Schneider 4x5.65" Radiant Soft The Radiant Soft filters have the effect of toning down skin imperfections while having a limited effect on contrast or highlights. Planar particle selection is the key to avoiding the undesired result of a diffusion filter that assaults contrast and over-blooms highlights. An array of small, two-dimensional particles distributed within the surface of this filter smooths fine lines and textures. Reduces the “digital edge” by softening the sharp edges of super sharp images. For capturing the subject's skin in a flattering result without any sacrifice to the overall image. Keep control over contrast and highlights without causing a blooming effect. Feautures Tones down skin imperfections without changing the surroundingsGives skin a soft glowLow blooming effect on highlightsLimited effect on contrast

Schneider 4x5.65" Radiant Soft The Radiant Soft filters have the effect of toning down skin imperfections while having a limited effect on contrast or highlights. Planar particle selection is the key to avoiding the undesired result of a diffusion filter that assaults contrast and over-blooms highlights. An array of small, two-dimensional particles distributed within the surface of this filter smooths fine lines and textures. Reduces the “digital edge” by softening the sharp edges of super sharp images. For capturing the subject's skin in a flattering result without any sacrifice to the overall image. Keep control over contrast and highlights without causing a blooming effect. Feautures Tones down skin imperfections without changing the surroundingsGives skin a soft glowLow blooming effect on highlightsLimited effect on contrast

Schneider 4x5.65" Radiant Soft The Radiant Soft filters have the effect of toning down skin imperfections while having a limited effect on contrast or highlights. Planar particle selection is the key to avoiding the undesired result of a diffusion filter that assaults contrast and over-blooms highlights. An array of small, two-dimensional particles distributed within the surface of this filter smooths fine lines and textures. Reduces the “digital edge” by softening the sharp edges of super sharp images. For capturing the subject's skin in a flattering result without any sacrifice to the overall image. Keep control over contrast and highlights without causing a blooming effect. Feautures Tones down skin imperfections without changing the surroundingsGives skin a soft glowLow blooming effect on highlightsLimited effect on contrast

Schneider 4x5.65" Radiant Soft The Radiant Soft filters have the effect of toning down skin imperfections while having a limited effect on contrast or highlights. Planar particle selection is the key to avoiding the undesired result of a diffusion filter that assaults contrast and over-blooms highlights. An array of small, two-dimensional particles distributed within the surface of this filter smooths fine lines and textures. Reduces the “digital edge” by softening the sharp edges of super sharp images. For capturing the subject's skin in a flattering result without any sacrifice to the overall image. Keep control over contrast and highlights without causing a blooming effect. Feautures Tones down skin imperfections without changing the surroundingsGives skin a soft glowLow blooming effect on highlightsLimited effect on contrast

Schneider 4x5.65" Radiant Soft The Radiant Soft filters have the effect of toning down skin imperfections while having a limited effect on contrast or highlights. Planar particle selection is the key to avoiding the undesired result of a diffusion filter that assaults contrast and over-blooms highlights. An array of small, two-dimensional particles distributed within the surface of this filter smooths fine lines and textures. Reduces the “digital edge” by softening the sharp edges of super sharp images. For capturing the subject's skin in a flattering result without any sacrifice to the overall image. Keep control over contrast and highlights without causing a blooming effect. Feautures Tones down skin imperfections without changing the surroundingsGives skin a soft glowLow blooming effect on highlightsLimited effect on contrast

Schneider 6.6x6.6" Hollywood Black Magic Hollywood Black Magic softens details and creates a subtle airbrushed image. It is the perfect choice to reduce the digital look of today‘s high-res image sensors. Diffusion filter, reduce blemishes and winkles. Pleasant softening of bright highlights helps control exposure. Combination of HD Classic Soft and Black Frost 1/8 filter. Providing a constant smooth transition in the highlights, even at higher diffusion strength. Smoothen the harsh edges of high resolution pictures as 4k or 8k. Features Remove unsightly blemishes and wrinklesDiminish the harsh video edge while maintaining rich blacks and colorsCombination of HD Classic Soft and Black Frost filter

