MID49 TWIST Mount Monitor AdapterTWIST Mount Monitor Right Angle Spud Adapter allows monitors with top and bottom mounting points to be adapted to the TWIST Mount System. The kit includes the right-angle adapter and three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm.Choose the appropriate Spud, attach it to the top or bottom of your monitor, select the appropriate length of rod, and install that into the TWIST Mount Knuckle (sold separately).Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P II Works with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor AdapterTWIST Mount Monitor Right Angle Spud Adapter allows monitors with top and bottom mounting points to be adapted to the TWIST Mount System. The kit includes the right-angle adapter and three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm.Choose the appropriate Spud, attach it to the top or bottom of your monitor, select the appropriate length of rod, and install that into the TWIST Mount Knuckle (sold separately).Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P II Works with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor AdapterTWIST Mount Monitor Right Angle Spud Adapter allows monitors with top and bottom mounting points to be adapted to the TWIST Mount System. The kit includes the right-angle adapter and three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm.Choose the appropriate Spud, attach it to the top or bottom of your monitor, select the appropriate length of rod, and install that into the TWIST Mount Knuckle (sold separately).Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P II Works with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor AdapterTWIST Mount Monitor Right Angle Spud Adapter allows monitors with top and bottom mounting points to be adapted to the TWIST Mount System. The kit includes the right-angle adapter and three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm.Choose the appropriate Spud, attach it to the top or bottom of your monitor, select the appropriate length of rod, and install that into the TWIST Mount Knuckle (sold separately).Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P II Works with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor KitTWIST Mount Monitor Kit includes the Double Sided NATO Rail to 15mm Rod, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately). The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removal. Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. The Right Angle Spud Adapter allows monitors without side mounting points to be adapted to the TWIST Mount system and includes three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm. Choose the appropriate Spud screw type, attach it to the top or bottom of your monitor, choose the appropriate length of rod, and install into the TWIST Knuckle.Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P IIWorks with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor KitTWIST Mount Monitor Kit includes the Double Sided NATO Rail to 15mm Rod, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately). The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removal. Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. The Right Angle Spud Adapter allows monitors without side mounting points to be adapted to the TWIST Mount system and includes three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm. Choose the appropriate Spud screw type, attach it to the top or bottom of your monitor, choose the appropriate length of rod, and install into the TWIST Knuckle.Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P IIWorks with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor KitTWIST Mount Monitor Kit includes the Double Sided NATO Rail to 15mm Rod, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately). The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removal. Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. The Right Angle Spud Adapter allows monitors without side mounting points to be adapted to the TWIST Mount system and includes three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm. Choose the appropriate Spud screw type, attach it to the top or bottom of your monitor, choose the appropriate length of rod, and install into the TWIST Knuckle.Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P IIWorks with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor KitTWIST Mount Monitor Kit includes the Double Sided NATO Rail to 15mm Rod, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately). The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removal. Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. The Right Angle Spud Adapter allows monitors without side mounting points to be adapted to the TWIST Mount system and includes three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm. Choose the appropriate Spud screw type, attach it to the top or bottom of your monitor, choose the appropriate length of rod, and install into the TWIST Knuckle.Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P IIWorks with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor KnuckleTWIST Mount Monitor Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. The Right Angle Spud Adapter allows monitors without side mounting points to be adapted to the TWIST Mount system and includes three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm.Choose the appropriate Spud screw type, attach it to the top or bottom of your monitor, choose the appropriate length of rod, and install into the TWIST Knuckle.Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P IIWorks with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor KnuckleTWIST Mount Monitor Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. The Right Angle Spud Adapter allows monitors without side mounting points to be adapted to the TWIST Mount system and includes three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm.Choose the appropriate Spud screw type, attach it to the top or bottom of your monitor, choose the appropriate length of rod, and install into the TWIST Knuckle.Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P IIWorks with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor KnuckleTWIST Mount Monitor Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. The Right Angle Spud Adapter allows monitors without side mounting points to be adapted to the TWIST Mount system and includes three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm.Choose the appropriate Spud screw type, attach it to the top or bottom of your monitor, choose the appropriate length of rod, and install into the TWIST Knuckle.Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P IIWorks with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount Monitor KnuckleTWIST Mount Monitor Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. The Right Angle Spud Adapter allows monitors without side mounting points to be adapted to the TWIST Mount system and includes three lengths of 15mm rod with the TWIST groove on the end: 50mm, 100mm, and 150mm.Choose the appropriate Spud screw type, attach it to the top or bottom of your monitor, choose the appropriate length of rod, and install into the TWIST Knuckle.Spud OptionsOld-Style SmallHD 1/4-20Older version SmallHD monitors where locating pins are short and wideWorks with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5Works with SmallHD AC7, Indie 7, 702, 703ARRI 1/4-20 (3mm pins spaced 10.4mm apart)Works with Blackmagic Video Assist (remove locating pins)Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)ARRI 3/8-16 (3mm pins spaced 15mm apart)Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Sony / PortKeys 1/4-20Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P IIWorks with PORTKEYS PT5 II, PT6Works with PORTKEYS LH7P, LH7H, HD7HWorks with PORTKEYS BM7 II DS U, HS8

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained

MID49 TWIST Mount SpudTWIST Mount Spud with ARRI 1/4-20Works with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1TWIST Mount Spud with ARRI 3/8-16Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)TWIST Mount Spud with Old-Style SmallHD 1/4-20Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount Spud with ARRI M6 RosetteWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYETWIST Mount Spud with Sony / PortKeys 1/4-20Works with Sony Burano directly and also the EVF Pivot AdapterWorks with PORTKEYS LH7P (be careful, the monitor is plastic)Works with PORTKEYS 5” BM5 IVTWIST Mount Spud with L Bracket 1/4-20Includes the L Bracket with two 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFThis can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO railTWIST Mount Spud with Female ARRI 1/4-20Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount Spud with Female ARRI 3/8-16Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount Spud for 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-ViewfinderWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFThis is NOT a regular ARRI rosetteTWIST Mount Spud for ARRI Viewfinder WedgeWorks with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.Works with 3rd party products that utilize ARRI-style mounting wedges.TWIST Mount Spud for Blackmagic Viewfinder WedgeWorks with URSA Cine EVF - CINEURSAB/EVFWorks with URSA Cine EVF Extension - CINEURSAB/EVFEXTWorks with PYXIS Monitor Kit - CINEURSABB/AMKITTWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)Works with Sony Venice Viewfinder Wedge (DVF-EL200)TWIST Mount Spud for Sony FX6Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained