Wooden Camera NATO Clamp SKU: 148700 Quick release clamp for Safety NATOs. Wooden Camera NATO Clamp great for attaching monitors, handles, and more. Weight 45.36 gDimensions 5.84 cm x 5.59 cm x 17.78 cm
Wooden Camera NATO Lock (Clamp Only) SKU: 199000 NATO Lock Kit (Clamp Only) is the quick release clamp portion of the NATO Lock Kit which is based on NATO standards. The clamp portion of the kit can bolt into a 1/4-20 or 3/8-16 hole using the included screws and it is also threaded for 1/4-20 and 3/8-16 so accessories can screw into it. Compatible with RED Swat Rails, Zacuto Z-Rails, and many 3rd party NATO products.
Wooden Camera NATO Lock Kit SKU: 198300 NATO Lock Kit is a quick release set based on a NATO standard rail. The rail portion can bolt into a 1/4-20 or 3/8-16 hole using the included screws. Set screw can also be installed to prevent twisting. The rail is also threaded for 1/4-20 and 3/8-16 so accessories can screw into it. The clamp portion of the kit can also bolt into a 1/4-20 or 3/8-16 hole using the included screws and it is also threaded for 1/4-20 and 3/8-16 so accessories can screw into. Wooden Camera NATO Lock Kit compatible with RED Swat Rails, Zacuto Z-Rails, and many 3rd party NATO products. Weight 50 gDimensions 47.2 mm x 47.2 mm x 18.3 mm
Wooden Camera NATO Side Rail for Canon EOS C400SKU: A00770Streamlined and secure, the NATO Side Rail mounts to the Top Plate near the rear of the camera body without touching the handle, providing additional 1/4”-20 and 3/8”-16 mounting points and the ability to use NATO clamp accessories. This rail attaches to the Top Plate via 1/4”-20 with a 3/16 Hex tool, and can be installed vertically or horizontally along the camera body without blocking access to camera functions or other accessories. Includes patented anti-twist safety pins for secure mounting of Teradek Bolt, Teradek RT MDR, and other accessories.Weight: 31.5 gDimensions: 21.2 x 25 x 97.5 mm
Wooden Camera NATO Side Rail for Canon EOS C80 SKU: A00836The NATO Side Rail for Canon EOS C80 allows you to add accessories along the side of the camera body. It securely attaches to the Top Plate and ARCA Riser for EOS C80 and incorporates a NATO Rail with our patented dual push pins for added safety. This allows you to mount accessories like the NATO Lock Ultra Arm (3”) or the Accessory Plate NATO Bracket to hold your monitors or accessory plates securely.3/8”-16 and 1/4”-20 mounting points run down the rail adding mounting points to the Operator’s side of the camera with a single forward-facing 3/8”-16 mounting point for accessories like Bolt-On Rods. A Tape Hook mounting point is also included on this Side Rail along with a removable HDMI safety clamp to support the connector on the camera.The design on the bottom of the rail allows the ARCA Riser to slide forward or backward depending on the mount being used, like the Canon RF to PL Mount Pro and Canon RF to ARRI LPL Mount Adapter.Weight: 76.7 gDimensions: 162.7 x 37.7 x 26.2 mm
Wooden Camera Offset Mount and V-Lock Kit for Bolt 4K LT TXSKU: K20004 Offset Mount and V-Lock Kit for Bolt 4K LT TX is a comprehensive kit that features a versatile mounting bracket for the Teradek Bolt 4K LT TX and a quick-release mounting dock for mounting directly to your camera.The included V-Lock Mounting Kit is a quick-release mounting kit based on the standard V-Lock mounting design. The Base Station portion can bolt into any 1/4"-20 or 3/8"-16 mounting point using the included screws. Set screws can also be installed to prevent twisting. The V-Lock Accessory Wedge portion of the kit features both 1/4"-20, 3/8"-16, and M3 mounting points for attaching accessories like the included Offset Mount for Bolt 4K LT TX. Users retain the option to detach the Offset Mount for Bolt 4K LT TX from the V-Lock Mounting Kit and mount onto any 1/4"-20 mounting point. Removable screw-in set pins located on both ends of the 1/4"-20 pass-through slot for added security and can be stored on the side of the unit when not in use. The Offset Mount can be mounted via one pass-through 1/4"-20 hole located at the top of the bracket.It also features one 3/8"-16 and two 1/4"-20 mounting points with locating pin depressions for securely attaching additional mounting interfaces such as articulating arms and rod components the same way users would attach the included V-Lock Mounting Kit. Weight: 184 gDimensions: 54 x 58.2 x 36 mm