Schneider 6.6x6.6" Hollywood Black Magic Hollywood Black Magic softens details and creates a subtle airbrushed image. It is the perfect choice to reduce the digital look of today‘s high-res image sensors. Diffusion filter, reduce blemishes and winkles. Pleasant softening of bright highlights helps control exposure. Combination of HD Classic Soft and Black Frost 1/8 filter. Providing a constant smooth transition in the highlights, even at higher diffusion strength. Smoothen the harsh edges of high resolution pictures as 4k or 8k. Features Remove unsightly blemishes and wrinklesDiminish the harsh video edge while maintaining rich blacks and colorsCombination of HD Classic Soft and Black Frost filter

Schneider 6.6x6.6" Hollywood Black Magic Hollywood Black Magic softens details and creates a subtle airbrushed image. It is the perfect choice to reduce the digital look of today‘s high-res image sensors. Diffusion filter, reduce blemishes and winkles. Pleasant softening of bright highlights helps control exposure. Combination of HD Classic Soft and Black Frost 1/8 filter. Providing a constant smooth transition in the highlights, even at higher diffusion strength. Smoothen the harsh edges of high resolution pictures as 4k or 8k. Features Remove unsightly blemishes and wrinklesDiminish the harsh video edge while maintaining rich blacks and colorsCombination of HD Classic Soft and Black Frost filter

Schneider 6.6x6.6" Hollywood Black Magic Hollywood Black Magic softens details and creates a subtle airbrushed image. It is the perfect choice to reduce the digital look of today‘s high-res image sensors. Diffusion filter, reduce blemishes and winkles. Pleasant softening of bright highlights helps control exposure. Combination of HD Classic Soft and Black Frost 1/8 filter. Providing a constant smooth transition in the highlights, even at higher diffusion strength. Smoothen the harsh edges of high resolution pictures as 4k or 8k. Features Remove unsightly blemishes and wrinklesDiminish the harsh video edge while maintaining rich blacks and colorsCombination of HD Classic Soft and Black Frost filter

Schneider 6.6x6.6" Hollywood Black Magic Hollywood Black Magic softens details and creates a subtle airbrushed image. It is the perfect choice to reduce the digital look of today‘s high-res image sensors. Diffusion filter, reduce blemishes and winkles. Pleasant softening of bright highlights helps control exposure. Combination of HD Classic Soft and Black Frost 1/8 filter. Providing a constant smooth transition in the highlights, even at higher diffusion strength. Smoothen the harsh edges of high resolution pictures as 4k or 8k. Features Remove unsightly blemishes and wrinklesDiminish the harsh video edge while maintaining rich blacks and colorsCombination of HD Classic Soft and Black Frost filter

SHAPE 100W D-TAP TO USB-C BI-DIRECTIONAL CHARGING ADAPTER SKU: DTUC This 100W D-TAP to USB-C adapter is engineered to work seamlessly with USB-C to USB-C charging cables, making it the ideal partner for SHAPE 450W Fast Charger. It’s your go-to solution for charging batteries with D-Tap ports, including popular Gold Mount, V-Mount, and BP-U batteries. Say goodbye to the hassle of carrying multiple chargers for different battery types. 100W D-tap to USB-C Bi-Directional Charging AdapterIs used in combination with USB-C to USB-C charging cables with SHAPE’s 450W Fast Charger to charge batteries with D-Tap ports (Gold Mount/V-Mount/BP-U)Uses PD charging protocol Type C10-16.8 V, 10 A output on D-TapType C Output / Input: 3.3-20V, 5ALED light to confirm charge. Technical dataMaterial: Aluminum-AlloyColor: BlackStand-by Power Consumption: 180uALED Status: Blue Light - NormalTurn Off – Disconnect or Protocol not SupportedD-Tap Output/Input: 10-16.8V, 10A. (+,- Pins Identified)Type-C Output/Input: 3.3V-20V, 5A (Intelligent Recognition on Charging Protocols, Auto-adaptation on Output Voltage & Current)Dimensions: 260mm(L) x 36mm(W) x 17mm(H)Weight: 49g

SHAPE Follow Focus ProSKU: FFPRO The SHAPE Follow Focus Pro is an industry workhorse and has already proven itself on countless tough shoots all over the world, so you needn’t worry about it letting you down. SHAPE engineering is internationally renowned and there is one of the most robust motion picture accessories ever built. It mounts on 15 mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15 mm rods, allowing for quick attachment, removal, and repositioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth – depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks. While the Follow Focus Pro contains the essentials for pulling focus on any type of project production, the choice of either 15 mm rod adaptors means that you can SHAPE the system to meet your particular requirements. Snap-On 15 mm rods for quick attachment, removal, and repositioningReliable build quality with CNC Machined Aluminium PartsAdjustable gear arm which puts the gear at the optimal positionDesigned with standard accessory port for whips or cranks2 x 0.8 Pitch Gears: 28 & 43 teethtwo adjustable hard stopsRemovable Marking DiscKnob is not reversible

