Aputure Fresnel 2XEX DEMO The Aputure Fresnel 2X features a dual lens design. The rear lens focuses and magnifies the beam onto the larger 6” front Fresnel lens, this achieves zero light waste. Aputure's dual lens optical design makes the Fresnel 2X twice powerful as the original Aputure Fresnel, and makes the LS C120D II up to 14 times brighter, breathing new life into your lights. By utilizing a new rotating barrel design, the Fresnel 2X creates an intuitive user experience,similar to a camera lens. The smooth focus throw gives users an ability to accurately finesse the beam angle of their light source, allowing you to easily spot or flood your light with a simple twist. The Fresnel 2X is adaptable to any situation. With its Bowens Mount design, this fresnel can be attached to a myriad of lights. The 7” front ring accepts the Aputure Barndoors, meaning your light shaping options are endless. With the included carrying case, the Fresnel 2X can easily follow you, wherever your shoots may take you. Features: Dual lens magnification;Outputs twice as much light as the original Aputure Fresnel;Larger 6-inch Fresnel lens;New rotating spot/flood design for increased smoothness and stability 12-40; variable spot to flood beam angle;Designed to minimize light leaks;Robust, heat-resistant material;Compatible with Bowens mount lights;Compatible with Aputure Barndoors.

Aputure Light Dome Mini IIEX DEMO The Light Dome Mini II is Aputure’s compact circular softbox solution for Bowens Mount lights with a brand new quick-folding, flat-pack design. Add a touch of softness and save valuable time on set with the ideal 2 foot (60cm) beauty-dish style small softbox for your lighting kit. Main Features 2ft (60cm) foldable quick-setup circular Bowens Mount softboxQuick-folding design saves time during setupFoldable speed ring packs flat to save space16-sided circular design for smooth, round eyelightsUniversal Bowens accessory mount: Compatible with Aputure Light Storm series up to 600W, amaran 150c & 300cCollapsible beauty-dish design: Included diffusion cloth & gold/silver inner baffle reflectorEnhance contrast with included 40º light control gridCompact & portable for travel & tight spaces In the Box 1x Light Dome Mini II1x Front Diffusion Cloth1x GoId / Silver Inner Baffle Diffusion1x 40º Fabric Light Control Grid1x Carrying Bag

Aputure LS C300D MKIIEX DEMO Two years ago, Aputure revolutionized the industry with the 300d, by creating a powerful and compact LED fixture that could be modified easily. Filmmakers from around the world loved the light’s capabilities, but we knew we could enhance the light even more. So we listened and went back to the drawing board. Powered by user feedback, the new and improved Aputure 300d Mark II is 20% brighter, more durable, more portable, and more intelligent than the original 300d. Change the way you light. Even More Output By utilizing the latest in Aputure COB LED technology, the 300d Mark II outputs a whopping 20% more light than its predecessor. When combined with the Fresnel 2X, the 300d Mark II can produce up to 80,000 lux, approaching the luminance of a 575W HMI. And as always, the 5500K‐balanced 300d Mark II maintains impeccable color fidelity with CRI and TLCI ratings of 96+ and 97+ respectively. A More Robust Lamp Head The 300d Mark II also introduces new design features, while maintaining the same form factor and lightweight aircraft aluminum body as the original 300d. The new yoke allows for 360° of rotation, and when combined with the handbrake locking mechanism from the 120d Mark II, you’ll be able to mount the light in any position, with any modifier. A Revolutionary Redesign But the real advancement is in the complete redesign of the control box. By utilizing Aputure’s fan‐less heatsink design, the 300d Mark II’s All‐in‐One control box is now completely silent. Composed of a durable aluminum alloy, with a new concealed antenna and military‐grade paracord strap, the control box is ready to withstand the rigor of any film set. The 300d Mark II control box is also the first product to utilize Aputure’s new quick release plate and clamp system, allowing you to firmly secure it on any stand, truss, or speed rail. Power Solutions for Indie Filmmakers The 300d Mark II can produce its maximum output by using two high capacity V‐Mount or Gold Mount batteries, but it also features new technology that allows you to power the light with a single battery at up to half output.* You can use this light anywhere your filmmaking takes you. The included 6m NEUTRIK® cable provides the 300d II with a sturdy power connection and allows you the convenience of not having to grab a stinger to power your light. And now, by utilizing a standard 3m male‐to‐female 5‐pin XLR, you can easily replace the header cable in a pinch. An optional 7.5m 5‐pin XLR is also available, letting you keep your control box within arm’s reach while giving you the ability to rig your light anywhere you want, from a menace arm to a tall goalpost rig.

