Hawk-Woods BL-350 For the ultimate on-board runtime look no further than the BL-350 B-Lok battery manufactured by Hawk-Woods to support ARRI's new B-Mount lock in system. Equipped with the latest high draw Li-Ion battery cells and using Hawk-woods long standing solid case design these batteries will not let you down! The BL-350 outputs a straight 26 volts to suit all ARRI equipment new and old with the charged voltage peaking at 29.4v. All B-Lok batteries in the family provide 2x power outputs for powering further equipment around the camera rig, as standard these will be a multi-directional 12v D-Tap and a USB-C. The batteries will also provide direct communications with ARRI equipment allowing the user to select time remaining or percentage remaining. Technical data Mount Type: B-Mount Chemistry: Lithium-Ion () Weight: 1.61kg Size: 8.4 x 15.4 x 7.7 cm Nominal Voltage: 26v Wattage: 350Wh Capacity: 13.5Ah milliamp Hour: 13462mAh Number of D-Taps: 1 Number of USB-C: 1
Hawk-Woods BL-4X4 SKU: BL-4X4 The Hawk-Woods BL-4X4 is a 4-Channel simultaneous charger for B-Lok (B-Mount) batteries. This 2.5Ah charger will charge up to four of these high speed camera batteries within four hours. Technical data: Model: BL-4X4Type: B-LokWeight: 2.22kgSize: 22 x 18.5 x 15 cmCapacity: 2.5Ah
Hawk-Woods BL-98 Welcoming the smallest capacity B-Lok battery manufactured by Hawk-Woods to support ARRI B-Mount lock in system is the BL-98 battery. Equipped with the latest high draw Li-Ion battery cells and using Hawk-woods long standing solid case design these batteries will not let you down! The BL-98 outputs a straight 26 volts to suit all ARRI equipment new and old with the charged voltage peaking at 29.4v. All B-Lok batteries in the family provide 2x power outputs for powering further equipment around the camera rig, as standard these will be a multi-directional 12v D-Tap and a USB-C. The batteries will also provide direct communications with ARRI equipment allowing the user to select time remaining or percentage remaining. Technical data Mount Type: B-Mount Chemistry: Lithium-Ion () Weight: 770g Size: 8.4 x 15.4 x 5.3 cm Nominal Voltage: 26v Wattage: 98Wh Capacity: 3.8Ahmilliamp Hour: 3846mAh Number of D-Taps: 1 Number of USB-C: 1
Hawk-Woods BP-98UX The Hawk-Woods BP-98UX has been designed, manufactured and tested to be a direct replacement for Sony BP-U type batteries. With a built-in fuel gauge & Hawk-Woods build quality, the high-tech Li-Ion BP-98UX camera battery offers stunning performance for its size and weight and unlike many replacement BP-U batteries on the market, the BP-98UX uses the original battery contacts to provide power, rather than a flying lead connected to the devices DC power input. The built-in Total Battery Protection system offers over discharge / voltage protection (If placed on unsuitable / incorrect charger), short circuit protection and thermal protection. Dual Power-con (D-Tap) power outputs regulated from 11-17v was also added. Weight: 440gSize: 9.2 cm x 3.9 cm x 7 cm Current: 6.8Ah
Hawk-Woods DV-K1 Hawk-Woods DV-K1 is a complete power kit for Blackmagic 4k pocket camera. The DV-BM4 product will attach to a camera cage, and provide power via the camera's DC input. We have installed a 12v regulator in order to step up the voltage from the NPF (L-series) battery. The DV-C1 charger is an overnight charger, which charges at 0.8A. DV-F990 will run the camera for around 2.5 - 3 hours run time, subject to conditions. This battery is a total of 74Wh. This kit consists of the following: 1 x DV-F990 Sony NPF (L-Series) 7.2v 74W 10200mAh replacement battery1 x DV-C1 1-Channel Sony NP-F Overnight Charger1 x DV-BM4 Blackmagic Pocket 4k power adaptor
Hawk-Woods GR-100 SKU: GR-100 The Gripper 100 is a lightweight 100 watt battery that attaches directly to 15mm rods. Instead of needing additional mounting accessories, the body of the gripper battery clamps firmly to your 15mm lightweight spaced rods. This 14.4v battery comes with two p-tap outputs - one on the front and one on the back. You can increase the number of P-taps with the Gripper P-tap adapter. An LED fuel gauge on the side shows the remaining capacity of the battery. Each battery has been UN tested for airline safety and are suitable for transportation on passenger aircraft as carry-on luggage. This is the perfect accessory to the Gratical Eye and the Power & Video Cable. The Gripper 100 powers the Gratical Eye for 14 hours.
Hawk-Woods Gripper 75W battery GR-75 SKU: GR-75 The Gripper 75 is a lightweight 75 watt battery that attaches directly to 15mm rods. Instead of needing additional mounting accessories, the body of the gripper battery clamps firmly to your 15mm lightweight spaced rods. This 14.4v Hawk-Woods Gripper 75W comes with two p-tap outputs - one on the front and one on the back. You can increase the number of P-taps with the Gripper P-tap adapter. An LED fuel gauge on the side shows the remaining capacity of the battery. Each battery has been UN tested for airline safety and are suitable for transportation on passenger aircraft as carry-on luggage. This is the perfect accessory to the Gratical Eye and the Power & Video Cable. The Gripper 75 powers the Gratical Eye for 14 hours.
