RigWheels Camera Ladder Mount We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder. The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed. 2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others. Flat Mounting Plates Only Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.

RigWheels Camera Ladder Mount We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder. The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed. 2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others. Flat Mounting Plates Only Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.

RigWheels Cloud Mount DSLR SKU: CM-DS The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on RigMount XL mounting platform, the RigWheels Cloud Mount DSLR adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the RigWheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. Cloud Mount DSLR - In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)8 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 1″ – Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key

RigWheels Cloud Mount PRO SKU: CM-P The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount PRO adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup8 x C-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x Sidecar Tray

RigWheels Cloud Mount SideCar SKU: CM-SC The RigWheels Cloud Mount SideCar is the upgraded assortment of parts for out Sidecar/Hostess Tray configuration. This includes all of the parts for the standard (hood/roof/trunk) configuration plus the additional components necessary for the sidecar / hostess tray / underslung configurations. In the box 3 x RigPlate6 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 2″ Thumb Knob4 x 5/16″ x 1″ Thumb Knob2 x 5/16″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup2 x 5/16″ bolt – 7/8″ Long1 x 3/16″ Hex Key1 x 5/32″ Hex Key2 x 5/16″ x 3/4″ Thumb Knob4x 5/16″ Female Thumb Knob

RigWheels Cloud Mount SideCar with Case SKU: CM-SC-C The RigWheels Cloud Mount SideCar is the upgraded assortment of parts for out Sidecar/Hostess Tray configuration. This includes all of the parts for the standard (hood/roof/trunk) configuration plus the additional components necessary for the sidecar / hostess tray / underslung configurations. In the box 3 x RigPlate6 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 2″ Thumb Knob4 x 5/16″ x 1″ Thumb Knob2 x 5/16″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup2 x 5/16″ bolt – 7/8″ Long1 x 3/16″ Hex Key1 x 5/32″ Hex Key2 x 5/16″ x 3/4″ Thumb Knob4 x 5/16″ Female Thumb Knob1 x Cloud Mount Travel Case

RigWheels Slingshot 10 SKU: SS-10 The Cloud Mount Slingshot builds on the incredible versatility of the Cloud Mount system by adding a configuration tailored for underslinging your camera/gimbal combination. The new elastic suspension components provide excellent vibration isolation performance for more demanding applications while maintaining the simplicity and practicality that RigWheels in known for. Just like the standard Cloud Mount configurations, the Rigwheels Slingshot is fully adjustable and scaleable for use with a small gimbal and camera all the way up to full cinema packages using a monster like the Movi XL. Simply change the length/diameter of the cables and/or elastic tubing to tailor the mount to the size of your camera setup and the terrain you’ll be operating on. Tubing and cables are both available in 3 different diameters. The elastic tubing is fastened to the system using our stainless steel tube connectors. These come with a variety of threading options so they can be placed in many different positions around our mounting plate as well as used with other rigging accessories. The standard positions for the tube mounts are where the Cloud Mount cables clamps are attached to the plate via 1/4-20″ screws. APPROXIMATE PAYLOAD: 0,00 - 4,54 KG

RigWheels Slingshot 20 SKU: SS-20 The RigWheels Slingshot produces great results but the speed and ease of use of the standard Cloud Mount is essential to have in your arsenal. In many locations you are not able to mount a system which hangs to the outside footprint of your vehicle. The hood/roof/trunk placements of the Cloud Mount are ideal for these scenarios. Like all RigWheels systems the components of the Cloud Mount and Slingshot can be used in many other ways further increasing their net value. When you’re not using the system as a vibration isolator you can use the components as hard mounts etc… If you really want to be efficient with the gear you travel with RigWheels in an excellent choice. In one small case you can carry components to configure our RailDolly, Cloud Mount, Slingshot, RigMount X, RigMount XL, RigSkate and more. APPROXIMATE PAYLOAD: 0,00 - 9,07 KG

RigWheels Cloud Mount Standard SKU: CM-FSThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available. Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle. This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key

RigWheels Cloud Mount Standard + CASE SKU: CM-ST-CThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x HARD CASE

RigWheels Vibration Isolation Unit SKU: CM-VI The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available. In the box 2 x RigPlate8 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)

RigWheels D-Cup 6″ Vacuum Suction Cup SKU: DC01 Industry standard 6″ vacuum suction cup with visual indicator for added safety. 3/8-16″ Stud

RigWheels E-Cup 10″ Suction Cup SKU: EC10Sometimes you just need really big suction cups to do heavy lifting. The E-Cup 10″ suction cup comes with a set of 3″ stand offs and a RigPlate mounting platform attached.

