MID49 UltraSync ONE Clamp (Atomos, Timecode Systems)SKU: M49-CAG-USOCUltraSync ONE Clamp attaches the Atomos / Timecode Systems UltraSync ONE to an ARRI 1/4-20 with locating pins adjacent using a captive thumbscrew. The clamp can be configured in several ways depending on the desired position.Weight: 40gDimensions (WxLxH): 60.2 x 22.3 x 14 mm
MID49 Universal ARCA ClampSKU: M49-ATM-UNIUniversal ARCA Clamp attaches to tripod plates using 1/4-20 and 3/8-16 threaded holes on the bottom. It can also be bolted down to cameras, cheeseplates, or other devices using 4 included 1/4-20 x 1/2 socket button head screws. Front-to-back 1/4-20 screw channels accommodate spacing up to 30mm apart center-to-center. Side-to-side 1/4-20 screw channels accommodate spacing up to 60mm apart center-to-center.
MID49 Universal Speedball Clamp OnlySKU: M49-SPD-CLM-0 Universal Speedball Clamp Only attaches two Universal Speedballs or any other brand of 25mm ball attachment like Ultralight Control Systems, Wooden Camera, etc. "Chip Clip" clamp design allows for easy, annoyance-free installation. Ratcheting thumbscrew can be pulled out and repositioned.Weight: 68gDimensions (WxLxH): 63 x 25 x 60mm
MID49 Universal Speedball Extension OnlyUniversal Speedball Extension only comes in a 3 inch, 6 inch, 9 inch version, or a bundle that includes all three lengths. The three versions of extension arms can be nestled together in a bundle, saving space in your kit. Each arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.3inch extension: 45g / 25 x 25 x 95mm6inch extension: 45g / 25 x 25 x 171mm9inch extension: 73g / 25 x 25 x 247mm
MID49 Universal Speedball Extension OnlyUniversal Speedball Extension only comes in a 3 inch, 6 inch, 9 inch version, or a bundle that includes all three lengths. The three versions of extension arms can be nestled together in a bundle, saving space in your kit. Each arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.3inch extension: 45g / 25 x 25 x 95mm6inch extension: 45g / 25 x 25 x 171mm9inch extension: 73g / 25 x 25 x 247mm
MID49 Universal Speedball Extension OnlyUniversal Speedball Extension only comes in a 3 inch, 6 inch, 9 inch version, or a bundle that includes all three lengths. The three versions of extension arms can be nestled together in a bundle, saving space in your kit. Each arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.3inch extension: 45g / 25 x 25 x 95mm6inch extension: 45g / 25 x 25 x 171mm9inch extension: 73g / 25 x 25 x 247mm
MID49 Universal Speedball Extension OnlyUniversal Speedball Extension only comes in a 3 inch, 6 inch, 9 inch version, or a bundle that includes all three lengths. The three versions of extension arms can be nestled together in a bundle, saving space in your kit. Each arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.3inch extension: 45g / 25 x 25 x 95mm6inch extension: 45g / 25 x 25 x 171mm9inch extension: 73g / 25 x 25 x 247mm
MID49 Universal Speedball Monitor Arm (3 Inch)SKU: M49-SPD-ARM-3 Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20.Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads.The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws.Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Product Weight: 314gProduct Dimensions (WxLxH): 63 x 25 x 273mm
MID49 Universal Speedball Monitor Arm (6 Inch)SKU: M49-SPD-ARM-6 Universal Speedball Monitor Arm (6 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 6 inch (150mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 6 inch arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Product Weight: 331gProduct Dimensions (WxLxH): 63 x 25 x 349mm
MID49 Universal Speedball Monitor Arm (9 Inch)SKU: M49-SPD-ARM-9 Universal Speedball Monitor Arm (9 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 9 inch (225mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 9 inch arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Product Weight: 348gProduct Dimensions (WxLxH): 63 x 25 x 425mm
MID49 Universal Speedball Monitor Mount SKU: M49-SPD-ARM-0 Universal Speedball Monitor Mount is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end and one double-ball clamp. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly.The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Weight: 201gDimensions (WxLxH): 63 x 25 x 152mm
MID49 Upper Cage for Canon C50SKU: M49-CAG-CAN-C50Upper Cage for Canon C50 is a form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. The included HDMI lock with reduction inserts protects the camera's HDMI port from abuse.Left side camera tie-down keeps the C50 from tipping under the force of focus motors. Rear handle tie-down adds stability to the handle-body connection when using heavy lenses.Lower ARCA Swiss dovetail has an adjustable lens support clamp with three included lengths of 1/4-20 support screw that attach to 3rd party lens adapters like Metabones, etc.ARCA Swiss dovetail attaches to the Baseline 15mm Baseplate to provide rods at the correct lens height, which is sold separately.
