Blackmagic SDI Expander 8x12GBlackmagic SDI Expander 8x12G converts in 2 directions at the same time! It converts 8 independent channels of 12G-SDI to SMPTE-2110, while simultaneously converting a separate set of 8 channels of SMPTE-2110 back to 12G-SDI. That's 16 channels of conversion in a single rack unit! The SMPTE-2110 connections use two 100G Ethernet ports for full SMPTE-2022-7 redundancy. There is also a separate NMOS control Ethernet port and dual redundant AC power supplies for reliable broadcast operation.Connections100G 2110 IP Networks: 2x 100G QSFP28 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networksSenders and Receivers per 100G Pair: 8x Ultra HD or HD1G Control Network: 1x 1G RJ45 for NMOS control, configuration and firmware updatesSDI Video Inputs: 8SDI Video Outputs: 8SDI Rates: 1.5G, 3G, 6G, 12GSDI Audio Inputs: 16 Ch embedded audio on SDI inputsSDI Audio Outputs: 16 Ch embedded audio on SDI outputsSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on each 2110 IP video stream over 100G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on each 2110 IP video stream over 100G EthernetAnalog Audio Outputs: 1x 6.35 mm headphone jackPower: 2x IEC C14 power inputs

Blackmagic StudioBridge 100GSKU: BM-CONVNVIPR/SBD100X2 The Blackmagic StudioBridge 100G bridges a single 100G Ethernet SMPTE-2110 connection into a redundant dual 100G Ethernet broadcast system. It also has two 100G Ethernet camera connections that can be combined if total bandwidth doesn't exceed 100 Gb/s! This lets you interface two cameras such as the URSA Cine 12K 100G into a redundant broadcast system. It also includes a separate 10G Ethernet channel for accessories, an NMOS control port, and dual redundant power supplies.Connections100G 2110 IP Networks: 2x 100G QSFP28 Network connections. Supports ST 2022-7 redundant delivery of IP streams over the two ‘100G 2110 IP Video’ network connections100G 2110 IP Camera: 2x 100G QSFP28 Camera connectionsSenders and Receivers per 100G Pair: 1x 100G URSA Cine or 2x URSA Cine Immersive / URSA Immersive10G 2110 IP Networks: 2x 10G SFP optical fiber connections. 2 x 10G RJ45 connectionsSenders and Receivers per 100G Pair: 8x Ultra HD or HD1G Control Network: 1x 1G RJ45 for NMOS control, configuration and software updatesSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on each 2110 IP video stream over 100G and 10G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on each 2110 IP video stream over 100G and 10G EthernetMulti Rate Support: Auto detection of HD, Ultra HD and 4KComputer Interface: 1x USB-C for configuration and firmware updatesPower: 2x IEC C14 power inputs

Blackmagic StudioBridge 10G PWRSKU: BM-CONVNVIPR/SBB10X8P The Blackmagic StudioBridge 10G PWR is designed to bridge low-cost single link 10G Ethernet SMPTE-2110 connections into high-end redundant 100G Ethernet based systems. It converts and combines 8 channels of 10G Ethernet into a redundant pair of 100G Ethernet connections. That means you can plug in 8 separate 10G Ethernet Ultra HD devices. Each 10G Ethernet port has a massive 90W of PoE++ power, so you can power equipment such as converters and cameras directly from their Ethernet connections!Connections100G 2110 IP Networks: 2x 100G QSFP28 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networks10G 2110 IP Networks: 8x 10G PoE++ RJ45 connectionsSenders and Receivers per 100G Pair: 8x Ultra HD or HD1G Control Network: 1x RJ45 for NMOS control, configuration and software updatesSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on each 2110 IP video stream over 100G and 10G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on each 2110 IP video stream over 100G and 10G EthernetMulti Rate Support: Auto detection of HD and Ultra HDComputer Interface: 1x USB-C for configuration and firmware updatesPower: 2x IEC C14 power inputs

Blackmagic Teranex Mini SDI to HDMI 12G SKU: CONVNTRM-AA-SDIH Introducing Teranex Mini, the next generation 12G-SDI converters with award winning Teranex quality and support for all SD, HD and Ultra HD formats up to 2160p60! All Teranex Minis include an internal AC power supply, professional XLR analog and AES/EBU audio connections and an ethernet connection for remote management and PoE alternate power! Teranex Mini features a user upgradable front panel that includes a color display and user controls so you can quickly monitor video and change settings right from the front of the converter! You get all of the same great features of regular mini converters and so much more! Blackmagic Teranex Mini SDI to HDMI 12G convert from 12G-SDI to HDMI. Supports all video formats including SD, HD, 6G and 12G-SDI rates and includes down converter when working with a HDMI monitor, which will select the best format it can support. De-embed audio to balanced analog or AES/EBU formats and timecode output. Also includes Instant Lock on HDMI output as well as 33 point LUT. Perfect for using HDMI televisions as SDI broadcast monitors and for connecting to video projectors.

Blackmagic UpDownCross 100GSKU: CONVNVIPJ/STG/100G The Blackmagic UpDownCross 100G is a powerful 8-channel standards converter with native SMPTE-2110 connections via 100G Ethernet. It converts up to 8 separate channels of SD, HD and Ultra HD video to any other standard simultaneously. The professional 1RU design features front-to-back cooling that's very quiet! It also includes redundant 100G Ethernet for full SMPTE-2022-7 compliance, dual redundant AC power supplies and a separate NMOS control port for connecting to control networks!The Blackmagic UpDownCross 100G is a powerful 8-channel standards converter with native SMPTE-2110 connections via 100G Ethernet. It converts up to 8 separate channels of SD, HD and Ultra HD video to any other standard simultaneously. The professional 1RU design features front-to-back cooling that's very quiet! It also includes redundant 100G Ethernet for full SMPTE-2022-7 compliance, dual redundant AC power supplies and a separate NMOS control port for connecting to control networks!Connections100G 2110 IP Networks: 2 x 100G QSFP28 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networksSenders and Receivers per 100G Camera: 8x Ultra HD or HD1G Control Network: 1x 1G RJ45 for NMOS control, configuration and firmware updatesSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on each 2110 IP video stream over 100G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on each 2110 IP video stream over 100G EthernetAnalog Audio Outputs: 1x 6.35 mm headphone jackComputer Interface: 1x USB-C for configuration and firmware updatesPower: 2x IEC C14 power inputs.