RigWheels GoPro 1/4-20″ Adapter SKU: GPA1 Adapter to mount your GoPro onto a 1/4-20″ screw

RigWheels Hood Hook SKU: HH01 Hood Hooks are a great tool for securing and mounting cameras and other gear to the exterior of cars. They are designed to hook to the edges of body panels and provide you with a solid/fixed connection to your car. The hook and d-ring components are of course rubber coated to protect your car.

RigWheels Jam Straps Car Mounting Anchor Point SKU: JS02 Rigwheels Jam Straps are one of the quickest and simplest ways to add anchor points to your vehicles body panels. Simply place the strap in-between where two body panels join and the soft rubber hose will create a sturdy anchor where you can connect straps and hooks for safety and stability when mounting cameras and other production equipment

RigWheels Kraken Camera Car Mount The Kraken Camera Car Mount sets a new standard in car rigging by combining mounting and positioning into one device. The innovative hinge design along with the ability to use standard tripod heads makes solid mounting intuitive and easy.Often for vehicle rigging, you pull parts from lots of different areas of your kit to have everything necessary. With the complete rental version of the Kraken Mount, you have camera suction mounteverything needed to securely mount any camera to a vehicle. This is a huge time saver when prepping for a shoot and a practical solution for rental houses / equipment rooms. Rigging 3 camera angles for a scene? Grab 3 Kraken mounts: done! Suction, positioning, stabilization, and safety all in one grab-and-go Pelican case.If you’re familiar with RigWheels, you know that we create new ways of doing things and original products (no knock-offs). This new system is the most complete, practical, common-sense solution you will find for an easily transportable car mounting system. Add up all the individual components and it’s also a great value. HighlightsInnovative Hinge design for easy setupAudible low-suction alarm on the 10″ primary suction cupUses standard tripod heads for positioning (75mm bowl included, 100mm, Mitchell and flat available)Included 75mm half-ball mount to directly mount your cameraCapacity up to 175lbCustom Pelican 16103″ and 6″ stand-offs to raise your camera4 points of stabilization (with the full kit)9.5″ and 18″ stabilization rods (5/8″ diameter) that connect via 3/8″ threadsStandard size grip-heads for ease of useIncluded safety/tethering componentsLow-mode configuration for hood-mountingShort tripod-head tie-down knobExtention plateNo tools requiredCore components made in the USA Kraken Base Unit1 x 10″ Vacuum Suction Cup with Low Suction Alarm4 x  3.25” Stand-Offs1 x RigPlate1 x RigPlate Pro2 x RigPlate Hinge1 x 75mm BowlConnecting HardwareKraken Complete Rental Kit Kraken Base75mm Bowl75mm BallAdditional Extension Plate3.25″ Stand-Offs/Baby-Pins (12 pieces)6″ Stand-Offs (4 pieces)9.5″ Stabilization Rods (8 pieces)19″ Stabilisation Rods (8 pieces)C-Cup 4.5” Suction Cups (4 pieces)Grip-Heads (8 pieces)Strap & Safety KitJam StrapsCustom Pelican 1610 with wheel