Wooden Camera Offset Mount for Bolt 4K LT TXSKU: A20019 Utilize the offset 1/4"-20 pass-through slot to mount the Offset Mount for Bolt 4K LT TX directly onto any 1/4"-20 mounting point. Featuring removable screw-in set pins located on both ends of the 1/4"-20 pass-through slot for added security that can be removed when not in use and stored on the side of the unit. The Offset Mount can also be mounted via one pass-through 1/4"-20 hole located at the top of the bracket. It also features one 3/8"-16 and two 1/4"-20 mounting points with locating pin depressions for securely attaching additional mounting interfaces such as articulating arms, rod components, and mounting kits. Weight: 48 gDimensions: 54 x 58.2 x 16 mm
Wooden Camera Pass Through Top Plate (RED DSMC2) SKU: 229400 Pass Through Top plate for RED Weapon, Scarlet Weapon, and Raven which provides 26pin LCD connection and 3pin trigger handle interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (4) 1/4-20 captured screws. Wooden Camera Pass Through Top Plate is great for adding mounting points to your DSMC2 camera and allows for other cage and cable components like the Safety NATO Arm (Weapon/Scarlet-W/Raven) and RED Male Pogo to Female Pogo LCD/EVF Cables to be attached as well. Includes 4 x 1/4-20 x captured screws
Wooden Camera Preston MDR4 Mounting Plate SKU: 228900 Preston MDR4 Mounting Plate is a ultra-light mounting plate for the Preston MDR4 control unit. The M3 hole pattern on the back is compatible with the V-Lock Base Station and Wedge Kit which would be needed to mount the device to 1/4-20, 3/8-16, or the ARRI accessory mount. If you already have a V-Lock receiver, an individual V-Lock Accessory Wedge can be purchased.
Wooden Camera Quick Base SKU: 162000 Wooden Camera Quick Base (C100, C300, C500) is a quick release baseplate for the Canon Cinema EOS cameras that provides lightweight 15mm rod support at the correct lens height. Note that 15mm lightweight rods do not passthrough. If rear rods are needed, install additional Wooden Camera Rod Clamp (15mm LW) to rear. The baseplate can attach to any tripod plate or ARRI standard bridgeplate such as Bridgeplate (19mm) or Bridgeplate (15mm Studio). When studio rods are not needed, a Dovetail Clamp can be added instead to interface with 2060 Dovetails, Safety Dovetails, or Shoulder Rigs. Additional Rod Clamp (15mm LW) can be attached to rear of Quick Dovetail for independent rear rod support. To quick release out of dovetail/baseplate, turn thumbscrew and depress pin, move camera toward rear, and remove. Wooden Camera Quick Base Features 1/4-20 and 3/8-16 holes for attaching accessoriesQuick release slot based on ARRI standard dovetail1/4-20 and 3/8-16 holes on bottom for attaching to tripod or bridgeplateRosette Bracket - attaches to Quick Base front, provides ARRI standard rosettes for attaching handles and extensionsGO Shoulder - attaches to Quick Base rear, low profile shoulder pad for run and gun shooting Quick Base (C100, C300, C500) Includes 1 x 1/4-20 low profile screw1 x 3/8-16 low profile screw
Wooden Camera Quick Release Top Plate (Sony VENICE, VENICE 2) SKU: A00095 Customizable, endlessly configurable, and the industry’s only VENICE 2 Top Plate that slides on to the integrated dovetail on top of the camera for tool-less, quick-release transitions. The Top Plate features a bolt pattern with locating pins for mounting accessories anywhere on top of the camera, an integrated hook-and-loop mounting point, an integrated dovetail lock and safety release, plus 4x 1/4–20 screw-mounting points to secure the Top Plate to the camera body when quick-release access isn’t needed. Weight: 408 gDimensions: 190.5 x 103 x 13 mm