Aputure Nova P300c KitEX DEMO Aputure Nova P300c Kit INCLUDES 1 X Aputure Nova P300c1 X HARD CASE

ATOMOS Shinobi 7 IISKU: ATOMSHB005The Atomos Shinobi 7 II provides a generous viewing area for video and photography. Its 7-inch Full HD touchscreen delivers a calibrated peak brightness of 2,800 nits, making it easier to assess focus, exposure and framing in bright ambient light. Weighing 401 g without a battery and featuring passive cooling, it is suitable for on-camera use as well as monitoring by directors and focus pullers.Waveform, histogram, RGB parade, vectorscope and focus peaking support precise image assessment. Atomos, ARRI and EL Zone false colour tools help evaluate exposure. The MultiScope view displays the camera image alongside several scopes simultaneously. Frame guides and anamorphic desqueeze support a range of shooting and delivery formats.For Log and HDR workflows, Shinobi 7 II provides HLG and PQ monitoring alongside custom 3D LUT previews. LUTs in .cube format can be loaded from an SD card. Display calibration can also be performed directly on the monitor using a compatible calibration probe, available separately.USB-C control allows settings such as white balance, aperture, shutter speed and ISO to be adjusted on supported cameras. Touch-to-focus enables focus point selection directly on the monitor. Available functions depend on the camera model and its firmware.One HDMI input and one HDMI output provide image monitoring and signal loop-through. The product-specific documentation lists support for UHD up to 30p and Full HD up to 60p. Power is supplied by an NP-F battery, USB-C PD or an optional DC battery eliminator. Shinobi 7 II is a monitor; recording takes place in the connected camera. Features7-inch Full HD touchscreen with 2,800 nits of calibrated peak brightnessHDMI input and output for image monitoring and signal loop-throughUSB-C camera control and touch-to-focus with compatible camerasMultiScope view displaying the image and multiple scopes simultaneouslyWaveform, histogram, RGB parade, vectorscope and focus peakingAtomos, ARRI and EL Zone false colour for exposure assessmentHLG and PQ monitoring with custom 3D LUT supportFrame guides and anamorphic desqueezePassive cooling and a weight of 401 g without a battery Powered by an NP-F battery, USB-C PD or an optional DC battery eliminator

ATOMOS Shogun AV-19MSKU: ATOMSHGAVM The Atomos Shogun AV-19M combines a 19-inch 4K UHD touchscreen with NDI HX3, 12G-SDI and HDMI connectivity. With 1,200 nits of brightness and 99% DCI-P3 colour gamut coverage, it gives production teams a detailed view for assessing focus, exposure and composition. Its seven-rack-unit chassis fits a standard 19-inch rack, making it suitable for control rooms, outside broadcast vehicles and mobile production systems.The monitor receives NDI HX3 signals over Gigabit Ethernet. A single source can be displayed full-screen, while quad-view allows up to four NDI sources to be monitored simultaneously. SDI and HDMI sources are displayed individually in full-screen view. Quad-view is available exclusively for NDI sources.Waveform, RGB parade, vectorscope, focus peaking, and Atomos, ARRI and EL Zone false colour tools support technical image assessment. Custom 3D LUTs in .cube format provide a look preview for Log signals. Six assignable function buttons offer direct access to frequently used tools.HDMI and 12G-SDI inputs and outputs simplify integration into existing video systems. Two analogue XLR audio outputs enable external audio monitoring. Dual 4-pin XLR power inputs and Atomos Continuous Power support uninterrupted switching between connected power sources. A dedicated flypack is available separately.

