Wooden Camera Tool-less LCD/EVF Adapter (Weapon/Scarlet-W/Raven) SKU: 233800 Tool-less LCD/EVF Adapter (Weapon/Scarlet-W/Raven) provides 26pin connection on top and bottom for turning the RED 4.7" Touchscreen into a tool-less monitor! It also works great with the DSMC2 RED EVF (OLED) when using RED's integrated mount. You can put the torx wrench away after you install this device. This can also be used as a riser for the LCD to add 15mm of height above the camera top.
Wooden Camera Top Handle Cheese Plate for Canon EOS C400SKU: A00778Ergonomically designed to conform to the native handle for maximum comfort, the Top Handle Cheese Plate attaches directly to the EOS C400 handle with a 3/16 and 3mm hex wrench and provides additional space for accessories via multiple 1/4”-20 and 3/8”-16 mounting points on the top and side. A forward-facing 3/8”-16 point lets you mount Rod Clamps, Bolt-On Rods, or other front-mounted accessories. The custom cutout design allows easy access to the EOS C400 hot shoe for mounting the camera’s shotgun microphone shock mount. Weight: 104.8 gDimensions: 190.4 x 44 x 37.2 mm
Wooden Camera Top Plate for Blackmagic URSA Cine 12K/17KSKU: A00829The Top Plate designed for the Blackmagic URSA Cine 12K/17K incorporates open ports emphasizing air flow and connectivity. This system securely mounts to the top of the camera using three 1/4”-20 screws down the center of the camera and adds multiple 1/4”-20 and 3/8”-16 mounting points across the top and sides of the plate. The rear mounting point on the Assistant’s Side of the camera allows for a mounting point to add the Top Plate Extension Block, while the front-facing 3/8”-16 mounting points allow users to add accessories like the Front Dual Rod Clamp to secure 15mm rods for accessories like EVF’s or lens motors. With the forward facing 3/8”-16 mounting points, users can add accessories like Bolt-On Rods or a Maxi Rod Light for lens motors. This Top Plate is compatible with the stock Blackmagic URSA handle.SpecificationsWeight: 412.8gDimensions: 160.6 x 135 x 56 mm
Wooden Camera Top Plate (Canon C500mkII) SKU: 274500 The Top Plate for Canon C500mkII camera has arrays of 1/4-20 holes in standard spacing and ARRI Accessory Mount in several places (3/8-16 threaded hole with locating pins adjacent). Included with the Wooden Camera Top Plate (Canon C500mkII) is a Canon LCD Bracket Adapter which allows you to reinstall the L bracket and LCD that comes with the camera. This piece can be attached to the front of the Top Plate or to the front of Wooden Camera handles like the NATO Handle Plus V2 and the Top Handle V2. If a longer handle option is desired, consider the Master Top Handle. Please note that while the Top Plate is in use, it is not recommended to attach the original Canon top handle. Top Plate (Canon C500mkII) is great for mounting our EVF Mounts, Handles, Ultra Arms, and more! Includes: 4x 1/4-20 Captured Screws Weight: 272.16 g Dimensions: 162.05 mm x 101.6 mm x 35.05 mm
Top Plate (Sony BURANO)SKU: A00531 The Top Plate securely mounts to the Sony BURANO using four 1/4”-20 screws and adds multiple 1/4”-20 and 3/8”-16 mounting points along the top and sides of the BURANO.This 2 plate design of this Top Plate ensures that it can be used in tandem with the SONY PWX-FX9 Top Handle by removing the inner insert and securing the handle directly to the camera. The Top Plate also has mounting locations for the stock BURANO carry handle.The Top Plate for Sony BURANO is compatible with the Front Dual Rod Clamp (Sony BURANO) and EVF System (Sony BURANO).Included Items: 3/16” Hex Key 3mm Hex KeyWeight: 535.24 gDimensions: 162 x 120 x 19 mm
Wooden Camera Top Plate (Sony FX6) SKU: 282900 Wooden Camera Top Plate (Sony FX6) is a top cheeseplate for the Sony FX6 that contours to the shape of the camera body. Arrays of 1/4-20 holes in standard spacing and 3/8-16 holes with ARRI accessory mounts are also available in several placesIncludes 4 x Screws (for attaching top plate directly to camera)
