8Sinn Cage for Atomos Ninja V / V+ SKU: 8-ANV C 8Sinn Cage for Atomos Ninja V is designed for Atomos Ninja V. 8Sinn cages have many features that make them unique. Above all is the original modern design, fitted to professional filmmakers creativity. The main goal while designing was to make 8Sinn cage as sturdy and functional as possible. With multiple 1/4"-20 mounting points your equipment will be ready to go. Features Ergonomic Design and Organic ShapeOne piece of aluminiumBuild in two NATO Rails & Anti-twist locking pinsEasy access to all socketsMany Mounting Points & HDMi Cable Clamp Set includes 1 x 8Sinn Cage for Atomos Ninja V1 x 8Sinn HDMI cable clamp Technical data Dimensions: 172mm x 107mm x 27mmWeight: 122g

8Sinn Directors Monitor Cage V2 SKU: 8-DMCV2 8Sinn Directors Monitor Cage is an universal tool for a wide range of monitors with bottom attachment. Adjustable, foam covered handles with the widened top to provide safer grip during long usage (stop point in case of loosening your grip). Handles can be adjusted without tools, however, they have an option to use a 4mm allen key in case of screwing it too tightly. The backplate is equipped with M3 mounting points essential for mounting battery plates (V-Mount or Gold Mount). Free space with the 1/4" between the battery mounting plate and the back of the monitor gives room for mounting wireless transmitters. The cage also has the opening with the thumbwheel for stand mounting. To decrease friction between the monitor and the cage we placed some rubber pads at the bottom. Strap attachment can be useful to increase the safety factor. Comfortable preview on your current work. Key features Universal (for monitors up to 7") 1/4" mounting points Adjustable foam handles Rubber padas Battery plate with M3 mounting points

8Sinn Monitor Holder + Safety NATO Rail 60mm 8Sinn Monitor Holder consists of two arms, one regulating knob and one mounting thumb screw. Rubber pads located the holder mounting surface, prevent from any unwanted friction. Monitor holder can be mounted on built-in or separate Safety NATO Rail. Safety NATO Rail provides the cameraman with quick release system and left/right adjustment. The angle of the monitor support arm can be adjusted by freely accessible regulating knob. It has over 180 degrees regulation range. Holder is attached to the monitor by 1/4'' screw so that mounting can be done without any tools. 8Sinn Monitor Holder is an universal accessory, created to work with all monitors equipped with 1/4" threaded mounting opening.

8Sinn Monitor Holder on NATO Rail + Safety NATO Rail 95mmSKU: 8-MH+8-SNR95MMMonitor Holder + 95mmm rail can be attached directly on top of the Red Komodo camera, or on top of the RED KOMODO Outrigger Handle. Safety NATO Rail mounting solution provides a quick-release system and left/right adjustment. The angle of the main arm can be adjusted by 180 degrees. One thumbscrew serves to adjust the position of the holder on the NATO rail and locks the chosen angle. Rubber pads prevent any unwanted friction. 8Sinn Monitor Holder works with all monitors equipped with a 1/4" threaded mounting opening.Height: 31mm, Length: 78mm, Width: 95mm, Weight: 91gSet includes1 x 8Sinn Monitor Holder on NATO Rail1 x 8Sinn Safety NATO Rail 95mmFeaturesHolder1/4" mounting screw180-degree adjustmentNATO standardRubber padsAluminum madeRail95mm long NATO railSafety pin3/8" thread + Arri locating points

ATOMOS 5-inch Accessory Kit II SKU: ATOMACCKT4The Atomos 5" accessory kit for the Ninja and SHINOBI features: a sunhood, screenprotector, DC Cable, Quick Charger, two NP-F750 5200 mAh and an EVA case Compatible with Ninja and ShinobiMaterial Softcase: Synthetic materialAccessories made for Atomos 5" Recorder/Monitors5" SunhoodPractical softcase In the box1 x Sunhood1 x Screenprotector1 x DC Cable1 x Quick Charger2 x NP-F750 5200 mAh Battery1 x EVA Case

