Wooden Camera Mini 4pin XLR to Full 4pin XLR SKU: 209300 Adapts mini 4pin XLR (female) to standard 4pin XLR (male). Wiring also compatible with TV Logic monitors and Alphatron EVF. Heavy gauge wires can withstand more than 10A at 14.4V. Cable length 20.3 cm
Wooden Camera Nikon Z Mount to PL Mount Adapter (Pro) SKU: 269000 Nikon Z Mount to PL Adapter (Pro) is a shimmable version of our PL lens mount adapter that enables mounting of PL mount lenses onto the Nikon Z series of Mirrorless cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The foot can also attach directly to the front of the Unified DSLR Cage (Small) by two included screws. PL Cap is included to prevent dust from entering the sensor area when the lens is not attached. If you are using the Nikon Z Mount to PL Mount (Pro) without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color-coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Weight: 251g Dimensions: 85.1 mm x 81.8 mm x 48 mm Includes 2 x M4x20mm socket cap screw1 x 1/4-20 Support Foot1 x Universal Support Foot
Wooden Camera PL Mount (Canon C300mkIII, C500mkII) SKU: 282100 PL Mount (Canon C300mkIII, C500mkII) allows users to convert their Canon C300mkIII and C500mkII camera to a PL Mount through a simple modification process. The PL Mount is made of stainless steel and aircraft grade aluminum and includes the PL port cap. Shims are provided with the kit for adjusting back focus if it is out of calibration. Adjustment should not be needed but can be checked using a wide angle lens and a focus chart. The native Canon C300mkIII/C500mkII Lens Mount screws are used to attach the PL Mount to the camera. The modification process can be reversed by reversing steps in the process. Shim Set stackable to achieve necessary thickness Silver .0127mm (0.0005") Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005")
Wooden Camera PL Mount Cap SKU: 174600 Replacement PL Mount Cap for any ARRI standard PL mount including MFT to PL Adapter (Pocket) MFT to PL Adapter (GH3) and many more.
Wooden Camera PL Mount Modification Kit SKU: 274600 The PL Mount Modification Kit (Blackmagic Pocket Cinema Camera 6K / 6K Pro) allows users to convert their BMPCC6K camera to a PL Mount through a short modification process. All necessary tools are included in the kit. The PL Mount is made of stainless steel and aircraft grade aluminum and includes the PL port cap. Shims are provided with the kit for adjusting back focus and the appropriate shims are installed prior to shipping. Further adjustment should not be needed but can be checked using a wide angle lens and a focus chart. The BMPCC6K's own EF Mount screws are used to attach the PL Mount to the camera.The modification process can be reversed. If you choose to go back to EF mount in the future, you can do it by reversing steps in the process, however, switching back and forth will eventually strip the plastic in your camera as the sensor block is made of a composite plastic material (it is strong but still plastic). Includes 1x Shim Set1x Jeweler's ScrewdriverShim set (stackable to achieve necessary thickness)Silver .0127mm (0.0005") Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005") Important Note: While the vast majority of modern, s35mm lenses are compatible, lenses with a rear protrusion longer than 33.5mm, measured from the PL flange, are not compatible and other lenses may not fit due to the shape of the original Blackmagic 6K body design. A list of incompatible lenses will be available but will be a work in process. A diagram will also become available soon which will detail the protrusion requirements for fitting into a modified BMPCC6K.
Wooden Camera RED Male LEMO to Female Pogo LCD/EVF Cable (12", Weapon/Scarlet-W/Raven) SKU: 221400 RED Male LEMO to Female Pogo LCD/EVF Cable (12") is a cable that allows the RED displays to be attached to products like the Easy Top (Weapon/Scarlet-W/Raven) and the RED LEMO Adapter A. The male LEMO connector attaches to any RED Standard 16pin LEMO and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male LEMO to Female Pogo LCD/EVF Cable (24", Weapon/Scarlet-W/Raven) SKU: 221500 RED Male LEMO to Female Pogo LCD/EVF Cable (24") is a cable that allows the RED displays to be attached to products like the Easy Top (Weapon/Scarlet-W/Raven) and the RED LEMO Adapter A. The male LEMO connector attaches to any RED Standard 16pin LEMO and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male LEMO to Female Pogo LCD/EVF Cable (36", Weapon/Scarlet-W/Raven) SKU: 221600 RED Male LEMO to Female Pogo LCD/EVF Cable (36") is a cable that allows the RED displays to be attached to products like the Easy Top (Weapon/Scarlet-W/Raven) and the RED LEMO Adapter A. The male LEMO connector attaches to any RED Standard 16pin LEMO and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male Pogo to Female Pogo LCD/EVF Cable (12", RED DSMC2) SKU: 221100 RED Male Pogo to Female Pogo LCD/EVF Cable (12") is a cable that allows the RED displays to be moved off the top of the RED Weapon/Scarlet-W/Raven and into a position more easily viewed. The male pogo connector attaches to the camera body without tools and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male Pogo to Female Pogo LCD/EVF Cable (24", RED DSMC2) SKU: 221200 RED Male Pogo to Female Pogo LCD/EVF Cable (24") is a cable that allows the RED displays to be moved off the top of the RED Weapon/Scarlet-W/Raven and into a position more easily viewed. The male pogo connector attaches to the camera body without tools and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male Pogo to Male LEMO LCD/EVF Cable (12", Weapon/Scarlet-W/Raven) SKU: 221700 RED Male Pogo to Male LEMO LCD/EVF Cable (12") is a cable that allows the original RED displays to be attached to the new RED Weapon/Scarlet-W/Raven DSMC2 cameras. The male pogo connector attaches to the camera body without tools and the Male LEMO connector attaches to the original RED LCD/EVF using the standard 16pin LEMO connector. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male Pogo to Male LEMO LCD/EVF Cable (24", Weapon/Scarlet-W/Raven) SKU: 221800 RED Male Pogo to Male LEMO LCD/EVF Cable (24") is a cable that allows the original RED displays to be attached to the new RED Weapon/Scarlet-W/Raven DSMC2 cameras. The male pogo connector attaches to the camera body without tools and the Male LEMO connector attaches to the original RED LCD/EVF using the standard 16pin LEMO connector. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera Simple 3pin Fischer Trigger Cable SKU: 229800 Simple 3pin Fischer Trigger Cable (120") connects to any ARRI standard 3pin Fischer port containing with start/stop capability like D-Box (Alexa Mini) and D-Box (C300mkII) and triggers the camera via the red button on the end. Power is not required for use and cable length is 3 meters.
Wooden Camera Sony E-Mount to LPL Mount Adapter (Pro) SKU: 269100 ARRI LPL Mount for Sony E-Mount Cameras allows ARRI LPL Signature Prime Lenses to be used with Sony E-Mount Full Frame Alpha series cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The support foot can also be attached to the Unified DSLR Cage natively using the vertical support hole and the Unified Lens Adapter Support Kit. LPL Cap included to prevent dust from entering sensor area when lens is not attached. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. LPL Mount is passive and does not communicate lens data to the camera. Weight: 216 gDimensions: 81,8 mm x 81,8 mm x 46.5 mm
Wooden Camera UFF-1 Universal Follow Focus (Base) SKU: 244400 Wooden Camera UFF-1 Universal Follow Focus is the first follow focus to be compatible with 15mm LW, 15mm Studio, and 19mm rods without the use of adapters. Simply unlock the clamps and slide to the appropriate rod position. Notches in the bottom of the bridge indicate when the clamp is in the correct position.The included swing arm and lens gears can be flipped to the front or back position which is helpful for compact lens configuration and the bridge has the lowest height in the industry so it will work with the larger zoom lens barrels.The hand wheel is compatible with the standard marking disc and hard stop disc which provides positionable limits when using DSLR lenses with infinite barrel rotation. In total, 2 marking