Hawk-Woods Gripper Fast Charger SKU: GR-1C The Gripper Single Battery Charger plugs directly into the P-tap of either the Gripper 75Gripper 100 for fast charging. Small and portable, this 2A charger charges either the Gripper 75 or the Gripper 100 within 3-4 hours. Gripper Fast Charger Technical data Input 100-240V ~1A 50/60HzOutput 16.8-2A
Hawk-Woods LR-08 SKU: LR-08 Hawk-Woods LR-08 is a dummy battery for the SMALLHD Monitors 502/503/702/703 and Atomos Monitors, such as Inferno, Flame, Shogun, V. The LR-08 is regulated to 8.4v, and can be placed onto the back of your monitor for use with external power. Weight: 4gInput: Power-con 2pin Male Output: Dummy Battery 8.4v Reg
Hawk-Woods LR-14 Hawk-Woods LR-14 cable is designed for use with the Panasonic Lumix S1. This is a regulated dummy battery to 8.4v for the camera's. This cable runs from a Power-con so you can power from a external battery in order to run the camera for longer run-times. This is suited for the following LUMIX S1 camera's: S1 / S1H / S1R / S1-24-105mm Input: Power-con 2pin Male Output: Panasonic S1
Hawk-Woods MXB-880 The next step in mini power has arrived in the shape of a mini X-Boxx floor battery. Hawk-Woods X-Boxx brand has a long established history for delivering power for demanding equipment such as professional film cameras or lighting applications. The X-boxx range has stood up over the years, proving to be robust and long serving to it's users! The X-Boxx mini gives you all the advantages of a conventional battery box but now is more compact plus lighter then it's predecessors and competition. Monitor your power usage with the new graphic display, featuring run time remaining, battery voltage plus accurate charging status. The lightweight box provides a huge 880Wh of power capacity along with four outputs featuring 2x XLR4 14v nominal and 2x XLR3 28v regulated chassis mounted connectors. This battery has a built in charger making this a complete unit for most power applications on set. If preferred you can still charge via one of the XLR4 connectors with one of our X-Boxx chargers. The MXB-880 offers up a solid carry handle plus an optional carry strap will be supplied. The box also boasts large rubber end caps to protect the battery and enhance the image of this smart, sleek looking battery! Hawk-Woods MXB-880 is more than capable of powering your full setup! Technical data Weight: 7.2kgSize: 21.6 x 21.6 x 13.6 cmNominal Voltage: 14.4vWattage: 880WhCurrent: 16A
Hawk-Woods PC-10 Hawk-Woods PC-10 is a Power-Con 2-pin (male) - DC Jack 2.5mm. Suitable for use with Blackmagic Cinema camera and the Blackmagic 4k camera. 40cm LengthPower-con (D-Tap)DC Jack 2.5mm Centre positiveBlackmagic cinema/4k compatible
Hawk-Woods PC-16 D-Tap to 8-pin Lemo Hawk-Woods PC-16 power cable has been launched for the new Alexa Mini. Power-Con - 20cm - Lemo 8P 2B (Female) Weight: 55gInput: Power-con 2pin MaleOutput: Lemo 2B 8pin Female
Hawk-Woods PC-16R The Hawk-Woods PC-16R power cable is used to run the Alexa Mini / Alexa Amira from a single Power-con (D-Tap) output. This cable is wired with a right angle Lemo for users who prefer/require a more space saving cable exit. Due to a number of requests the power cable has been manufactured using a high quality dual flex cable ideal for Movi/drone use. Weight: 65gInput: Power-con 2pin MaleOutput: Lemo 2B 8pin Female Right Angled
Hawk-Woods PC-20 Power-Con Male to Power-Con Male Cable, length: 45 cm
Hawk-Woods PC-21R Hawk-Woods PC-21R is a RED camera power cable. This can be used in order to power RED cameras, such as the DRAGON, EPIC, SCARLET and the RED ONE from a Power-con (D-Tap) power output. The PC-21R offers you the right angled lemo connector for those tailored setups! Can be made to a length to suit.
