek Bolt 6 TX to the larger plates while the Teradek RT MDR’s can mount to smaller plates on any camera rig. Available multiple mounting options include the Mini Rail Accessory Kit or the Bolt-On Mount System. Either mounting option optimizes the placement of these plates on your rig and offers maximum stability. In addition to providing the maximum customization to your rig, our Hook and Loop Plates provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Hook and Loop Plates are available in 5in x 5in, 3in x 5in, 2in x 5in, 2in x 2in sizes. The threading size for the Accessory rail attachments is M2.5. Specifications Hook and Loop Plate (5 In x 5 In): 117 g / 127 x 127 x 6.5 mmHook and Loop Plate (3 In x 5 In): 80.6 g / 127 x 77 x 6.5 mmHook and Loop Plate (2 In x 5 In): 62.5 g / 127 x 51 x 6.5 mmHook and Loop Plate (2 In x 2 In): 27 g / 51 x 51 x 6.5 mm
Wooden Camera Hook and Loop Plates Customize your rig with Wooden Camera’s Hook and Loop Plate. Securely mount items like your Teradek Bolt 6 TX to the larger plates while the Teradek RT MDR’s can mount to smaller plates on any camera rig. Available multiple mounting options include the Mini Rail Accessory Kit or the Bolt-On Mount System. Either mounting option optimizes the placement of these plates on your rig and offers maximum stability. In addition to providing the maximum customization to your rig, our Hook and Loop Plates provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Hook and Loop Plates are available in 5in x 5in, 3in x 5in, 2in x 5in, 2in x 2in sizes. The threading size for the Accessory rail attachments is M2.5. Specifications Hook and Loop Plate (5 In x 5 In): 117 g / 127 x 127 x 6.5 mmHook and Loop Plate (3 In x 5 In): 80.6 g / 127 x 77 x 6.5 mmHook and Loop Plate (2 In x 5 In): 62.5 g / 127 x 51 x 6.5 mmHook and Loop Plate (2 In x 2 In): 27 g / 51 x 51 x 6.5 mm
Wooden Camera Hook and Loop Plates Customize your rig with Wooden Camera’s Hook and Loop Plate. Securely mount items like your Teradek Bolt 6 TX to the larger plates while the Teradek RT MDR’s can mount to smaller plates on any camera rig. Available multiple mounting options include the Mini Rail Accessory Kit or the Bolt-On Mount System. Either mounting option optimizes the placement of these plates on your rig and offers maximum stability. In addition to providing the maximum customization to your rig, our Hook and Loop Plates provides a sleek and unobtrusive design featuring a black anodized aluminum finish. Hook and Loop Plates are available in 5in x 5in, 3in x 5in, 2in x 5in, 2in x 2in sizes. The threading size for the Accessory rail attachments is M2.5. Specifications Hook and Loop Plate (5 In x 5 In): 117 g / 127 x 127 x 6.5 mmHook and Loop Plate (3 In x 5 In): 80.6 g / 127 x 77 x 6.5 mmHook and Loop Plate (2 In x 5 In): 62.5 g / 127 x 51 x 6.5 mmHook and Loop Plate (2 In x 2 In): 27 g / 51 x 51 x 6.5 mm
Wooden Camera Hot Shoe Camera Handle SKU: 222000 Hot Shoe Camera Handle attaches to any camera's shoe mount for secure camera carrying. Knob under the handle allows for installation and removal without tools. For long term attachment, an allen wrench is included for applying additional torque. Accessories can be attached using the arrays of 1/4-20 and 3/8-16 holes in standard spacing and the ARRI standard accessory mount. Shoe mounts are found on front, top, and back for attaching on cameras lights and microphones. A 15mm side rod opening is available for attaching the UVF Mount v2. The Wooden Camera Hot Shoe Camera Handle works great for DSLRs, Canon HF G30, HF G40, and other handycams. Weight 181.4 gDimensions 50.8 mm x 101.6 mm x 177.8 mm
