Hollyland Mars M1 Enhanced The Mars M1 Enhanced is a versatile wireless monitor that integrates transmitter, receiver, and monitoring functions into one solution. The 5.5″ touch screen with groundbreaking advantages such as accurate color calibration and Rec.709 color gamut, delivers a pleasant monitoring experience with professional image analysis functions. The device supports an impressive LOS range of up to 450ft (150m) and boasts a low latency of only 0.08 seconds, allowing for more flexibility in device deployment and ensuring seamless monitoring without noticeable lag. The Mars M1 Enhanced wireless transmission monitor is a powerful and comprehensive solution for all your monitoring needs. Because it is an all-in-one device integrating the functionalities of a transmitter, receiver, and monitor into a single solution, you can effortlessly switch between the transmitter and receiver modes on its settings interface. Furthermore, a single Mars M1 Enhanced transmitter can seamlessly connect with up to two receivers or four mobile device apps. The Hollyland Mars M1 Enhanced is a top-quality monitor with excellent color accuracy. Its highly responsive 5.5″ LCD touch screen and outstanding brightness of up to 1,000 nits make it perfect for outdoor use. The monitor undergoes a color calibration process during manufacturing, ensuring that every image is displayed with stunning resolution, vivid details, and unmatched color accuracy. Additionally, you can fine-tune the RGB gain using a simple reset option to achieve the perfect colors suitable for your needs. 5.5" Wireless Transceiving Monitor - In the box 1 x Hollyland Mars M1 Enhanced2 x Capsule Antenna1 x Tempered Glass Screen Protector1 x USB-C Converter1 x D-Tap to Locking DC Power Cable DUAL 5.5" Wireless Transceiving Monitor - In the box 2 x Hollyland Mars M1 Enhanced4 x Capsule Antenna2 x Tempered Glass Screen Protector2 x USB-C Converter2 x D-Tap to Locking DC Power Cable

Hollyland Mars M1 Enhanced The Mars M1 Enhanced is a versatile wireless monitor that integrates transmitter, receiver, and monitoring functions into one solution. The 5.5″ touch screen with groundbreaking advantages such as accurate color calibration and Rec.709 color gamut, delivers a pleasant monitoring experience with professional image analysis functions. The device supports an impressive LOS range of up to 450ft (150m) and boasts a low latency of only 0.08 seconds, allowing for more flexibility in device deployment and ensuring seamless monitoring without noticeable lag. The Mars M1 Enhanced wireless transmission monitor is a powerful and comprehensive solution for all your monitoring needs. Because it is an all-in-one device integrating the functionalities of a transmitter, receiver, and monitor into a single solution, you can effortlessly switch between the transmitter and receiver modes on its settings interface. Furthermore, a single Mars M1 Enhanced transmitter can seamlessly connect with up to two receivers or four mobile device apps. The Hollyland Mars M1 Enhanced is a top-quality monitor with excellent color accuracy. Its highly responsive 5.5″ LCD touch screen and outstanding brightness of up to 1,000 nits make it perfect for outdoor use. The monitor undergoes a color calibration process during manufacturing, ensuring that every image is displayed with stunning resolution, vivid details, and unmatched color accuracy. Additionally, you can fine-tune the RGB gain using a simple reset option to achieve the perfect colors suitable for your needs. 5.5" Wireless Transceiving Monitor - In the box 1 x Hollyland Mars M1 Enhanced2 x Capsule Antenna1 x Tempered Glass Screen Protector1 x USB-C Converter1 x D-Tap to Locking DC Power Cable DUAL 5.5" Wireless Transceiving Monitor - In the box 2 x Hollyland Mars M1 Enhanced4 x Capsule Antenna2 x Tempered Glass Screen Protector2 x USB-C Converter2 x D-Tap to Locking DC Power Cable

Hollyland Pyro 7 Hollyland Pyro 7 is a 7-inch wireless monitor that integrates the functionalities of TX, RX, and monitor, all in one. It utilizes Auto Dual-Band Hopping (ADH) technology. With 1,300ft (400m) and an incredibly low latency of only 60ms, Pyro 7 supports 2.4GHz/5GHz dual-band transmission and automatic frequency hopping. Its exceptional hardware design enables Pyro 7 to simultaneously connect one transmitter to four receivers, and the convenience of dual-camera monitoring is achieved through customizable shortcut keys. Additionally, the upgraded HollyOS system provides enhanced image analysis capabilities and allows for video file export via an external SD card. Pyro 7 is compatible with Pyro H and Pyro S, which means you can easily pair Pyro 7 with either Pyro H or Pyro S. This provides you with greater flexibility and scalability to meet various monitoring needs. FEATURES1TX & 4RX1300ft (400m) & 0.06s Latency2.4GHz & 5GHz Dual BandAuto Frequency HoppingTX, RX, and Monitor – All in OneDual-View Quick Monitoring Switch7 Inch & 1200 nitsPrecise Image Analysis (icon HollyOS)SDI & HDMI LoopoutRTMP Streaming Technical dataInput port: HDMI 1.4b + 3G SDIOutout port: HDMI 1.4b + 3G SDIAntenna: RP-SMA Malex2Power input: DC Input (2.0mm core socket)Headphone Jack: 3.5mmScreen Resolution: 1920 × 1200 pixelsPixel Density: 323 PPIAspect ratio: 16:9Screen Brightness: 1200 nitsScreen size: 7-inch touchscreenContrast ratio: 1000:1Power consumption: < 22WAudio format: HDMI 1.4b 8-ChannelBandwidth: 20 MHz; 40 MHz (in Broadcast mode)Transmission latency: ≈ 60ms (test data when 1080p60 signals are transmitted in a laboratory)Transmit Power: ≤ 23 dBmReceiver Sensitivity: -80 dBmDisplay Latency:< 50ms