SHAPE Lightweight Single Filter Tray 4X5.6 Matte Box A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a large variety of wide angle lenses. A single filter tray system with an easy access handle that allow one-handed filter change. The filter tray system opens up from the front by releasing the red safety pin. 4×4 filters can also be installed in the tray. The frame includes two stops at the bottom of the filter tray section to prevent the filter from falling through. Optional removable swing-away and height adjustable rod bloc can be installed for better control. An optional removable light carbon fiber french flag can be attached on top to prevent flares. A series of adaptor rings are included in the kit: Clamp-on adaptor ring: 124-87 mmThreaded aluminum adaptors rings: 87-82 mm / 87-77 mm / 87-72 mm / 87-67 mmAdditional clamp-on adaptor rings available (Optional): 124-114 mm / 124-104 mm / 124-100 mm / 124-95 mm Features Lightweight and compact design.Single filter tray system.Clip-on configuration.Removable silicone shade box.5 x adaptor rings, 4 threaded.Removable swing-way & height adjustable rod bloc (optional).Removable carbon fiber french flag (optional)

SHAPE Matte Box Clip-On A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a large variety of wide angle lenses.Two 4×5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4×4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. Removable light carbon fiber french flag can be attached on top to prevent flares. A series of adapter rings are included in the kit. Features Lightweight and compact designTwo 4 x 5.6 filter trays (one rotary)Removable silicone shade box5 x removable rings and carbon fiber french flag Technical data Weight: 0.68 kgDimensions: 24.13 x 15.24 x 7.62 cmClamp-on adapter ring: 124-87 mmThreaded aluminium adapter: 87-82mm / 87- 77mm / 87-72mm / 87-67mm In the box Two 4 x 5.6 filter trays (one rotary)Removable silicone shade box5 x removable rings and carbon fiber french flag

SHAPE Matte Box Swing-Away A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a variety of wide-angle lenses. Two 4×5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4×4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. The removable swing-away module makes lens changes a snap. A spring pin helps to lock the mechanism closed without manually setting the pin. 2 magnets hold it in place when closed. Removable height adjustable rod block with one tightening knob allows micro-adjustment of height, ensuring compatibility with a wide range of lenses. The rod block can be re-installed directly on the main frame for a straight configuration. The complete kit allows three different configurations, (swing-away, straight and clip-on).Removable light carbon fiber french flag can be attached to the top to prevent flares. A series of adapter rings are included in the kit. Features Lightweight and compact designRemovable silicone shade boxSwing-away system15mm LWS rod bracketTwo 4×5.6 filter trays (one rotary)Three different configurations in one kit. (Swing-away, straight, clip on)6 removable adapter rings and carbon fiber French flag Technical data Weight: 0.86 kgDimensions: 24.12 x 17.78 x 10x16 cmClamp-on adapter ring: 124-87 mmThreaded aluminium adapter rings: 87-82 mm / 87-77 mm / 87-72 mm / 87-67 mmFabric knicker: 124 mm

SHAPE Pivoting mounting plate SKU: PMPW The SHAPE pivoting mounting plate is designed to mount portable wireless microphone, receivers, hard drive, wireless transmission system and other accessories to your camera. It can be mounted to any 1/4-20 or 3/8-16 threaded hole on your camera, cage, or cheese plate. It features an Anti-slip hook and loop buckle strap that cinches tight against your wireless receiver and presses into the deep rubber padded plate. It has a multiple 1/4-20 thread holes on top and bottom for extra secure attachment. The wireless receiver mounting plate has a friction pivoting angled bracket with multiple mounting possibility. By pivoting up and down it doesn’t obstruct any control button of your camera. The bracket for the mic receiver/accessories can be attached on the left or right side top or back of the camera. Key Features Attaches to Camera top plate or side plates. Supports Mic Receivers/Other Accessories CNC Lightweight anodise aluminum ¼-20 camera screw and 3/8 to 1/4 reducer Anti-slip hook and loop buckle strap