MID49 Upper Cage for Canon C80SKU: M49-CAG-CAN-C80 Upper Cage for Canon C80 is a form-fitting cage with 1/4-20, 3/8-16 with ARRI accessory pins, and M4x20mm ARRI-spaced threaded holes in several places. In the center channel, a replica of the Canon striped rosette allows the C80's original handle to be attached. The included top accessory rod holds a combination hot shoe, ARRI 3/8-16, M4x20, and the Canon mic hole pattern for attaching the C80's original microphone shock mount.A special 1/4-20 recess at the end of the rod holds the Audio Breakout AB-4 (Canon C70/C80) which is available as an optional add-on, and converts the camera's two mini XLRs to standard, full-size XLRs. HDMI protector clamps cables securely, and front lens support mount attaches to 3rd party lens adapters like Metabones, etc.Top ARCA Swiss dovetail slot accepts products like our ARCA Top Handle or ARCA Top Plate which are sold separately. Lower ARCA Swiss dovetail attaches to our Baseline 15mm Baseplate to provide rods at the correct lens height and is also available separately.Weight: 438gDimensions (WxLxH): 438 x 132x 162mm
MID49 Upper Cage for Nikon ZRSKU: M49-CAG-NIK-ZR Upper Cage for Nikon ZR is a form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. The swing-away HDMI lock protects the camera's micro-HDMI port from abuse while allowing the dust cover to be accessed. The combination battery/CF Express door on the bottom is unobstructed for easy card changes. Lower ARCA Swiss dovetail has an adjustable lens support clamp with three included lengths of 1/4-20 support screw that attach to 3rd party lens adapters like Metabones, etc.Weight: 438g
MID49 Upper Cage for Sony FX2SKU: M49-CAG-SON-FX2Upper Cage for Sony FX2 is a form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. The swing-away HDMI lock with reduction inserts protects the camera's HDMI port from abuse and ties into the camera's threaded hole on the side to prevent tipping under the force of focus motors. An included handle tie-down for the Sony XLR-H1 audio handle adds stability to the setup, reducing stress on the MI Shoe connection when using heavy lenses.Lower ARCA Swiss dovetail has an adjustable lens support clamp with three included lengths of 1/4-20 support screw that attach to 3rd party lens adapters like Metabones, etc.ARCA Swiss dovetail attaches to the optional Baseline 15mm LW (Upper Cage Sony FX2), sold separately, to provide rods at the correct lens height
MID49 Upper Cage for Blackmagic Pocket 6K (Full Frame, Pro, G2)SKU: M49-CAG-BMD-P6K Upper Cage for Blackmagic Pocket 6K (Full Frame, Pro, G2) is a form-fitting cage with 1/4-20, 3/8-16 with ARRI accessory pins, and M4x20mm ARRI-spaced threaded holes in several places. Included 15mm accessory rods provide threaded holes, a shoe mount, and special recess for the Audio Breakout AB-6 (Blackmagic Pocket 6K), which is available as an add-on, and converts the camera's two mini XLRs to two standard, full-size XLRs. HDMI and USB protector clamps cables securely, and front lens support mount attaches to 3rd party lens adapters like Metabones, etc. Top ARCA Swiss dovetail slot accepts products like our ARCA Top Handle or ARCA Top Plate which are sold separately. Lower ARCA Swiss dovetail attaches to our Baseline 15mm Baseplate to provide rods at the correct lens height and is also available separately.
