smallHD StrongArm 7 smallHD StrongArm 7 is the most versatile mounting option for SmallHD's Field Monitors Can connect directly to a camera's hot shoe or female 1/4-20 thread mount on a rails system. Single knob tightens all 3 articulating joints on the arm at once for maximum mobility and efficiency Length 150 mmWeight 285 g
smallHD 24" Sunhood for Cine 24 SKU: ACC-HOOD-4K-24 smallHD Sunhood for Cine 24 is 3- or 4-sided fabric reinforced sunhood for the Cine 24 monitor - Block out the sun with this rugged and easy to attach sunhood. Quickly convert from 3-sided to 4-sided with easy to access snaps. Attaches to screwholes in the Cheese Sticks on the top+side of your 4K monitor. Not compatible with Vision 24.
smallHD Ultra 7 Sunhood SKU: 17-1233 The smallHD Ultra 7 Sunhood improves viewing and protects the Ultra 7. It features tool-less mounting with magnetic top and side flaps, and an interior microfiber layer to prevent reflections and damage– a design that protects your monitor screen even when folded down. Toolless Design Protects the Screen when travelingMagnetic flaps make setup very quick and easyEasy to remove by snapping into the raised edges on the Ultra 7
smallHD Ultra Matte screen protector for 503 UltraBright SKU: ACC-SP-503U-MATTE Protects your screen from incidental contact, scratches, and more. Eliminate unwanted reflections with the ultra matte professional, flexible, and anti-reflective scratch protector. Does not provide impact protection to your screen.
smallHD Ultra Screen Protector for Ultra 7 Add a scratch-resistant screen protector to your SmallHD Ultra 7. You can choose from our Clear Screen Protector or our anti-reflection Matte Screen Protector. Options for Clear or Matte FinishProtects screen from dust and damageLightweight, yet strong
smallHD Ultra Screen Protector for Ultra 7 Add a scratch-resistant screen protector to your SmallHD Ultra 7. You can choose from our Clear Screen Protector or our anti-reflection Matte Screen Protector. Options for Clear or Matte FinishProtects screen from dust and damageLightweight, yet strong
smallHD UltraClear Screen Protector SKU: ACC-SP-702TOUCH-ULTRACLEAR smallHD UltraClear Screen Protector prevents screen scratches on your SmallHD Indie 7, 702 Touch, or Cine 7 monitor with this clear stick-on screen protector.
smallHD V-Mount Battery Bracket (Smart 7 Monitor Series)SKU: PWR-ADP-C7T-VM V-Mount Battery Bracket for Cine 7, 702 Touch, Indie 7 monitors. Installs directly to rear of V-Mount Battery Bracket for Cine 7, 702 Touch, Indie 7 monitors. Installs directly to rear of monitor.
smallHD V-Mount Battery Bracket Kit SKU: PWR-BB-700-VM-DCA-KIT Pro-Battery mounting solution for 700 series monitors. Power your 700 Series monitor with a V-Mount battery. This kit includes and battery plate, faux LP-E6 adapter and an Anton Bauer V-Mount battery bracket. Weight (Packaged) 226.80g
Vocas Director's monitor cage SKU: 0600-0900 Vocas Director’s monitor cage for monitors up to 7’’. The cage protects the monitor and provides a stable base. It includes the Vocas signature soft leather handgrips and a comfortable harness. The monitor cage is equipped with a 1/4’’ screw and can be mounted to both the top or the bottom of the monitor. Two pins are included to prevent the monitor from twisting. Top mount option: YesMounting options1/4" Thread, 3/8" ThreadMaterial: Aluminum, Cork, Industrial plastic, LeatherColor: BlackWeight: 402g
Vocas Director's monitor cage spigot adapter SKU: 0600-0910 Vocas Director’s monitor cage spigot adapter provides compatibility with both a tripod (via a 1/4’’ and 3/8’’ thread hole) and a spigot (16 mm connection). The Director’s monitor cage spigot adapter also makes your monitor tilt slightly backwards when placed on a flat surface. Material: AluminumColor: BlackWeight: 54g
Vocas Director's monitor cage sunshade SKU: 0600-0920 Vocas Director's monitor cage sunshade is water resistant and highly recommended for maximum reflection reduction, better contrast, colors and optimal true representation of the image. The height and width of the sunshade can be easily adjusted, depending on the dimensions of your 7’’ monitor. For monitors with a touch screen, the bottom section of the sunshade can be cut away to provide easy access to the screen. Material: Aluminum, FoamColor: GreyWeight: 156g
Vocas Director's monitor cage accessory bracket SKU: 0600-0930 Director’s monitor cage accessory bracket offers the possibility to add a video receiver or battery plate. All possible hole patterns are added for attaching any battery plate, as well as multiple slots for attaching a video receiver using a 1/4’’ screw. The Vocas Director's monitor cage accessory bracket can be mounted on several positions on the Director’s monitor cage, up to a maximum of two accessory brackets. Material: AluminumColor: BlackWeight: 110g
Vocas LCD monitor support for Sony FX6 SKU: 0700-0200 When the optional Sony eyepiece is used on the Sony FX6 LCD monitor, this bracket offers additional stability and a smooth adjustable friction needed to support the extra weight of the eyepiece. As a result of this the monitor will no longer move spontaneous, resulting in better ergonomics.