SHAPE single rod follow focus SKU: FA123 Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.  At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminum 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it’s tightened by a locking lever. The clamp’s rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11″ whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. At the center of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crank;All gears can be flipped to the front or back position which is helpful for compact lens configurations;Two rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera body;Swing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you’re ready;A compact design takes little space, so you can still attach a matte box to the front;Use the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place. In the box 1 x FOLLOW FOCUS5 x GEAR WHEEL (M 0.5/78T ; M 0.6/64T; M 0.8/38T; M 0.8/43T; M 0.8/78T)1 x SPEED CRANK1 x 11’’ WHIP4 x MARKING DISK WITH MAGNET1 x FRICTION RUBBER WHEEL 49MM

SHAPE Sony FX3/FX30 Kit Matte Box Follow FocusSKU: FX3KITSony FX3/FX30 Cage (FX3CAGE)CNC-milled aluminum cage specifically designed to protect and support the Sony FX3/FX30. Includes a cold shoe, ARRI rosette, seven 3/8-16 threaded mount points, and multiple 1/4-20 threaded mount points. The cage design allows access to all camera controls and side outputs, as well as memory cards, battery compartment, lens release, doors, locks, and hot shoe. In addition, A detachable lock protection system to secure and hold in place your 4K FULL HDMI cable is included with the cage. Also included is a top plate with a left-hand threaded ARRI hole patterns that fits on top of Sony’s factory handle. The cage can be fitted with a quick release tripod plate or DELTA adapter.SHAPE MATTE BOX SWING-AWAY (AKSWA)A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a variety of wide-angle lenses. Two 4x5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4x4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. The removable swing-away module makes lens changes a snap. A spring pin helps to lock the mechanism closed without manually setting the pin. 2 magnets hold it in place when closed. Removable height adjustable rod block with one tightening knob allows micro-adjustment of height, ensuring compatibility with a wide range of lenses. The rod block can be re-installed directly on the main frame for a straight configuration. The complete kit allows three different configurations, (swing-away, straight and clip-on). Removable light carbon fiber french flag can be attached to the top to prevent flares. A series of adapter rings are included in the kit: =Clamp-on adapter ring: 124-87 mm =Threaded aluminium adapter rings: 87-82 mm 87-77 mm 87-72 mm 87-67 mm = Fabric knicker: 124mmSHAPE kit focus single rod follow focus 15 mm LWs (FA123)Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens. At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminum 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever.The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T.The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel.At the center of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crankAll gears can be flipped to the front or back position which is helpful for compact lens configurationsTwo rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera bodySwing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you're readyA compact design takes little space, so you can still attach a matte box to the frontUse the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place.15 mm 10 in rods (15TUBE10)One pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig.15-mm diameter10-in lengthHollow, non-threadedTapered ends for easy connection to a rod blockAluminium coated with a clear finish