ATOMOS Sumo PRO-19SKU: ATOMSMPR19The ATOMOS Sumo PRO-19 is a professional 19-inch 4K HDR monitor-recorder-switcher for on-set, live and multi-camera productions, combining monitoring, recording, switching and connected cloud workflows in one device.The ATOMOS Sumo PRO-19 combines high-resolution monitoring, powerful recording, switching functions and modern IP and cloud workflows in a single device. With its 19-inch 4K HDR DCI-P3 display, it is designed for professional production environments where a large, accurate image and flexible signal handling are essential.The Sumo PRO-19 supports recording in ProRes, ProRes RAW and Avid DNx and enables capture of up to 8K30 via SDI and HDMI. For multi-camera productions, it can record up to four ISO feeds plus a program output. Quad-view and multi-camera monitoring make it easy to keep track of multiple camera signals at the same time. With 2 x 12G-SDI, 2 x 3G-SDI, 12G-SDI out, and HDMI in/out, the Sumo PRO-19 integrates easily into professional production setups.Tools such as EL Zone False Color, Focus Peaking, Waveform, Vectorscope and Log-to-LUT viewing support precise control of exposure, focus and image signal. User-assignable function buttons also provide fast access to frequently used tools. With integrated Wi-Fi, live streaming, direct cloud upload to services such as ATOMOSphere, Frame.io and Dropbox, AirGlu RF / Bluetooth timecode sync, and NDI 6 / HX3 support, the Sumo PRO-19 is also built for connected productions, remote workflows and modern video village setups. Features19-inch 4K HDR DCI-P3 displayProfessional monitor, recorder and switcher in one unitRecording in ProRes, ProRes RAW and Avid DNxCapture up to 8K30 via SDI and HDMIRecord up to 4 ISO feeds plus program outputQuad-view and multi-camera monitoring2 x 12G-SDI + 2 x 3G-SDI inputs12G-SDI out and HDMI in/outMonitoring tools including EL Zone, Focus Peaking, Waveform and VectorscopeLog-to-LUT viewingUser-assignable function buttonsIntegrated Wi-Fi for cloud and streaming workflowsDirect upload to ATOMOSphere, Frame.io, Dropbox and moreAirGlu RF / Bluetooth timecode sync Support for NDI 6 / HX3 Technical dataProduct type: 4K HDR monitor-recorder-switcherDisplay size: 19 inchesColor space: DCI-P3Recording formats: ProRes, ProRes RAW, Avid DNxMaximum recording resolution: up to 8K30SDI inputs: 2 x 12G-SDI, 2 x 3G-SDISDI output: 12G-SDI outHDMI: HDMI in/outISO recording: up to 4 ISO feedsProgram recording: 1 x program outputMulti-view: Quad-viewConnectivity: Wi-Fi, NDI 6 / HX3, AirGlu RF, Bluetooth timecode syncCloud / streaming: ATOMOSphere, Frame.io, Dropbox upload and live streaming support

Axcom SM-CPVM-4 V-Mount battery charger of the german manufacturer axcom with 4 slots to charge four V-Mount batteries simultaneously. Axcom SM-CPVM-4 with a 4 Pin XLR Output (60W 15V 4.0A). The weight is 2,8kg. Includes 1 x Charger1 x Mains cable1 x XLR extension cable1 x Manual Features Input: 90V - 240VOutput for V-Mount Batteries: 16.8V 2.5AOutput 4 Pin XLR: 60W 15V 4.0A Charging times 4.4Ah approximately 2,7 hours6.6Ah approximately 4,0 hours8.8Ah approximately 5,3 hours11Ah approximately 6,6 hours13,2Ah approximately 7,9 hours

Benro BV8 SKU: BV8 The Benro BV8 tripod kit supports up to 17.6 lbs. / 8 kg making it a perfect match for studio applications and larger video cameras. All of the main controls, other than counterbalance, are located on the left side of the head making it easy to make adjustments with a single hand while operating the camera. The 5 step counterbalance (steps 0-4) allows you to dial in the correct amount of counterbalance for your set-up. The 4 step pan & tilt movements make sure your movements are smooth and steady. One 3/8" accessory mount come in handy when needing to add a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV8 head to flat base mode for mounting to a slider. Excellent stability is achieved with the integrated 75mm metal ball. The eighth generation two stage aluminum tripod is a double tandem leg design that uses an adjustable, removable spreader, a metal 75mm bowl, oversized quick positive leg locks and dual spike feet with pads, making this kit perfect for heavy loads and rigged cameras. In the box Video TripodVideo HeadQR PlateMid Level SpreaderDeluxe Carry CaseStrapRubber FeetTools Benro BV8 Technical data Maximum Load 8 kgMax Height (24° Leg Angle) w/Column Extended 160 cmMinimum Height 71.5 cmMaximum Height 160 cmFolded Length 86.7 cmNumber of Leg Sections 5Leg Lock TypeTwist Lever LockIndependent Leg Spread ML08 Mid-Level SpreaderTilt Range +90 / -70 (Stepped 0-5 Fluid Cartridge Balance)Quick Release (QR) PlateSlide-in Video (QR10) 1/4-20 & 3/8Head Mount Thread Size 75mm BowlWeight 6.3 kg

Benro DL-10 Heavy Duty Dolly The Benro DL-10 Heavy Duty Dolly is a heavy duty dolly designed to be paired with the AS14 jib tripod and is able to handle a max payload of 300 kg (660 lb). All metal parts are CNC machined and anodized and comes with 5 inch super silent medical wheels. Your foot can operate the wheel locks and they lock both wheel rotation and roll. The Benro DL10 is compatible with twin spiked feet and the universal pull buckle secures the tripod foot to the dolly. The dolly folds up to 23 inches for easy storage and includes a carry handle. The diameter of the dolly is 43.3 inches when in use. The DL10 dolly is compatible with the following Benro tripod models: AS14 and BV10.

