Wooden Camera Rosette Bracket SKU: 163400 Wooden Camera Rosette Bracket provides ARRI standard rosettes for attaching handles, extension arms, and 3rd party ARRI rosette accessories. Bracket can clamp directly to 15mm lightweight rods or can be attached to the front of Quick Base (BMC), Quick Cage (BMC)+LW, Quick Base (C100, C300, C500), Quick Base (FS700), Quick Base (F55, F5), Quick Base (Phantom Miro), Quick Base (Ikonoskop), Fixed Base (C100, C300, C500), and Fixed Base (F55, F5). 1/4-20 holes for attaching accessories to topPass-through holes to attach to baseplate systemsThumbscrew to clamp onto 15mm rodsIncludes: 2 x 1/4-20 x 1 socket cap screws
Wooden Camera Rosette Handgrip (135mm)SKU: A00995This Rosette Handgrip is constructed from a compound TPE material and features a large padded design by ODI, providing all-day comfort and long-lasting durability. This Handgrip has stainless steel knobs that are coated with DLC for resistance to wear and tear. Each knob features finger grooves for easy manual tightening.Additionally, the knob has a hole in the center for a 3/16” or 4mm hex tool for extra tightening if needed. We realize camera operators usually have their own preferences in grips, so each grip can be removed and exchanged for any 3rd party grip that is at least 135mm in length.SpecificationsWeight: 205.5gDimensions: 179.9 x 34 x 43 mm
Wooden Camera Rosette Handle (Brown Leather) SKU: 150800 Brown leather handle with ARRI style rosette and thumbscrew. Can attach to Bolt on Rosette (ARRI), Crossbar, Rosette Arm, or existing ARRI equipment. Attaches directly to AJA CION, Sony FS7, Blackmagic URSA (using Blackmagic's rosette baseplate), ARRI Alexa, and ARRI Amira (using ARRI's Amira baseplate). Includes 1 x M6 nylon spacer Weight 271 gDimensions 184.2 mm x 56 mm x 48.2 mm
Wooden Camera Rosette Handle Rubber SKU: 150900 Rubber grip handle with ARRI style rosette and thumbscrew. Can attach to Bolt on Rosette (ARRI), Crossbar, Rosette Arm, or existing ARRI equipment. Attaches directly to AJA CION, Sony FS7, Blackmagic URSA (using Blackmagic's rosette baseplate), ARRI Alexa, and ARRI Amira (using ARRI's Amira baseplate). Includes 1 x M6 nylon spacer Weight 271 gDimensions 184.2 mm x 56 mm x 48.2 mm
Wooden Camera Rosette Handle Kit (Brown Leather) SKU: 170900 Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of your body for easy camera control. Perfect for quick, lightweight shoulder mounted configurations. Threaded holes on Arms and Handles allow for attachment of LCD monitors and other accessories. Wooden Camera Rosette Handle Kit (Brown Leather) Includes 1 x Rosette Bracket2 x Rosette Handle (Brown Leather)2 x Rosette Arm
Wooden Camera Rosette Handle Kit Rubber SKU: 171000 Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of your body for easy camera control. Perfect for quick, lightweight shoulder mounted configurations. Threaded holes on Arms and Handles allow for attachment of LCD monitors and other accessories. Includes 1 x Rosette Bracket2 x Rosette Handle (Rubber)2 x Rosette Arm Specifications Weight 1089 gDimensions 152.40 mm x 101.60 mm x 279.40 mm
Wooden Camera Rosette Side Plate (URSA Mini, URSA Mini Pro) SKU: 229600 Rosette Side Plate (URSA Mini) attaches to the right side of the Blackmagic URSA Mini Camera by the ARRI rosette to add additional 1/4-20 and 3/8-16 mounting points. An ARRI standard rosette is available for attaching the handgrip or extension arm. ARRI accessory mount also available in several places (3/8-16 screw hole with locating pins adjacent).
