Chrosziel MB450R2 + FF DSLR 2 SKU: 450R2-DSLR2KIT Kit DSLR 2 MB450R2 and Follow Focus for Canon EOS 5DNikon D800Nikon D90Panasonic DMC-GH3Blackmagic Pocket Camera incl. 450-R2 MatteBox with french flag (450-11)pivot-mech. for optional sidewingsbracket for Ø15mm rodsend plate w. thread Ø114/110mm (450-20)Flexi-Insertring 110:75/98mm (450-22)Flexi-Insertring 110:50/85mm (401-453)LWS 15 HD DSLR (206-60S)DV StudioRig plus (206-12)Focus Drive mod 0.8, Ø 36,8mm (206-30)3 x FlexiGearRing Ø 60-120mm2 rotat. filterholders4x4 (402-12)+ multi4x4/4x5.650 (410-04)
Chrosziel MA-EPL-HR12 The Chrosziel Meta Mount is a Sony E camera to PL lens “hot mount” adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens. When the Meta Mount is used with cine lenses with LDS or Cooke/i Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing. When the Meta Mount is used with an ENG servo motor-controlled broadcast lens the Focus/Iris/Zoom servo’s can be controlled through the camera and are compatible with the Sony FX9 / FX6 / FX3 hand grips, RCP or camera’s web GUI. This allows for easy and full control of an ENG broadcast lens through a Sony E mount camera. The Meta Mount is shimmable with the included shim set for the E-mount. Key Features Sony E Mount Camera to PL mount LensElectronic contacts for metadata communication and lens controlLens metadata displayed in camera and recorded to fileShimmable E MountFull focus/Iris/Zoom control on servo motor ENG lenses Technical data E Mount camera to PL mount lensContact and electronics for Metadata communication12-pin Hirose out for ENG lens control3/8th lens support socketUSB Type min A-B (for firmware updates only)Power supply 10-16V (Lemo compatible 0B 5-pin)Power consumption max. ca. 350mAh @ 12V In the box 1x Meta Mount E-to-PL adapter (MA-EPL-HR12)1x MN-AB (power supply cable 12 Volt A/B D-Tap – 0B 5-pin Lemo)1x F55-A2-P-CAM1x Shim Set, E-Mount side1x USB Mini Adapter
Chrosziel MagNum 200 Kit MN-200KIT-H21 MagNum Lens Control (w. Hedén) for focus, iris and camera record start/stop, 16 frequency channels in the range of 2,4 GHz and 433 MHz. USB port, serial interface, BNC socket for cable or antenna, 4 hotkeys. Compatible also for wired analogue zoom demands. MN-200KIT-H21 includes Transmitter (handunit MN-200T) with large scale (201-041) and hand strapReceiver (motor controller MN-200R)2 Antennas (FANT)battery type FM50 (MN-BAT)Charger (MN-CH)Neck strap (STR2)2 M26VE Hedén motors2 Motor cables 60 cm (MOTD60)D-Tap power cable (MN-AB)Bracket f. receiver (MN-RMB1)Manualhard case (MN-CASE)
Chrosziel MagNum Mini Kit SKU: MN-MINIKIT-0 MagNum Mini KIT without motor, Single Channel, Lens Control for Focus, 2.4 GHz, Camera RUN start/stop, Spectrum analyzer, includes MN-MINI-R Receiver/Motor Controller with antenna (FANT-G)MN-100T Transmitter (hand unit) w. hand strap and neck strap (STR2)MOTD60-S MagNum Mini Motor Cable 60cmMN-RMB1 mounting bracket f. receiverMN-BAT Battery type FM50, MN-CH ChargerMN-AB Power cable D-TapMN-CASE hard case
Chrosziel MagNum Mini Receiver with Antenna SKU: MN-MINI-R MagNum Mini Receiver/Motor Controller, 2.4 GHz with antenna
Chrosziel MagNum MN-200 Chrosziel MagNum lens control for focus, iris and camera record start/stop, several frequencies in the range of 2,4 GHz a. 433 MHz. USB port, serial interface, BNC socket for cable or antenna, hotkeys. Compatible also for wired analogue zoom demands. Chrosziel MN-200 includes operating unit/transmitter w. hand strap (MN-200T)motorcontrol unit/receiver (MN-200R)2 antennasbattery type FM50/55chargerneck strapmanual (add. needed: cables, bracket and digital motors)
Chrosziel MagNum Power 12V AB D-Tap SKU: MN-AB Power Cable 12 Volt A/B D-Tap - MagNum Lemo 0B 5pin (also compatible with Aladin MRKII / AL2-INTF)
Chrosziel MagNum Single Channel Transmitte SKU: MN-100T MagNum Single Channel operating unit/ transmitter 2,4 GHz w. hand strap
Chrosziel Matte Box MB 450-R11 Product code: 450-R11 Chrosziel MatteBox 450R1 incl. french flag, 1 rotatable filterholder multi format 4x4/4x5.650 (410-04), bracket for Ø15mm rods, cover end plate with thread Ø114,110mm.