Benro MoveUp4 The Benro MoveUp4 is a lightweight travel jib that folds up for easy transport. Ideal for HDSLR and lightweight video cameras this jib can support up to 8.8 lb (4kg) and has a vertical reach of 72.8". The 3/8"-16 threaded flat base allows for a number of mounting options. Soft case included. Folding Design The Benro MoveUp4 folds up in a small, portable package making this ideal for filmmakers who need travel friendly gear. Its compact design pairs nicely with smaller tripods and lightweight cameras, therefore reducing the overall amount of equipment required to enhance your production value. Accessory Mounting Threaded mounting points allow you to attach monitor arm to view shot live while operating from the back of your jib. Vertical search With vertical search of 6 feet (1.83 m), MoveUp4 can achieve sweeping shots for the cinematic look. Technical data Maximum Load 4 kgMinimum Height 123 cmMaximum Height 185 cmFolded Length 69 cmWeight 3.1 kg In the box MoveUp4 Travel JibCarrying CaseWeight Clip

BirdDog PLAY ProPLAY Pro from BirdDog is a compact, high-performance NDI decoder designed to bring IP video directly to any HDMI display with simplicity, reliability, and broadcast-grade quality. Built for professional AV, live production, and installed environments, it seamlessly bridges NDI workflows to real-world screens.Supporting up to 4K video playback, PLAY Pro delivers ultra-low latency decoding of NDI®, NDI® HX2 and HX3 sources, making it ideal for demanding multi-source environments. With plug-and-play setup via Ethernet and Power over Ethernet (PoE), it integrates effortlessly into existing IP-based systems.Beyond decoding, PLAY Pro also offers remote KVM functionality, enabling users to control connected computers directly from the display using a keyboard and mouse—perfect for control rooms, studios, and distributed workflowsFeatures4K NDI® / NDI® HX2 & HX3 decoding up to 60fpsUltra-low latency video playback over IPHDMI output for any professional or consumer displayBuilt-in remote KVM functionality (keyboard & mouse control)Power over Ethernet (PoE) support for single-cable installationCompact, rugged design for permanent or portable setupsBrowser-based configuration via BirdUIFast source switching for live production environments

BirdDog X4E Ultra 20x PTZ Camera (AI Tracking)X4E delivers everything you love about BirdDog’s award-winning PTZ performance – the same image quality, AI features, and professional connectivity – now in a wired-first version without built-in Wi-Fi or battery. It’s the perfect choice for studios, venues, houses of worship, and large-scale installations where rock-solid reliability and value matter most. X4E shares the same high-performance DNA as X4 Ultra. The same Sony sensor. The same image pipeline. The same BirdDog precision engineering. Everything that made X4 Ultra our best-selling camera – just refined for wired workflows. X4E is designed for fixed installs and controlled network environments where consistency is key. By removing Wi-Fi and the internal battery, X4E offers: Simpler integration for system installers, more accessible pricing for multi-camera deployments, and the same professional flexibility across SDI, HDMI, USB-C, SRT, NDI®, RTMP, and RTSP. The X4E Ultra’s AI controls are designed to be easy to use, ensuring predictable and consistent performance with every shot. As your needs grow, the AI capabilities expand, adapting to deliver precise, automated control over your PTZ camera movements. Technical dataIMAGINGImage Sensor: Sony 1 / 1.8” CMOS – ULTRA HDLens: f= 6.25 - 125mmOptical Zoom: 20xVideo Format: 2160p @ 60/59.94/50/30/29.97/25fps / 1080p @ 60/59.94/50/30/29.97/25fps / 1080i @ 59.94/50fps / 720p @ 60/59.94Horizontal Angle of View: 60° (W) ~ 3.5°(T)Vertical Angle of View: 35° (W) ~ 2.0°(T)Diagonal Angle of View: 66.6°(W) ~ 4.0°(T)Aperture: F1.58 (W) ~ 3.95 (T)Focus: Auto, ManualExposure: Auto, Shutter Priority, Iris Priority, ManualShutter Speed: 1/1 - 1/10000sBacklight Compensation: YesDigital Noise Reduction: 3D Noise ReductionSNR: ≥45dBEffective Pixels: 8.42 MPAI Tracking: Presenter Tracking, ZoneMECHANICALPan/Tilt Rotation: ±170°, -30° ~ +90°Pan Control Speed: 1.7-80°/secTilt Control Speed: 1.7-60°/secPreset Number: 255 PresetsIntegrated Tally Light: HALO tally and rear number tally system (Red/Green)Display: e-Ink 2.13” with customization logoI/0 INTERFACEVideo Output Interfaces: 3G-SDI, HDMI, USB-C UVC, NetworkVideo Compression Formats: H.264, H.265Network Interfaces: 1Gbps adaptive Ethernet port; PoE IEEE 802.3at, WiFi 6 2x2 MIMO (Optional Base station) / 1Gbps adaptive Ethernet port; PoE IEEE 802.3atEncoder Network Protocols NDI®|HX2, NDI®|HX3, RTSP, RTMP, SRTControl Interfaces 1Gbps Ethernet, USB-C, RS-232Control Protocols VISCA Baud Rate: 38400/9600/4800/2400, VISCA-IP, NDI®, ONVIFAnalogue Audio 3.5mm TRS Line input/Mic InputGENERALEnvironmental Operation: InternalInput Voltage: DC 12V, PoE+ IEEE 802.3atInput Current: 5.0A (Max)Battery Capacity: 9450mAh N/ABattery operating time (per charge): up to 6 hours run time (usage dependent) N/AWorking Temperature: 0°C ~ +40°CWorking Humidity: 20% ~ 80%Dimension (W*H*D) mm: 140.2*188.9*203.2mm/ 295*245*254mm (before / after packing)Net and Gross Weight: 2.19kg (Net Weight)