Wooden Camera Safety Dovetail (12") SKU: 151200 12" ARRI standard dovetail with safety catch on one end to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. Attach to Shoulder Pad for custom handheld configurations Perfect for Manfrotto, Miller, Cartoni, and more. Weight 0.41 kgDimensions 30.48 cm x 7.37 cm x 15.24 cm
Wooden Camera Safety NATO Rail 150mm SKU: 151500 Wooden Camera Safety NATO Rail, 150mm long, quick release rail attaches to any two 1/4-20 holes up to 72mm apart center to center and provides a mount for NATO Handles and NATO Clamps. Spring loaded pins on each end to prevent accidental accessory removal. Compatible RED and third party NATO style accessories. Includes 2 x 1/4-20 x 3/8" screwsWeight 0.05 kgDimensions 9.91 cm x .20.32 cm x .15.24 cm
Wooden Camera Safety NATO Rail 70mm SKU: 151300 NATO standard, 70mm long, quick release rail attaches to any two 1/4-20 holes up to 42mm apart center to center and provides a mount for NATO Handles and NATO Clamps. Spring loaded pins on each end to prevent accidental accessory removal. Wooden Camera Safety NATO Rail compatible RED and third party NATO style accessories. Includes 2 x 1/4-20 x 3/8" screwsWeight 0.05 kgDimensions 7.11 cm x .20.32 cm x .15.24 cm
Wooden Camera Shoe Handle Mount SKU: 161300 Shoe Handle Mount for original Canon C100, C300, C500 handles and LCD Monitors. 1/4-20 threaded hole at center. Attaches to two holes up to 18mm apart lengthwise and two holes between 33mm and 36mm widthwise. Also great for mounting on-camera lights, microphone shock mounts, flashes, and more. Works great with Top Plate (C100, C300, C500). Includes 2 x 1/4-20 x 3/8" screwWeight 0.09 kgDimensions 7.62 cm x 10.16 cm
Shoulder Plate ARCASKU: A00341The Shoulder Plate ARCA was made to allow users to quickly swap from studio to handheld setups when using the ARCA Base Plate. This Shoulder Plate is easy to unscrew and slides off the ARCA Base Plate in seconds with one press of the safety release. Users can adjust the plate on the ARCA Base Plate for optimal shoulder pad position.Specifications: 214 g | 180 x 110.5 x 16 mm
Wooden Camera Shoulder RigSKU: 50-K10053The Shoulder Rig is ergonomically designed for comfortable, extended use, minimizing fatigue and maximizing efficiency. The flat shoulder pad allows you to adjust the balance of the build on your shoulder, allowing you to easily shift the weight to the optimal position. Its modularity allows extensive customization for various shooting scenarios and accessory integration. The intuitive design ensures ease of use and streamlining workflows. The kit includes a Safety Dovetail, Crossbar, ARCA Shoulder Plate, Shoulder Pad, 6” Extensions, Rosette Handgrips, and Color Rings. All components are made from 7075 Aluminum for maximum strength in tough shooting conditions.Included Items12in Safety Dovetail2 x 6” Extension x22 x Rosette Handgrip (135mm)Shoulder Plate - ARCAShoulder PadElite Handheld Accessories Color Ring PackSpecificationsWeight: 1891 gDimensions: 806.9 x 216.5 x 47.5 mm
Wooden Camera Side Rail for FUJIFILM GFX ETERNA 55SKU: A00914The Side Rail is a versatile mounting solution for camera accessories. It attaches securely to both the top and riser plate using 1/4”-20 screws, which can be tightened with a 3/16” hex tool. This rail provides multiple mounting points for your accessories, including both 1/4”-20 and 3/8”-16 threaded holes, ensuring compatibility with a wide range of NATO-compatible accessories. Its symmetrical design allows for use on either the left or right side of your camera setup, providing flexibility in your rig configuration.The NATO Rail incorporates enhanced safety features to protect both your accessories and your camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory. Additionally, blind holes prevent accidental damage to your camera body during installation or use. This Side Rail incorporates a Wooden Camera patented line of products, featuring their innovative dual safety NATO design for added security and peace of mind. SpecificationsWeight: 75.3 gDimensions: 158.7 x 28.5 x 27.4 mm
Wooden Camera Side Rail Kit for FUJIFILM GFX ETERNA 55SKU: 50-K10004Our Side Rail Kit attaches securely to both the Side and Rear Top Plate as well as the Riser Plate. It creates a secure camera base with extra mounting points on the sides allowing users to customize their camera setup with accessories. The rail incorporates enhanced safety features to protect both accessories and the camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory.Additionally, blind holes are strategically placed to prevent accidental damage to your camera body during installation or use with 1/4”-20 or 3/8”-16 mounted accessories. These Side Rails incorporate a Wooden Camera patented line of products, featuring their innovative dual safety NATO design for added security and peace of mind.SpecificationsWeight: 150.6 gDimensions: 158.7 x 57 x 27.4 mmIncludesA00914 Side Rail for FUJIFILM GFX ETERNA 55 2x