ATOMOS AtomX CastSKU: ATOMXCST01 ATOMOS AtomX Cast is a modular companion for the Atomos Ninja V or Atomos Ninja V+ monitor-recorder that uses the AtomX expansion port on the Ninja V/V+ to transform it into an advanced multi-input switcher. The combination of the Ninja V and AtomX CAST becomes the Ninja CAST, a fully functional stand-alone switcher, multiview monitor and broadcast quality recorder that does not require a computer to function. With a high quality 5” HDR touchscreen monitor, 4 x HDMI inputs and physical buttons, the Ninja CAST is the ultimate portable live switching and streaming solution. Features WebCAST – Plug and Play UVC connection to your favourite software such as Zoom, MS Teams, Skype, OBS and moreBroadCAST – quality switching and recording in ProRes, DNx and option for h.265MultiCAST – Simultaneously Record, Stream and output to local displays. Separate HDMI outputs – one for dedicated program out and one multi-function output for Multi-view, Preview or ProgramOverlay custom graphics, logos, lower thirds and content branding and use Picture in Picture effect for any combination of inputsUser friendly design incorporating both the touchscreen of the Ninja V / Ninja V+ with the physical buttons of the dock for easy use and deployment in a compact solution.Expand and transform Ninja V/V+ in to a 4 x HDMI input switcherTouch Screen and Physical buttons with LED status indicatorsAudio Input and switching options with support for embedded, analogue inputs and Audio follow VideoEasy Quick deployment of reiable stand alone - Simply Connect,  Switch and Stream In the box 1 x AtomX Cast1 x USB-C Cable1 x AtomX SSD mini handle

ATOMOS D-Tap to DC Locked connector Barrel Coiled CableSKU: ATOMDTPCB2The Atomos D-Tap to DC Barrel spiral cable allows Atomos recorders such as the Ninja V and Shogun Inferno to be powered by an external battery. The output of the power source must not exceed 16.8VDC. 12V or 14V sources are optimal. Once the cable is in use, any other battery will be ignored.

Atomos Docking Station USB 2.0 & 3.0 SKU: ATOMDCK003 The integrated USB cable of Atomos Docking Station USB features one USB 3.0 and one USB 2.0 connector, with the latter provided for compatibility with older computers.

Atomos LCD Protector for SUMOSKU: ATOMLCDP02 The Atomos SUMO LCD screen protector for the SUMO 19 and the SUMO 19M was specially developed for this touch panel and offers a matte surface that reduces reflections while protecting the touch panel from scratches. The screen protector absorbs polarized light so you can see the monitor even when wearing polarized sunglasses.

ATOMOS Sunhood for Ninja V and Shinobi SKU: ATOMSUN007 ATOMOS Sunhood for the Atomos Ninja V, Shinobi and Shinobi SDI is a high quality sunhood and an absolute must have for outdoor filmmaking. It successfully blocks sun and surrounding reflections and enables you to evaluate your filmmaterial on your display without any mistakes.

Atomos Sunhood for Sumo 19" Monitor SKU: ATOM19SUN1 Atomos Sunhood for Sumo 19" Monitor will block excess reflections from washing out the displayed image. This is important when viewing HDR imagery, which naturally uses a larger contrast range, and can easily be overpowered by glare. The hood attaches via an integrated mounting bracket and uses zippers to retain its shape. Designed for: Sumo19, Sumo19M

ATOMOS Universal Accessory Kit SKU: ATOMACCKT5 The Accessory Kit from Atomos includes everything you'll need for a complete workflow with your 7" Shogun monitor. The kit comes with two 5200mAh batteries, a fast charger, a USB docking station, a D-Tap power cable, a power adapter, four Master Caddy II drive caddies, and a sunhood. A hard-shell flight case is also included to store and transport your monitor and all its accessories.The sunhoods integrated in the Universal Accessory Kit are compatible with the following devices: Shinobi HDMI, Ninja V, Ninja V, Ninja V+, Ninja, Ninja Ultra, Shogun, Shogun Connect and Shogun Ultra. Not suitable for Shinobi 7''! In the box 1x Hard flight case (HPRC)1x USB 3.0 Docking Station1x D-TAP to DC coiled cabel2 x Master Caddy III1x fastcharger1 x DC power supply1 x USB-C to 2.1mm PD power cable 2m2 x 5200 mAh Battery (NP-F750) 7" to 5" foam adapter1 x 5" Sunhood for Ninja1 x 5" neoprene sleeve1 x 7" Sunhood for ShogunConnect1 x 7" neoprene sleeve1 x neoprene sleeve for antennas1 x SSD mini handle1 x Display cleaning cloth