Chrosziel Matte Box 450-R21 MB 450R2 (114/110) Product code: 450-R21 Chrosziel MatteBox 450R2, with Double-Rotating-Filter Stage, incl. mask 16:9, french flag (450-11), pivot mechanism for optional side wings, rotatable filterholders 4x4 (402-12) and multiformat4x4/4x5.650 (410-04), rod clamping Ø15mm rods, cover end plate Ø114/110mm
Chrosziel Matte Box MB 450W-20 Product code: 450W-20 MatteBox 450W Super Wide MatteBox for wide-angle lenses, with Double-Rotating Filter Stage, incl. french flag (450-11), 2 filterholders multiformat 4x4/4x5.650 (410-31), bracket for Ø15mm rods & clamp adapter Ø130mm.
Chrosziel Matte Box 450-R21DC Product code: 450-R21DC MatteBox 450R2-DSWC, Direct-Swing-Away System with Double-Rotating-Filter Stage, incl. mask 16:9, french flag (450-11), pivot mechanism for side wings (option), rotatable filterholders 4x4 (402-12) and multi-format4x4/4x5.650 (410-04), clamp-bracket for Ø15mm rods, cover end plate with thread Ø114/110mm.
Chrosziel Matte Box 450-R31 Product code: 450-R31 MatteBox 450R3 with Triple-Rotating-FilterStage, incl. mask 16:9, french flag (450-11), pivot mechanism (for optionally use of side wings), rotatable filterholders 4x4 (1x 402-12) and multi-format 4x4/4x5.650 (2x 410-04), bracket for Ø15mm rods, cover end plate with thread Ø114/110mm.
Chrosziel Matte Box 450-R31DC Product code: 450-R31DC MatteBox 450R3-DSWC, Direct Swing Away System with Triple-Rotating-FilterStage, incl. mask 16:9, french flag (450-11), pivot mechanism (for sidewings), rotatable filterholders 4x4 (1x 402-12) and multi-format 4x4/4x5.650 (2x 410-04), clamp-bracket for Ø15mm rods, end plate with thread Ø114/110mm.
