Wooden Camera D-Tap to RED DSMC1, DSMC2 (Braided Flex Cable) Wooden Camera Braided Flex Cable is a special flexible version of the D-Tap to RED DSMC1, DSMC2 that allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug. Great for gimbal use! Cable length: 91cmWeight: 272.16 gDimensions: 25.4 x 127 x 152.4 mm
D-Tap to RED KOMODO SKU: 281100 D-Tap to RED KOMODO is a D-tap to RED KOMODO cable that allows you to power the camera using any V-Mount or Gold Mount battery with a D-Tap plug.Cable length: 91 cmWeight: 74 gDimensions: 304.8 x 38.6 x 12.3 mm
Wooden Camera D-Tap to Sony A7s SKU: 194700 D-Tap to Sony A7s connector allows you to power the Sony A7, Sony A7r, or Sony A7s camera using any V-Mount or Gold Mount battery with a D-Tap plug. Voltage converter box mid cable adapts 14.8v to standard 7.4v required by camera. Length 380 mmWeight 23 gDimensions 457 mm x 25.8 mm x 11.6 mm
Wooden Camera D-Tap to Sony A9, A7rIII (Dummy NP-FZ100) SKU: 262300 Wooden Camera D-Tap to Sony A9, A7rIII connector powers the Sony A9 or A7rIII camera using any V-Mount or Gold Mount battery with a D-Tap plug. Voltage converter box mid cable adapts 14.4v to standard 7.4v required by camera. Reverse polarity protection is built in so if the cable is plugged in backwards to a D-Tap, it will not be damaged. Weight: 59gDimensions: 457 mm x 25.8 mm x 38.1 mmCable length: 380mm
Wooden Camera D-Tap to Sony FX9, FX6 SKU: 276100 Wooden Camera D-Tap to Sony FX9, FX6 allows you to power the Sony FX9 camera using any V-Mount or Gold Mount battery with a D-Tap plug. The cable regulates power from the D-Tap to the proper 19.5V required by the camera. Specifications: Weight: 90,72 gDimensions: 571,5 mm x 34,8 mm x 19 mmCable length: 508mm
Wooden Camera Gold Mount Plus D-Box System for Sony VENICESKU: A00607Designed to seamlessly integrate and maximize power efficiency on the Sony VENICE and Sony VENICE 2, the Gold Mount Plus D-Box expands power options for both the camera and accessories. Running 26v as an input source allows the camera’s native accessory outputs to expand to 2A. This system includes a 3.5-inch 5-pin D-Link cable and a Power Strip, providing enhanced connectivity and streamlined power management.D-Box Power Strip features contoured connectors that match the camera’s profile and connector angles, ensuring all cables can be installed without collisions. This Power Strip communicates with the camera, allowing for the use of any ARRI standard start/stop trigger. It attaches to the top right side of the camera via a 3-pin connector and includes a Tape Hook threaded hole, offering a secure and reliable connection.The Gold Mount Plus D-Box offers onboard hot-swap capability with DC-In power ensuring seamless transitions between power sources.This D-Box includes 2x D-Tap connectors at 15V regulated, with a maximum 5.8A current rating shared between connectors, providing additional power flexibility for external accessories. With high-efficiency power distribution and flexible expansion options, the Gold Mount Plus D-Box™ is an essential upgrade for Sony VENICE users looking for enhanced power management and accessory support. Weight: 485.3 g Dimensions: 163 x 40.5 x 144 mmMultiple power outputs for accessories2x 3-pin connectors unregulated 26V with Run Stop2x 2-pin at 15V regulatedConnectors4-Pin XLR Cable powers the camera body8-Pin 2B connector for DC-In = 2x D-Tap ports2x 3pin connector at 26V unregulated with Run Stop2x 2pin at 15V regulatedIncluded ItemsGold Mount Plus D-Box for Sony VENICED-Box Link Cable (5-Pin RA to 5-Pin Straight, 3.5in)D-Box Sony VENICE, VENICE 2 Replacement Power Strip
Wooden Camera Micro Battery Plate Adapter V-Mount to GOLD-Mount (RED V-Raptor, KOMODO-X) SKU: A00028Micro Battery Plate Adapter V-Mount to Gold Mount (RED V-Raptor), designed specifically for the RED V-RAPTOR and RED KOMODO-X, converts a V-Mount system to accept a Gold Mount battery. It is made from anodized aluminum which ensures both durability and secure battery mounting. A thicker construction is utilized to allow for full-sized cinema batteries to clear the connectors on the V-RAPTOR or KOMODO X camera.clear the connectors on the V-RAPTOR or KOMODO X camera. This power plate features 2x D-Taps for accessory power at battery voltage (11-17V) - supported by a resettable 3.8A digital E-Fuse. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. It is compatible with both micro and full-sized cinema batteries. SpecificationsWeight: 242gDimensions: 75 x 30 x 108 mm
