Wooden Camera Universal Offset Bracket SKU: 199700 Universal Offset Bracket attaches by an ARRI style accessory mount, 3/8-16 with locating pins adjacent. It can also attach by using two included 1/4-20 or 3/8-16 screws spaced up to 77mm (3 inches) apart center to center. Provides an ARRI style accessory mount spaced 100mm from the original mounting hole. Works great with Universal Hot Shoe and Microphone Shock Mount. Weight 65.2 g Dimensions 12.7 cm x 2.54 cm x 1.27 cm

Wooden Camera UVF Mount (NATO Jaws Only) SKU: 214600 Wooden Camera UVF Mount (NATO Jaws Only) is just the clamping NATO Jaws found on the complete UVF Mount (NATO Jaws) System. It is great for attaching EVFs like the SmallHD Sidefinder to an existing UVF kit. Weight: 90.7 gDimensions: 50.8 x 76.2 x 25.4 mm

Wooden Camera UVF Mount (Sony FX9, FS7, FS7mkII, Panasonic EVA1, No Clamp) SKU: 195800 UVF Mount (Sony FX9, FS7, FS7mkII, Panasonic EVA1, No Clamp) replaces the original Sony viewfinder mount system included with the Sony PXW-FS7, FS7mkII, FX9, or Panasonic EVA1 to provide a permanent level horizon to the camera. Three points of adjustment: 15mm Tube Clamp for tilt and distance to the camera, NATO thumbscrew (identified by red component) for positioning on NATO rail, and tension knuckle built into Sony EVF to adjust tilt. Tool-less design allows quick installation and removal of UVF v2 Sled. Safety pin prevents accidental removal. UVF v2 Sled can attach to any NATO-style rail. NATO Arm length approximately 5" however longer distance can be reached via the integrated 15mm rod that attaches the EVF. Weight: 282g Dimensions: 158.8 x 145.5 x 45.4 mm

Wooden Camera UVF Mount LCD (No Clamp) SKU: 180300 UVF Mount LCD (No Clamp) is a version of UVF Mount LCD Kit without the 15mm Tube Clamp portion. This kit works great with NATO Handle (Plus) which has an integrated 15mm clamp. The UVF Mount LCD Kit attaches larger LCD monitors to cameras while keeping the horizon level. Three points of adjustment: 15mm tube clamp for tilt and distance to the camera, NATO thumbscrew (identified by red component) for positioning on NATO rail, and tension thumbscrew to adjust tilt of LCD. Tool-less design allows quick installation and removal of LCD unit. Safety pin prevents accidental removal. UVF v2 Sled can also attach directly to any NATO-style rail. A small spacer piece is included for the LCDs with video connection ports and controls on the bottom. NATO Arm length approximately 4" 1/4-20 threaded and pass through holes - for attaching LCDs 2 x 1/4-20 x 3/8 socket cap screw2 x 6-32 socket flat head screws Weight 270 gDimensions 158.8 mmm x 145.3 mm x 30.8 mm

Wooden Camera V-Lock Accessory Wedge SKU: 229200 V-Lock Accessory Wedge is the dovetail portion of the V-Lock Base Station and Wedge Kit, based on the standard V-Lock or V-Dock as it is sometimes referred. The V-Lock Accessory Wedge portion of the kit can bolt into a 1/4-20 or 3/8-16 hole using the included screws and it is also threaded for 1/4-20 and 3/8-16 so accessories can screw into it. M3 hole pattern is also available for attaching to devices like the Preston MDR4 Mounting Plate and the Smartphone Clamp.

Wooden Camera V-Lock Base Station SKU: 229100 V-Lock Base Station is the receiver portion only and is based on the standard V-Lock or V-Dock as it is sometimes referred. The Base Station can bolt into a 1/4-20 or 3/8-16 hole using the included screws. Set screw can also be installed to prevent twisting. Additionally the Base Station has the hole pattern for the ARRI accessory mount pins. The Base Station is also threaded for 1/4-20 and 3/8-16 so accessories can screw into it.

Wooden Camera V-Lock Base Station and Wedge Kit SKU: 229000 V-Lock Base Station and Wedge Kit is a quick release set based on the standard V-Lock or V-Dock as it is sometimes referred. The Base Station portion can bolt into a 1/4-20 or 3/8-16 hole using the included screws. Set screw can also be installed to prevent twisting. Additionally the Base Station has the hole pattern for the ARRI accessory mount pins. The Base Station is also threaded for 1/4-20 and 3/8-16 so accessories can screw into it. The V-Lock Accessory Wedge portion of the kit can also bolt into a 1/4-20 or 3/8-16 hole using the included screws and it is also threaded for 1/4-20 and 3/8-16 so accessories can screw into it. M3 hole pattern is also available for attaching to devices like the Preston MDR4 Mounting Plate and the Smartphone Clamp.