RigWheels Kraken Camera Car Mount The Kraken Camera Car Mount sets a new standard in car rigging by combining mounting and positioning into one device. The innovative hinge design along with the ability to use standard tripod heads makes solid mounting intuitive and easy.Often for vehicle rigging, you pull parts from lots of different areas of your kit to have everything necessary. With the complete rental version of the Kraken Mount, you have camera suction mounteverything needed to securely mount any camera to a vehicle. This is a huge time saver when prepping for a shoot and a practical solution for rental houses / equipment rooms. Rigging 3 camera angles for a scene? Grab 3 Kraken mounts: done! Suction, positioning, stabilization, and safety all in one grab-and-go Pelican case.If you’re familiar with RigWheels, you know that we create new ways of doing things and original products (no knock-offs). This new system is the most complete, practical, common-sense solution you will find for an easily transportable car mounting system. Add up all the individual components and it’s also a great value. HighlightsInnovative Hinge design for easy setupAudible low-suction alarm on the 10″ primary suction cupUses standard tripod heads for positioning (75mm bowl included, 100mm, Mitchell and flat available)Included 75mm half-ball mount to directly mount your cameraCapacity up to 175lbCustom Pelican 16103″ and 6″ stand-offs to raise your camera4 points of stabilization (with the full kit)9.5″ and 18″ stabilization rods (5/8″ diameter) that connect via 3/8″ threadsStandard size grip-heads for ease of useIncluded safety/tethering componentsLow-mode configuration for hood-mountingShort tripod-head tie-down knobExtention plateNo tools requiredCore components made in the USA Kraken Base Unit1 x 10″ Vacuum Suction Cup with Low Suction Alarm4 x  3.25” Stand-Offs1 x RigPlate1 x RigPlate Pro2 x RigPlate Hinge1 x 75mm BowlConnecting HardwareKraken Complete Rental Kit Kraken Base75mm Bowl75mm BallAdditional Extension Plate3.25″ Stand-Offs/Baby-Pins (12 pieces)6″ Stand-Offs (4 pieces)9.5″ Stabilization Rods (8 pieces)19″ Stabilisation Rods (8 pieces)C-Cup 4.5” Suction Cups (4 pieces)Grip-Heads (8 pieces)Strap & Safety KitJam StrapsCustom Pelican 1610 with wheel

RigWheels Longboard Wheel SKU: LW04 These RigWheels Longboard Wheel are the perfect custom formulation for film and video applications. Not too hard, not too soft. They include ABEC 7 bearings and the hard-to-find spacers that go inside the wheel. Can be mounted with 5/16″ or M8 size bolts.Set includes 4 x Wheels.

RigWheels MAG-Tight The MAG-Tight Camera Windshield Mount is the most practical way you’ll find to mount a DSLR sized camera or other production devices, like transmitters, monitors and antennas, to a vehicle. With the growing popularity of shooting content inside of cars and the unmistakable front-on two-shot that you see everywhere, The Righweels MAG-Tight windshield mount provides an ideal solution by overcoming many challenges that typically arise when using traditional suction or hard-mounting techniques. IT’S FAST!  There couldn’t be anything faster then snapping a couple magnets snapping together. Speed is critical for todays production environments and when you have fast tools you can get more content for your clients. IT’S RELIABLE. Forget about pumping your vacuum suction cups! This product was developed for a project where the cameras would be living in vehicles for up to a week at a time. If you’ve worked with suction mounts you know that they will loose power over time and more than that, it’s a thought that sits in your head the entire time you’re using suction which distracts you from the real work at hand. With our rubber coated magnets your camera will stay attached all day, all month, all year. This product is designed for HDSLR with compact glass or smaller (it can work for larger but that is at your discretion). IT’S SOLID With suction you’re using a material that is inherently flexible (rubber) to try to achieve a solid shot. This can introduce a lot of flex and vibrations. The MAG-Tight windshield mount essentially provide you with hard mounting points which yield much better results. IT’S SMALL One of the challenges with traditional rigging is the space necessary. In the interior space of a vehicle you need every millimeter you can get to tuck the cameras into the windshield deep enough to 1) stay out of the frame of other cameras 2) get as far away from the driver/passenger as possible to minimize distortion. The RigMount magnets are about 1/4″ thick and enable tricky placements quickly and easily. IT’S VERSATILE Like all RigWheels products, you can use these components individually for other purposes like mounting cameras and accessories to the exterior body panels of vehicles, railings, vending machines…. There are a lot of metal surfaces in the world!