Wooden Camera Top Plate (Sony FX9) SKU: 275100 Top Plate (Sony FX9) is a top cheeseplate for the Sony FX9 that contours to the shape of the camera body. Arrays of 1/4-20 holes in standard spacing and multiple 3/8-16 holes with ARRI accessory mounts are also available in several places. Original Sony handle can be reinstalled by removing the center section of the top plate. Communication between the handle and the Sony body is possible by using just the U shaped portion of the top plate. The Sony XDCA-FX9 Extension Unit can also be attached to the rear of the camera without obstruction. Includes 4 x 1/4-20 x 1/2" screws (for attaching top plate directly to camera) 1 x M2 Philips screw (for relocating the Sony cable clamp onto the side of the top plate) Specifications Weight: 273g Dimensions: 193.8 mm x 101.6 mm x 28.7 mm
Wooden Camera Top Plate (Sony Rialto, Rialto 2) SKU: A00273 A simple and lightweight Top Plate for mounting Carry Handles and Rod Brackets. Weight: 106.5 g Dimensions: 50.8 mm x 103 mm x 13 mm
Wooden Camera Top Plate (Sony Venice, Venice 2)SKU: 257600 Top Plate (Sony Venice, Venice 2) is a top cheeseplate for the Sony Venice, Sony Venice 2 that contours to the shape of the camera body and leaves the USB port area open. Plate provides rows of 1/4-20 and 3/8-16 holes for attaching Handles, UVF Mount v2, Rod Clamps, and more. ARRI accessory mount also in several places (3/8-16 threaded hole with locating pins adjacent). Mounting holes available and marked for Master Top Handle and ARRI top handle (CCH-2). Features 1/4-20 holes - in standard spacing (9mm center to center)3/8-16 holes - in ARRI standard spacing (50mm center to center) Includes (4) 1/4-20 x 1/2 captured socket cap screws Specifications Weight: 230gDimensions: 177.8 x 101.6 x 12.7 mm
Wooden Camera Top Plate (URSA Mini, URSA Mini Pro) SKU: 216000 Top Plate (URSA Mini) is a top mounting cheese plate for Blackmagic URSA Mini Camera. Wooden Camera Top Plate attaches to camera top by (4) 1/4-20 screws. Arrays of 1/4-20 holes in standard 9mm spacing and multiple 3/8-16 holes for large accessories. ARRI accessory mount also available in several places (3/8-16 screw hole with locating pins adjacent). Includes tape hook for accurate focus measuring. Original Blackmagic handle can be reinstalled on the Top Plate using center 1/4-20 threaded holes. Includes 4 x 1/4-20 socket cap screws
Wooden Camera Top Plate 15mm Dual Rod Clamp SKU: A00197 Lens-centered 15mm Front Rod Clamps with individual tightening screws offer a mounting location for an EVF, lens control motors, or distance-measuring devices. Can be used with Rear Dual Rod Clamps for more stability and flexibility with longer rods. Weight: 74 gDimensions: 30.5 mm x 112.5 mm x 39.5 mm
Wooden Camera Top Plate for Canon EOS C80SKU: A00834The Top Plate for Canon EOS C80 features a 2-piece design to allow users to remove the section and use the hot shoe on the camera. This plate is securely mounted to the top of the camera using a 1/4”-20 screw and includes tie-down ridges for added stability. When you are not using the hot shoe, the second piece of the top plate securely attaches to the camera using a cold shoe. On the rear of the Top Plate is a mounting point to attach a Battery Slide Pro, ridges on this point add stability by preventing the plate from twisting.The design includes a cut-out to keep the tape hook in its original place, but if you would like to remove it, the design also includes mounting options for the tape hook on the left or right side of the plate. Across the Top Plate and along the sides, are an abundance of mounting points to attach accessories. The two 3/8”-16 mounting points are symmetrical on the front and back, allowing you to attach a Top Plate Dual Rod Clamp and mount 15mm rod-based accessories to the top plate.Weight: 233.1 gDimensions: 95.5 x 92 x 19.5 mm