BirdDog X4E Ultra 20x PTZ Camera (AI Tracking)X4E delivers everything you love about BirdDog’s award-winning PTZ performance – the same image quality, AI features, and professional connectivity – now in a wired-first version without built-in Wi-Fi or battery. It’s the perfect choice for studios, venues, houses of worship, and large-scale installations where rock-solid reliability and value matter most. X4E shares the same high-performance DNA as X4 Ultra. The same Sony sensor. The same image pipeline. The same BirdDog precision engineering. Everything that made X4 Ultra our best-selling camera – just refined for wired workflows. X4E is designed for fixed installs and controlled network environments where consistency is key. By removing Wi-Fi and the internal battery, X4E offers: Simpler integration for system installers, more accessible pricing for multi-camera deployments, and the same professional flexibility across SDI, HDMI, USB-C, SRT, NDI®, RTMP, and RTSP. The X4E Ultra’s AI controls are designed to be easy to use, ensuring predictable and consistent performance with every shot. As your needs grow, the AI capabilities expand, adapting to deliver precise, automated control over your PTZ camera movements. Technical dataIMAGINGImage Sensor: Sony 1 / 1.8” CMOS – ULTRA HDLens: f= 6.25 - 125mmOptical Zoom: 20xVideo Format: 2160p @ 60/59.94/50/30/29.97/25fps / 1080p @ 60/59.94/50/30/29.97/25fps / 1080i @ 59.94/50fps / 720p @ 60/59.94Horizontal Angle of View: 60° (W) ~ 3.5°(T)Vertical Angle of View: 35° (W) ~ 2.0°(T)Diagonal Angle of View: 66.6°(W) ~ 4.0°(T)Aperture: F1.58 (W) ~ 3.95 (T)Focus: Auto, ManualExposure: Auto, Shutter Priority, Iris Priority, ManualShutter Speed: 1/1 - 1/10000sBacklight Compensation: YesDigital Noise Reduction: 3D Noise ReductionSNR: ≥45dBEffective Pixels: 8.42 MPAI Tracking: Presenter Tracking, ZoneMECHANICALPan/Tilt Rotation: ±170°, -30° ~ +90°Pan Control Speed: 1.7-80°/secTilt Control Speed: 1.7-60°/secPreset Number: 255 PresetsIntegrated Tally Light: HALO tally and rear number tally system (Red/Green)Display: e-Ink 2.13” with customization logoI/0 INTERFACEVideo Output Interfaces: 3G-SDI, HDMI, USB-C UVC, NetworkVideo Compression Formats: H.264, H.265Network Interfaces: 1Gbps adaptive Ethernet port; PoE IEEE 802.3at, WiFi 6 2x2 MIMO (Optional Base station) / 1Gbps adaptive Ethernet port; PoE IEEE 802.3atEncoder Network Protocols NDI®|HX2, NDI®|HX3, RTSP, RTMP, SRTControl Interfaces 1Gbps Ethernet, USB-C, RS-232Control Protocols VISCA Baud Rate: 38400/9600/4800/2400, VISCA-IP, NDI®, ONVIFAnalogue Audio 3.5mm TRS Line input/Mic InputGENERALEnvironmental Operation: InternalInput Voltage: DC 12V, PoE+ IEEE 802.3atInput Current: 5.0A (Max)Battery Capacity: 9450mAh N/ABattery operating time (per charge): up to 6 hours run time (usage dependent) N/AWorking Temperature: 0°C ~ +40°CWorking Humidity: 20% ~ 80%Dimension (W*H*D) mm: 140.2*188.9*203.2mm/ 295*245*254mm (before / after packing)Net and Gross Weight: 2.19kg (Net Weight)

