Blackmagic SDI Expander 8x12G
€2,699.00
Blackmagic SDI Expander 8x12G
Blackmagic SDI Expander 8x12G converts in 2 directions at the same time! It converts 8 independent channels of 12G-SDI to SMPTE-2110, while simultaneously converting a separate set of 8 channels of SMPTE-2110 back to 12G-SDI. That's 16 channels of conversion in a single rack unit! The SMPTE-2110 connections use two 100G Ethernet ports for full SMPTE-2022-7 redundancy. There is also a separate NMOS control Ethernet port and dual redundant AC power supplies for reliable broadcast operation.
Connections
- 100G 2110 IP Networks: 2x 100G QSFP28 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networks
- Senders and Receivers per 100G Pair: 8x Ultra HD or HD
- 1G Control Network: 1x 1G RJ45 for NMOS control, configuration and firmware updates
- SDI Video Inputs: 8
- SDI Video Outputs: 8
- SDI Rates: 1.5G, 3G, 6G, 12G
- SDI Audio Inputs: 16 Ch embedded audio on SDI inputs
- SDI Audio Outputs: 16 Ch embedded audio on SDI outputs
- SMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on each 2110 IP video stream over 100G Ethernet
- SMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on each 2110 IP video stream over 100G Ethernet
- Analog Audio Outputs: 1x 6.35 mm headphone jack
- Power: 2x IEC C14 power inputs
Details of the manufacturer
- Blackmagic Design Pty Ltd
- Grant Petty
- 180 Bank Street
- South Melbourne, 3205, Victoria, Australia
+613 96824770
info-europe@blackmagicdesign.com
Details of the person responsible for putting the product on the European market
- Blackmagic Design PTY
- Rijnlanderweg 766D
- 2132NM Amsterdam, The Netherlands