Blackmagic URSA Cine 12K LF 100G This powerful Blackmagic URSA Cine 12K 100G model has a much faster 100G Ethernet port for SMPTE-2110 live video at incredibly high frame rates. With the new B4 lens mount for broadcast lenses, it can deliver up to 440fps! Your main cameras can also be high-frame-rate cameras, perfect for live sports and replay. You still get the large format RGBW 36x24mm sensor and 16 stops of dynamic range. It also works with the new URSA Cine Studio Viewfinder for a complete studio camera solution. Camera FeaturesEffective Sensor Size: 35.64mm x 23.32mm (Large Format)Pixel Pitch: 2.9 micronsLens Mount: URSA Cine lockable EF mount. Interchangeable with optional URSA Cine PL mountLens Control: Lens control of compatible EF lenses. Lens data from compatible PL lenses and control of some PL lensesDynamic Range: 16 StopsShooting Formats12,288 x 8040 (12K 3:2 open gate)12,288 x 6912 (12K 16:9)12,288 x 6480 (12K 17:9)12,288 x 5112 (12K 2.4:1)9648 x 8040 (12K 6:5)9408 x 6264 (9K 3:2)8688 x 4896 (9K 16:9)9312 x 4896 (9K 17:9)9312 x 3864 (9K 2.4:1)7680 x 6408 (9K 6:5)8192 x 5360 (8K 3:2 open gate)8192 x 4608 (8K 16:9)8192 x 4320 (8K 17:9)8192 x 3408 (8K 2.4:1)6432 x 5360 (8K 6:5)4608 x 2592 (4.6K 16:9 B4 crop)4096 x 2680 (4K 3:2 open gate)4096 x 2304 (4K 16:9)4096 x 2160 (4K 17:9)4096 x 1704 (4K 2.4:1)3216 x 2680 (4K 6:5)Frame Rates: >Project frame rates of 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 fps supported. Maximum sensor frame rate dependent on resolution selectedHigh Speed Frame Rates12K 3:2 open gate up to 80 fps12K 17:9 up to 100 fps12K 2.4:1 up to 120 fps9K 3:2 Super 35 up to 100 fps8K / 4K 3:2 open gate up to 144 fps =8K / 4K 2.4:1 up to 224 fps4.6K B4 crop 16:9 up to 240 fpsBuilt in ND Filters: Button activated ND filters with clear, 2-stop, 4-stop and 6-stop IR ND filtersFocus: Focus button turns on peaking, auto focus available using compatible lensesIris Control: Iris wheel and touchscreen slider for manual iris adjustment on electronically controllable lenses, iris button for instant auto iris settings on compatible lenses so no pixel is clipped in film mode. Scene average auto exposure in video modeScreens: 2x Monitoring Screens, 1x Camera Status ScreenMonitoring Screen Dimensions: 5 inchMonitoring Screen Resolution: 1920px x 1080pxMonitoring Screen Brightness: 1500 nitsMonitoring Screen Type: LCD capacitive touchscreenMetadata Support: Automatically populated lens data from compatible EF lenses. Automatic recording of camera settings and slate data such as project, scene number, take and special notesControls: Touchscreen menus on 5 inch screen. Push buttons for other controls. 6 assignable shortcut keys plus 6 assignable viewfinder shortcut keys on optional URSA Cine EVFTimecode Clock: Highly accurate timecode clock. Less than 1 frame drift every 8 hours ConnectionsTotal Video Outputs: 3SDI Video Outputs: 2SDI Rates: 1.5G, 3G, 6G, 12G100G 2110 IP Networks: 1x 100G QSFP28 connection2110 IP Video Outputs: 1x 100G QSFP28 connection2110 IP Video Inputs: 1x 100G QSFP28 connectionSenders and Receivers per 100G: 1x Ultra HDAnalog Audio Inputs: 2x XLR analog switchable between mic, line and AES audio. Phantom power support. 1x 3.5mm headset jackAnalog Audio Outputs: 1x 3.5mm headset jackReference Inputs: Tri-Sync/Black Burst and Timecode. PTP clock and timecode over 2110 IP networkViewfinder: 1x Viewfinder USB-C with video, power, camera control data and locking connector. Works with URSA Cine EVF and PYXIS MonitorUSB-C Monitor Outputs: 2x USB-C side monitor ports support URSA Cine EVF, PYXIS Monitor or DisplayPort monitorsAccessories: 1x 7-pin Lemo ‘EXT’ for power out, serial communication, and run/stop / 1x 3-pin Fischer ‘RS’ for power out and run/stopComputer Interface: 2x USB-C side expansion ports for camera accessories. Software updates using side USB‑C closer to rearEthernet: 1x 100Gb/s QSFP28 connector for sending and receiving 2110 IP video or SMB file sharing, Web Media Management, Blackmagic Cloud uploads, camera control and streamingPower: 1x 8-pin Lemo compatible +24V DC power input. In the boxBM-CINEURSAAB12KLFABDY1Blackmagic URSA Cine 12K LF 100G camera with EF lens mountBlackmagic Media Module CFBlackmagic URSA Cine Rubber Caps for connectorsBlackmagic URSA Cine WiFi AntennasBlackmagic EF Body CapDaVinci Resolve Studio with activation keyWelcome wallet with QR code for software download BM-CINEURSAAB12KLFB1Blackmagic URSA Cine 12K LF 100G camera with PL lens mountBlackmagic Media Module 8TBBlackmagic URSA Cine Handle and boltsBlackmagic URSA Cine Top Rod MountBlackmagic URSA Cine Baseplate 19Blackmagic URSA Cine Battery Plate B MountBlackmagic URSA Cine Rubber Caps for connectorsBlackmagic URSA Cine WiFi AntennasBlackmagic URSA Cine Mount EF and mount screwsBlackmagic URSA Cine 24V 250W power supplyBlackmagic EF Body CapBlackmagic PL Body CapPlastic folding screen hood for 5” LCDDaVinci Resolve Studio with activation keyWelcome wallet with QR code for software downloadBlackmagic StickerPelican 1510 Case with custom foam BM-CINEURSAAB12KLFCEVF1Blackmagic URSA Cine 12K LF 100G camera with PL lens mountBlackmagic Media Module 8TBBlackmagic URSA Cine Handle and boltsBlackmagic URSA Cine Top Rod MountBlackmagic URSA Cine Baseplate 19Blackmagic URSA Cine Battery Plate B MountBlackmagic URSA Cine Rubber Caps for connectorsBlackmagic URSA Cine WiFi AntennasBlackmagic URSA Cine Mount EF and mount screwsBlackmagic URSA Cine 24V 250W power supplyBlackmagic EF Body CapBlackmagic PL Body CapPlastic folding screen hood for 5” LCDDaVinci Resolve Studio with activation keyWelcome wallet with QR code for software downloadBlackmagic StickerPelican 1510 Case with custom foam