Wooden Camera Micro Battery Plate Adapter V-Mount to V-Mount (RED V-Raptor, KOMODO-X) SKU: A00029Micro Battery Plate Adapter V-Mount to V-Mount (RED V-Raptor) allows users to attach full-sized V-Mount batteries to their RED V-RAPTOR and RED KOMODO-X systems. It is made from anodized aluminum which ensures both durability and secure battery mounting.This power plate features 2x D-Taps for accessory power at battery voltage (11-17V) - supported by a resettable 3.8A digital E-Fuse. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. It is compatible with both micro and full-sized cinema batteries.SpecificationsWeight: 271gDimensions: 75 x 39 x 108 mm
Wooden Camera Micro Battery Plate Battery Slide Wooden Camera Micro Battery Plate Battery Slide is a Gold or V-Mount Universal Micro Battery Plate slide with two D-taps, a dual rod clamp, and a resettable 9-amp fuse. A00347 | Accessory System for Sony FX3/FX30 (V-Mount)Weight: 282.9 g Dimensions: 50 mm x 130 mm x 102 mm A00346 | Accessory System for Sony FX3/FX30 (Gold Mount)Weight: 261.6 g Dimensions: 50 mm x 130 mm x 108 mm
Wooden Camera Micro Battery Plate Battery Slide Wooden Camera Micro Battery Plate Battery Slide is a Gold or V-Mount Universal Micro Battery Plate slide with two D-taps, a dual rod clamp, and a resettable 9-amp fuse. A00347 | Accessory System for Sony FX3/FX30 (V-Mount)Weight: 282.9 g Dimensions: 50 mm x 130 mm x 102 mm A00346 | Accessory System for Sony FX3/FX30 (Gold Mount)Weight: 261.6 g Dimensions: 50 mm x 130 mm x 108 mm
Wooden Camera Micro Battery Slide Pro Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro, V-Mount) utilizes an Anton/Bauer micro battery plate which provides unregulated 14v to a 2-Pin connector for camera power. The 2-Pin connector is compatible with both Blackmagic Pocket Cinema Camera 6K Pro and Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 cameras.The plate attaches via two 15mm rods and position can be adjusted along the battery slide. The user retains the ability to hot swap between the onboard Sony NPF-Series and external cinema battery. The Micro Battery Slide Pro is compatible with both micro and full-sized cinema batteries. It also features 2x D-Tap (5.8 Amps) port for accessory power as well as a digital fuse which cuts off accessory outputs, should the user exceed the set current for accessories, while leaving the camera powered.Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. Weight: 315 gDimensions: 145 x 115 x 40 mm
Wooden Camera Power Extension BMPCC4K SKU: 264200 Power Extension BMPCC4K is a power cable that extends any Blackmagic Pocket Cinema Camera 4K battery plate or AC adapter by 36 inches (0.91 meters). Specifications: Weight: 63g Dimensions: 973 mm x 9.7 mm x 9.7 mm
Wooden Camera Power Strip for FUJIFILM GFX ETERNA 55SKU: A00934The Power Strip offers users a streamlined solution for incorporating power distribution directly into their camera rigs, eliminating the need for an external power source. Equipped with both 2-Pin 14V and 3-Pin 14V power outlets, the Power Strip provides power to various camera accessories while offering integrated Run/Stop functionality when teamed up with our D-Box.The Power Strip features a 5-Pin connector at its rear that enables pass-through power and trigger ability from the D-Box™. This ensures uninterrupted power flow while avoiding potential interference with the camera's top handle.The Power Strip can be attached to the top of the camera using two ⅜”-16 screws and includes multiple mounting points on its top surface, as well as openings on the side that allow for attaching to the Front and Rear Top Plates. This expands mounting options across the top of the camera, enabling users to integrate other accessories into their setup.SpecificationsWeight: 137.9 gDimensions: 153.6 x 46.5 x 17.2 mm
Universal Micro Battery Plate Universal Micro Battery Plate is made from anodized aluminum which ensures both durability and secure battery mounting. A symmetrical M3 60mm x 60mm square bolt pattern is utilized for easy universal mounting. This power plate features 2x D-Taps for accessory power at battery voltage (11-17V) - supported by a resettable 9A digital E-Fuse - rear cover plate, and captive mounting screws. Should the user exceed the set current for accessories, accessory outputs are disabled. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. It is compatible with both micro and full-sized cinema batteries. Weight: 146gDimensions: 75 x 25.6 x 108 mm