Wooden Camera Left Side Bracket (Alexa 35) SKU: A00357 Wooden Camera Left Side Bracket (Alexa 35) is a side Rail that mounts to the left side of the sensor body, featuring a DLC-coated stainless steel rosette, a forward-facing 3/8”-16 mounting point, 2 x 3/8”-16 and 2 x 1/4”-20 mounting points, a sensor-plane mark, and a swing-out tape hook. Dimensions: 38 mm x 15 mm x 122 mmWeight: 74.3 g
Left Side Rail (Sony BURANO) SKU: A00532 The Left Side Rail gives users mounting points on the left side of the Sony BURANO as well as Sensor Plane markings. This rail offers four 3/8”-16 and three 1/4”-20, anti-twist mounting points on the side as well as a front facing 3/8”-16 mounting point where you can add accessories like Bolt-On Rods for lens motors or additional universal accessories. These item attach to the Top Plate and ARCA Base Plate (Sony BURANO) via 1/4”-20 screws. Included Items:3/16” Hex KeyWeight: 84.37 gDimensions: 49 x 22 x 168 mm
Wooden Camera Lens Mount Support for Canon RF Mount to ARRI LPL Mount (RED V-Raptor) SKU: A00017 Lens Mount Support for Canon RF Mount to ARRI LPL Mount (RED V-Raptor) is a lens mount adapter support bracket designed for the Canon RF Mount to ARRI LPL Mount Adapter, offering support when used on a RED V-Raptor camera. The lens mount support bracket attaches directly to the faceplate of the camera via two captive 1/4-20 screws to distribute the strain from the lens mount to the camera body, allowing for a more secure and stable connection. Weight: 37g Dimensions: 61 mm x 23 mm x 16 mm
Wooden Camera Lens Mount Support for Canon RF to PL Mount Adapter (RED V-Raptor) SKU: A00018 Lens Mount Support for Canon RF to PL Mount Adapter (RED V-Raptor) is a lens mount adapter support bracket designed for the Canon RF to PL Mount Adapter (Pro), offering support when used on a RED V-Raptor camera. The lens mount support bracket attaches directly to the faceplate of the camera via two captive 1/4-20 screws to distribute the strain from the lens mount to the camera body, allowing for a more secure and stable connection. Weight: 37gDimensions: 61 mm x 23 mm x 16 mm
Wooden Camera Lens Mount Support for Canon RF to PL Mount Adapter Pro (RED V-Raptor) SKU: A00019 Lens Mount Support for Canon RF to PL Mount Adapter Pro (RED V-Raptor) is a lens mount adapter support bracket designed for the Canon RF to PL Mount Pro (RED Komodo), offering support when used on a RED V-Raptor camera. The lens mount support bracket attaches directly to the faceplate of the camera via two captive 1/4-20 screws to distribute the strain from the lens mount to the camera body, allowing for a more secure and stable connection. Weight: 37gDimensions: 61 mm x 23 mm x 16 mm
Wooden Camera LW 15mm Adapter (15mm Studio) SKU: 168500 The LW 15mm Adapter (15mm Studio) includes the LW 15mm Adapter and Rod Clamp (15mm Studio) and adapts 15mm lightweight accessories to 15mm studio spaced rods. The Adapter is height adjustable so LW 15mm matteboxes with no height adjustment can be vertically aligned if necessary. The 15mm posts on the adapter have 1/4-20 threaded holes for adding Bolt On 15mm Rods if longer mounting area is needed. The LW 15mm Adapter works great with the O'Connor O-Box & O'Focus, ARRI MMB-1, MMB-2, MFF-1, MFF-2, Redrock Mattebox & Follow Focus, and many more. LW 15mm Adapter Features Rod Clamp for attaching to 15mm studio rods15mm Rod Posts for attaching LW 15mm accessoriesHeight adjustmentThreaded holes for attaching 15mm extensionsIncludes 3 x 1/4-20 x 1/2 button head screws