Blackmagic URSA Cine 12K LF 100G This powerful Blackmagic URSA Cine 12K 100G model has a much faster 100G Ethernet port for SMPTE-2110 live video at incredibly high frame rates. With the new B4 lens mount for broadcast lenses, it can deliver up to 440fps! Your main cameras can also be high-frame-rate cameras, perfect for live sports and replay. You still get the large format RGBW 36x24mm sensor and 16 stops of dynamic range. It also works with the new URSA Cine Studio Viewfinder for a complete studio camera solution. Camera FeaturesEffective Sensor Size: 35.64mm x 23.32mm (Large Format)Pixel Pitch: 2.9 micronsLens Mount: URSA Cine lockable EF mount. Interchangeable with optional URSA Cine PL mountLens Control: Lens control of compatible EF lenses. Lens data from compatible PL lenses and control of some PL lensesDynamic Range: 16 StopsShooting Formats12,288 x 8040 (12K 3:2 open gate)12,288 x 6912 (12K 16:9)12,288 x 6480 (12K 17:9)12,288 x 5112 (12K 2.4:1)9648 x 8040 (12K 6:5)9408 x 6264 (9K 3:2)8688 x 4896 (9K 16:9)9312 x 4896 (9K 17:9)9312 x 3864 (9K 2.4:1)7680 x 6408 (9K 6:5)8192 x 5360 (8K 3:2 open gate)8192 x 4608 (8K 16:9)8192 x 4320 (8K 17:9)8192 x 3408 (8K 2.4:1)6432 x 5360 (8K 6:5)4608 x 2592 (4.6K 16:9 B4 crop)4096 x 2680 (4K 3:2 open gate)4096 x 2304 (4K 16:9)4096 x 2160 (4K 17:9)4096 x 1704 (4K 2.4:1)3216 x 2680 (4K 6:5)Frame Rates: >Project frame rates of 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 fps supported. Maximum sensor frame rate dependent on resolution selectedHigh Speed Frame Rates12K 3:2 open gate up to 80 fps12K 17:9 up to 100 fps12K 2.4:1 up to 120 fps9K 3:2 Super 35 up to 100 fps8K / 4K 3:2 open gate up to 144 fps =8K / 4K 2.4:1 up to 224 fps4.6K B4 crop 16:9 up to 240 fpsBuilt in ND Filters: Button activated ND filters with clear, 2-stop, 4-stop and 6-stop IR ND filtersFocus: Focus button turns on peaking, auto focus available using compatible lensesIris Control: Iris wheel and touchscreen slider for manual iris adjustment on electronically controllable lenses, iris button for instant auto iris settings on compatible lenses so no pixel is clipped in film mode. Scene average auto exposure in video modeScreens: 2x Monitoring Screens, 1x Camera Status ScreenMonitoring Screen Dimensions: 5 inchMonitoring Screen Resolution: 1920px x 1080pxMonitoring Screen Brightness: 1500 nitsMonitoring Screen Type: LCD capacitive touchscreenMetadata Support: Automatically populated lens data from compatible EF lenses. Automatic recording of camera settings and slate data such as project, scene number, take and special notesControls: Touchscreen menus on 5 inch screen. Push buttons for other controls. 6 assignable shortcut keys plus 6 assignable viewfinder shortcut keys on optional URSA Cine EVFTimecode Clock: Highly accurate timecode clock. Less than 1 frame drift every 8 hours ConnectionsTotal Video Outputs: 3SDI Video Outputs: 2SDI Rates: 1.5G, 3G, 6G, 12G100G 2110 IP Networks: 1x 100G QSFP28 connection2110 IP Video Outputs: 1x 100G QSFP28 connection2110 IP Video Inputs: 1x 100G QSFP28 connectionSenders and Receivers per 100G: 1x Ultra HDAnalog Audio Inputs: 2x XLR analog switchable between mic, line and AES audio. Phantom power support. 1x 3.5mm headset jackAnalog Audio Outputs: 1x 3.5mm headset jackReference Inputs: Tri-Sync/Black Burst and Timecode. PTP clock and timecode over 2110 IP networkViewfinder: 1x Viewfinder USB-C with video, power, camera control data and locking connector. Works with URSA Cine EVF and PYXIS MonitorUSB-C Monitor Outputs: 2x USB-C side monitor ports support URSA Cine EVF, PYXIS Monitor or DisplayPort monitorsAccessories: 1x 7-pin Lemo ‘EXT’ for power out, serial communication, and run/stop / 1x 3-pin Fischer ‘RS’ for power out and run/stopComputer Interface: 2x USB-C side expansion ports for camera accessories. Software updates using side USB‑C closer to rearEthernet: 1x 100Gb/s QSFP28 connector for sending and receiving 2110 IP video or SMB file sharing, Web Media Management, Blackmagic Cloud uploads, camera control and streamingPower: 1x 8-pin Lemo compatible +24V DC power input. In the boxBM-CINEURSAAB12KLFABDY1Blackmagic URSA Cine 12K LF 100G camera with EF lens mountBlackmagic Media Module CFBlackmagic URSA Cine Rubber Caps for connectorsBlackmagic URSA Cine WiFi AntennasBlackmagic EF Body CapDaVinci Resolve Studio with activation keyWelcome wallet with QR code for software download BM-CINEURSAAB12KLFB1Blackmagic URSA Cine 12K LF 100G camera with PL lens mountBlackmagic Media Module 8TBBlackmagic URSA Cine Handle and boltsBlackmagic URSA Cine Top Rod MountBlackmagic URSA Cine Baseplate 19Blackmagic URSA Cine Battery Plate B MountBlackmagic URSA Cine Rubber Caps for connectorsBlackmagic URSA Cine WiFi AntennasBlackmagic URSA Cine Mount EF and mount screwsBlackmagic URSA Cine 24V 250W power supplyBlackmagic EF Body CapBlackmagic PL Body CapPlastic folding screen hood for 5” LCDDaVinci Resolve Studio with activation keyWelcome wallet with QR code for software downloadBlackmagic StickerPelican 1510 Case with custom foam BM-CINEURSAAB12KLFCEVF1Blackmagic URSA Cine 12K LF 100G camera with PL lens mountBlackmagic Media Module 8TBBlackmagic URSA Cine Handle and boltsBlackmagic URSA Cine Top Rod MountBlackmagic URSA Cine Baseplate 19Blackmagic URSA Cine Battery Plate B MountBlackmagic URSA Cine Rubber Caps for connectorsBlackmagic URSA Cine WiFi AntennasBlackmagic URSA Cine Mount EF and mount screwsBlackmagic URSA Cine 24V 250W power supplyBlackmagic EF Body CapBlackmagic PL Body CapPlastic folding screen hood for 5” LCDDaVinci Resolve Studio with activation keyWelcome wallet with QR code for software downloadBlackmagic StickerPelican 1510 Case with custom foam