Rigwheels Mag-Tight CurveSKU: MTCK The award winning Mag-Tight windshield mount has been an exceptional solution for quickly and easily mounting cameras and other accessories inside vehicles. RigWheels always strives to create new ways of doing things and ORIGINAL products. This March is the 10 year anniversary of RigWheels first product release (the original RigWheel or now, Microwheels) and we’re happy to announce another first of it’s kind product and improvement to the Mag-Tight concept, the Mag-Tight Curve. The standard Mag-Tight kit has proven it’s utility over the past few years in productions all around the world and on many of your favorite automotive themed shows however, one consideration when using the setup was the inability to use windshield wipers or the need to place the system on a portion of windshield where the wipers would not pass over. The new Mag-Tight Curve solves this problem with it’s domed surface which allow the wipers to pass over. Mag-Tight Curve kit includes2 x RigMount 100 Curve magnets2 x standard RigMount 100 magnets1 x mini grip-head with hot-shoe adapter for the top side of the camera1 x friction arm for the bottom side of the camera

RigWheels MicroWheel Stage-1 SKU: MWS1 MicroWheel Stage 1 Portable Camera Slider combines 4 MicroWheels  and 1 RigPlate with the appropriate mounting hardware for use together.RigWheels portable camera slider kits and parts are designed for easy expansion and and multifunction use. This camera slider carriage allows you to operate on smooth flat surfaces (such as a counter top or glass table) as well as on pipe as shown below. MicroWheel camera slider wheels will run on any smooth pipe with an outside diameter between 1″ & 2″.In addition to the variety of styles of movement you can achieve with this kit, you always have the ability to increase functionality by adding different parts. For example, you can add 2 RigAxels with inline wheels to configure RigSkate. Add a second RigPlate or a RigAxel with MircoWheels and you can configure a captive rail camera dolly.MicroWheels are mounted to the RigPlate with common 5/16″ OR 8mm bolts. As often as possible, common parts and hardware are used in Rigwheels products to give customers the ability to modify and come up with different configurations. This portable camera slider travels extremely well. With the MicroWheels removed, the flat 5/16″ thick RigPlate can fit in many common places like a laptop pocket. The 4 MicroWheels pack into their included travel bag are about the size of a portable hard drive. Pipe and tube for track can be found at most any hardware store. PVC pipe works well for applications when the pipe will be on the ground or a solid surface. Aluminum and steel pipe/tube are recommended for suspended camera dolly applications. In the box 1 x RigPlate 1 x RigAxle 4 x MicroWheel Camera Dolly Wheels4 x 5/16" Bolt (1.25" Long)8 x 5/16" Nut3/8" Bolt (0.75" Long)

RigWheels MicroWheel Stage-3 Camera Slider Carriage SKU: MWS3 The MicroWheel Stage 3 Carriage combines 8 MicroWheels and 2 RigPlates to make a captive rail camera slider. The dual carriage configuration makes your camera slider much more secure by locking it onto the rails. This setup also allows you to position the carriage/rails at any angle; just the trick for vertical or slanted moves.RigWheels camera slider kits and parts are designed for easy expansion and and multifunction use. This camera slider carriage allows you to operate on smooth flat surfaces (such as a counter top or glass table) as well as on pipe as shown below. MicroWheel camera dolly wheels will run on any smooth pipe with an outside diameter between 1″ & 2″.In addition to the variety of styles of movement you can achieve with this kit, you always have the ability to increase functionality by adding different parts. For example, you can add 2 RigAxels with inline wheels to configure RigSkate. 2 x RigPlate2 x MicroWheel Camera Dolly Wheels (4-Pack)1 x 3/8" Bolt 3/4" Long2 x 3/8" Bolt 6" Long2 x 3/8" Split Washer4 x 3/8" Wing Nut7 x 3/8" Washer8 x 5/16" Bolt 1-1/4" Long8 x 5/16" Short Wheel Spacer8 x 5/16" Washer8 x 5/16" Wing Nut

RigWheels Mitchell Adapter Plate With this adapter plate you can use Mitchell tripod heads on any of our systems that use either the RigPlate or RigPlate Pro. There are many different varieties of tie-down knobs for Mitchell heads so compatibility with RigPlate or RigPlate Pro will vary depending on the specific head and tie-down method. For example, if the head uses a “castle nut” you would need to use the Mitchell Adapter Plate in conjunction with the RigPlate Pro so the castle nut goes through the plate or, use a standard RigPlate with 3″ or 6″ risers.