Wooden Camera Vertical Camera BracketSKU: 269300Vertical Camera Bracket has 1/4-20 and 3/8-16 threaded holes plus pass through slots on both the horizontal and vertical plates for attaching to tripod plates, camera bodies, ARRI dovetails, and more. Made of durable, CNC machined aluminum, the bracket can accommodate even the heaviest camera packages.Includes2 x 3/8-16 Unified Bridgeplate Screw2 x 1/4-20 Unified Bridgeplate ScrewWeight: 1960gDimensions: 247.7 x 247.8 x 247.7 mm

Wooden Camera WiFi Side Plate (RED DSMC2) SKU: 228800 WiFi Side Plate (Weapon/Scarlet-W/Raven) provides an external WiFi antenna mount for the RED DSMC2 cameras and increases the signal range when using apps like FoolControl. This product is not a signal repeater but replaces the internal antenna altogether. The WiFi Side Plate attaches in place of the decorative right side panel and does not interfere with RED products like the Sidekick, DSMC2 Side Handle, or the cover plate that is included with camera. The Wooden Camera Right Side Plate and many third party products can still be attached like normal as well. This product works great in conjunction with the V-Lock Base Station and Wedge Kit and the Smartphone Clamp which allows you to mount your FoolControl device to the camera body or to a Magic Arm for easy viewing.

Zacuto Axis Mini SKU: Z-M-AEM The Axis Mini is the most adjustable ENG style mount for rosette mounted EVFs, giving you full 360º motion with four adjustment points. Designed to attach to the top of your camera set up, it leaves plenty of room at the lens for focusing and will work with the widest of lenses. It can easily be adjusted with one hand while the rig is on your shoulder. The Axis Mini has extensive articulation for use with a variety of cameras, both shoulder mounted in a Next Generation Recoil or in tripod operating position. It is very small and quick to install and remove. The Zacuto Axis Mini attaches to your rig via a 15mm rod port at the top of a kit positioned perpendicular to your camera lens. Slide the Axis Mini into the 15mm rod port and clamp into place. The Axis Mini attaches to the Gratical HD via a secure 1/4" 20 rosette mount. EVF's with a 1/4" 20 screw mount require the Quad Rail for use with the Axis Mini. Zacuto offers three 15mm rod port options (not included) to attach the Axis Mini: Recoil HandleC100 Axis MountZ-Rail Z-Lock The Axis Mini has three red tension levers that are controlled independently with 360 degree motion. Release all three levers to completely reposition the mount or release just one to make single segment adjustments. You can dial in the exact amount of tension needed at each lever to adjust on the fly. Just grab and move.

Zacuto Axis Mini for Sony FS5 SKU: Z-M-AEMFS5 The Axis Mini for Sony FS5 is the most adjustable ENG style mount for the Sony FS5 Monitor, giving you full 360º motion with four adjustment points. Designed to attach to the FS5 Top Plate, it leaves plenty of room at the lens for focusing and will work with the widest of lenses. It can easily be adjusted with one hand while the rig is on your shoulder. The Axis Mini has extensive articulation for use in a variety of positions, both shoulder mounted in a Next Generation Recoil or in tripod operating position. It is very small and quick to install and remove. The Zacuto Axis Mini for Sony FS5 attaches to your rig via a 15mm rod. Slide the Axis Mini into side facing 15mm rod port and clamp into place. If you don’t have a side facing rod port you can get the FS5 Top Plate . It attaches to the FS5 LCD with the included FS5 to ¼ 20 rosette adapter. Alternately, you can remove the adapter and attach the Axis Mini directly to a Gratical.

Zacuto Canon C400 CageSKU: Z-C4CGThe Canon C400 cage includes a top plate and two side rails that mount to the VCT Pro. The side rails are optional and not required to use with the top plate.The Top Plate has a built in Z-Rail to mount the Tactical Handle. The cage design maintains access to the hotshoe on the top rear of the camera for audio devices. It also has tapped holes to relocate Canon's mic shock mount to the side of the cage. The cage has several bi-directional Z-Rail, integrated cold shoe slots in the rear, numerous anti rotation 1/4 20 and 3/8 16 tapped holes, and removable top 15mm rod clamps.The side rails are Z-Rail with Arri style rosettes, anti rotation 1/4 20 and 3/8 16 tapped holes.