Atomos Z-Mount SKU: ATOMZMT001 The ATOMOS Z-Mount offers unmatched flexibility for mounting Atomos monitors (5 and 7 inch) or third-party devices that need to be used in a variety of different scenarios or mounting positions. The sleek and durable Z-Mount features a revolutionary design and is made entirely of aluminum. It is also possible to attach monitors/recorders to the Sumo 19SE production monitor via VESA mounting holes. The Quick-Release base plate makes attaching and detaching equipment a breeze. The additional 1/4"20 mounting holes can be used to attach accessories such as Sprig cable management clips or as loops for cable ties. A versatile and compact accessory that fits seamlessly into any creative's toolbox. Features Z-Mount Allows flexible use of 5-inch and 7-inch monitors in desktop environments for streaming, switching, conferencing, and game captureAttaches Atomos Connect-enabled devices to unconnected production monitors, such as the Sumo 19SE, via VESA mounting holesEasy height and tilt adjustment via folding arms and friction-based jointsRedesigned quick release plate with retractable locating pinsMultiple 1/4"20 mounting holes for cable management/accessoriesHeavy duty all aluminum construction

Freefly Adjustable Monitor Mount Quick Release SKU: 910-00680 The monitor attaches to the mount using a quick release 13mm plug, making it compatible with any 13mm mount accessories in the Freefly ecosystem. Two types of mounting hardware are included. The recommended method is 2x M3 fasteners, which keeps it from rotating when installed to the top, bottom or sides of the camera (as needed). But we also included a 1/4" 20 mount for quick install or universal mounting to other items with 1/4" 20 threaded holes.

KUPO 162MB Monitor Stand II Monitor stand II is primary designed for securely mounting your monitor on set or location. The welded 16mm (5/8”) baby pin is also ideal for lighting fixture or any equipment comes with a 16mm (5/8”) baby receiver. The optional caster sets (KC-100M) makes the stand movable easily. Technical data 2 risers, 3 sectionsPowder coated steel standDia. 45mm; 40mm, 35mmLeg size: 25x25mmOne leveling legMay stand alone with legs folded.

KUPO Super Knuckle VESA Monitor Mount Kit The VESA Monitor Mount Kit is designed for lightweight monitors. With its Super Knuckle design, the VESA Monitor Mount Kit can easily rotate a monitor from landscape to portrait viewing. The single knob in the center tightens both ball joints simultaneously, and the 26mm dia ball has a serrated surface for secure locking. The X-design has mounting holes for VESA mount points of 75x75mm and 100x100mm. The Super Knuckle VESA Monitor Mount Kit can support up to 8kg and features a Baby 5/8" Receiver to secure it to any baby light stand, c-stand, or accessory. Features Standard VESA mounting holes 75x75mm & 100x100mmSupports up to 8kgEasy and instantaneous rotatation of a monitor from landscape to portrait viewing5/8in (16mm) Baby Receiver and knob to secure to any baby light stand, c-stand, or accessoryOne central knob securely locks two ball heads

MID49 Monitor Hinge (Canon C300mkIII, C500mkII)SKU: M49-MON-CAN-3003 Monitor Hinge (Canon C300mkIII, C500mkII) attaches to Canon 1/4-20 striped rosettes on camera body or handle, and holds the Canon LM-V2 4.3" LCD Monitor, which is included with those cameras. Positioning arm pivots in two places using variable friction 15mm rod clamps, which allows for a smooth, tool-less repositioning of the monitor. Simply grab and adjust. On the side of the horizontal 15mm rod, a 1/4-20 and locating tabs allow for the original Canon mic holder (Canon part DG3-7370-000) to be attached using included 1/4-20 knurled knob. The rod can also be flipped, allowing the monitor to be positioned in front of the operator during hand-held shooting. Weight: 85gDimensions (WxLxH): 37 x 112 x 118mm

MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 SpudsSKU: M49-TWB-ARM3-A142-A142TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.Included in this kit are two ARRI 1/4-20, which have removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing, which can be found on some random, 3rd party products.ARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to centerSecond set of holes for 3mm pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 1/4-20 holesWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1

MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 3/8-16 SpudsSKU: M49-TWB-ARM3-A142-A38TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 3/8-16 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp.With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.Included in this kit is one ARRI 1/4-20, which has removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing which can be found on some random, 3rd party products.Also included is one ARRI 3/8-16, which has removable 3mm locating pins in 15mm spacing, center to center.ARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to centerSecond set of holes for 3mm pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 1/4-20 holesWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 3/8-16 holesWorks with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)