Blackmagic URSA Cine 12K LF 100G This powerful Blackmagic URSA Cine 12K 100G model has a much faster 100G Ethernet port for SMPTE-2110 live video at incredibly high frame rates. With the new B4 lens mount for broadcast lenses, it can deliver up to 440fps! Your main cameras can also be high-frame-rate cameras, perfect for live sports and replay. You still get the large format RGBW 36x24mm sensor and 16 stops of dynamic range. It also works with the new URSA Cine Studio Viewfinder for a complete studio camera solution. Camera FeaturesEffective Sensor Size: 35.64mm x 23.32mm (Large Format)Pixel Pitch: 2.9 micronsLens Mount: URSA Cine lockable EF mount. Interchangeable with optional URSA Cine PL mountLens Control: Lens control of compatible EF lenses. Lens data from compatible PL lenses and control of some PL lensesDynamic Range: 16 StopsShooting Formats12,288 x 8040 (12K 3:2 open gate)12,288 x 6912 (12K 16:9)12,288 x 6480 (12K 17:9)12,288 x 5112 (12K 2.4:1)9648 x 8040 (12K 6:5)9408 x 6264 (9K 3:2)8688 x 4896 (9K 16:9)9312 x 4896 (9K 17:9)9312 x 3864 (9K 2.4:1)7680 x 6408 (9K 6:5)8192 x 5360 (8K 3:2 open gate)8192 x 4608 (8K 16:9)8192 x 4320 (8K 17:9)8192 x 3408 (8K 2.4:1)6432 x 5360 (8K 6:5)4608 x 2592 (4.6K 16:9 B4 crop)4096 x 2680 (4K 3:2 open gate)4096 x 2304 (4K 16:9)4096 x 2160 (4K 17:9)4096 x 1704 (4K 2.4:1)3216 x 2680 (4K 6:5)Frame Rates: >Project frame rates of 23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 fps supported. Maximum sensor frame rate dependent on resolution selectedHigh Speed Frame Rates12K 3:2 open gate up to 80 fps12K 17:9 up to 100 fps12K 2.4:1 up to 120 fps9K 3:2 Super 35 up to 100 fps8K / 4K 3:2 open gate up to 144 fps =8K / 4K 2.4:1 up to 224 fps4.6K B4 crop 16:9 up to 240 fpsBuilt in ND Filters: Button activated ND filters with clear, 2-stop, 4-stop and 6-stop IR ND filtersFocus: Focus button turns on peaking, auto focus available using compatible lensesIris Control: Iris wheel and touchscreen slider for manual iris adjustment on electronically controllable lenses, iris button for instant auto iris settings on compatible lenses so no pixel is clipped in film mode. Scene average auto exposure in video modeScreens: 2x Monitoring Screens, 1x Camera Status ScreenMonitoring Screen Dimensions: 5 inchMonitoring Screen Resolution: 1920px x 1080pxMonitoring Screen Brightness: 1500 nitsMonitoring Screen Type: LCD capacitive touchscreenMetadata Support: Automatically populated lens data from compatible EF lenses. Automatic recording of camera settings and slate data such as project, scene number, take and special notesControls: Touchscreen menus on 5 inch screen. Push buttons for other controls. 6 assignable shortcut keys plus 6 assignable viewfinder shortcut keys on optional URSA Cine EVFTimecode Clock: Highly accurate timecode clock. Less than 1 frame drift every 8 hours ConnectionsTotal Video Outputs: 3SDI Video Outputs: 2SDI Rates: 1.5G, 3G, 6G, 12G100G 2110 IP Networks: 1x 100G QSFP28 connection2110 IP Video Outputs: 1x 100G QSFP28 connection2110 IP Video Inputs: 1x 100G QSFP28 connectionSenders and Receivers per 100G: 1x Ultra HDAnalog Audio Inputs: 2x XLR analog switchable between mic, line and AES audio. Phantom power support. 1x 3.5mm headset jackAnalog Audio Outputs: 1x 3.5mm headset jackReference Inputs: Tri-Sync/Black Burst and Timecode. PTP clock and timecode over 2110 IP networkViewfinder: 1x Viewfinder USB-C with video, power, camera control data and locking connector. Works with URSA Cine EVF and PYXIS MonitorUSB-C Monitor Outputs: 2x USB-C side monitor ports support URSA Cine EVF, PYXIS Monitor or DisplayPort monitorsAccessories: 1x 7-pin Lemo ‘EXT’ for power out, serial communication, and run/stop / 1x 3-pin Fischer ‘RS’ for power out and run/stopComputer Interface: 2x USB-C side expansion ports for camera accessories. Software updates using side USB‑C closer to rearEthernet: 1x 100Gb/s QSFP28 connector for sending and receiving 2110 IP video or SMB file sharing, Web Media Management, Blackmagic Cloud uploads, camera control and streamingPower: 1x 8-pin Lemo compatible +24V DC power input. In the boxBM-CINEURSAAB12KLFABDY1Blackmagic URSA Cine 12K LF 100G camera with EF lens mountBlackmagic Media Module CFBlackmagic URSA Cine Rubber Caps for connectorsBlackmagic URSA Cine WiFi AntennasBlackmagic EF Body CapDaVinci Resolve Studio with activation keyWelcome wallet with QR code for software download BM-CINEURSAAB12KLFB1Blackmagic URSA Cine 12K LF 100G camera with PL lens mountBlackmagic Media Module 8TBBlackmagic URSA Cine Handle and boltsBlackmagic URSA Cine Top Rod MountBlackmagic URSA Cine Baseplate 19Blackmagic URSA Cine Battery Plate B MountBlackmagic URSA Cine Rubber Caps for connectorsBlackmagic URSA Cine WiFi AntennasBlackmagic URSA Cine Mount EF and mount screwsBlackmagic URSA Cine 24V 250W power supplyBlackmagic EF Body CapBlackmagic PL Body CapPlastic folding screen hood for 5” LCDDaVinci Resolve Studio with activation keyWelcome wallet with QR code for software downloadBlackmagic StickerPelican 1510 Case with custom foam BM-CINEURSAAB12KLFCEVF1Blackmagic URSA Cine 12K LF 100G camera with PL lens mountBlackmagic Media Module 8TBBlackmagic URSA Cine Handle and boltsBlackmagic URSA Cine Top Rod MountBlackmagic URSA Cine Baseplate 19Blackmagic URSA Cine Battery Plate B MountBlackmagic URSA Cine Rubber Caps for connectorsBlackmagic URSA Cine WiFi AntennasBlackmagic URSA Cine Mount EF and mount screwsBlackmagic URSA Cine 24V 250W power supplyBlackmagic EF Body CapBlackmagic PL Body CapPlastic folding screen hood for 5” LCDDaVinci Resolve Studio with activation keyWelcome wallet with QR code for software downloadBlackmagic StickerPelican 1510 Case with custom foam

Blackmagic URSA Cine Mount B4SKU: CINEURSABMNTB4Lens mount for Blackmagic URSA Cine 12K cameras allows incredible quality B4 broadcast lenses to be used for live production. Features optics specifically designed to match the URSA Cine RGBW sensor.

Blackmagic URSA Cine Studio ViewfinderSKU: CINEURSAB/EVFST7Blackmagic URSA Cine Studio Viewfinder is a large 7″ HDR touchscreen viewfinder with full camera control, designed for use with URSA Cine in live production environments. It combines a high brightness HDR touchscreen with custom function buttons and physical knobs for brightness, contrast and focus peaking. On screen overlays include focus peaking, frame guides, histograms and more, with full touchscreen access to all camera settings. Includes removable sunshade and connects via a single USB-C cable for video, power and camera control.ConnectionsUSB-C with Locking Connector: Video, power, metadata, camera control and software updatesScreen Dimensions: 7'' 1920 x 1200 resolutionScreen Type: 7'' high brightness TFT LCDScreen Brightness: 2000 nitsPower: 5.5mm barrel power input for external +12V DC powerFeaturesDisplay Size: 7 inchDisplay Resolution: 1920px x 1200pxDisplay Type: LCD capacitive touchscreenDisplay Brightness: 2000 nitsFrame Rates: Up to 60fpsHandles: Built in grab handles for positioning the monitor independently from the cameraPosition Adjustment Options: Articulated yoke with variable tension pivots and grab handles for forward, backward, up, down, pan and tilt adjustmentsSunshade: Detachable and foldable sunshadeMounting Options: Quick release V-lock mounting bracket for attaching viewfinder to URSA Cine 12K bodyTally: Large talent facing LED tally light with customizable perspex camera numbersMetadata Support: Viewfinder supports all camera metadata and full Blackmagic OS camera Control