SHAPE WAGON 40’’ Camera cart The SHAPE WAGON 40’’ Camera cart is designed for the convenience of pro filmmakers, videomakers , photographers, camera assistants or any member of a Film/TV crew, its design allows several different applications possible. This travel-friendly cart makes moving around to different locations very easy.Manufactured with CNC precision, and made of steel and aluminum alloy, it ensures durability and is capable of supporting loads exceeding 200 Kg. Equipped with all-terrain sturdy inflatable wheels, it can withstand any kind of uneven surfaces and conditions. Its back wheels include a 360° swivel caster and a high-load foot brake system. The wheels can be attached via an aluminum dovetail adapter with safety pins and a locking mechanism.It offers an abundance of expandable interfaces on all four corner posts to facilitate the connection of extendable light stands and for coherent connection with various external accessories on all sides. The upright posts lock into place with ergonomic levers and will not loosen over time. Glass-filled nylon corners makes this camera cart rigid and stable. Two height adjustable handles at the back will make it very easy to transport and maneuver.The 40’’ WAGON requires no tools for assembly/disassembly, so it can be built or broken down with ease in just a few minutes. It breaks down into a travel case of just 17cm height with a travel handle and built-in transport wheels when in collapsed (folded) mode. A spring-loaded latch system secures the collapsed cart in place. Two side handle cutouts will make your life easier when loading/unloading. The front fence included 1/4’’-20 & 3/8’’-16 threaded holes with ARRI standard anti-rotating for accessory attachment. It includes a foldable back fence offering office workspace on set or on location. Two carpeted mats are included to keep your camera equipment scratch-free and noise-free, offering smoother operations. To personalize a Film/TV crew’s cart, an aluminum nameplate is included and can be engraved with the user’s own name. (optional). The WAGON 40’’ camera cart has a 3-year warranty.Features Expandable interfaces on all 4 corners posts to facilitate the connection of extendable light stands, and accessories on all sidesTop & Bottom shelves snap and lock into place to secure contentsTwo height adjustable crossbars equipped with 3/8’’-16 threaded holes to secure accessories, attach to aluminum posts with clear height marking referencesThreaded fences with 1/4’’-20 & 3/8’’-16 with ARRI standard anti-rotating for accessory attachmentRigid & stable construction with glass-filled nylon cornersHeight adjustable rear handles for easy transportation and maneuveringEquipped with all-terrain sturdy inflatable 10'' wheels with brakes on 360° swivel back wheelsAluminum dovetail adapters with safety pin for wheel attachmentBreaks down into a travel case with travel handle and built-in transport wheelsDesigned for easy storage & transport when in collapsed (folded) modeIncludes an aluminum nameplate that can be personalized with the user’s own name, engraved on the plate (optional)Dimensions assembled: 68 x 115.5 x 101.6 cm (WxLxH)Weight: 52.62 KgCollapes to 17cm thick with wheels insideCapable of supporting loads of 200KgManufactured with CNC precision, ensuring durability

SIGMA 18-35mm F1.8 DC HSM Art Truly a revolutionary product, the Sigma 18-35mm 1.8 DC HSM is the first wide-angle to standard zoom lens to achieve a large aperture of 1.8. Designed specifically for APS-C sized sensors, the Sigma 18-35mm 1.8 translates to 27mm-52.5mm on 35mm camera. Tapping into Sigma’s long history of lens innovations, the 18-35mm 1.8 DC HSM incorporates a wide glass molded aspherical lens with Special Low Dispersion (SLD) glass to compensate for aberrations and curvature at the widest angle. Internal focusing and zooming allows for more usability and functionality. The SIGMA 18-35mm is ideal for landscape photography, portrait photography, still life photography, snap shots, casual photography, and close-ups and the Hyper Sonic Motor (HSM) ensures smooth, fast and accurate autofocusing. The use of Thermally Composite Material (TSC) reduces size and weight but increases accuracy of the lens construction. Its new Global Vision design works features compatibility with the Sigma USB dock for further customization. A 9 blade rounded diaphragm also creates beautiful background blur. The Sigma 18-35mm 1.8 DC HSM is a new benchmark in photographic history and a must have for every camera bag.SIGMA 18-35mm Technical data Lens Construction: 17 Elements in 12 GroupsAngle of View (SD1): 76.5º-44.2ºNumber of Diaphragm Blades: 9Mininum Aperture: f16Minimum Focusing Distance: 28 cmFilter Size: 72mmMaximum Magnifications: 1:4.3Dimensions: 78mm x 121.0mmWeight: 810gCorresponding Mounts: SIGMA SA-Mount, Nikon F-Mount, Canon EF-Mount

SIGMA 18-35mm F1.8 DC HSM Art Truly a revolutionary product, the Sigma 18-35mm 1.8 DC HSM is the first wide-angle to standard zoom lens to achieve a large aperture of 1.8. Designed specifically for APS-C sized sensors, the Sigma 18-35mm 1.8 translates to 27mm-52.5mm on 35mm camera. Tapping into Sigma’s long history of lens innovations, the 18-35mm 1.8 DC HSM incorporates a wide glass molded aspherical lens with Special Low Dispersion (SLD) glass to compensate for aberrations and curvature at the widest angle. Internal focusing and zooming allows for more usability and functionality. The SIGMA 18-35mm is ideal for landscape photography, portrait photography, still life photography, snap shots, casual photography, and close-ups and the Hyper Sonic Motor (HSM) ensures smooth, fast and accurate autofocusing. The use of Thermally Composite Material (TSC) reduces size and weight but increases accuracy of the lens construction. Its new Global Vision design works features compatibility with the Sigma USB dock for further customization. A 9 blade rounded diaphragm also creates beautiful background blur. The Sigma 18-35mm 1.8 DC HSM is a new benchmark in photographic history and a must have for every camera bag.SIGMA 18-35mm Technical data Lens Construction: 17 Elements in 12 GroupsAngle of View (SD1): 76.5º-44.2ºNumber of Diaphragm Blades: 9Mininum Aperture: f16Minimum Focusing Distance: 28 cmFilter Size: 72mmMaximum Magnifications: 1:4.3Dimensions: 78mm x 121.0mmWeight: 810gCorresponding Mounts: SIGMA SA-Mount, Nikon F-Mount, Canon EF-Mount