Chrosziel MagNum on/off LANC MN-COFL Chrosziel MagNum Kamerakabel start/stopp Lemo 0B 9pin - 2,5mm Klinkenstecker, für LANC (TM) Anschluß (div. Kameras)
Chrosziel Mount Adapter Burano-to-PL SKU: MA-BURPL-HR12 The Chrosziel Burano Mount is a Sony Burano camera to PL lens “hot mount” adapter with metadata communication. Each mount has the required pin contacts necessary to transmit lens metadata through to the camera and conversely the contacts provide lens control through a 12-pin Hirose out connection to an ENG lens. When the Burano Mount is used with cine lenses with LDS or Cooke /i-Data the metadata such as iris setting, focus distance and zoom focal length are transmitted through the adapter and appear in the viewfinder, on the monitor and are recorded in the video file for use in post processing. Using the Burano Mount with an ENG servo motor-controlled broadcast lens, the Focus/Iris/Zoom servo’s can be controlled through the camera and are compatible with the Sony Burano GP-VR100 hand grip, Sony FX9 top handle, RCP or camera’s web GUI. This allows for easy and full control of an ENG broadcast lens through the Sony Burano camera. The Meta Mount is shimmable with the included shim set. Key Features Sony Burano Mount Camera to PL mount LensElectronic contacts for metadata communication and lens controlLens metadata displayed in camera and recorded to fileShimmable with included shimsFull focus/Iris/Zoom control on servo motor ENG lenses Technical data Burano Mount camera to PL mount lensContact and electronics for Metadata communication12-pin Hirose out for ENG lens controlMounted with 5 screws to the native camera bodyUSB Type min A-B (for firmware updates only)Power supply 10-16V (Lemo compatible 0B 5-pin)Power consumption max. ca. 350mAh @ 12V In the box 1x Burano Mount PL adapter (MA-BURPL-HR12)1x MN-AB (power supply cable 12 Volt A/B D-Tap – 0B 5-pin Lemo)1x F55-A2-P-CAM1x Shim Set
Chrosziel CDM-PREM-FIZ The Chrosziel CDM-PREM-FIZ Full Servo Drive Unit was developed exclusively with all three Fujinon Premista Lenses and is field installable. This compact and ergonomic design allows you to integrate the all-manual “cine style“ Fujinon Premista lens into your broadcast, multi-camera and remote head workflows in a very simple way, because you have all components in one housing. Three perfectly positioned drive gears engage the Fujinon Premista lens with a high degree of precision, employing three powerful digital cine motors. The Chrosziel CDM-PREM-FIZ is particularly useful for cinematic multicam, ENG and OB work, where zoom and focus can be controlled from standard Fujinon TVstyle tripod controls or the handheld zoom rocker switch. It supports remote head and robotics applications via the Hirose 20pin Fujinon remote interface, which also allows the Chrozsiel Magnum wireless FIZ unit and all other compatible brands of FIZ to control the drive’s focus, zoom and iris. TECHNICAL SPECIFICATIONS Demand Input Focus (analog/digital 16-bit)Demand Input Zoom (analog/digital 16-bit)Standard Fujinon Digipower Control ProtocolsExternal Power recommended for maximum performance/i and eXtended data pass thru Weight: approx. 1.2 KG (2.6 lbs) CONNECTOR OVERVIEW Power: Lemo-compatible 0B.305Lens-Port: 12 Pin-Hirose socketFocus-Demand 12 Pin Hirose Socket (Fujinon standard – Pinout) Zoom-Demand 12 Pin Hirose Socket (Fujinon standard – Pinout)Remote (Hirose 20 Pin) KEY FEATURES Compatible with Premista 19-45, 28-100, 80-250/i eXtended data pass thru for augmented/ virtual production workflowsUser installable drive unitLightweight (approx. 1.2 kg/2.6 lbs.)Fujinon Digipower Protocols enable seamless use in robotic and remote head applicationsUSB Port for software updatesWide range of power input (12V-30V DC)Built-in adjustable speed zoom rocker What is in the box? 1x CDM-PREM-FIZ – Full servo drive 1x MN-AB-A - Power Cable 12 Volt A/B D-Tap1x AL2-INTF-LP – Connection Cable Lensport 1x Allen Key
Chrosziel Swing-Away MatteBox Kit MB 565 Double for 15 mm rods SKU: 565-05-KIT-15-45-SW Swing-Away MatteBox MB 565 Double 15, for Cine FullFrame cameras, includes: Clamp adapter w. Ø 150mm 565-00-SW15: Swing-Away arm for Ø 15mm rods (adjustable +/- 5mm hor./vert., tilting) 501-26: French Flag 510-07: 2 Filterholder comb. 4x5.650hor./4x4, each independently 360°rotating, 565-00-12: Pivot mechanism (left/right ) 410-200: 1 set of side wings 501-11: 1 set of rosettes for handles 565-00-11: Accessory bar w. adjustable slider 510-19: filter tray catcher 510-54: FlexiBellows 565-CASE: Case with insert
Chrosziel Universal Iris Motor for cine lenses and Hirose 12pin output cameras SKU: CDM-UNI-I The universal Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-UNI-I fits seamlessly into the operating functions of any camera with Hirose 12pin lensport communcation. The servo drive is controlled via the 12pin Hirose output of the camera. The motor control can be addressed via the camera-specific Broadcast protocol and also works in conjunction with e.g. the MetaMount E-to-PL adapter. The Chrosziel Universal Iris Motor now allows optimal use of all manual zoom and prime lenses together with any camera with Hirose 12pin output. For this purpose, the Iris motor is slid onto a 15mm rod and swiveled onto the zoom or prime lens. The curled Hirose 12pin cable establish the connection with the camera. For setup, the cable is connected to the Hirose 12pin socket of the camera. The motor automatically calibrates itself and finds the endstops of the lens. For metadata calibration, the motor needs to learn T-Stop 4 and 16. With the press of the only button, the motor goes into passive mode and the user can turn the motor without resistance. The motor is turned to T-Stop 4 and the the press of the button confirms the position. Afterwards the motor is turned to T-Stop 16 and the position is confirmed with another press of the button. Ready! FEATURES Universal Iris motorThe Iris Motor is a compact and universal Iris motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod.Controlled via any Hirose 12pin camera outputThe camera's Hirose 12pin Lensport output controls directly the Iris motor unit.Remote Iris and AutoIris controlUse the Iris motor in a remote setup and control it via the RCP or WebGUI of any camera with Hirose 12pin connector. Or switch on the AutoIris functionality of your camera and the camera uses the Chrosziel Univeral Iris Motor for AutoIris control. Technical data Standard Lensport communication connector (Hirose 12-pin)15mm Rod Mounting Bracket Torque 0.5NmPower consumption max. approx. 350mAh @ 12V IN THE BOX 1x CDM-UNI-I Digital motor unit1x Gear Drive, mod. 0.8 (Ø 40mm)1x Gear Drive, mod. 0.8 (Ø 60mm)
Chrosziel ZOOM SERVO DRIVE FOR FUJINON XK LENS SKU: CDM-XK-Z2 Developed for the Fujinon XK6x20 20-120 mm zoom lens the CDM-XK-Z enables ways of creativity that may be impossible just by zooming manually. To simplify the operator’s workflow the zoom servo drive is directly mounted onto the lens by two captive screws. The weight of the Chrosziel CDM-XK-Z including digital motor, gear, PCB with CPU, screws and cabling is 0.44 lbs. (197 gram). With the zoom servo drive Chrosziel addresses camera operators who are working in the broadcast and documentary sector looking for a reasonably priced zoom servo drive. All camera control signals forwarded Control commands (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera via the LANC protocol. By using a Sony PXW-FS5 or a Sony PXW-FS7 camera with a SWIT battery a D-Tap to a (straight or angled) Lemo compatible 5-Pin power cable is used (Chrosziel order numbers: MN-AB-A with angled Lemo compatible socket / MN-AB with straight Lemo compatible socket). The two Jack-Jack cables are forwarding the control commands from the hand grip. If e.g. a Panasonic Varicam, Sony PMW-F5 or Sony PMW-F55 are used a combined cable with power and start / stop is required, like a Hirose 4-Pin to a (straight or angled) Lemo