Camgear Terra III PedestalSKU: CMG-TERRA-III Camgear Terra III Pedestal delivers optimal support for Studio and OB. Payload up to 80 kg. Features2-stage with payload up to 80 kgSmooth and precise on-air movement with on shot stroke length of 73.5 cmCapable of doing the shot at close range with seated or standing eyeline positionEasily and securely build up (or down) your camera package with the build/transport lockCrab and steer modes for tight spaces or on shot direction changesAdjustable cable guardHeavy-duty speedlock adaptor for easy and quick setup of the fluid head Technical dataPayload: 80 kgSteering Ring Diameter: 62.5 cWheel Diameter: 12.5 cmWeight: 67.5 kgStages: 2Perfect Balance Stages: 2On Shot Stroke: 73.5 cmSteering: Crab & SteerHeight: 68.5 - 142 cmTracking Width: 79 cm

camRade audioMate 2 SKU: CAM-AUMATE-2 The camRade audioMate 2 is a 1000 denier Cordura nylon bag designed to carry and protect many audio mixers or recorders. It has a padded foam interior with reinforced plastic sided. The bag has a detachable front pocket and 2 fixed pockets for microphones, cables and batteries. Main compartment holds the audio mixer and interior dividers. There are ports between the compartments to pass the cables through. It has clear vinyl covers with a touch fastener on top of the bag that protects the equipment, while allowing view of the controls. The camRade audioMate 2 bag is carried by a removable, adjustable shoulder strap or an optional audio harness. There are rings on top for the shoulder strap or harness and rings on the bottom to fix the harness-belt. Exterior (L x W x H) 60 cm x 24 cm x 22 cmInterior (L x W x H) 40 cm x 14 x cm x 20 cmWeight 1.5 kg

Camrade SnowCoat 3 SKU: CAM-SC-3 Camrade’s highly insulated, thermal Camrade SnowCoat 3 keeps your camera, batteries, lens and hands warm, even at extremely low temperatures. The use of the snowCoat down to -49° C has been successfully tested! Built-in heat packs maintain the high internal temperature for more than 6 hours, while keeping your hands warm at the same time. The snowCoat is made with a tough nylon shell and a supple velvet lining, and has full interior padding with insulation. The snowCoats was insulated with a compressed mineral wool sandwiched in aluminum layers. The LCD screen monitor has an integrated protector, and a cuff designed especially for operating the lens. Weight: 1.5 kg

camRade wetSuit AU-EVA1 The camRade wetSuit AU-EVA1 is a flexible waterresistant rain cover, made of black soft fabric, that protects your camera against the elements. It also covers the viewfinder, microphone and other accessories supplied with the camera. The wetSuit AU-EVA1 is designed specifically for the Panasonic AU-EVA1 cinema camera. The near silent fabric minimalizes unwanted sound effects caused by wind and rain and reduces the chance of the camera overheating by allowing hot air to escape via the openings in the cover. The WS AU-EVA1 has clear vinyl windows for visibility when adjusting the menu, audio input select level or other controls. The cover can be closed off on the bottom with zippers and can therefore be partly opened up for attachment to a tripod. The viewfinder monitor is completely covered by the fabric and a vinyl window, so no water will come into the suit during use. This item will be delivered to you in a waterproof pouch with zipper, which you can use for storing and transportation of the cover when not in active use.wetSuit AU-EVA1 Features Form-fitted for the Panasonic AU-EVA1 camcorderTailor-made of waterproof near silent fabri Protection against bad weather conditionsFull access to the controls, ports, memory cards, display, zoom and battery compartmentStrong Easy-on-Easy-off construction with hook and loop fasteners2 sizes transparent lens covers (small and large)Handmade in France, Europe5 Year warranty In the box 1 x wetSuit AU-EVA11 x Separate viewfinder cover2 x Transparent lens covers1 x Waterproof storage pouch with zipper

camRade wetSuit VENICE SKU: CAM-WS-VENICE As usability and reliability is one the major concerns for operators, especially in tough or time critical filming conditions. Using the Sony VENICE CineAlta you can simply concentrate on filming and not worry about anything else. The design of the camRade wetSuit VENICE helps facilitate this too. This camRade rain cover is made of water-resistant fabric with a soft lining that minimalizes unwanted sound effects during operation. It also reduces the chance of the camera overheating by allowing hot air to escape via vents and openings. Due to many smart openings the DoP can use the cover around the desired configuration of the camera. Multiple zippers on the bottom allow easy mounting on a tripod or pedestal while still protected from water splashing up. The wetSuit is supplied with clear protection covers for a normal and a long lens, making sure that any lens you might use will be well protected. When the lens is shorter than the cover this can be folded back to the correct size. Full access and visibility during use is guaranteed by the several clear vinyl windows, which can be easily opened and closed with hook and loop fasteners. This item will be delivered to you in a waterproof pouch with zipper, which you can use for storage and transportation of the cover. Key features Form-fitted for the Sony VENICE CineAlta camerasTailor-made of water-resistant fabric with soft liningProtection against bad weather conditionsFull access to the controls, ports, memory cards, display, zoom and battery compartmentStrong Easy-on-Easy-off construction with hook and loop fasteners and YKK® zippersSeparate cover for viewfinderSeparate covers for long and short lensesHandmade in France, Europe5 Year warranty

F&V R720 The F&V R720 Lumic has a 290mm center opening that allows it to be used with any size cinema lens. Mounting options for 15mm LWS and 19mm Studio ensure that the R720 will seamlessly integrate into your professional, cinema work flow. A 5/8" mounting option allows you to attach the R720 to a stand which is ideally suited for photographers. Reap all the benefits the F&V R720 has to offer. When you're not in need of a ring light, the incredible power of the 720 LEDs allows you to use the light off camera as a standalone LED fixture. A soft box accessory allows you to shape and soften your light for a wide variety of applications. Additionally, the unit can be powered by two, NP-F Li-ion batteries which means you can take it anywhere you go. Due to its large size, the R720 not only creates gorgeous catchlights in the eyes of your talent, but also it wraps around their face with even, beautiful illumination. The R720 does not come standard with Independent Quadrant Control. In order to unlock this feature, as well as WiFi control, you must upgrade the control module on your R720 In the box 1 x R720 Lumic LED Ring Light1 x 5/8" Mount1 x Tungsten Filter (Daylight Model Only)1 x Frost Diffusion Filter1 x D-Tap Power Cable1  x Carry Bag Technical data Correlated Color Temperature 5600K DaylightColor Rendering Index 85-90 Illumination Lux@1m / Lumen 100% Daylight:5470 lx / 4718 lm 100% Tungsten:N/A50% Daylight + 50% Tungsten:N/A Power Draw 50.82 W MaxOperating Voltage 10 - 18V DCNominal Weight 1.15 kgPower Supply 2x Sony NP-F Li-ion battery; DC 2.5 JackBattery Lifetime 65 mins @ 2*4800mAh NP-F750 

F&V R720SThe F&V R720S Lumic has a 290mm center opening that allows it to be used with any size cinema lens. Mounting options for 15mm LWS and 19mm Studio ensure that the R720 will seamlessly integrate into your professional, cinema work flow. A 5/8" mounting option allows you to attach the R720 to a stand which is ideally suited for photographers. Reap all the benefits the R720 has to offer. When you're not in need of a ring light, the incredible power of the 720 LEDs allows you to use the light off camera as a standalone LED fixture. A soft box accessory allows you to shape and soften your light for a wide variety of applications. Additionally, the unit can be powered by two, NP-F Li-ion batteries which means you can take it anywhere you go. Due to its large size, the F&V R720S not only creates gorgeous catchlights in the eyes of your talent, but also it wraps around their face with even, beautiful illumination. The R720 does not come standard with Independent Quadrant Control. In order to unlock this feature, as well as WiFi control, you must upgrade the control module on your R720 In the box 1 x R720S Lumic LED Ring Light1 x 5/8" Mount1 x Frost Diffusion Filter1 x D-Tap Power Cable1 x Carry Bag Technical data Correlated Color Temperature 3200 - 5600K Bi-colorColor Rendering Index 85-90  Illumination Lux@1m / Lumen100% Daylight:2554 lx / 2466 lm 100% Tungsten:2087 lx / 2137 lm50% Daylight + 50% Tungsten:4632 lx / 4584 lm Power Draw 50.82 W MaxOperating Voltage 10 - 18V DCNominal Weight 1.16 kgPower Supply 2x Sony NP-F Li-ion battery; DC 2.5 JackBattery Lifetime 65 mins @ 2*4800mAh NP-F750 