Universal Micro Battery Plate Universal Micro Battery Plate is made from anodized aluminum which ensures both durability and secure battery mounting. A symmetrical M3 60mm x 60mm square bolt pattern is utilized for easy universal mounting. This power plate features 2x D-Taps for accessory power at battery voltage (11-17V) - supported by a resettable 9A digital E-Fuse - rear cover plate, and captive mounting screws. Should the user exceed the set current for accessories, accessory outputs are disabled. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. It is compatible with both micro and full-sized cinema batteries. Weight: 146gDimensions: 75 x 25.6 x 108 mm
Wooden Camera WC Pro V-Mount (3x D-Tap) SKU: 257800 Wooden Camera brand Pro V-Mount plate is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. Great for use with Director's Monitor Cage or for an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). Weight: 234g Dimensions: 142.4 mm x 90.8 mm x 21.3 mm
Wooden Camera WC Pro V-Mount BMPCC4K SKU: 265500 WC Pro V-Mount (Blackmagic Pocket Cinema Camera 4K, BMPCC4K) is a metal power plate, created in partnership with Anton Bauer, and has a rugged aluminum body for durability and secure battery mounting and a DC connector compatible with the Blackmagic Pocket Cinema Camera 4K. Features 3x D-Taps for accessory power at battery voltage (12-16V), a digital fuse with reset button, rear cover plate, and captive mounting screws. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). Weight: 187gDimensions: 142.6 mm x 92.1 mm x 21.9 mmCable length: 406.4mm
Wooden Camera WC V-Mount (Dual D-Tap) SKU: 191300 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount. Plate provides unregulated 12V power (12-16V depending on battery connected) through 2x D-Taps on plate. Great for use with Director's Monitor Cage or combine with Battery Slide (sold separately) for adjustable battery system. Weight 234 gDimensions 142.4 mm x 90.8 mm x 21.3 mm
Wooden Camera WC V-Mount (Epic/Scarlet) SKU: 167000 Wooden Camera WC V-Mount plate utilizing an IDX V-Mount and RED Epic/Scarlet LEMO connector. This plate is wired correctly to display RED Brick and smart V-mount battery percentage on displays. 8" cable exits the right side of the plate allowing easy insertion into the camera. Design allows minimal cable excess while still being able to reach additional modules when necessary. 2x D-Tap ports for accessory power To mount the WC V-Mount onto the back of the Epic/Scarlet one of these items is required Quick Back v2 - a quick release plate that can attach to the back of the brain or any RED moduleFixed Back - a bolt on battery mount that can only attach to the brain
Wooden Camera WC V-Mount (XLR 4 Pin) SKU: 179200 Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and standard 4 pin XLR power connector. Plate provides unregulated 12V power (12-16V depending on battery connected). Great for cameras like Blackmagic Studio Camera (BMSC), Panasonic GH4-YAGH, Sony F55/F5, AJA CION, and more. 2x D-Taps on plate provide 12-16V depending on battery connected Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). Weight 234 gDimensions 142.4 mm x 90.8 mm x 21.3 mmCable length 40 cm
Zacuto 2 Pin Lemo Power & Video Cable SKU: Z-EPVC-PS Zacuto has created a custom power and video cable with a power switch. It combines a BNC with a 2 pin Lemo to Power Tap (P-tap). The cable allows you to power the Gratical Eye and send the SDI signal from your camera with the BNC connector using one single cable. There is a power switch located on the p-tap to easily power on or off your Gratical Eye. The power is sent from a P-Tap via a 2 pin Lemo connection to the Gratical Eye. At 30“ long, it’s just the right length to accommodate most cameras and rigs on the market. A molded sheathing keeps cables neat, while the ends are free to be configured for your setup.
Zacuto 4 Pin Lemo Power & Video Cable SKU: Z-4PVC Zacuto Z-4PVC is a custom power video cable with power switch combining a BNC with a 4 pin Lemo Compatible to powertap. This handy cable allows you to power the Kameleon and send the SDI signal from your camera with the BNC connector. A molded sheathing keeps cables neat, while the ends are free to be configured for your setup. This cable is covered under our one-year electronics warranty. The cable is 30" long.
Zacuto LP-E6 to D-Tap Cable PT-ZAC-E6 The LP-E6 to D-Tap Power Cable allows you to power anything using a Canon LP-E6 battery with an external power source. Now you can power the line of Zacuto EVFs or your Canon 5D/7D with pro V-Mount or Anton Bauer batteries. Input Voltage; 10-24vOutput Voltage; 8VOutput current; 2ACoiled length 18", extension 48"Emulator chip to convey battery status based on input voltage