compatible 5-Pin cable (Chrosziel order numbers: F55-A2-PCAM-A with angled Lemo socket / F55-A2-PCAM with straight Lemo compatible socket). Also, the two Jack-Jack cables are forwarding the control commands from the hand grip. Also, Chrosziel offers a variety of power cables with straight and angled plugs for all types of camera power out sockets and batteries including camera run / stop functionality. Features SINGLE UNIT MOUNTED ONTO LENSTwo captive screws keeping the single servo drive unit permanently fixed onto lens.CONTROLLED VIA SONY FS & LANC HANDGRIPThe Sony FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip.CAMERA CONTROL SIGNALS FORWARDEDControl signals (e.g. menu / user buttons / focus magnification / camera run & stop) are immediately looped through to the camera.4 ZOOM MODESEB / Documentary, Live / Hardcut, Silent, Direct Mode Zoom modes EB / Documentary ModeDesigned for long and smooth zoom drives with the CDM-LWZ3-Z it offers slow creeping zoom transitions while keeping the motive perfectly framed.Silent ModeTo reduce the sound of the zoom servo drive the maximum speed of its motor is limited to 40 percent making the setup almost inaudible.Live / Hardcut ModeTo catch the best moments, the Live / Hardcut Mode is useful. It uses 80 percent of the maximum speed capacity of the motor offering fast zoom drives but with Soft Ramping.Direct ModeThe Direct Mode finally uses the full speed capacity of the Zoom Servo Drive. The LANC commands are implemented instantaneously without ramping and smooth transitions. Useful for B camera operators catching snaps shots from the concert.
Chrosziel ZOOM SERVO DRIVE FOR ZEISS LIGHTWEIGHT ZOOM LWZ3 21-100 MM SKU: CDM-LWZ3-Z2 Chrosziel ZOOM SERVO DRIVE CDM-LWZ3-Z2 - compact control-unit for Zeiss Zoom LWZ.3 21-100mm for controlling zoom. For usage with original Sony handgrip (PXW-FS5, PXW-FS7) or LANC zoom devices. The CDM-LWZ3-Z2 is designed for the Zeiss Lightweight Zoom LWZ 21-100 mm/T2.9-3.9 T zoom lens (ZEISS LWZ.3). With the Zoom Servo Drive Chrosziel addresses camera operators working in the broadcast, documentary, and related sectors offering a reasonably priced device enabling creative processes that may be impossible while pulling zoom manually. The Zoom Servo Drive adds only indispensable weight to the setup. It contains one digital servo motor, the gear and a PCB with CPU in one single housing. The mounting of the Zoom Servo Drive makes the operator’s workflow comfortable. Just three captive screws are needed to mount it onto the Zeiss Lightweight Zoom (LWZ.3). Sony handgrip / other LANC handgrips with zoom rockers are working, tooZoom Servo Drive CDM-LWZ.3-Z2 with 4 enhanced zoom modesZeiss Lightweight Zoom LWZ.3 21-100 mm/T2.9-3.9 T zoom lens (ZEISS LWZ.3)Chrosziel Light Weight Support 401-FS5 Features CONTROLLED VIA SONY FS & LANC HANDGRIPControl directly the zoom servo drive via optically de-coupled LANC sockets and Sony FS5 / FS7 handgrip zoom rocker. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip.CAMERA CONTROL SIGNALS FORWARDEDControl commands are immediately looped through to the camera (e.g. menu / user buttons / focus magnification / camera run & stop).SINGLE UNIT MOUNTED ONTO LENSThree captive screws keeping the single servo drive unit permanently fixed onto lens.4 ENHANCED ZOOM MODESEB / Documentary, Live / Hardcut, Silent, and Direct Mode In the box 1x digital servo-motor-unit1x LANC cable1x LANC extension cable1 x MN-AB (powercable 12 Volt A/B D-Tap 0B 5pin)1x Allen Key1x Mini-USB-adapter
Chrosziel Zoom-Motor Angenieux EZ1-2 SKU: CDM-EZ-Z2 Chrosziel CDM-EZ-Z2 - compact control-unit for Angenieux EZ-1 and Angenieux EZ-2 for controlling zoom. For usage with orig. Sony handgrip (PXW-FS5, PXW-FS7, PXW-FX9) or LANC zoom devices. Incl. 1x digital servo-motor-unit, 1x LANC cable, 1x LANC extension cable, 1x CAB-FX9 Sony Multi cable, 1 x MN-AB-A90 (powercable 12 Volt A/B D-Tap 0B 5pin angled), 1x Allen Key, 1x Mini-USBadapter.