Vocas LCD monitor support for Sony FX6 deluxe kit When the optional Sony eyepiece is used on the Sony FX6 LCD monitor, this bracket offers additional stability and a smooth adjustable friction needed to support the extra weight of the eyepiece. As a result of this the monitor will no longer move spontaneous, resulting in better ergonomics. This kit adds a legth adjustment through a NATO rail. Please note that in some situations, the length adjustment is limited by the length of the monitor cable. Consisting of: Vocas LCD monitor support for Sony FX6 (0700-0200), Vocas Nato to 15 mm Viewfinder Bracket (0700-0072), Vocas Single NATO rail with Sony/Panasonic 8T 110 mm (0735-9060) and a Vocas Aluminum 15 mm rail, length: 60 mm (0350-9060).
Vocas LCD monitor support kit for Sony FX6 SKU: 0700-0205 When the optional Sony eyepiece is used on the Sony FX6 LCD monitor, this bracket offers additional stability and a smooth adjustable friction needed to support the extra weight of the eyepiece. As a result of this the monitor will no longer move spontaneous, resulting in better ergonomics. This kit includes our 56mm long Sony 8T to 15mm viewfinder bracket (0350-1476). This viewfinder bracket replaces the original Sony PXW-FS5 or FX6 viewfinder bracket and offers a stronger, 30 mm longer connection.
Wooden Camera Bolt-On Monitor Hinge CubeSKU: A00734The Bolt-On Monitor Hinge Cube was designed to securely mount monitors to the items via 1/4”-20 mounting points. Using the dual Rosettes design, the user can easily adjust the positioning of the monitor securing its position without possibility of slippage. The cube features 3/8”-16 mounting points for additional accessories. Removable anti-twist pins are compatible with SmallHD monitor mounting points or other 3rd party monitors.SpecificationsWeight: 75.75 gDimensions: 48.2 x 25.3 x 47.9 mm
Wooden Camera Directors Monitor Cage v3 SKU: 270000 The Director's Monitor Cage v3 is engineered to be universally compatible with any monitor up to 9 inches (measured diagonally) and attaches via top, bottom, or rear 1/4-20 mounting locations. New design provides 33% weight reduction compared to the previous model and adds unique new features like a dual direction swing away bracket, quick release neck strap, dual Teradek mounting areas, and carbon fiber rods and handles.The DMCv3 arrives mostly pre-assembled, with simple, rod-based height adjustment. Carbon fiber hand grips can be quickly positioned via the built-in 15mm clamps. The battery mounting plate features V-Mount and Gold Mount attachment points as well as dual direction swing away functionality for easy access to the rear of the monitor and installed wireless devices. The battery bracket can also be quickly removed when both swing clamps are loosened. The cage includes a built in baby pin clamp with locking thumbwheel for stand mounting and holes on the main brackets for attaching directly to the back of Convergent Design Odyssey and Apollo.The included sun shade is adaptable to most monitors and snaps directly to the cage frame. The bottom of the shade is made of velcro, which can be adjusted to the proper width of the monitor and an included loop piece can be used to hook onto the bottom of the cage for a more permanent mounting of the shade.The tool-less design of the handles allow them to be folded in for easy packing and the sun shade can be repurposed to act as a protective cover. Also included is a padded neck strap with 4 mounting points and quick release clips, Teradek mounting areas that allow up to two wireless receivers to be mounted side by side, and a cable tie for cable management. Side-by-side mounting of two monitors is also possible with the Dual Director's Monitor Cage v3! WORKS WITH SmallHD DP4, DP6, AC7, DP7, 500 Series, 700 Series, Cine 7, 702 Touch, FOCUS 5/ FOCUS 7, and UltraBrightTVLogic VFM-056W/WP, VFM-058W, VFM-055A, F-7H, F-5AIkan D5, VK7i, VH8, VL5, VX9e, DH5e, DH7, D7C, S7H, S7C, S7P Odyssey 7, 7Q, 7Q+Blackmagic Video Assist Atomos Samurai, Ninja, Shogun, ShinobiAnd many more INCLUDES 6 x 1/4-20 x 1/2" button head screws6 x 1/4-20 x 3/8" button head screws2 x Offset adapters4 x M3 x 8mm phillips screws (for V-Mount plate)4 x M3 x 12mm phillips screws (for Gold Mount plate)4 x #4-40 x 1/2" socket cap screws (for Teradek receiver)4 x M3 x 12mm pan head phillips screws (for Teradek XT/LT) 4 x M3 x 6mm socket cap screws (for Odyssey 7Q)1 x WC Cable Tie1 x Sun Shade 1 x Neck Strap Specifications Weight: 476 g Dimensions: 279.4 mm x 177.8 mm x 101.6 mm For powering LCD and wireless receiver, consider the WC V-Mount (Dual D-Tap) or WC Gold Mount (Dual D-Tap).