Wooden Camera Side Rail System (ALEXA 35) SKU: A00417 A set of two Side Rails that mount to the sides of the sensor body, each featuring a DLC-coated stainless steel rosette, a forward-facing 3/8”-16 mounting point, 2 x 3/8”-16 and 2 x 1/4”-20 mounting points, a sensor-plane mark, and a swing-out tape hook. Weight: 147.5 gDimensions: 36 mm x 30 mm x 122 mm Included Items 1 x Left Side Bracket (ALEXA 35)1 x Right Side Bracket (ALEXA 35)
Wooden Camera Side Rails (RED KOMODO, KOMODO-X)SKU: A00549Add 3/8”-16 and 1/4”-20 mounting points on the sides of your build by attaching these sleek, lightweight Side Rails. These rails give users the flexibility to mount accessories like Bolt-On Rods for lens motors and 25mm Bolt-On Rosettes on either side of the camera. Can be used as a stand-alone accessory or in addition to the Rear Cage and Top Cheese Plate to give users a complete Cage System, these side rails were made to give KOMODO and KOMODO-X users much-needed real estate for adding accessories. The side rails are designed to be compatible with the Adapter Support Brackets for RED’s KOMODO RF to PL lens mount with their forward facing M4 holes. For KOMODO: Left side Rail does cover up the audio ports Microphone and Headphones.Included ItemsSide Rail - Left - RED KOMODO, KOMODO-XSide Rail - Right - RED KOMODO, KOMODO-XSpecificationsWeight: 95 gDimensions: 53 x 33 x 97 mm
Wooden Camera Side Top Plate Extension for FUJIFILM GFX ETERNA 55SKU: A00969The Side Top Plate Extension mounts to the top of the camera via two 3/8”-16 screws, providing a secure base for additional accessories without covering the camera’s top dovetail. The Side Plate adds 1/4”-20 and 3/8”-16 mounting points along the top of the camera and a forward-facing mounting point that can be used with accessories like the Bolt-On Rods or the Dual Rod Clamp.Etching near the forward screw indicates the camera's film plane. While the Side Plate is installed, users can use the native top handle by sliding it along its channel on the camera, even with the plate installed. Blind holes are incorporated to prevent damage to the camera.This item is also compatible with the Rear and Front Top Plates for the FUJIFILM GFX ETERNA 55.SpecificationsWeight: 106.6 gDimensions: 152.7 x 32.5 x 18.8 mm
Wooden Camera Solid Baseplate (Sony Venice, Venice 2, F55, F5)SKU: 258900 Solid Baseplate (Sony Venice, Venice 2, F55, F5) is a fixed baseplate that provides pass-through lightweight 15mm rod support at the correct lens height along with ARRI standard rosettes on each side. The baseplate is also the correct thickness to bring the camera up to the correct lens height on ARRI standard bridge plates like our Unified Bridgeplate (19mm) and (15mm Studio). Weight: 410gDimensions: 119.38 x 119.38 x 31.75 mm
Wooden Camera Sony FX6 Unified Accessory Kit (Base) SKU: 283600 Sony FX6 Unified Accessory Kit (Base) is a professional camera support package designed for the Sony FX6 camera and utilizes the Wooden Camera Unified Baseplate System. The FX6 accessory package includes: Top Plate (Sony FX6), a top mounting camera cheeseplate for accessory attachment, Unified Baseplate (Sony FX6), a quick release, camera baseplate for holding the two 15mm Rod (12") at the correct lens height. Included Items 1 x Top Plate (Sony FX6) 1 x Unified Baseplate (Sony FX6) 2 x 15mm Rod (12")
Wooden Camera Steadicam Plate ARCA SKU: A00391 A Steadicam adaptor plate with 17x 3/8”-16 and 17 1/4”-20 mounting points for fine-tuning balance. Weight: 325 gDimensions: 180 mm x 109 mm x 21 mm
Wooden Camera Studio Handgrip KitAvailable in three configurations—19mm Studio, 15mm Studio, and 15mm LWS—these rod based handgrip kits are built for strength, comfort, and speed on set. Each kit includes a crossbar, two 6” extensions, a pair of ODI BMX-style handgrips, stainless steel DLC-coated knobs, and eight color rings for camera ID customization.All components are machined from 7075 aluminum, offering exceptional durability for demanding production environments. The crossbar in each version is designed to stay mounted to the rods even when the camera is attached to an ARRI-standard dovetail, allowing seamless transitions between handheld and tripod setups. Both the 19mm and 15mm Studio versions include cut-outs for 15mm LWS compatibility, while all three feature 32mm pivoting rosettes to allow for comfortable handgrip positioning.The 6” extensions use a unique pentagonal design that ensures strength under stress while keeping the build lightweight. A built-in 5-degree offset enables the full rig to fold down for easier storage. Each extension also includes standard ¼”-20 and ⅜”-16 mounting points for attaching accessories like monitors, as well as 32mm rosettes compatible