Hawk-Woods PC-8 Power-Con - 2 x Power-Con (Female) Weight 29 gCable Input Power-ConCable Output Power-Con x2 FCable Length 6 cm
Hawk-Woods Fischer RS 3-pin (male) - 3x Fischer RS 3-pin (female) The Hawk-Woods RP-A2 has been designed to provide further outputs from a single RS Fischer output like the Arri Alexa 24v output. This adaptor has 3x RS Fischer outputs allowing the user to run extra accessories/equipment. Weight: 71gInput: Fischer 102 3pin MaleOutput: Fischer 102 3pin Female Chassis Mount
Hawk-Woods RP-M180 The Hawk-Woods 180Wh mini Reel Power battery has been added to the mini RP range. Hawk-Woods range of mini 26v batteries have been designed for running high voltage cameras such as ARRI camera's and lighting equipment, with only a third of the weight of a standard size RP battery, this is the perfect solution if you want long run times, however would like to save on weight and space. The battery is that small, it will fit into the palm of your hand. Hawk-Woods mini Reel power range uses low resistance cell technology allowing high discharge and improved cycle life. The perfect match for high-voltage camera's when using the higher voltage battery, you demand less current from the battery, giving them an easier life and longer life span. When used with the RPM-HS1A these batteries can be used in a hot swap solution from a floor battery for longer run times. These batteries are not flight safe as they are outside of the 100Wh-160Wh bracket With built-in fuel gauge & Hawk-Woods build quality. The built-in Total Battery Protection system offers over discharge / voltage protection (If placed on unsuitable / incorrect charger), short circuit protection and thermal protection. Type: Reel-PowerWeight: 710g Size: 7 cm x 10.3 cm x 6.3 cm Current: 8.0Ah
Hawk-Woods RP-M90 The Hawk-Woods 90Wh mini Reel Power battery has been added to the mini RP range. Hawk-Woods range of mini 26v batteries have been designed for running high voltage cameras such as ARRI camera's and lighting equipment, with only a third of the weight of a standard size RP battery, this is the perfect solution if you want long run times, however would like to save on weight and space. The battery is that small, it will fit into the palm of your hand. Hawk-Woods mini Reel power range uses low resistance cell technology allowing high discharge and improved cycle life. The perfect match for high-voltage camera's when using the higher voltage battery, you demand less current from the battery, giving them an easier life and longer life span. When used with the RPM-HS1A these batteries can be used in a hot swap solution from a floor battery for longer run times. Being below 100Wh range, these batteries are flight safe for carry-on luggage and a maximum of two can be carried by each passenger. With built-in fuel gauge & Hawk-Woods build quality. The built-in Total Battery Protection system offers over discharge / voltage protection (If placed on unsuitable / incorrect charger), short circuit protection and thermal protection. Type: Reel-Power Weight: 500g Size: 7.1 cm x 9.9 cm x 6.6 cm Current: 6.0Ah
Hawk-Woods RP-MX4 Hawk-Woods's latest 4-channel Reel Power simultaneous charger offers a more sleek and compact look than our previous simultaneous model. Still keeping the simultaneous function so that you may charge all four batteries at once for ultimate charging times! This charger is fitted with 2A boards and is suited for our mini-RP battery range as well as our high performance and classic Reel Power batteries. LED's fitted for battery status, also fitted with soft leather carry handle. Weight: 1.86kg Size: 12 x 14 x 22 cm Current: 2.0Ah
Hawk-Woods VL-M98 Hawk-Woods 98Wh mini V-lok battery is the first to be added to the mini VL range. The mini battery system offers all the features of the standard size V-Lok battery in what is to date the smallest V-Lok case. The perfect solution if you want long run times, but want to save on weight and space! The battery is that small, it will fit into the palm of your hand. When used in conjunction with VL-MCF1, these batteries can be treated similar to a stack system, however without carrying dead weight, Mini VL can be switched and rotated for continuous power, whilst combining the wattage of 2 batteries. These batteries will work on all existing fittings and chargers. Within the 100Wh bracket, this battery is flight safe for carry-on luggage, volumes are subject to the airline! Lastly the battery has the benefit of 1x Power-Con output which will provide nominal battery voltage. Mount Type: V-MountChemistry: Lithium-Ion ()Weight: 500gSize: 7 x 10.3 x 4.5 cmNominal Voltage: 14.4vMax Voltage: 16.8vEnd Voltage: 11vWattage: 98WhCurrent: 6.8Ahmilliamp Hour: 6806mAhStorage Temperature: < 35°cCharge Temperature: 0°c to 45°cDischarge Temperature: -30°c to 55°c
Hawk-Woods VL-MX8 Hawk-Woods VL-MX8 latest 8-channel V-Lok semi-sequential charger simultaneously charges four batteries at any one time, which then moves onto the other four channels. Given the chargers capability of charging 8x batteries the MX8 is still relatively small and compact compared to other chargers on the market which are of a similar size and only four channels. A fantastic option for charging your kit of batteries from a single solution. Channels one to four will charge firstly, these fittings are labelled at the front and side of charger. Channels five to eight will then charge once the charge has completed on the previous set. LED's fitted for battery status, also fitted with soft leather carry handle.Charging current - 2.3AWeight: 2.08kgSize: 12.5 x 15 x 21 cm
Hawk-Woods VL-P90 The follow on to the original VL-P60 has been added to Hawk-Woods collection of on-board mains power supplies to deal with the ever-demanding high powered cameras now being released. The VL-P90 has 90 watts available and is capable of powering cameras like Arri's Alexa Mini / Arri's Amira and Sony's F5/55 cameras comfortably. The unit has mains input and offers and additional XLR output for powering a further accessory. Weight: 247g Size: 9 cm x 15.5 cm x 6.5 cm