Wooden Camera LW 15mm Adapter (19mm) SKU: 168600 The LW 15mm Adapter (19mm) includes the LW 15mm Adapter and Rod Clamp (19mm Studio) and adapts 15mm lightweight accessories to 19mm studio spaced rods. The Adapter is height adjustable so LW 15mm matteboxes with no height adjustment can be vertically aligned if necessary. The 15mm posts on the adapter have 1/4-20 threaded holes for adding Bolt On 15mm Rods if longer mounting area is needed. The LW 15mm Adapter works great with the O'Connor O-Box & O'Focus, ARRI MMB-1, MMB-2, MFF-1, MFF-2, Redrock Mattebox & Follow Focus, and many more. Rod Clamp for attaching to 19mm studio rods15mm Rod Posts for attaching LW 15mm accessoriesHeight adjustmentThreaded holes for attaching 15mm extensionsIncludes 3 x 1/4-20 x 3/8 button head screws
Wooden Camera LW 15mm BaseplateSKU: A40021LW 15mm Baseplate (Sony FX3, FX30, Fujifilm GFX100S, X-H2S, X-H2) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height. 15mm rods pass through front to back and have two locking thumb screws per side. The baseplate quick releases in two ways, giving the user the option to take the 15mm lightweight rods or to leave them behind.Baseplate features an updated ARCA safety system, as well as an updated ARRI standard safety dovetail system, a vertical lens support post system, and two standard 15mm LW rod clamps.Baseplate features an updated upper ARCA Swiss standard dovetail with two 3/8”-16 screws for attaching to the bottom of the camera. Updated for safety, the upper ARCA Swiss standard dovetail slides into the LW 15mm Baseplate core, and includes a safety release button for removal. Engraved arrows assist installing the dovetail in the correct direction.Weight: 348gDimensions: 50x118x90 mm
Wooden Camera LW 15mm Bracket (RED DSMC2) SKU: 213800 Combine Wooden Camera LW 15mm Bracket with Easy Riser Weapon for lightweight 15mm rods on RED Weapon at the correct lens height. Includes 2 x 1/4-20 x captured screws
Wooden Camera Micro Touch and Go System SKU: 276700 Micro Touch and Go System is an industry standard, quick release system compatible with Sachtler FSB 10T, 8T, FSB 6T, and Touch and Go Plate S. Our version is lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 1/4-20 and 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time. Our Touch and Go System is compatible with Sachtler FSB 10TSachtler 8TSachtler FSB 6TSachtler Touch and Go Plate S Complete System Weight: 221 gDimensions: 119.93 mm x 57 mm x 16.6 mm Touch and Go Plate Only Weight: 35 gDimensions: 57.15 mm x 47.5 mm x 6.35 mm Touch and Go Receiver Only Weight: 186 g Dimensions: 119.93 mm x 57 mm x 16.6 mm
Wooden Camera Mini Accessory Rail Kit SKU: A00437 Customize your Accessory Plate setup with three movable Mini Accessory Rails. Compatible with the Bolt-On Accessory Rail clamp and Universal Accessory Hinge and Clamp, these Mini Accessory Rails include captured low profile screws with press ball plungers for extra security on the Accessory Plates when sliding into position. In addition to providing the maximum customization to your rig, our Mini Accessory Rail Kit provides a sleek and unobtrusive design featuring a matte black finish. Included Items Mini Accessory Rail Kit with Safety (100 mm)Mini Accessory Rail Kit with Safety (60 mm)Mini Accessory Rail Kit with Safety (40 mm)
Wooden Camera Mini Touch and Go System SKU: 274000 Mini Touch and Go System is an industry standard, quick release system compatible with OConnor 80mm, Sachtler, and Ronford Baker. Wooden Camera Mini Touch and Go System is lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 1/4-20 and 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time. Touch and Go System is compatible with: 80mm O'Connor EuroSachtler 16Ronford Baker Mini-RBQ Complete System:Weight: 305g Dimensions: 139.7 x 76.2 x 16 mm Touch and Go Plate Only:Weight: 53gDimensions: 79.5 x 63.5 x 6.35 mm Touch and Go Receiver Only:Weight: 252g Dimensions: 139.7 x 76.2 x 16 mm