Blackmagic ATEM Monitoring Rack Panel 20SKU: SWPANELABRMP20The ATEM Monitoring Rack Panel 20 is a video converter built into a 1RU rack-mount ATEM switcher control panel! It features 20 buttons for controlling a local ATEM switcher, plus a front panel talkback connection. The video converter has two redundant SMPTE-2110 10G Ethernet connections, which are converted to 2 x 12G-SDI outputs and an HDMI output. Video is also displayed on the converter's built-in LCD screen. Simply mount it in a rack and use it when setting up or monitoring a job!Connections10G 2110 IP Networks: 2 x 10G RJ45 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networks10G Control Network: 1 x 1G RJ45 for connection to switcher and NMOS controlTotal Video Inputs: 1Total Video Outputs: 3SDI Video Outputs: 2SDI Rates: 1.5G, 3G, 6G, 12GHDMI 2.0 Video Inputs: 1SDI Audio Outputs: 16 Ch embedded audio on all SDI outputsHDMI Audio Outputs: 8 Ch embedded audio on HDMI outputSDI Program Outputs: 2SDI Preview Outputs: 2SDI Multi View Outputs: 2HDMI Multi View Outputs: 1Talkback: 1x 5-pin XLR TalkbackComputer Interface: 1x USB-C for setup utility and software updatesPower: 2x IEC C14 power inputs

Blackmagic ATEM 4 M/E Constellation IPATEM 4 M/E Constellation IP is an advanced live production switcher with a powerful design that's fully SMPTE-2110 native and uses high speed 100G Ethernet connections! This makes it easy to add a converter for a mix of traditional 12G-SDI or modern SMPTE-2110 IP video connections. Plus, all IP video connections are fully redundant and SMPTE-2022-7 compliant. You get 32 inputs and 28 outputs, 16 ATEM Advanced Keyers, 4 multi-views and 2 SuperSource processors for a total of 12 DVEs.Connections100G 2110 IP Networks: 8x 100G QSFP28 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networksSenders and Receivers per 100G Pair: 8 x Ultra HD10G Control Network: 2x 10G RJ45 Ethernet for NMOS control plus loading media, saving and loading presetsReference Network: 2x RJ45 Ethernet for 2110 PTP clock1G Management: 1x RJ45 Ethernet. Supports 10/100/1000 BASE-T. For ATEM Setup utility and software updatesAnalog Audio Outputs: 1x 6.35 mm headphone jackTotal Video Inputs: 32Total Video Outputs: 28Total Aux Outputs: 24Total Audio Outputs: 1x 6.35 mm headphone jack. 1x SpeakerFrame Rate and Format Converters: On all 32 inputsExtra Audio Outputs: 1x 6.35 mm headphone jack. (the audio will be the mix of PGM plus engineering, production and side tone.) 1x built-in speakerSDI Program Outputs: Any of the 24 outputsSDI Preview Outputs: Any of the 24 outputsWebcam Output: Rear USB-C supports 720p or 1080p at PGM frameControl Panel Connection: 2x 10G RJ45 Ethernet for panel connection, NMOS control plus loading media, saving and loading presetsInternal Timecode Generator: YesComputer Interface: Rear USB-C supports USB 3.0 for external USB audio (Fairlight Live), webcam out, ATEM Setup utility and software updates. Front USB-C supports USB 2.0 for updates and setup onlyPower: 2x IEC C14 power inputs.

Blackmagic ATEM 4 M/E Constellation IP PlusSKU: SWATEMSCN2/3ME4/IP/PATEM 4 M/E Constellation IP Plus is a much larger and more powerful live production switcher with lots of video inputs and outputs! It features a design that's fully SMPTE-2110 native with high-speed 100G Ethernet connections. Like the smaller model, all IP video connections are fully redundant and SMPTE-2022-7 compliant. You get an impressive 64 inputs and 52 outputs, 16 ATEM Advanced Keyers, 4 multi-views and 2 SuperSource processors for a total of 12 DVEs. Perfect for large live productions!Connections100G 2110 IP Networks: 16 x 100G QSFP28 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networksSenders and Receivers per 100G Pair: 8x Ultra HD10G Control Network: 2x 10G RJ45 Ethernet for NMOS control plus loading media, saving and loading presetReference Network: 2x RJ45 Ethernet for 2110 PTP clock1G Management: 1x RJ45 Ethernet. Supports 10/100/1000 BASE-T. For ATEM Setup utility and software updatesAnalog Audio Outputs: 1x 6.35 mm headphone jackTotal Video Inputs: 64Total Video Outputs: 52Total Aux Outputs: 48Total Audio Outputs: 1x 6.35 mm headphone jack. 1x SpeakerFrame Rate and Format Converters: On all 64 inputsExtra Audio Outputs: 1x 6.35 mm headphone jack. (the audio will be the mix of PGM plus engineering, production and side tone.) 1x built-in speakerSDI Program Outputs: Any of the 48 outputsSDI Preview Outputs: Any of the 48 outputsWebcam Output: Rear USB-C supports 720p or 1080p at PGM frameControl Panel Connection: 2x 10G RJ45 Ethernet for panel connection, NMOS control plus loading media, saving and loading presetsInternal Timecode Generator: YesComputer Interface: Rear USB-C supports USB 3.0 for external USB audio (Fairlight Live), webcam out, ATEM Setup utility and software updates. Front USB-C supports USB 2.0 for updates and setup onlyPower: 2x IEC C14 power inputs.