Zacuto Canon C400 Top PlateSKU: Z-C4TPThe Zacuto Canon C400 Top Plate is designed for the Canon C400 Camera. The C400 Top Plate has a built in Z-Rail (NATO Rail) to mount the Tactical Handle. The design maintains access to the hotshoe on the top rear of the camera for audio devices. It also has tapped holes to relocate Canon's mic shock mount to the side of the cage. The cage has several bi-directional Z-Rail, integrated cold shoe slots in the rear, numerous anti rotation 1/4 20 and 3/8 16 tapped holes, and removable top 15mm rod clamps.

Zacuto Canon C400 Z-Finder Recoil ProSKU: Z-C4ZRThe Zacuto Canon C400 Z-Finder Recoil Pro is a shoulder rig designed specifically for the Canon C400. This is a Next Generation Recoil rig designed for optimal balance and comfort when shoulder mounted or on a tripod. With lenses and cameras being similar weights, the balance point is where the lens meets the camera body. In a shoulder mount rig, the balance point needs to be directly over your shoulder which puts the camera behind you.The Recoil rig adjusts for that balance point and relocates focus, monitoring and camera controls forward, creating a lighter, shorter and properly balanced rig. The Canon C400 Shoulder-mounted rig includes ourVCT Pro baseplateRosette Trigger Grip to relocate the C400 handgripCanon C400 cageCanon C400 Z-Finder with rosette adapterAxis MiniTactical handleThis is the ultimate configuration for shoulder mounting the Canon C400 utilizing the Canon C400 LCD screen with Z-Finder.VCT Pro – this baseplate has a sliding top plate for quickly removing the camera from the rig or fast lens changes, a built-in, curved shoulder pad, a v-wedge tripod connector (with ¼” 20 and 3/8" 16 screw option). It has removable and extendable 6.5” rods and rows of 1/4” 20 screw holes along the sides for accessoriesRosette Trigger Grip- relocates the Canon camera grip to a comfortable handgrip position for shoulder rigs. Our trigger grips are the most adjustable grips available. They allow for single-handed 360° rotation with the simple press of a triggerCanon C400 Cage - The C400 cage includes a top plate and two side rails that mount to the VCT Pro. The side rails are optional and not required to use with the top plate. The Top Plate has a built in Z-Rail to mount the Tactical Handle. The cage design maintains access to the hotshoe on the top rear of the camera for audio devices. It also has tapped holes to relocate Canon's mic shock mount to the side of the cageTactical Handle- Our most versatile handle! With the turn of one ratcheting lever, this handle can be a top handle, left hand grip, or right hand grip- use it where you need it for your shooting style. The slim design fits comfortably in your handAxis Mini - the most adjustable style mount for rosette mounted Z-Finders and EVFs, giving you full 360º motion with four adjustment points. Designed to attach to the top of your camera set up, it leaves plenty of room at the lens for focusing and will work with the widest of lenses. It can easily be adjusted with one hand while the rig is on your shoulderCanon C400 Z-Finder and Rosette Mount- The Canon C400 Z-Finder is an optical viewfinder, specifically designed to attach to the Canon C400 LCD Monitor. This Z-Finder will magnify the LCD screen by 2.5x and has a diopter wheel for specific focus tuning. If you need extra focal points you can use the included Z-Finder Extender Frames

Zacuto Canon C70 Cage SKU: Z-C70C The Zacuto C70 Cage is our “no-cage” cage - lightweight and compact, and ready to accommodate any shooting style! It includes a Zacuto camera hand strap for a secure and comfortable grip on the camera. The cage also comes with an HDMI strain relief clamp and right angle HDMI adapter. It is compatible with Zacuto's own Arca Swiss- The 'ACT Recoil' to quickly transform from handheld run'n'gun shooting to shoulder-mounted to gimbal and more! The cage screws into the top and bottom of the camera with provided ¼"-20 screws for a rock solid connection. The top of the cage includes numerous ¼"-20 holes for mounting accessories. It also has built-in Z-Rails for mounting an optional handle or other accessories and features Canon's anti-twist grooves for mounting the camera's proprietary handle. The built-in Arca Swiss compatible bottom plate has three ¼"-20 threads and one 3/8"-16 thread for mounting a tripod plate or a Zacuto quick release plate. This allows you to move quickly from handheld, to shoulder mount, to tripod shooting. The cage also features an M6 ARRI rosette on the side for a handgrip, a coldshoe for mounting audio devices or a monitor, multiple ARRI anti-twist 3/8"-16 holes, and the option to relocate the camera's film plane screw to either side of the camera. No matter your style, this cage has you covered.