MID49 TWIST Ball Monitor MountTWIST Ball Monitor Mount is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3, 6, and 9-inch arm kits include the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Choose your SpudsNo SpudA 15mm friction hole with no mounting spudARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center       Second set of holes for 3mm pins 15mm center to center       Works with any cheese plate or accessory with ARRI standard 1/4-20 holes       Works with Blackmagic Design PYXIS Monitor       Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5       Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to center        Works with any cheese plate or accessory with ARRI standard 3/8-16 holes       Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2ARRI M6 RosetteWorks with Z CAM 2.89" EVF101       Works with original PORTKEYS OEYESony / PortKeys 1/4-20   Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9       Works with Sony Burano EVF Pivot Adapter        Works with PORTKEYS LH7P (be careful, the monitor is plastic)       Works with PORTKEYS 5” BM5 IVL Bracket 1/4-20       Includes the slotted L Bracket with two 1/4-20 screws       Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions       Works with original RED DSMC1 EVFFemale ARRI 1/4-20        Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16      Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  1/4-20 Rosette      Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder       Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF       This is NOT a regular ARRI rosette    Old-Style SmallHD 1/4-20       Older style SmallHD 1/4-20 with wide locating tabs       Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5        Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7  ARRI Viewfinder Wedge      Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2      Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.      Works with 3rd party products that utilize ARRI-style mounting wedges.   Blackmagic Viewfinder Wedge        Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges        Works with URSA Cine EVF - CINEURSAB/EVF       Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT       Works with PYXIS Monitor Kit - CINEURSABB/AMKIT   Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)       Standard receptacle for 2-prong action camera feet       Works with GoPro, DJI Osmo Action, Insta360       Works with many other 3rd party action camera products  Sony FX6      Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained   Male Hot Shoe      Clamps to standard camera shoe mounts   Female Hot Shoe      Female shoe receptacle for standard shoe accessories    NATO Rail       Standard NATO rail with safety pins on each end       Mounting area between pins is 30mm  NATO Clamp       Standard NATO clamp with ratcheting thumbscrew       Clamping area between outside edges 21mm     Tripod Expansion Adapter        Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount      Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available

MID49 TWIST Ball Monitor MountTWIST Ball Monitor Mount is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3, 6, and 9-inch arm kits include the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Choose your SpudsNo SpudA 15mm friction hole with no mounting spudARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center       Second set of holes for 3mm pins 15mm center to center       Works with any cheese plate or accessory with ARRI standard 1/4-20 holes       Works with Blackmagic Design PYXIS Monitor       Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5       Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to center        Works with any cheese plate or accessory with ARRI standard 3/8-16 holes       Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2ARRI M6 RosetteWorks with Z CAM 2.89" EVF101       Works with original PORTKEYS OEYESony / PortKeys 1/4-20   Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9       Works with Sony Burano EVF Pivot Adapter        Works with PORTKEYS LH7P (be careful, the monitor is plastic)       Works with PORTKEYS 5” BM5 IVL Bracket 1/4-20       Includes the slotted L Bracket with two 1/4-20 screws       Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions       Works with original RED DSMC1 EVFFemale ARRI 1/4-20        Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16      Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  1/4-20 Rosette      Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder       Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF       This is NOT a regular ARRI rosette    Old-Style SmallHD 1/4-20       Older style SmallHD 1/4-20 with wide locating tabs       Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5        Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7  ARRI Viewfinder Wedge      Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2      Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.      Works with 3rd party products that utilize ARRI-style mounting wedges.   Blackmagic Viewfinder Wedge        Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges        Works with URSA Cine EVF - CINEURSAB/EVF       Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT       Works with PYXIS Monitor Kit - CINEURSABB/AMKIT   Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)       Standard receptacle for 2-prong action camera feet       Works with GoPro, DJI Osmo Action, Insta360       Works with many other 3rd party action camera products  Sony FX6      Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained   Male Hot Shoe      Clamps to standard camera shoe mounts   Female Hot Shoe      Female shoe receptacle for standard shoe accessories    NATO Rail       Standard NATO rail with safety pins on each end       Mounting area between pins is 30mm  NATO Clamp       Standard NATO clamp with ratcheting thumbscrew       Clamping area between outside edges 21mm     Tripod Expansion Adapter        Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount      Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available