F&V Z180 The Z180 5600K LED Light Panel features 180 daylight-balanced LED that deliver a bright yet soft, pure-color beam of 1460lx light output. This light comes with 2 magnetic filters 1 x tungsten filter that balances your light to 3200K1 x diffusion filterThis light is dimmable from 0-100%. This F&V light has several powering options. It can be powered by its built-in battery plate with a Sony NP-F type battery, by its built in battery compartment with six (6) AA-batteries, or by an external power source via its DCΦ2.5 jack. Multiple Z180 units can be linked together via its Expandable Link System, a mortis and tenon attachment system. The lights can mount horizontally or vertically to one another. This linking system makes it easier to transport your lights and is a perfect solution for projects on-location, where carrying large sized lights becomes impractical. When the lights are linked together, the SmartSync Control Circuit allows you to control the intensity of all lights with only one of the light’s dimmer knobs. When the knob of the parent-light is adjusted, all connected lights match the intensity of the parent-light. The versatility of this light will make it a necessity to have in your lighting kit. This light is compact in size allowing for it to fit into small areas, yet with its Expandable Link System, this light can be both big and small. In the box 1 x Z180S 5600K LED Light Panel1 x Kai Arm - 102090071 x Z180 Magnetic Tungsten Filter - 332126211 x Z180 Magnetic Diffusion Filter  - 332126221 x Operation Manual1 x Warranty Card Z180 Technical data Bulb Power LEDLED Count 180Light Beam Angle 65°Illuminance1460 lxPower Variation 0-100%Color Rending Index (Ra)≥ 85%Correlated Color Temperature (CCT) 5600K (3200K w/ Tungsten Filter)Operating Voltage DC 5.8-16.8VPower Options Built-in Sony NP-F Battery Plate, 6x AA Batteries, or DCΦ2.5 jackLasting Time 60mins with NP-F550, 37mins with AA BatteryMounting ¼"-20 Female Thread; Kai Arm included in kitNominal Weight 482 g (without filters)Nominal Dimensions 17.3 x 11.3 x5 (cm)

Godox SL200RF Full-Color LED LightPaletteLab color technology provides full-spectrum performance across the entire visible wavelength range. It is much more than just a simple combination of light sources; it is a comprehensive spectral solution that enables precise color control at the nanometer level - for light that appears exactly as you imagine.Thanks to the continuous full spectrum output, the SL200 RF reproduces colors and textures particularly realistically. The light is very close to natural daylight and what the human eye sees on set. With high SSI values of 87, the lamp captures more detailed color information and offers productions an optimal starting point for color grading.With a wide CCT range from 1800K to 10000K, the GODOX SL200 RF covers everything from the warm amber glow of tungsten light to clear, cool whites. The color reproduction remains precise across the entire range, so the image remains true to the creative vision on set.With 92% coverage of the Rec.2020 color space, the SL200 RF delivers colored light with controlled saturation and precise color tone reproduction. With HSL adjustment, colors blend smoothly into one another, without annoying gradations or banding effects. FeaturesGeneralFor Film, Broadcast & Video ProductionOutput: 72,900 Lux at 1m w/ ReflectorOnboard, DMX & App Control; NFC FunctionCRI 98 | TLCI 9914 Lighting EffectsFan CooledBowens MountDisplay: YesEnvironmental Resistance: NoOperating Conditions: -20 to 40°CLight FixtureItem Type: 1x LED MonolightIncluded Light Modifier: 1x ReflectorIncluded Storage Case: NoColor Temperature: 1800 to 10,000KColor Modes: RGB, Daylight, TungstenColor Accuracy Standard: CRI 98, TLCI 99Dimming: App-Controlled / Built-In Dimmer / DMX / RDM • 0 to 100%Cooling System: FanBuilt-In Flash: NoPreprogrammed Effects: YesUmbrella Mount: NoFront Accessory Mount: Bowens SPhotometrics3200K582 fc / 6260 Lux at 3.3' / 1 m (Unmodified)150 fc / 1610 Lux at 6.6' / 2 m (Unmodified)68 fc / 730 Lux at 9.8' / 3 m (Unmodified)5600K694 fc / 7470 Lux at 3.3' / 1 m (Unmodified)179 fc / 1930 Lux at 6.6' / 2 m (Unmodified)81 fc / 876 Lux at 9.8' / 3 m (Unmodified)3200K5695 fc / 61,300 Lux at 3.3' / 1 m (with Reflector)1180 fc / 12,700 Lux at 6.6' / 2 m (with Reflector)472 fc / 5080 Lux at 9.8' / 3 m (with Reflector)5600K6772 fc / 72,900 Lux at 3.3' / 1 m (with Reflector)1412 fc / 15,200 Lux at 6.6' / 2 m (with Reflector)563 fc / 6060 Lux at 9.8' / 3 m (with Reflector)ConnectivityWireless Remote Control Type: Bluetooth, CRMX *Adapter Required (Not Included)Mobile App Compatible: Yes: Android & iOSApp Name: Godox LightFunctionality: Adjust Settings and Remote ControlWireless Range: 30 m (Bluetooth)Power & I/OPower Source: AC Power (Cable Included)Inputs/Outputs1x IEC Male Power Input (100 to 240 VAC, 50 / 60 Hz)1x XLR 5-Pin Male DMX Input1x XLR 5-Pin Female DMX Output1x USB-A Female Power/Firmware Input/Output (5 VDC at 1.5 A) Input Power: 100 to 240 VAC, 50 / 60 HzIncluded Adapter / Cable: 1x USA Type-A/B Plug to IEC Female CableInline Switch: NoPower Pass-Thru: NoPower Consumption: 230 W (Maximum)MountingYoke Type: Manually-Operated YokeFixture Mounting: 1 x 5/8" ReceiverIncluded in Delivery1 x Godox SL200 RF PaletteLab RGB LED Light1 x Reflector1 x AC Power Cord