Zacuto Canon C80 CageSKU: Z-C80CCanon C80 cage including Zacuto camera hand strap for a secure and comfortable grip, HDMI strain relief clamp and right angle HDMI adapter - Compatible with the ACT Baseplate. The Canon C80 cage screws into the top and bottom of the camera with provided 1/4"-20 screws for a rock solid connection. The top of the cage includes numerous 1/4"-20 and 3/8"-16 holes for mounting accessories. It also has built-in Z-Rails for mounting an optional handle or other accessories and features Canon's anti-twist grooves for mounting the camera's proprietary handle.The built-in Arca Swiss compatible bottom plate has three 1/4"-20 threads and one 3/8"-16 thread for mounting a tripod plate or a Zacuto quick release plate. This allows you to move quickly from handheld, to shoulder mount, to tripod shooting.The cage also features an ARRI M6 rosette on the side for a handgrip, a coldshoe for mounting audio devices like a Zacuto MicroBoom or a monitor, multiple ARRI anti-twist 3/8"-16 holes, mounting holes to relocate the microphone, and the option to relocate the camera's film plane screw.

Zacuto Director's RigSKU: Z-SM-DR The Director Kit provides the tools you need to deliver the perfect shot with your mobile phone. Focus and frame your content in a completely immersive experience using the Smart Z-Finder. The Director’s Grip balances the rig for all day shooting and gives stability by adding a third point of contact to the rig. The Directors Grip allows you to get in places you can’t get with any other device. The Accessory Rail provides all the mounting points you need for 1/4-20, 3/8-16, or cold shoe devices.Zacuto Director Kit includesSmart Z-FinderBridgeHandstrapAccessory RailDirector’s GripDrop in Diopters x4 (+.5, +1, +1.5 and +2)Anti-Fog Discs x3

Zacuto GH5 Basic Cage SKU: Z-G5CA The Zacuto GH5 Cage is lightweight and compact, it packs in a ton of features! The GH5 Cage screws into the bottom of the camera with a provided 1/4 20 screw. It also attaches to the sides of the Panasonic GH5 camera, using the Panasonic eyelets neck strap connection with provided screws. It includes a Zacuto camera hand strap for a secure and comfortable grip on the camera. The cage ends at the eyelet neck strap connection, allowing you to use the camera's built in handgrip, keeping the cage small and light and have easy access to all camera controls. The top of the cage includes numerous ¼ 20 for mounting accessories. It also has a built in Z-Rail for mounting an optional top handle or other accessories. The bottom of the cage has 3 ¼ 20” thread for a tripod plate and a built in dovetail to slide into a VCT Pro shoulder mount baseplate or VCT Pro dock so you can quickly move your camera from handheld, to shoulder mount, to tripod shooting. The dovetail connection point is also where you will connect the optional 15mm lightweight rod support for attaching matte boxes, follow focuses, motors, etc. It will also slide onto our VCT Pro and VCT Pro Dock. The cage is designed for full access to the camera’s battery door, hotshoe and full button control. There is also a built in Metabones adapter support. Included with the cage is a left wooden handgrip with a built in cold shoe. Putting the coldshoe on the left gets it out of the way of the XLR cables for the optional Panasonic audio module mounted to the camera’s hotshoe. For those using the HDMI output, the cage includes an HDMI cable clamp to hold the full size HDMI cable steady to reduce strain. The cable clamp screws directly into the camera - so you can use it without the cage! Features Ultra Slim & LightweightIncludes a Zacuto camera hand strap for stability and comfort while using the camera’s gripAccess to camera’s battery, hotshoe and full button controlAttaches to camera’s neck strap eyelets for  secure connectionTop Z-Rail for top handle or accessoriesCan slide into the VCT Pro shoulder mount baseplate or DockHDMI cable clamp for strain reliefRemovable Wooden side handle with built in coldshoeOptional non-rod based Micro 4/3rds to EF Metabones supportOptional Top handle with built in cold shoe.HDMI pincher that screws directly into cameraOptional 15mm rod support base