MID49 Upper Cage for Canon C70 SKU: M49-CAG-CAN-C70 Upper Cage for Canon C70 is a form-fitting cage with 1/4-20, 3/8-16 with ARRI accessory pins, and M4x20mm ARRI-spaced threaded holes in several places. Included 15mm accessory rods provide threaded holes, a shoe mount, and special recess for the Audio Breakout AB-4 (Canon C70) which is available as an add-on, and converts the camera's two mini XLRs to standard, full-size XLRs. HDMI protector clamps cables securely, and front lens support mount attaches to 3rd party lens adapters like Metabones, etc. Top ARCA Swiss dovetail slot accepts products like our ARCA Top Handle or ARCA Top Plate which are sold separately. Lower ARCA Swiss dovetail attaches to our Baseline 15mm Baseplate to provide rods at the correct lens height and is also available separately.
MID49 Upper Cage for FUJIFILM GFX100 II SKU: M49-CAG-FUJ-G100ii Upper Cage for FUJIFILM GFX100 II is a form-fitting cage with 1/4-20, 3/8-16 with ARRI accessory pins, and M4x20mm ARRI-spaced threaded holes in several places. Included 15mm accessory rods provide threaded holes, a shoe mount, and special recess for the Audio Breakout AB-3 which is available as an add-on, and converts the camera's two mini XLRs to two standard, full-size XLRs.HDMI and USB protector clamps cables securely, and front lens support mount attaches to 3rd party lens adapters like Metabones, etc.Top ARCA Swiss dovetail slot accepts products like our ARCA Top Handle or ARCA Top Plate which are sold separately.Lower ARCA Swiss dovetail attaches to our Baseline 15mm Baseplate to provide rods at the correct lens height and is also available separately.
Middle Things APC-R MiniThe APC-R Mini enables you to combine your favorite lenses, cameras, and gimbals into a high-quality affordable remote camera, seamlessly fitting into your live production workflow. It serves as an alternative to all-in-one PTZ heads, offering the advantage of larger sensors and custom lenses.Mounting the Middle Things APC-R Mini on your gimbal will allow for multiple control options over the network, straight from the live control roomUSB Gaming JoysticksMiddle RemoteBitFocus CompanionTCP Access with the SDK/API The APC-R Mini connects to and draws power directly from the RSA accessory port of your DJI RS2, RS3 Pro, RS4, or RS4 Pro gimbal.You can then connect it to your network using LAN Ethernet (recommended) or Wi-Fi. Using the Middle Control software, you can control up to 8 DJI gimbals remotely from a single laptop, using the Middle Remote or a USB gaming controller and over long distance Ethernet, just as a regular PTZ camera. Technical SpecsInput Power: Directly from the gimbal or USB-C (5V max)Power consumption: 1WBluetooth Wireless Frequency: 2.4GHzWiFi Wireless Frequency: 2.4GhzWeight: 54gWidth: 3.2cm x 2.4cm x 9.5cmStorage Temperature: -10 to 60°CPackage Weight: 0.07kg
Middle Things Middle RemoteDesigned to be used with our free Middle Control Software, the Middle Things Middle Remote lets you control your gimbal and camera through a single compact & professional PTZ remote! With the Middle Remote, you can adjust a good number of camera settings such as Pan / Tilt / Zoom / ISO, White Balance, Tint, IRIS, Focus, Contrast, Saturation, White / Black LevelIf you use a Blackmagic Design ATEM, the Middle Remote displays are synced from the ATEM so that your values are always up to date!The Middle Remote can either be used to controlBlackmagic Design cameras controlled with an ATEM (Blackmagic ATEM required in that scenario)Blackmagic Design cameras and select DJI gimbals using the Middle Things APC-R. For more info on supported gimbals & cameras, check out the APC-R compatibility.Make Pro X Glue software (free) and Middle Control Software (free) are required to use the remote. Available on Mac OS (Big Sur or later ) and Windows 10/11.In the Box1x Middle Remote Unit1x USB type C cable1x Sticker Pack
MTF Lens Support Bridge SKU: MTLSB MTF Lens Support Bridge fits any 15mm support bar systemFully adjustableHolds compatible lenses firmly to avoid lens rotation while adjusting zoom and focusStandard 1/4” stud to support lenses fitted with a support toeIncludes auxiliary 1/4” and 3/8” hellicoiled threads to the side