Godox SL300RF Full-Color LED LightWith a wide CCT range of 1800 K to 10,000 K, the GODOX SL300 RF covers everything from the warm amber glow of tungsten light to crisp, cool whites. Color rendering remains precise across the entire range, ensuring the image stays true to the creative vision on set.Covering 92% of the Rec.2020 color space, the SL300 RF delivers colored light with controlled saturation and precise hue reproduction. During HSL adjustments, colors transition smoothly without distracting stepping or banding effects.The SL300RF supports Bluetooth remote control via the Godox Light App, while NFC pairing enables faster setup and control of multiple fixtures. An integrated DMX module ensures seamless connection to professional lighting consoles, and the TimoLink TRX transceiver allows for wireless CRMX control, offering greater workflow flexibility on set.PaletteLab color technology redefines light quality, faithfully reproducing the texture, depth, and nuances of natural light. From vibrant colors to precise skin tone rendering, the system excels in a wide range of shooting scenarios. Thanks to an intelligent, temperature-controlled fan system, the light operates quietly even at full power; fan noise remains low, minimizing disruption to on-set audio recording - ensuring cleaner audio and video production.Equipped with a Bowens mount, the SL300 RF integrates seamlessly with a wide range of professional light modifiers. Whether you need a focused beam or soft ambient light, a single fixture covers a broad spectrum of creative lighting requirements.Key FeaturesGeneralFor Film, Broadcast & Video ProductionOutput: 88,800 Lux at 1m w/ ReflectorOnboard, DMX & App Control; NFC FunctionCRI 98 | TLCI 9914 Lighting EffectsFan CooledBowens MountDisplay: YesEnvironmental Resistance: NoOperating Conditions: -20 to 40°CLight FixtureItem Type: 1x LED MonolightIncluded Light Modifier: 1x ReflectorIncluded Storage Case: NoColor Temperature: 1800 to 10,000KColor Modes: RGB, Daylight, TungstenColor Accuracy Standard: CRI 98, TLCI 99Dimming: App-Controlled / Built-In Dimmer / DMX / RDM • 0 to 100%Cooling System: FanBuilt-In Flash: NoPreprogrammed Effects: YesUmbrella Mount: NoFront Accessory Mount: Bowens SPhotometrics3200K582 fc / 6260 Lux at 3.3' / 1 m (Unmodified)150 fc / 1610 Lux at 6.6' / 2 m (Unmodified)68 fc / 730 Lux at 9.8' / 3 m (Unmodified)5600K694 fc / 7470 Lux at 3.3' / 1 m (Unmodified)179 fc / 1930 Lux at 6.6' / 2 m (Unmodified)81 fc / 876 Lux at 9.8' / 3 m (Unmodified)3200K5695 fc / 61,300 Lux at 3.3' / 1 m (with Reflector)1180 fc / 12,700 Lux at 6.6' / 2 m (with Reflector)472 fc / 5080 Lux at 9.8' / 3 m (with Reflector)5600K6772 fc / 72,900 Lux at 3.3' / 1 m (with Reflector)1412 fc / 15,200 Lux at 6.6' / 2 m (with Reflector)563 fc / 6060 Lux at 9.8' / 3 m (with Reflector)ConnectivityWireless Remote Control Type: Bluetooth, CRMX *Adapter Required (Not Included)Mobile App Compatible: Yes: Android & iOSApp Name: Godox LightFunctionality: Adjust Settings and Remote ControlWireless Range: 30 m (Bluetooth)Power & I/OPower Source: AC Power (Cable Included) Inputs/Outputs1x IEC Male Power Input (100 to 240 VAC, 50 / 60 Hz)1x XLR 5-Pin Male DMX Input1x XLR 5-Pin Female DMX Output1x USB-A Female Power/Firmware Input/Output (5 VDC at 1.5 A)Input Power: 100 to 240 VAC, 50 / 60 HzIncluded Adapter / Cable: 1x USA Type-A/B Plug to IEC Female CableInline Switch: NoPower Pass-Thru: NoPower Consumption: 230 W (Maximum)MountingYoke Type: Manually-Operated YokeFixture Mounting: 1 x 5/8" ReceiverIncluded in Delivery1 x Godox SL300 RF PaletteLab RGB LED Light1 x Reflector1 x AC Power Cord

Hollyland Pyro ULTRA Wireless Video Transmission SystemPyro Ultra is a professional wireless video transmission system with up to 1.5 km range, true 4K60 HDMI transmission (12 Mbps), and ultra-low latency down to 20 ms in Focus Mode. Powered by TWiFi dual-band technology (2.4/5 GHz), it ensures stable performance in demanding environments. Broadcast Mode supports unlimited receivers (stable up to 20), with HDMI/SDI I/O, UVC/RTMP streaming, DFS support, and full compatibility within the Pyro ecosystem.At the core of the system is Hollyland’s proprietary TWiFi transmission technology, which combines 2.4GHz and 5GHz into a single, intelligent wireless link. This architecture provides stronger signal stability and improved resistance to interference compared to traditional dual-band systems. With automatic frequency hopping, the system continuously adapts to the environment, ensuring a reliable connection even in RF-heavy locations such as film sets, studios, and live events.The system supports transmission distances of up to 1.5 km (line-of-sight in non-broadcast mode) and 700 m in Broadcast Mode, making it suitable for both compact productions and large-scale setups.Pyro Ultra supports true 4K60 video transmission over HDMI at 12 Mbps, delivering high-resolution images with strong clarity, detail, and color fidelity. This ensures accurate monitoring across all departments, from camera to client viewing. Features1 transmitter to unlimited receivers (Broadcast Mode)True 4K60 wireless transmissionFocus Mode with ultra-low latencyProprietary TWiFi dual-band transmission technologyUp to 1.5 km transmission range (line-of-sight)Integrated into the Pyro ecosystemUVC and RTMP streaming supportHDMI and SDI connectivity with fractional frame ratesDFS-ready for expanded frequency accessAdaptive output resolution and Freeze Frame support Pyro Ultra 1TX & 1RX Transmitter ×1Receiver ×1Easy-Install Short Antenna ×4Easy-Install Antenna ×412V/2A DC Power Adapter ×1USB-C OTG Adapter ×1Double Ball Head with Cold Shoe Mount ×1D-Tap to Locking DC Power Cable ×1Quick Guide ×1Warranty Card ×1 Pyro Ultra 1TX & 2RX Transmitter ×1Receiver ×2Easy-Install Short Antenna ×4Easy-Install Antenna ×812V/2A DC Power Adapter ×1USB-C OTG Adapter ×1Double Ball Head with Cold Shoe Mount ×1D-Tap to Locking DC Power Cable ×1Quick Guide ×1Warranty Card ×1Pyro Ultra RXReceiver ×1Easy-Install Antenna ×4USB-C OTG Adapter ×112V/2A DC Power Adapter ×1Quick Guide ×1Warranty Card ×1 Pyro Ultra TXTransmitter ×1Easy-Install Short Antenna ×4USB-C OTG Adapter ×11/4" Cold Shoe ×1Quick Guide ×1Warranty Card ×1