Zacuto Gorilla Plate V2 SKU: Z-GRPV2 The Gorilla Plate V2 is a small platform baseplate designed for DSLRs and other small cameras. It is the only baseplate that is compatible with the Panasonic GH4 when used with a Zacuto Z-Finder. The Gorilla plate attaches to your camera using a standard 1/4 20 screw. You can mount a small tripod plate underneath the Gorilla plate to quickly move from handheld to tripod use. Or use the Gorilla Tripod Dock to keep a universal docking station on all your equipment. There is a 15mm rod port on the underside of the Gorilla Plate V2 controlled by a Zacuto quick release ratcheting lever. Use this port to add a handgrip or a run’n’gun kit like any of the gorilla kits- Enforcer or Marauder.

Zacuto Scissor Lens Support SKU: Z-SLS The Zacuto Scissor Lens Support is compatible with Fujinon MK lenses. The Scissor Lens Support attaches to the base of your lens with included M3.5 screws. It opens with a scissor motion to securely clip onto lightweight, height-adjustable 15mm rods. The lens support folds against the lens for easy storage.

Zacuto Sony FX6 Handle MountSKU: Z-S6HMThe Sony FX6 Handle Mount adapts the proprietary Sony accessory mount into a quick release 15mm rod port. It can rotate and angle up to 45 degrees. This allows you to attach our EVF Mounts (Axis Micro and Mini), and Kameleon EVF or Sony FX6 Z-Finder, loupe for the Sony LCD, and have it in the optimal position for shoulder mounted shooting.

Zacuto Sony FX6 Recoil Rig SKU: Z-SX6-P2 The Sony FX6 Recoil Rig is a shoulder rig designed specifically for the Sony FX6 camera. This is a Next Generation Recoil rig designed for optimal balance and comfort when shoulder mounted or on a tripod. With lenses and cameras being similar weights, the balance point is where the lens meets the camera body. In a shoulder mount rig, the balance point needs to be directly over your shoulder which puts the camera behind you. The Recoil rig adjusts for that balance point and relocates focus, monitoring and camera controls forward, creating a lighter, shorter and properly balanced rig. The Sony FX6 Recoil shoulder-mounted rig includes our VCT Pro baseplate, the Rosette Trigger Grip to relocate the Sony FX6 handgrip, a 13.5" LANC extension cable,  the FX6 Top Plate and the FX6 Handle Mount. This is the perfect rig to add a Kameleon EVF too! In the box 1 x Zacuto VCT Pro1 x Zacuto Sony Trigger Grip 1 x Zacuto FX6 Top Plate 1 x Sony FX6 Handle Mount

Zacuto Sony FX6 Z-Finder MountSKU Z-FRM-FX6The Sony FX6 Z-Finder Mount is used if you already own a Zacuto Z-Finder Pro. This gives you the appropriate mounts to secure your Z-Finder to the FX6 frame and utilize Sony’s mount.If you plan on using this Z-Finder in shoulder mounting configuration, we recommend using Zacuto’s FX6 Handle Mount to mount an Axis Mini, EVF Mount. 

Zacuto Sony FX6 Z-Finder Recoil Rig SKU: Z-SX6ZR-P2 The Sony FX6 Z-Finder Recoil Rig is a shoulder rig designed specifically for the Sony FX6 camera. This is a Next Generation Recoil rig designed for optimal balance and comfort when shoulder mounted or on a tripod. With lenses and cameras being similar weights, the balance point is where the lens meets the camera body. In a shoulder mount rig, the balance point needs to be directly over your shoulder which puts the camera behind you. The Recoil rig adjusts for that balance point and relocates focus, monitoring and camera controls forward, creating a lighter, shorter and properly balanced rig. The Sony FX6 Z-Finder Recoil  shoulder-mounted rig includes our VCT Pro baseplate, the Rosette Trigger Grip to relocate the Sony FX6 handgrip, a 13.5" LANC extension cable, the FX6 Top Plate, and FX6 Z-Finder with LCD Axis Adapter,  Axis Micro and Fluid Rosette Joint,  and the FX6 Handle Mount. This is the ultimate configuration for shoulder mounting the FX6 and utilizing the Sony LCD screen. In the box 1 x Zacuto VCT Pro1 x Zacuto Sony Trigger Grip 1 x Zacuto FX6 Top Plate 1 x Zacuto FX6 Z-Finder