discs and 1 hard stop disc are included. The hand wheel is removable and has a standard accessory port for use with the focus whip and crank (not included). UFF-1 Universal Follow Focus is compatible with 15mm LW, 15mm Studio, and 19mm rods without the use of adapters. Included in the kit are 5 gear attachments .5 mod for Canon ENG.6 mod for Fujinon ENG.8 mod small diameter for Cinema Lenses.8 mod large diameter for Cinema LensesFriction Gear for DSLR lensesEach kit ships in custom cut foam which fits natively into a Pelican 1500 case (not included). Included Items 1 x Adjustable Bridge with Rod Clamps1 x Hand Wheel1 x Hard Stop Disc2 x Standard Marking Discs5 x Focus Gears (.5 mod, .6 mod, .8 mod small, .8 mod large, Friction Gear)1 x Custom Cut Foam for a Pelican 1500 Case (not included)
Wooden Camera UFF-1 Universal Follow Focus (Pro) SKU: 244500 Wooden Camera UFF-1 Universal Follow Focus is the first follow focus to be compatible with 15mm LW, 15mm Studio, and 19mm rods without the use of adapters. Simply unlock the clamps and slide to the appropriate rod position. Notches in the bottom of the bridge indicate when the clamp is in the correct position.The included swing arm and lens gears can be flipped to the front or back position which is helpful for compact lens configuration and the bridge has the lowest height in the industry so it will work with the larger zoom lens barrels.Each of the two hand wheels is compatible with the standard marking disc and hard stop disc which provides positionable limits when using DSLR lenses with infinite barrel rotation. In total, 10 marking discs and 2 hard stop discs are included. The hand wheels are removable and have standard accessory ports for the included focus whip and crank. The crank's unique design has the same accessory port on the backside which allows the whip to be plugged in when needed.The hand wheel extension allows users to offset either wheel by 75mm (3 inches) which is great when using a large diameter lens or when in 15mm studio mode. Included in the kit are 5 gear attachments .5 mod for Canon ENG.6 mod for Fujinon ENG.8 mod small diameter for Cinema Lenses.8 mod large diameter for Cinema LensesFriction Gear for DSLR lenses Each kit ships in custom cut foam which fits natively into a Pelican 1500 case (not included). Included Items 1 x Adjustable Bridge with Rod Clamps2 x Hand Wheels2 x Hard Stop Discs10 x Standard Marking Discs1 x Hand Wheel Extension1 x Focus Whip1 x Focus Crank5 x Focus Gears (.5 mod, .6 mod, .8 mod small, .8 mod large, Friction Gear)1 x Custom Cut Foam for a Pelican 1500 Case (not included)
Wooden Camera UMB-1 Universal Mattebox Base SKU: 201800 UMB-1 Universal Mattebox (Base) comes standard with two rotating 4x5.65 filter stages (with an optional third stage available), individual tray catchers, folding French flag, 143mm diameter opening, a height adjustable 15mm LW rod bracket which can be adapted to studio rods a universal cloth donut with easy to grab finger loops, and NATO standard accessory rails on left, right, and top for attaching accessories. The Wooden Camera UMB-1 is designed to be user upgradable and quick to transition from base, to clamp on, to swing away, to ultralight when using a stabilizer. Upgradable to Swing Away or Clamp On versions when needed. UMB-1 Universal Mattebox Base Included Components 1 x Height adjustable 15mm LW rod bracket2 x rotating 4x5.65 filter stages1 x Folding French flag1 x 143 mm opening with universal cloth donut1 x NATO standard accessory rails on left, right, and top
Wooden Camera UMB-1 Universal Mattebox Clamp On SKU: 201900 UMB-1 Universal Mattebox (Clamp On) comes standard with two rotating 4x5.65 filter stages (with an optional third stage available), individual tray catchers, folding French flag, 143mm native diameter opening, NATO standard accessory rails on left, right, and top for attaching accessories, and a complete set of clamp on reduction rings. The UMB-1 is designed to be user upgradable and quick to transition from clamp on, to swing away, to ultralight when using a stabilizer. UMB-1 Universal Mattebox Clamp On Included Components 2 x rotating 4x5.65 filter stages1 x Folding French flag1 x Clamp on adapter set1 x NATO standard accessory rails on left, right, and top Included Clamp On Adapters 80mm87mm95mm104mm110mm114mm125mm134mm136mm
Wooden Camera UMB-1 Universal Mattebox (Pro) SKU: 202100 UMB-1 Universal Mattebox (Pro) is natively 15mm LW rod based and comes standard with two rotating 4x5.65 filter stages (with an optional third stage available), individual tray catchers, folding French flag, 143mm native diameter opening, NATO standard accessory rails on left, right, and top for attaching accessories, ARRI style rubber bellows with 114mm standard opening, a complete set of bellows reduction rings, a universal cloth donut for non-standard lens diameters, a height adjustable swing away bracket, left and right side flags, bottom flag, and a full set of clamp on adapter rings. The UMB-1 is designed to quickly transition from swing away, to clamp on, to ultralight when using a stabilizer. Reduction rings snap into the bellows quickly making lens transitions fast and easy. Another great feature of these reduction rings is that they are compatible with all 3rd party 114mm threaded bellows since they have specially designed tabs. Adaptable to 15mm Studio and 19mm via the Universal Mattebox (15mm Studio Adapter) and Universal Mattebox (19mm Adapter).This kit ships in a box with custom cut foam. The custom foam can be removed and installed into a Pelican 1550 hard case (not included). Included Components Swing Away Bracket2x rotating 4x5.65 filter stagesFolding French flag143mm rubber bellows with 138mm round filter slotSwing away insert setNATO standard accessory rails on left, right, and topClamp on adapter setUniversal cloth donutLeft and right side flagsBottom flag Included Reduction Rings 80mm87mm95mm104mm110mm Included Clamp On Adapters 80mm87mm95mm104mm110mm114mm125mm134mm136mm
Wooden Camera UMB-1 Universal Mattebox Swing Away SKU: 202000 UMB-1 Universal Mattebox (Swing Away) comes standard with two rotating 4x5.65 filter stages (with an optional third stage available), individual tray catchers, folding French flag, 143mm native diameter opening, NATO standard accessory rails on left, right, and top for attaching accessories, ARRI style rubber belows with 114mm standard opening, a complete set of clamp on reduction rings, and a height adjustable swing away bracket. The Wooden Camera UMB-1 is designed to be user upgradable and quick to transition from swing away, to clamp on, to ultralight when using a stabilizer. Reduction rings snap into the bellows quickly making lens transitions fast and easy. Another great feature of these reduction rings is that they are compatible with all 3rd party 114mm threaded bellows since they have specially designed tabs. UMB-1 Universal Mattebox Swing Away Included Components 1 x Swing Away Bracket2 x rotating 4x5.65 filter stages1 x Folding French flag1 x 143mm rubber bellows with 138mm round filter slot1 x Swing away insert set1 x NATO standard accessory rails on left, right, and top1 x Universal cloth donut Included Reduction Rings 80mm87mm95mm104mm110mm
Wooden Camera WC Coiled BNC to BNC (10") SKU: 206300 Extends from 10" resting lenth to 20" to allow mobility and adjusting of on board monitors, wireless systems, and recorders. Ideal for Teradek wireless systems and Steadicam configurations. Excellent for studio configurations as well as patching. Also available in 20" length.Weight 88 gDimensions 245.0 mm x 31 mm x 16.5 mmResting length 25 cmFully stretched length 50 cm
Wooden Camera WC Coiled BNC to BNC (20") SKU: 206400 Coiled HD-SDI - BNC to BNC cable extends from 20" resting lenth to 36" to allow mobility and adjusting of on board monitors, wireless systems, and recorders. Ideal for Teradek wireless systems and Steadicam™ configurations. Excellent for studio configurations as well as patching. Also available in 10" lengthWeight 88 gDimensions 245.0 mm x 31 mm x 16.5 mmResting length 50 cmFully stretched length 91.44 cm
Wooden Camera Zip Box Double 4x5.65 (90-95mm) SKU: 241700 Wooden Camera Zip Box Double 4x5.65 (90-95mm) holds two 4x5.65" (100x144mm) filters and clamps to the front of lenses between 90 and 95mm in exterior lens diameter. The lens shade design allows for even the widest lenses and sensor sizes to be covered without vignetting. Zip Box Double is extremely lightweight and weighs about the same as a standard filter which makes it perfect for gimbal and drone use. Stainless steel components and unibody rubber design are very durable and stand up to the toughest conditions. It is important to note that you should measure based on outside lens diameter and not based on the threaded filter ring size.
Wooden Camera Zip Box Flag Set (Top and Sides) SKU: 242500 Wooden Camera Zip Box Flag Set (Top and Sides) includes three clip on flags compatible with all Zip Boxes (4x4, 4x5.65, and 138mm Round). The flags are made of a lightweight plastic material and clip securely without tools. Includes 1x Top Flag 2x Side Flag Side FlagWeight: 18gDimensions: 203.2 x 101.6 x 2.54 mmTop Flag Weight: 24gDimensions: 254 x 114.3 x 2.54 mmAll Weight: 70gDimensions: 25.4 x 177.8 x 330.2 mm