Hollyland Pyro ULTRA Wireless Video Transmission SystemPyro Ultra is a professional wireless video transmission system with up to 1.5 km range, true 4K60 HDMI transmission (12 Mbps), and ultra-low latency down to 20 ms in Focus Mode. Powered by TWiFi dual-band technology (2.4/5 GHz), it ensures stable performance in demanding environments. Broadcast Mode supports unlimited receivers (stable up to 20), with HDMI/SDI I/O, UVC/RTMP streaming, DFS support, and full compatibility within the Pyro ecosystem.At the core of the system is Hollyland’s proprietary TWiFi transmission technology, which combines 2.4GHz and 5GHz into a single, intelligent wireless link. This architecture provides stronger signal stability and improved resistance to interference compared to traditional dual-band systems. With automatic frequency hopping, the system continuously adapts to the environment, ensuring a reliable connection even in RF-heavy locations such as film sets, studios, and live events.The system supports transmission distances of up to 1.5 km (line-of-sight in non-broadcast mode) and 700 m in Broadcast Mode, making it suitable for both compact productions and large-scale setups.Pyro Ultra supports true 4K60 video transmission over HDMI at 12 Mbps, delivering high-resolution images with strong clarity, detail, and color fidelity. This ensures accurate monitoring across all departments, from camera to client viewing. Features1 transmitter to unlimited receivers (Broadcast Mode)True 4K60 wireless transmissionFocus Mode with ultra-low latencyProprietary TWiFi dual-band transmission technologyUp to 1.5 km transmission range (line-of-sight)Integrated into the Pyro ecosystemUVC and RTMP streaming supportHDMI and SDI connectivity with fractional frame ratesDFS-ready for expanded frequency accessAdaptive output resolution and Freeze Frame support Pyro Ultra 1TX & 1RX Transmitter ×1Receiver ×1Easy-Install Short Antenna ×4Easy-Install Antenna ×412V/2A DC Power Adapter ×1USB-C OTG Adapter ×1Double Ball Head with Cold Shoe Mount ×1D-Tap to Locking DC Power Cable ×1Quick Guide ×1Warranty Card ×1 Pyro Ultra 1TX & 2RX Transmitter ×1Receiver ×2Easy-Install Short Antenna ×4Easy-Install Antenna ×812V/2A DC Power Adapter ×1USB-C OTG Adapter ×1Double Ball Head with Cold Shoe Mount ×1D-Tap to Locking DC Power Cable ×1Quick Guide ×1Warranty Card ×1Pyro Ultra RXReceiver ×1Easy-Install Antenna ×4USB-C OTG Adapter ×112V/2A DC Power Adapter ×1Quick Guide ×1Warranty Card ×1 Pyro Ultra TXTransmitter ×1Easy-Install Short Antenna ×4USB-C OTG Adapter ×11/4" Cold Shoe ×1Quick Guide ×1Warranty Card ×1

Hollyland Pyro ULTRA Wireless Video Transmission SystemPyro Ultra is a professional wireless video transmission system with up to 1.5 km range, true 4K60 HDMI transmission (12 Mbps), and ultra-low latency down to 20 ms in Focus Mode. Powered by TWiFi dual-band technology (2.4/5 GHz), it ensures stable performance in demanding environments. Broadcast Mode supports unlimited receivers (stable up to 20), with HDMI/SDI I/O, UVC/RTMP streaming, DFS support, and full compatibility within the Pyro ecosystem.At the core of the system is Hollyland’s proprietary TWiFi transmission technology, which combines 2.4GHz and 5GHz into a single, intelligent wireless link. This architecture provides stronger signal stability and improved resistance to interference compared to traditional dual-band systems. With automatic frequency hopping, the system continuously adapts to the environment, ensuring a reliable connection even in RF-heavy locations such as film sets, studios, and live events.The system supports transmission distances of up to 1.5 km (line-of-sight in non-broadcast mode) and 700 m in Broadcast Mode, making it suitable for both compact productions and large-scale setups.Pyro Ultra supports true 4K60 video transmission over HDMI at 12 Mbps, delivering high-resolution images with strong clarity, detail, and color fidelity. This ensures accurate monitoring across all departments, from camera to client viewing. Features1 transmitter to unlimited receivers (Broadcast Mode)True 4K60 wireless transmissionFocus Mode with ultra-low latencyProprietary TWiFi dual-band transmission technologyUp to 1.5 km transmission range (line-of-sight)Integrated into the Pyro ecosystemUVC and RTMP streaming supportHDMI and SDI connectivity with fractional frame ratesDFS-ready for expanded frequency accessAdaptive output resolution and Freeze Frame support Pyro Ultra 1TX & 1RX Transmitter ×1Receiver ×1Easy-Install Short Antenna ×4Easy-Install Antenna ×412V/2A DC Power Adapter ×1USB-C OTG Adapter ×1Double Ball Head with Cold Shoe Mount ×1D-Tap to Locking DC Power Cable ×1Quick Guide ×1Warranty Card ×1 Pyro Ultra 1TX & 2RX Transmitter ×1Receiver ×2Easy-Install Short Antenna ×4Easy-Install Antenna ×812V/2A DC Power Adapter ×1USB-C OTG Adapter ×1Double Ball Head with Cold Shoe Mount ×1D-Tap to Locking DC Power Cable ×1Quick Guide ×1Warranty Card ×1Pyro Ultra RXReceiver ×1Easy-Install Antenna ×4USB-C OTG Adapter ×112V/2A DC Power Adapter ×1Quick Guide ×1Warranty Card ×1 Pyro Ultra TXTransmitter ×1Easy-Install Short Antenna ×4USB-C OTG Adapter ×11/4" Cold Shoe ×1Quick Guide ×1Warranty Card ×1

Hollyland Pyro ULTRA Wireless Video Transmission SystemPyro Ultra is a professional wireless video transmission system with up to 1.5 km range, true 4K60 HDMI transmission (12 Mbps), and ultra-low latency down to 20 ms in Focus Mode. Powered by TWiFi dual-band technology (2.4/5 GHz), it ensures stable performance in demanding environments. Broadcast Mode supports unlimited receivers (stable up to 20), with HDMI/SDI I/O, UVC/RTMP streaming, DFS support, and full compatibility within the Pyro ecosystem.At the core of the system is Hollyland’s proprietary TWiFi transmission technology, which combines 2.4GHz and 5GHz into a single, intelligent wireless link. This architecture provides stronger signal stability and improved resistance to interference compared to traditional dual-band systems. With automatic frequency hopping, the system continuously adapts to the environment, ensuring a reliable connection even in RF-heavy locations such as film sets, studios, and live events.The system supports transmission distances of up to 1.5 km (line-of-sight in non-broadcast mode) and 700 m in Broadcast Mode, making it suitable for both compact productions and large-scale setups.Pyro Ultra supports true 4K60 video transmission over HDMI at 12 Mbps, delivering high-resolution images with strong clarity, detail, and color fidelity. This ensures accurate monitoring across all departments, from camera to client viewing. Features1 transmitter to unlimited receivers (Broadcast Mode)True 4K60 wireless transmissionFocus Mode with ultra-low latencyProprietary TWiFi dual-band transmission technologyUp to 1.5 km transmission range (line-of-sight)Integrated into the Pyro ecosystemUVC and RTMP streaming supportHDMI and SDI connectivity with fractional frame ratesDFS-ready for expanded frequency accessAdaptive output resolution and Freeze Frame support Pyro Ultra 1TX & 1RX Transmitter ×1Receiver ×1Easy-Install Short Antenna ×4Easy-Install Antenna ×412V/2A DC Power Adapter ×1USB-C OTG Adapter ×1Double Ball Head with Cold Shoe Mount ×1D-Tap to Locking DC Power Cable ×1Quick Guide ×1Warranty Card ×1 Pyro Ultra 1TX & 2RX Transmitter ×1Receiver ×2Easy-Install Short Antenna ×4Easy-Install Antenna ×812V/2A DC Power Adapter ×1USB-C OTG Adapter ×1Double Ball Head with Cold Shoe Mount ×1D-Tap to Locking DC Power Cable ×1Quick Guide ×1Warranty Card ×1Pyro Ultra RXReceiver ×1Easy-Install Antenna ×4USB-C OTG Adapter ×112V/2A DC Power Adapter ×1Quick Guide ×1Warranty Card ×1 Pyro Ultra TXTransmitter ×1Easy-Install Short Antenna ×4USB-C OTG Adapter ×11/4" Cold Shoe ×1Quick Guide ×1Warranty Card ×1