Wooden Camera LCD Sun Shade (4 - 5 Inch) SKU: 218700 Wooden Camera LCD Sun Shade (4-5") attaches quickly using elastic straps to monitors 4 to 5 inches (measured diagonally) which is perfect for the RED 4.7" and 5" Touchscreen. Coverage on all sides allows LCDs to be viewed in harsh lighting conditions and flexible bottom area allows the hand to access the screen controls without obstruction. An adhesive backed velcro strip is also included for attaching direct to LCD frame rather than using elastic straps. Weight 64 gDimensions 114 mm x 89 mm x 76 mm
Wooden Camera LCD Sun Shade (6 - 7 Inch) SKU: 218800 Wooden Camera LCD Sun Shade (6-7") attaches quickly using elastic straps to monitors 6 to 7 inches (measured diagonally) which is perfect for the RED 7" Touchscreen and original RED 7" LCD. Coverage on all sides allows LCDs to be viewed in harsh lighting conditions and flexible bottom area allows the hand to access the screen controls without obstruction. Weight 122gDimensions 178 mm x 114 mm x 102 mm
Monitor Hinge (SmallHD Smart 5, 3/8"-16) SKU: A00267 Tilting hinge for mounting on-camera monitors to any 3/8"-16 mounting point with ARRI-standard locating pins. Designed with a 180-degree tilt for shifting viewing angle. Upper attachment features a 1/4”-20 screw with standard locating pins for SmallHD monitors and includes an additional rubber pad for attaching third party monitors. Included 15mm mounting spud allows for upper attachment to be quick released and mounted onto any 15mm rod clamp. This hinge was specifically designed to align perfectly with the pinholes with any of the SmallHD Smart 5 Monitors. Includes: 15mm Mounting SpudWeight: 58gDimensions: 27 x 39 x 51 mm
Monitor Hinge (SmallHD Smart 5, ARCA)SKU: A00265 Monitor Hinge (ARCA Swiss) can attach into ARCA dovetail like the one found on a RED KOMODO Top mount, which is sold separately. When combined with KOMODO Top Mount, system provides a direct 1/4”-20 mount for SmallHD monitors. Included rubber pad can be added for attaching third party monitors. A 15mm mounting spud is included and allows monitor arm to be quick released and attached onto Top Handle (ARCA Swiss) which is also sold separately. This hinge was specifically designed to align perfectly with the pinholes with any of the SmallHD Smart 5 Monitors Weight: 60 gDimensions: 50.8 x 50.8 x 38.1 mm
Monitor Hinge (SmallHD Smart 5, Canon C Series Cameras) SKU: A00264 Tilting hinge for mounting on-camera monitors to Canon EOS C70. Designed with a 180-degree tilt for shifting viewing angle. The lower mount features interlocking ridges with an integrated 1/4”-20 screw for compatible mounting with any standard Canon Accessory Mount, including the Canon C70 hot shoe, Top Handle (Canon C70), and Top Plate (Canon C70). Upper attachment features a 1/4”-20 screw with standard locating pins for SmallHD monitors and includes an additional rubber pad for attaching third party monitors. This hinge was specifically designed to align perfectly with the pinholes with any of the SmallHD Smart 5 Monitors. Weight: 57gDimensions: 38 x 50.8 x 31.7mm
Monitor Hinge Replacement Arm (SmallHD Smart 5)SKU: A00334Replacement Hinge Arm that allows you to mount any of SmallHD’s Smart 5 monitors on the opposite side of the pivot that is included with the Monitor Hinge (Smart 5 - ARCA, 3/8”-16 and Canon C Series). Features a 1/4”-20 screw with standard locating pins for SmallHD monitors and includes an additional rubber pad for attaching third party monitors. This hinge was specifically designed to align perfectly with the pinholes with any of the SmallHD Smart 5 Monitors.Weight: 57gDimensions: 38 x 50.8 x 31.7mm