Blackmagic ATEM Monitoring Rack Panel 40SKU: SWPANELABRMP40The ATEM Monitoring Rack Panel 40 is a video converter built into a larger 2RU rack-mount ATEM switcher control panel! It features 40 buttons for controlling a local ATEM switcher, plus a front panel talkback connection for communication. The video converter has two redundant SMPTE-2110 10G Ethernet connections, which are converted to 2 x 12G-SDI outputs and an HDMI output. Video is also displayed on the converter's large 5-inch built-in LCD screen, giving you convenient local rack monitoring!Connections10G 2110 IP Networks: 2x 10G RJ45 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networks10G Control Network: 1x 1G RJ45 for connection to switcher and NMOS controlTotal Video Inputs: 1Total Video Outputs: 3SDI Video Outputs: 2SDI Rates: 1.5G, 3G, 6G, 12GHDMI 2.0 Video Inputs: 1SDI Audio Outputs: 16 Ch embedded audio on all SDI outputsHDMI Audio Outputs: 8 Ch embedded audio on HDMI outputSDI Program Outputs: 2SDI Preview Outputs: 2SDI Multi View Outputs: 2HDMI Multi View Outputs: 1Talkback: 1x 5-pin XLR TalkbackComputer Interface: 1x USB-C for setup utility and software updatesPower: 2x IEC C14 power inputs

Blackmagic Cloud Store UltraBlackmagic Cloud Store Ultra is an extremely high-performance network storage solution in a compact 1RU design with server-style front-to-rear cooling. Cloud Store Ultra features 24TB / 48TB capacity 12-card RAID 0 flash memory core, 2 x 100G Ethernet ports, RAID 5 support for data protection, two redundant power supplies, USB-C and Blackmagic Cloud Sync for distributing files globally. It’s fast, even with lots of simultaneous users all accessing files at the same time.Connections100G Ethernet Networks: 2x 100G QSFP28 connections. Each 100G port can be assigned an independent IP address and subnet mask for up to 200G bandwidth and load balancing when used with a managed switch1G Management: 1x RJ45 Ethernet. Supports 10/100/1000 BASE-T. For Cloud Store Setup utility and software updatesSDI Monitor Outputs: 2HDMI Monitor Outputs: 1SDI Rates: 1.5G, 3GComputer Interface: 1x USB-C for Cloud Store Setup utility and software updatesPower: 2x IEC C14 power inputs

Blackmagic Cloud Store UltraBlackmagic Cloud Store Ultra is an extremely high-performance network storage solution in a compact 1RU design with server-style front-to-rear cooling. Cloud Store Ultra features 24TB / 48TB capacity 12-card RAID 0 flash memory core, 2 x 100G Ethernet ports, RAID 5 support for data protection, two redundant power supplies, USB-C and Blackmagic Cloud Sync for distributing files globally. It’s fast, even with lots of simultaneous users all accessing files at the same time.Connections100G Ethernet Networks: 2x 100G QSFP28 connections. Each 100G port can be assigned an independent IP address and subnet mask for up to 200G bandwidth and load balancing when used with a managed switch1G Management: 1x RJ45 Ethernet. Supports 10/100/1000 BASE-T. For Cloud Store Setup utility and software updatesSDI Monitor Outputs: 2HDMI Monitor Outputs: 1SDI Rates: 1.5G, 3GComputer Interface: 1x USB-C for Cloud Store Setup utility and software updatesPower: 2x IEC C14 power inputs

Blackmagic Fairlight Live Audio Panel 10SKU: DVFL/AAFLP10 Fairlight Live Audio Panel 10 is a desktop control surface with 10 motorized faders and a large touchscreen display, designed for professional live audio mixing with Fairlight Live. Controls include layers, bus, matrix, aux, VCA, sub-masters and talkback for fast hands-on access to your mix. The touchscreen displays channel strip information, levels, EQ, dynamics processing and plug-in interfaces. Ideal for home studios and small suites. Fully integrated with Fairlight Live.Connections2110 IP Video and Audio Networks: 2x 10G RJ45 Ethernet connectionsSenders and Receivers per 10G Pair: Supports 2110 IP video and audio plus analog audio in and out of panel1G Control Network: 1x 1G RJ45 for computer connection, configuration and software updatesHDMI Monitor Outputs: 1Analog Audio Inputs: 1x 3-pin XLR for mic level analog audio. 1x 5-pin XLR for talkback headsetAnalog Audio Outputs: 2x 3-pin XLR for line level analog audio. 1x 5-pin XLR for talkback headset. 2x 6.35mm headphone jackComputer Interface: 1x USB Type‑C for computer connection, software configuration and software updatesHDMI Video Output: 1x HDMI Type APower: 1x IEC C14 power input. 1x 4-pin XLR 12V DC power input.