Chrosziel Zoomer SKU: CDM-UNI-Z2 The Zoomer is a compact and universal zoom motor that can be pivoted to almost any lens by simply mounting it on a 15mm rod. The universal motor unit CDM-UNI-Z2 fits seamlessly into the operating functions of the Sony cameras of the FX9 / FX6 / FS7 / FS5 series. The servo drive is controlled via the zoom rocker on the handle. The motor control can be addressed via Sony's camera-specific protocol and also works independently of the camera signals when a LANC zoom rocker is plugged directly into the servo. Due to the included Chrosziel Flexi toothed ring (#206-30), the Zoomer can be used with almost any zoom lens even without toothing. The multi-function handgrip, which in addition to the recording function and a zoom rocker also provide control over the camera menu and other freely selectable functions, are extremely popular on current video cameras with large sensors and are indispensable for effective operation. The Chrosziel Universal Zoom Servo Drive now allows optimal use of all manual zoom lenses together with the multi-function handgrip. For this purpose, the Zoomer is slid onto a 15mm rod and swiveled onto the zoom lens. Two plug-in cables establish the connection with the camera. One cable is used for the power supply from the camera battery, the second for the connection to the control commands between the handle and the camera. When using a standard LANC zoom rocker or handle with the Sony PXW-FS5, PXW-FS7 and PXW-FS7II, the servo is connected between the handle and the camera via an input and an output jack to receive all zoom control signals. For setup with the Sony PXW-FX9 camera, a Y-cable is used that accepts the Sony multi-connector and connects to both the input jack of the Zoomer and the input jack of the camera. For the Sony ILME-FX6 camera, a Y-cable is used and connects the 3.5mm connector of the Sony handgrip, input jack of the Universal Zoom Servo Drive, and the Sony camera. FEATURES Universal zoom motorControlled via Sony and LANC handgripCamera control signals forwarded Technical data Power supply 10-30V (Lemo compatible 0B 5-pin)2.5mm socket (control command In)3.5mm socket (control command In&Out)USB Type min A-B (firmware updates)Torque 0.5NmPower consumption max. approx. 350mAh @ 12V IN THE BOX 1x CDM-UNI-Z2 Digital motor unit1x LANC cable1x LANC extension cable1x MN-AB-A90 (power supply cable 12 Volt A/B D-Tap – angled 90° rotated 0B 5pin) 1x 206-30 Flexi Gear Ring (Ø 60-120mm)1x Gear Drive, mod. 0.8 (Ø 40mm)1x CAB-FX9 for Sony PXW-FX9 compatibility1x CAB-FX6 for Sony PXW-FX6 compatibilityUSB Mini Adapter
Computar 2/3″ 5mm F2.8 C-Mount lens SKU: M0528-MPW3 This super high resolution lens is perfect for wide angle 4K shooting that’s free of fisheye distortion! This exceptional lens produces outstanding results with Back-Bone modified GoPro cameras or any other 1/2″ or 2/3″ C-Mount camera. It features focus and iris locking screws and 72mm filter threads. 6 iris blades make for a pleasing cinematic bokeh. Add additional 1mm C-Mount spacers for stunning macro. It’s compact size and low weight make it a perfect companion for your modified GoPro camera! 35mm equivalent focal length ~28mm. Technical Information Format: 2/3″Focal Length: 5mmAperture: F2.8 – F16Iris Type: Manual IrisHorizontal FOV: ~60 degrees (on Back-Bone modified GoPro)Mount: C-MountWeight: 162 g Features Manual focus / iris72mm filter threadsFocus and iris locking screws6 iris blades Compact