with M6 hardware.The included ODI BMX-style handgrips are made from a compound TPE material and feature a large padded design for all-day comfort and long-term durability. The stainless steel knobs have finger grooves for quick adjustments and center holes for a 3/16” or 4mm hex tool when extra torque is needed. =To help identify camera builds quickly, eight color rings (red, blue, green, and yellow—two of each) are included in every kit.Choose your configuration from19mm Studio Handgrip Kit15mm Studio Handgrip Kit15mm LWS Handgrip KitIncluded Items2 x 6” Extension 2 x Rosette Handgrip (135mm)Crossbar : 19mm Studio / 15mm Studio / 15mm LWSElite Handheld Accessories Color Ring PackSpecifications15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm LWS Handgrip Kit:Weight: 1102g | Dimensions:216.1 x 235 x 42.9 mm
Wooden Camera Studio Handgrip KitAvailable in three configurations—19mm Studio, 15mm Studio, and 15mm LWS—these rod based handgrip kits are built for strength, comfort, and speed on set. Each kit includes a crossbar, two 6” extensions, a pair of ODI BMX-style handgrips, stainless steel DLC-coated knobs, and eight color rings for camera ID customization.All components are machined from 7075 aluminum, offering exceptional durability for demanding production environments. The crossbar in each version is designed to stay mounted to the rods even when the camera is attached to an ARRI-standard dovetail, allowing seamless transitions between handheld and tripod setups. Both the 19mm and 15mm Studio versions include cut-outs for 15mm LWS compatibility, while all three feature 32mm pivoting rosettes to allow for comfortable handgrip positioning.The 6” extensions use a unique pentagonal design that ensures strength under stress while keeping the build lightweight. A built-in 5-degree offset enables the full rig to fold down for easier storage. Each extension also includes standard ¼”-20 and ⅜”-16 mounting points for attaching accessories like monitors, as well as 32mm rosettes compatible with M6 hardware.The included ODI BMX-style handgrips are made from a compound TPE material and feature a large padded design for all-day comfort and long-term durability. The stainless steel knobs have finger grooves for quick adjustments and center holes for a 3/16” or 4mm hex tool when extra torque is needed. =To help identify camera builds quickly, eight color rings (red, blue, green, and yellow—two of each) are included in every kit.Choose your configuration from19mm Studio Handgrip Kit15mm Studio Handgrip Kit15mm LWS Handgrip KitIncluded Items2 x 6” Extension 2 x Rosette Handgrip (135mm)Crossbar : 19mm Studio / 15mm Studio / 15mm LWSElite Handheld Accessories Color Ring PackSpecifications15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm LWS Handgrip Kit:Weight: 1102g | Dimensions:216.1 x 235 x 42.9 mm
Wooden Camera Studio Handgrip KitAvailable in three configurations—19mm Studio, 15mm Studio, and 15mm LWS—these rod based handgrip kits are built for strength, comfort, and speed on set. Each kit includes a crossbar, two 6” extensions, a pair of ODI BMX-style handgrips, stainless steel DLC-coated knobs, and eight color rings for camera ID customization.All components are machined from 7075 aluminum, offering exceptional durability for demanding production environments. The crossbar in each version is designed to stay mounted to the rods even when the camera is attached to an ARRI-standard dovetail, allowing seamless transitions between handheld and tripod setups. Both the 19mm and 15mm Studio versions include cut-outs for 15mm LWS compatibility, while all three feature 32mm pivoting rosettes to allow for comfortable handgrip positioning.The 6” extensions use a unique pentagonal design that ensures strength under stress while keeping the build lightweight. A built-in 5-degree offset enables the full rig to fold down for easier storage. Each extension also includes standard ¼”-20 and ⅜”-16 mounting points for attaching accessories like monitors, as well as 32mm rosettes compatible with M6 hardware.The included ODI BMX-style handgrips are made from a compound TPE material and feature a large padded design for all-day comfort and long-term durability. The stainless steel knobs have finger grooves for quick adjustments and center holes for a 3/16” or 4mm hex tool when extra torque is needed. =To help identify camera builds quickly, eight color rings (red, blue, green, and yellow—two of each) are included in every kit.Choose your configuration from19mm Studio Handgrip Kit15mm Studio Handgrip Kit15mm LWS Handgrip KitIncluded Items2 x 6” Extension 2 x Rosette Handgrip (135mm)Crossbar : 19mm Studio / 15mm Studio / 15mm LWSElite Handheld Accessories Color Ring PackSpecifications15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm LWS Handgrip Kit:Weight: 1102g | Dimensions:216.1 x 235 x 42.9 mm