Blackmagic Fairlight Live Audio Panel 20SKU: DVFL/AAFLP20Fairlight Live Audio Panel 20 is a desktop control surface with 20 motorized faders and two large touchscreen displays, designed for professional live audio mixing with Fairlight Live. Controls include layers, bus, matrix, aux, VCA, sub-masters and talkback for fast hands-on access to your mix. The touchscreens display channel strip information, levels, EQ, dynamics processing and plug-in interfaces. Ideal for home studios and mid-sized productions. Fully integrated with Fairlight Live.Connections2110 IP Video and Audio Networks: 2 x 10G RJ45 Ethernet connectionsSenders and Receivers per 10G Pair: Supports 2110 IP video and audio plus analog audio in and out of panel1G Control Network: 1x 1G RJ45 for computer connection, configuration and software updatesHDMI Monitor Outputs: 1Analog Audio Inputs: 1x 3-pin XLR for mic level analog audio / 1x 5-pin XLR for talkback headsetAnalog Audio Outputs: 2x 3-pin XLR for line level analog audio / 1x 5-pin XLR for talkback headset / 2x 6.35mm headphone jackComputer Interface: 1x USB Type‑C for computer connection, software configuration and software updates.HDMI Video Output: 1x HDMI Type A. Power: 2x IEC C14 power inputs.

Blackmagic Fairlight Live Audio Panel 40SKU: DVFL/AAFLP40Fairlight Live Audio Panel 40 is a desktop control surface with 40 motorized faders and four large touchscreen displays, designed for professional live audio mixing with Fairlight Live. Controls include layers, bus, matrix, aux, VCA, sub-masters and talkback for fast hands-on access to your mix. The touchscreens display channel strip information, levels, EQ, dynamics processing and plug-in interfaces. Ideal for large live broadcasts. Fully integrated with Fairlight Live.Connections2110 IP Video and Audio Networks: 2x 10G RJ45 Ethernet connectionsSenders and Receivers per 10G Pair: Supports 2110 IP video and audio plus analog audio in and out of panel1G Control Network: 1x 1G RJ45 for computer connection, configuration and software updatesHDMI Monitor Outputs: 1Analog Audio Inputs: 1x 3-pin XLR for mic level analog audio / 1x 5-pin XLR for talkback headsetAnalog Audio Outputs: 2x 3-pin XLR for line level analog audio / 1x 5-pin XLR for talkback headset / 2x 6.35mm headphone jackComputer Interface: 1x USB Type‑C for computer connection, software configuration and software updatesHDMI Video Output: 1x HDMI Type APower: 2x IEC C14 power inputs

Blackmagic HyperDeck ISO Recorder 100GSKU: BM-HYPERD/UISO/100GHyperDeck ISO Recorder 100G is designed for live production, recording 8 cameras at the same time. Record for later editing or get exciting live-action replay with DaVinci Resolve! Files are recorded in broadcast-quality ProRes format direct to network storage for very long record durations. It connects via SMPTE-2110 100G Ethernet, so all 8 video channels run over a single connection. Or add a Blackmagic SDI Expander 8x12G for 12G-SDI. You can also play back all 8 channels, great for testing!Connections100G 2110 IP Networks: 2x 100G QSFP28 connections. Supports ST 2022-7 redundant delivery of IP streams over two 2110 networksSenders and Receivers per 100G Pair: 8x Ultra HD or 8 HD100G Ethernet: 2x 100G QSFP28 connections10G Control Network: 2x 10G RJ45 Ethernet for NMOS controlReference Network: 2x RJ45 Ethernet for 2110 PTP clock1G Management: 1x RJ45 Ethernet. Supports 10/100/1000 BASE-T. For HyperDeck Setup utility and software updatesSDI Monitor Outputs: 2HDMI Monitor Outputs: 1SDI Rates: 1.5G, 3G, 6G, 12GAnalog Audio Outputs: 1x 6.35 mm headphone jackSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on each 2110 IP video stream over 100G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on each 2110 IP video stream over 100G EthernetSDI Audio Outputs: 16 channels embedded audioHDMI Audio Outputs: 8 channels embedded audioComputer Interface: 1x USB-C for HyperDeck Setup utility and software updatesPower: 2x IEC C14 power inputs.