MID49 TWIST Ball Monitor MountTWIST Ball Monitor Mount is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3, 6, and 9-inch arm kits include the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Choose your SpudsNo SpudA 15mm friction hole with no mounting spudARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center       Second set of holes for 3mm pins 15mm center to center       Works with any cheese plate or accessory with ARRI standard 1/4-20 holes       Works with Blackmagic Design PYXIS Monitor       Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5       Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to center        Works with any cheese plate or accessory with ARRI standard 3/8-16 holes       Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2ARRI M6 RosetteWorks with Z CAM 2.89" EVF101       Works with original PORTKEYS OEYESony / PortKeys 1/4-20   Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9       Works with Sony Burano EVF Pivot Adapter        Works with PORTKEYS LH7P (be careful, the monitor is plastic)       Works with PORTKEYS 5” BM5 IVL Bracket 1/4-20       Includes the slotted L Bracket with two 1/4-20 screws       Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions       Works with original RED DSMC1 EVFFemale ARRI 1/4-20        Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16      Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  1/4-20 Rosette      Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder       Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF       This is NOT a regular ARRI rosette    Old-Style SmallHD 1/4-20       Older style SmallHD 1/4-20 with wide locating tabs       Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5        Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7  ARRI Viewfinder Wedge      Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2      Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.      Works with 3rd party products that utilize ARRI-style mounting wedges.   Blackmagic Viewfinder Wedge        Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges        Works with URSA Cine EVF - CINEURSAB/EVF       Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT       Works with PYXIS Monitor Kit - CINEURSABB/AMKIT   Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)       Standard receptacle for 2-prong action camera feet       Works with GoPro, DJI Osmo Action, Insta360       Works with many other 3rd party action camera products  Sony FX6      Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained   Male Hot Shoe      Clamps to standard camera shoe mounts   Female Hot Shoe      Female shoe receptacle for standard shoe accessories    NATO Rail       Standard NATO rail with safety pins on each end       Mounting area between pins is 30mm  NATO Clamp       Standard NATO clamp with ratcheting thumbscrew       Clamping area between outside edges 21mm     Tripod Expansion Adapter        Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount      Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available

MID49 TWIST Ball Monitor Mount with ARRI 1/4-20 + ARRI 3/8-16 SpudsSKU: M49-TWB-ARM0-A142-A38 TWIST Ball Monitor Mount with ARRI 1/4-20 + ARRI 3/8-16 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.Included in this kit is one ARRI 1/4-20, which has removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing which can be found on some random, 3rd party products.Also included is one ARRI 3/8-16, which has removable 3mm locating pins in 15mm spacing, center to center. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.ARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to centerSecond set of holes for 3mm pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 1/4-20 holesWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 3/8-16 holesWorks with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)

MID49 TWIST Ball Monitor MountTWIST Ball Monitor Mount is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3, 6, and 9-inch arm kits include the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Choose your SpudsNo SpudA 15mm friction hole with no mounting spudARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center       Second set of holes for 3mm pins 15mm center to center       Works with any cheese plate or accessory with ARRI standard 1/4-20 holes       Works with Blackmagic Design PYXIS Monitor       Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5       Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to center        Works with any cheese plate or accessory with ARRI standard 3/8-16 holes       Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2ARRI M6 RosetteWorks with Z CAM 2.89" EVF101       Works with original PORTKEYS OEYESony / PortKeys 1/4-20   Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9       Works with Sony Burano EVF Pivot Adapter        Works with PORTKEYS LH7P (be careful, the monitor is plastic)       Works with PORTKEYS 5” BM5 IVL Bracket 1/4-20       Includes the slotted L Bracket with two 1/4-20 screws       Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions       Works with original RED DSMC1 EVFFemale ARRI 1/4-20        Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16      Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  1/4-20 Rosette      Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder       Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF       This is NOT a regular ARRI rosette    Old-Style SmallHD 1/4-20       Older style SmallHD 1/4-20 with wide locating tabs       Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5        Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7  ARRI Viewfinder Wedge      Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2      Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.      Works with 3rd party products that utilize ARRI-style mounting wedges.   Blackmagic Viewfinder Wedge        Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges        Works with URSA Cine EVF - CINEURSAB/EVF       Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT       Works with PYXIS Monitor Kit - CINEURSABB/AMKIT   Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)       Standard receptacle for 2-prong action camera feet       Works with GoPro, DJI Osmo Action, Insta360       Works with many other 3rd party action camera products  Sony FX6      Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained   Male Hot Shoe      Clamps to standard camera shoe mounts   Female Hot Shoe      Female shoe receptacle for standard shoe accessories    NATO Rail       Standard NATO rail with safety pins on each end       Mounting area between pins is 30mm  NATO Clamp       Standard NATO clamp with ratcheting thumbscrew       Clamping area between outside edges 21mm     Tripod Expansion Adapter        Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount      Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available