Wooden Camera Quick-Release Top Plate System (Sony VENICE, VENICE 2) SKU: A00208 Customizable, endlessly configurable, and the industry’s only VENICE 2 Top Plate that slides on to the integrated dovetail on top of the camera for tool-less, quick-release transitions. The Top Plate includes an integrated dovetail lock and safety release, plus 4x 1/4–20 screw-mounting points to secure the Top Plate to the camera body when quick-release isn’t needed. Build it out the way you want with optional Front and Rear Rod Brackets, Cheese Plate, Hook-and-loop Plate, and more, and slide the whole rigged plate on or off in one smooth sweep. Weight: 620.7 gDimensions: 216 mm x 153 mm x 60 mm Included Items Quick-Release Top Plate (Sony VENICE, VENICE 2)Top Plate 15mm Dual Rod Clamp (Sony VENICE, VENICE 2, Rialto, Rialto 2)Top Plate 15mm Upper Dual Rod Clamp (Sony VENICE, VENICE 2)Expansion Hook-and-Loop Plate (Sony VENICE, VENICE 2)Expansion Cheese Plate (Sony VENICE, VENICE 2)
Wooden Camera Rear Adaptor Plate CCH-5 SKU: A00408 An Adaptor Plate that allows users to attach the ARRI CCH-5 handle to the Wooden Camera Top Plate. Weight: 53.9 g Dimensions: 65 mm x 46 mm x 12.5 mm
Wooden Camera Rear Cage System (RED KOMODO-X) SKU: A00548 Utilizing the tie-in points at the top end of the camera's body, this Rear Cage System provides much-needed mounting points on the rear side of the camera. The cage allows users to tie into other components like the side rails, adding stability to the entire rig. A built-in Rail System utilizes Accessory Rails to further add a quick-release function to compatible accessories like Accessory Plates or the B-Box for (KOMODO, KOMODO-X, V-RAPTOR). This Wooden Camera Rear Cage System is also compatible with other accessories like the Rigging Top Plate.Included ItemsRear Cage - Right - RED KOMODO-XRear Cage - Left - RED KOMODO-XSpecificationsWeight: 123 gDimensions: 69 x 129 x 107 mm
Wooden Camera Rear Side Rail for FUJIFILM GFX ETERNA 55SKU: A00907This Rear Side Rail attaches directly to the rear mounting points on the camera body after the camera's connector protection bracket is removed. Its four mounting points provide a secure connection to the camera body and protect the camera's ports. This rail incorporates 3/8"-16 and 1/4"-20 mounting points, as well as a NATO rail along the length, allowing for a wide range of accessories to be attached.The NATO Rail provides enhanced safety features to protect both accessories and the camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory. Through holes were designed to reduce weight and allow screw-in accessories, without causing damage to the camera body. This Rear Side Rail incorporates a Wooden Camera patented line of products, featuring our innovative dual safety NATO design for added security and peace of mind.SpecificationsWeight: 53.52 gDimensions: 123.7 x 31.9 x 29.8 mm
Wooden Camera Rear Top Plate Extension for FUJIFILM GFX ETERNA 55SKU: A00971The Rear Top Plate Extension is a versatile accessory that offers secure mounting, EVF access, and multiple mounting points. Using a single 3/8”-16 screw, this plate attaches to the camera body and top plate extensions.The Wooden Camera Rear Top Plate Extension can be used with the Front Plate, Side Plate, or Power Strip. Please Note: The Front Plate Extension and Power Strip or Side Plate Extension are required for stability. This item does not work properly on the camera alone.SpecificationsWeight: 129.7 gDimensions: 124.9 x 77 x 18.8 mm
Wooden Camera Right Side Bracket (Alexa 35) SKU: A00383 Wooden Camera Right Side Bracket (Alexa 35) is a side Rail that mounts to the right side of the sensor body, featuring a DLC-coated stainless steel rosette, a forward-facing 3/8”-16 mounting point, 2 x 3/8”-16 and 2 x 1/4”-20 mounting points, a sensor-plane mark, and a swing-out tape hook. Dimensions: 38 mm x 15 mm x 122 mmWeight: 74.3 g
Wooden Camera Right Side Plate (Weapon/Scarlet-W/Raven) SKU: 227800 Wooden Camera Right Side Plate (Weapon/Scarlet-W/Raven) is a side mounting plate for RED Weapon, Scarlet-W, and Raven. Attaches directly to the side of the camera via four captured M3 screws. 1/4-20 holes in RED standard spacing and ARRI accessory mount in two places. M6 threaded ARRI rosette also available for handles like Wooden Camera Handgrip (Right).