MTF M/43 & E Mount Support MTF M/43 & E Mount Support designed and built in the UK to compliment all MTF Micro 4/3 and E mount adaptors. Fits any 15mm support bar systemProtects camera lens mounts from damageHolds all adaptors firmly to avoid lens rotation while adjusting zoom and focusBridge section doubles as a support for long SLR lenses
OConnor O-Grips Double Jointed Set C1244-0002 The OConnor O-Grips Double Jointed Set is a set of modular O-Grips configured to create double handles for custom applications, and can be used for payloads up to 44 lb (20 kg). A titanium core based construction provides rigidity and stability for camera mounted operations. Wide compatibility is offered by the OConnor O-Grips bridge that supports the 15 mm and 19 mm Studio and 15 mm LWS standard rod systems. You can achieve complete spherical stepless articulation owing to the combination of 2 grips constituting the double jointed design. Addition of optional accessories as well as multiple-point connection on to camera systems is possible via the 3/8 stainless steel top screw and 3/8 bottom thread. You can quickly attach and remove the O-Grips system from the camera system using a commonly available 5 mm Allen wrench. Features Set of modular O-Grips configured to create double handles for custom applicationsSupports payloads up to 44 lb (20 kg)Provides rigidity and stability for camera mounted operation via a titanium core based constructionOffers wide compatibility via the O-Grips bridge that supports the 15 mm and 19 mm Studio and the 15 mm LWS standard rod systemsAllows you to achieve complete spherical stepless articulation owing to the combination of 2 grips constituting the double jointed designAllows addition of optional accessories as well as multiple-point connection on to camera systems via the 3/8 stainless steel top screw and 3/8 bottom threadEnables quick attachment and removal from the camera system using a commonly available 5 mm Allen wrench Package includes 4 x O-Grips Single Module C1244-10011 x O-Grips Three-System Rod Bridge C1244-1002
OConnor O-Grips Single Jointed Set C1244-0001 O-Grips Handgrip System includes 2 x O-Grips Single ModuleC1244-10011 x O-Grips Three-System Rod BridgeC1244-1002 The OConnor O-Grips can be used for all common camera systems (possibly via adapter). Single-handle ball joints with high load capacity (i.e. can also be used for large cameras)Each module is a fully adjustable and can be clamped in a full hemisphereStackable modules, i.e. you can put together Double or multi-joint handlesRod Bridge fits all three common rod systems (Studio 15mm, 19mm & Studio LWS 15mm) Constructed with a solid titanium core for extreme durability and reliability, O-Grips feature smooth-functioning, single-handle ball joints with a maximum payload capacity of 44 lbs (20 kg) at 7 in (18 cm) from ball center – making them ideal for work with both smaller and larger cameras. These are the first professional camera handgrips capable of fitting all three standard rod systems (15mm and 19mm Studio, and 15mm LWS) via the single, easy to use O-Grips bridge. OConnor O-Grips can be used with all common camera configurations (several optional accessories will be available). Modular O-Grips are stackable for custom applications and can be configured to create double or even multi-joint handles. Each grip is fully adjustable and is capable of a half sphere of stepless articulation. In addition, by combining two grips, the range can be extended to a complete sphere. Users can easily perform tool-free adjustment and locking of the O-Grips with one hand while operating most camera systems on their shoulder. A 3/8 stainless steel top screw and 3/8 bottom thread enable attachment at many points on a camera system and allow the addition of different accessories to the O-Grips for maximum versatility and functionality. Attaching or removing a single O-Grip Module from the camera system is quick and simple -- a 5mm Allen wrench is all it takes. Attachment 3/8” stainless steel top screw with 3/8” bottom thread. Quick and simple using a 5 mm Allen wrenchCompatible with all common camera configurations with optional accessories. Modular stackable design for custom applications Construction solid titanium corePayload capacity (maximum) 20 kgRod fitting (using O-Grips bridge)15 mm Studio19 mm Studio15 mm LWS