SIGMA 50-100mm F1.8 DC HSM Art The Sigma 50-100mm 1.8 DC HSM Art is a premium mid telephoto zoom lens designed for APS-C sized sensors. Part of the Sigma Global Vision Art Line, the 50-100mm 1.8 is the second lens to feature a 1.8 aperture all the way through it focal length and factoring in the APS-C increase, the lens covers a highly useful range of 75-150mm. An enhanced and slimmer Hyper Sonic Motor (HSM) provide fast and accurate autofocus while 3 Premium FLD and 1 SLD Elements produce incredible image sharpness. Like all SGV lenses, each lens is hand crafted in our single factory in Aizu Japan, individually inspected before shipping and work with the Sigma USB Dock to update firmware and focus calibrate.SIGMA 50-100mm Technical data Lens Construction: 21 Elements in 15 GroupsAngle of View: 31.7-16.2ºNumber of Diaphragm Blades: 9 (Rounded)Mininum Aperture: f16Minimum Focusing Distance: 95 cmFilter Size (mm): 82mmMaximum Magnifications: 1: 6.7Dimensions: 93,5 mm x 170,7 mmWeight: 1490 gAvailable mounts: SIGMA SA-Mount, Nikon F-Mount, Canon EF-Mount

SIGMA 50-100mm F1.8 DC HSM Art The Sigma 50-100mm 1.8 DC HSM Art is a premium mid telephoto zoom lens designed for APS-C sized sensors. Part of the Sigma Global Vision Art Line, the 50-100mm 1.8 is the second lens to feature a 1.8 aperture all the way through it focal length and factoring in the APS-C increase, the lens covers a highly useful range of 75-150mm. An enhanced and slimmer Hyper Sonic Motor (HSM) provide fast and accurate autofocus while 3 Premium FLD and 1 SLD Elements produce incredible image sharpness. Like all SGV lenses, each lens is hand crafted in our single factory in Aizu Japan, individually inspected before shipping and work with the Sigma USB Dock to update firmware and focus calibrate.SIGMA 50-100mm Technical data Lens Construction: 21 Elements in 15 GroupsAngle of View: 31.7-16.2ºNumber of Diaphragm Blades: 9 (Rounded)Mininum Aperture: f16Minimum Focusing Distance: 95 cmFilter Size (mm): 82mmMaximum Magnifications: 1: 6.7Dimensions: 93,5 mm x 170,7 mmWeight: 1490 gAvailable mounts: SIGMA SA-Mount, Nikon F-Mount, Canon EF-Mount

SIGMA 50-100mm F1.8 DC HSM Art The Sigma 50-100mm 1.8 DC HSM Art is a premium mid telephoto zoom lens designed for APS-C sized sensors. Part of the Sigma Global Vision Art Line, the 50-100mm 1.8 is the second lens to feature a 1.8 aperture all the way through it focal length and factoring in the APS-C increase, the lens covers a highly useful range of 75-150mm. An enhanced and slimmer Hyper Sonic Motor (HSM) provide fast and accurate autofocus while 3 Premium FLD and 1 SLD Elements produce incredible image sharpness. Like all SGV lenses, each lens is hand crafted in our single factory in Aizu Japan, individually inspected before shipping and work with the Sigma USB Dock to update firmware and focus calibrate.SIGMA 50-100mm Technical data Lens Construction: 21 Elements in 15 GroupsAngle of View: 31.7-16.2ºNumber of Diaphragm Blades: 9 (Rounded)Mininum Aperture: f16Minimum Focusing Distance: 95 cmFilter Size (mm): 82mmMaximum Magnifications: 1: 6.7Dimensions: 93,5 mm x 170,7 mmWeight: 1490 gAvailable mounts: SIGMA SA-Mount, Nikon F-Mount, Canon EF-Mount