Right Side Rail (Sony BURANO) SKU: A00533 The Right Side Rail gives users mounting points on the right side of the Sony BURANO as well as Sensor Plane markings. This rail offers four 3/8”-16 and three 1/4”-20, anti-twist mounting points on the side as well as a front facing 3/8”-16 mounting point where you can add accessories like Bolt-On Rods for lens motors or any of our universal accessories. These items attach to the Top Plate and ARCA Base Plate (Sony BURANO) via 1/4”-20 screws.Included Items: 3/16” Hex KeyWeight: 84.37 gDimensions: 49 x 22 x 168 mm
Wooden Camera Riser Plate for URSA Cine 12K/17KSKU: A00846This Riser Plate when combined with the ARCA Base Plate is compatible with any bridge plate that uses ARRI Standard height. Utilizing the built-in ARCA system, it allows for quick transitions between Steadicam, shoulder, or tripod workflows with Wooden Camera ARCA accessories.Two 3/8”-16 screws allow the plate to fasten to the bottom of the camera, and two pins incorporated into the base plate prevent the riser plate from twisting for a more secure connection. Four rod clamps– two on either side of the riser plate– provide powerful friction to prevent torque and rotation from your lens motors. The Riser Plate facilitates an open design allowing efficient airflow to the camera.SpecificationsWeight: 129.7gDimensions: 84.2 x 19 x 119.2 mm
Wooden Camera Riser Plate for FUJIFILM GFX ETERNA 55SKU: A00901The Riser Plate features integrated ARCA rails, enabling quick transitions between bridge plates, Shoulder, and Steadicam setups that utilize our ARCA plates.Two front-facing 15mm LWS Rod Mounts allow for connecting lens motors and other accessories. Individual tie-down points for rods ensure a secure connection and prevent rod rotation. Note: The rod pass-through feature has been removed due to camera dimensions and optical center requirements.The plate attaches to the camera body via two 3/8”-16 screws, setting it at its optical center for bridge plates and proper alignment of lens accessories. Raised edges on the plate conform to the camera, and pins near the tie-in points prevent rotation. This plate also provides access to the front-facing knob and switch on the camera.In addition, a rear 1/4”-20 screw mounting point is designed to secure our D-Box™ for FUJIFILM GFX ETERNA 55 to the Riser using our D-Box Support Bracket, preventing accidental discharge of the D-Box from the camera’s V-Mount during operation.Weight: 355.2 gDimensions: 192 x 127.2 x 17 mm
Wooden Camera Rod Clamp (15mm LW) SKU: 150200 Rod Clamp (15mm LW) can attach to existing 15mm rods to provide 1/4-20 mounting points. It can also be turned over and bolted to cheeseplates, cages, battery plates, and more. Extremely versatile, compact, and lightweight. Includes 2 x 1/4-20 x 1/4" screws2 x 1/4-20 x 3/4" screws Technical data Weight: 90 gDimensions: 11,17 cm x 2,54 cm x 1,52 cm
Wooden Camera Rod Clamp (19 mm) SKU: 150400 Wooden Camera Rod Clamp 19mm can attach to existing 19 mm rods to provide 1/4-20 and 3/8-16 mounting points. It can also be turned over and bolted to cheeseplates, cages, battery plates, and more. Extremely versatile, compact, and lightweight. Includes 2 x 1/4-20 x 1/4" screws2 x 1/4-20 x 3/4" screws Technical data Weight: 0.09 kgDimensions: 15.7 cm x 3 cm x 1.5 cm
Wooden Camera Rosette Arm SKU: 150600 Rosette extension arm with ARRI style rosettes on each end. For use with Crossbar, Bolt on Rosette (ARRI), Rosette Handle, and other ARRI compatible rosette equipment. M6 adjustable thumbscrew. Extends hand grip 6.6 inches (168mm) and jogs out 1.6 inches (42mm). Attaches directly to AJA CION, Sony FS7, Blackmagic URSA (using Blackmagic's rosette baseplate), ARRI Alexa, and ARRI Amira (using ARRI's Amira baseplate). Includes 1 x M6 nylon spacer Weight 198 gDimensions 203.2 mm x 53.7 mm x 32.2 mm