Wooden Camera Top Plate for Sony FX3/FX30 SKU: A00343 A Cheese Plate that replaces the stock Sony carry handle and adds 2x 1/4”-20 and 1x 3/8”-16 accessory mounting points. Integrates with Wooden Camera Ultra Handle System and/or other accessories. Included Items: Right Angle Hex KeysWeight: 25.6gDimensions: 25 x 63.5 x 7.5 mm
Wooden Camera Top Plate Front (ALEXA 35) SKU: A00358 Ideal standalone Top Plate segment for a minimalist rig. Supports LCS-1 handle, Ultra Handle, rod brackets and EVF viewfinder. Weight: 143 g Dimensions: 64.5 mm x 122 mm x 13 mm
Wooden Camera Top Plate Middle (ALEXA 35) SKU: A00359 Expands the Front Top Plate, giving you extra mounting points and the ability to mount a CCH-5 handle and Dual Rod Bracket. Weight: 173 gDimensions: 107 mm x 122 mm x 13 mm
Wooden Camera Top Plate Rear (Alexa 35) SKU: A00409 Wooden Camera Top Plate Rear (Alexa 35) expands Front and Middle Top Plates for full functionality, adding side and top mounting points at the rear of the camera. Dimensions: 31.6 mm x 122 mm x 13 mmWeight: 58 g
Wooden Camera Top Plate System (ALEXA 35) SKU: A00418 The modular three-piece Top Plate reflects an open-system approach that allows for multiple configurations and total compatibility with Wooden Camera, ARRI, and third-party accessories. Customizable and adaptable, the bolt pattern allows for Rod Brackets and accessories to be mounted anywhere on top of the camera body. Comes with Front Top Plate, Dual Rod Clamp, and the Antenna Guard Color Kit. Weight: 522 gDimensions: 203 mm x 122 mm x 50 mm Included Items 1 x ALEXA 35 Front Top Plate1 x ALEXA 35 Middle Top Plate1 x ALEXA 35 Rear Top Plate1 x Top Plate Dual Rod Clamp - Front1 x Top Plate 15mm Upper Dual Rod Clamp1 x Antenna Guard Color Kit
Wooden Camera Top Plate System for Blackmagic URSA Cine 12K/17KSKU: K10038The Top Plate System designed for the Blackmagic URSA Cine 12K/17K incorporates open ports emphasizing airflow. It includes the Top Plate, Front Dual Rod Clamp, and Top Plate Extension Block. This system securely mounts to the top of the camera using three 1/4”-20 screws down the center of the camera and adds multiple 1/4”-20 and 3/8”-16 mounting points across the top and sides of the plate.With the front-facing 3/8”-16 mounting points, users can add the included Front Dual Rod Clamp to secure 15mm rods for accessories like EVF’s or lens motors. Forward-facing 3/8”-16 mounting points allow users to add accessories like Bolt-On Rods for lens motors. This Top Plate is compatible with the stock Blackmagic URSA handle.Included ItemsTop Plate Extension Block for Blackmagic URSA Cine 12K/17KTop Plate for Blackmagic URSA Cine 12K/17KTop Plate Dual Rod Clamp - FrontSpecificationsWeight: 675.9 gDimensions: 107 x 65 x 144 mm
Top Plate System for Canon EOS C400SKU: A00769This lightweight, adaptable, and modular, three-piece Top Plate System consists of a Center Plate, two Symmetrical Left/Right Plates, and a Top Plate Dual Rod Clamp - Front for rod-based mounting.The Center Top Plate attaches to the center mounting points on the camera body, allowing you to remove the EOS C400 top handle and add 3/8”-16 and 1/4”-20 mounting points for other accessories or handles like the Ultra Handle 5” Kit.The Symmetrical Left/Right Top Plates can be flipped and used on either side as additional mounting platforms for accessories like Teradek Bolt or the NATO Side Rail for EOS C400. Each component securely attaches to native EOS C400 mounting points with a 3/16 hex tool.SpecificationsWeight: 284.9 gDimensions: 121.5 x 169.4 x 19.2 mm
Wooden Camera Top Plate System for FUJIFILM GFX ETERNA 55SKU: K10007This versatile 3-part modular design allows users to optimize their camera rig by offering multiple configurations. This design includes a Side Plate, Front Plate, and Rear Plate – these can be used together in different configurations, depending on the needs of the shoot.Examples of different configurations: the Side Plate can be detached to provide clearance for the Power Strip, and the Rear Plate can be removed to use the native handle. This ensures that you can use our Top Plate System regardless of the accessories needed on your camera.The Top Plate System adds a multitude of 1/4”-20 and 3/8”-16 mounting points across the top of the camera. Using the forward-facing mounting points on the Side and Front of the plate, users can mount a wide array of accessories, such as Bolt-On rods or the Dual Rod clamp.To safeguard the camera from potential damage caused by overtightened or improperly installed accessories, the Top Plate System incorporates blind holes, preventing screws from being inserted too far. Four tie-down points can secure the Top Plate to the camera.IncludesA00970 Front Top Plate Extension for FUJIFILM GFX ETERNA 55A00969 Side Top Plate Extension for FUJIFILM GFX ETERNA 55A00971 Rear Top Plate Extension for FUJIFILM GFX ETERNA 55
Top Plate System for Sony BURANOSKU: A00602The Top Plate System for Sony BURANO includes the Top Plate, Front Dual Rod Clamp and Top Plate 15mm Upper Rod Clamp. This system securely mounts to the top of the camera using four 1/4”-20 screws and adds multiple 1/4”-20 and 3/8”-16 mounting points.With the front facing 3/8”-16 mounting points, users can add the included Front Dual Rod Clamp to secure rods with a Top Plate 15mm Upper Rod Clamp. Additionally, with the 3/8”-16 mounting point, users can add the EVF System directly to the Top Plate.The 2 plate design of this Top Plate ensures that it can be used in tandem with the SONY PWX-FX9 Top Handle by removing the inner insert and securing the handle directly to the camera. The Top Plate also has mounting locations for the stock BURANO carry handle.Weight: 703.1 gDimensions: 162 x 152 x 74 mmIncluded ItemsTop Plate (Sony BURANO)Front Dual Rod Clamp (Sony BURANO)Top Plate 15mm Upper Rod Clamp
Wooden Camera Touch and Go System (120mm Oconnor Euro, Sachtler 35, Ronford Baker RBQ Compatible)SKU: 256200Touch and Go System is an industry standard, quick release system compatible with OConnor 120mm, Sachtler, and Ronford Baker. Our version is up to 1/3 lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time.Touch and Go System is compatible with120mm O'Connor EuroSachtler 35Ronford Baker RBQSpecificationsComplete SystemWeight: 510gDimensions: 184.2 x 91.44 x 25.4 mmTouch and Go Plate OnlyWeight: 118gDimensions: 114.3 x 77.47 x 6.6 mmTouch and Go Receiver OnlyWeight: 390gDimensions: 184.2 x 91.44 x 19.05 mm
Wooden Camera Trigger Handle (RED Weapon / Scarlet-W / Raven) SKU: 228000 Trigger Handle for RED Weapon, Scarlet Weapon, Raven cameras attaches without tools directly to the top of the camera brain or to the Easy Top (Weapon/Scarlet-W/Raven) to trigger the camera through the pogo interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (2) 1/4-20 captured thumbscrews. Additionally, Rod Clamps can be attached to the front for a pass through top rod system. Includes 2 x 1/4-20 x captured thumbscrews
Wooden Camera Ultra Arm Ball (Hot Shoe) SKU: 233000 Ultra Arm Ball (Hot Shoe) is a component of Wooden Camera Ultra Arm lineup which attaches to any camera hot shoe or accessory hot shoe mount and has a 25mm (1 inch) ball on the end. Ideal for use with DSLRs, Canon C-series cameras, Sony FS7/FS5, and many more. This can be combined with our Double Ball Clamp and other Ultra Arm accessories to build custom configurations! This component is also compatible with existing 3rd party 25mm ball mountsWeight: 45.3 g Dimensions: 25.4 mm x 50.8 mm x 25.4 mm