Hollyland Pyro 7 Hollyland Pyro 7 is a 7-inch wireless monitor that integrates the functionalities of TX, RX, and monitor, all in one. It utilizes Auto Dual-Band Hopping (ADH) technology. With 1,300ft (400m) and an incredibly low latency of only 60ms, Pyro 7 supports 2.4GHz/5GHz dual-band transmission and automatic frequency hopping. Its exceptional hardware design enables Pyro 7 to simultaneously connect one transmitter to four receivers, and the convenience of dual-camera monitoring is achieved through customizable shortcut keys. Additionally, the upgraded HollyOS system provides enhanced image analysis capabilities and allows for video file export via an external SD card. Pyro 7 is compatible with Pyro H and Pyro S, which means you can easily pair Pyro 7 with either Pyro H or Pyro S. This provides you with greater flexibility and scalability to meet various monitoring needs. FEATURES1TX & 4RX1300ft (400m) & 0.06s Latency2.4GHz & 5GHz Dual BandAuto Frequency HoppingTX, RX, and Monitor – All in OneDual-View Quick Monitoring Switch7 Inch & 1200 nitsPrecise Image Analysis (icon HollyOS)SDI & HDMI LoopoutRTMP Streaming Technical dataInput port: HDMI 1.4b + 3G SDIOutout port: HDMI 1.4b + 3G SDIAntenna: RP-SMA Malex2Power input: DC Input (2.0mm core socket)Headphone Jack: 3.5mmScreen Resolution: 1920 × 1200 pixelsPixel Density: 323 PPIAspect ratio: 16:9Screen Brightness: 1200 nitsScreen size: 7-inch touchscreenContrast ratio: 1000:1Power consumption: < 22WAudio format: HDMI 1.4b 8-ChannelBandwidth: 20 MHz; 40 MHz (in Broadcast mode)Transmission latency: ≈ 60ms (test data when 1080p60 signals are transmitted in a laboratory)Transmit Power: ≤ 23 dBmReceiver Sensitivity: -80 dBmDisplay Latency:< 50ms

KUPO 162MB Monitor Stand II Monitor stand II is primary designed for securely mounting your monitor on set or location. The welded 16mm (5/8”) baby pin is also ideal for lighting fixture or any equipment comes with a 16mm (5/8”) baby receiver. The optional caster sets (KC-100M) makes the stand movable easily. Technical data 2 risers, 3 sectionsPowder coated steel standDia. 45mm; 40mm, 35mmLeg size: 25x25mmOne leveling legMay stand alone with legs folded.

KUPO Super Knuckle VESA Monitor Mount Kit The VESA Monitor Mount Kit is designed for lightweight monitors. With its Super Knuckle design, the VESA Monitor Mount Kit can easily rotate a monitor from landscape to portrait viewing. The single knob in the center tightens both ball joints simultaneously, and the 26mm dia ball has a serrated surface for secure locking. The X-design has mounting holes for VESA mount points of 75x75mm and 100x100mm. The Super Knuckle VESA Monitor Mount Kit can support up to 8kg and features a Baby 5/8" Receiver to secure it to any baby light stand, c-stand, or accessory. Features Standard VESA mounting holes 75x75mm & 100x100mmSupports up to 8kgEasy and instantaneous rotatation of a monitor from landscape to portrait viewing5/8in (16mm) Baby Receiver and knob to secure to any baby light stand, c-stand, or accessoryOne central knob securely locks two ball heads

Lilliput 719/CIntroducing the Lilliput 719/C, a versatile and rugged display designed for various working environments. With enhanced durability and a brighter 1000 nit display, it outperforms its predecessor, the 619A. Boasting a 50,000-hour panel life, it offers excellent value for money. Available in standard desktop/VESA or IP65 versions, it suits both indoor and outdoor use.Equipped with USB-C and HDMI connectivity, supporting up to 4K 60Hz input, it meets the latest standards. Plus, it includes a VGA port for legacy inputs up to 1080p resolution. Ideal for diverse applications, it combines durability, performance, and connectivity in one sleek package.FEATURESDisplay:7" / 1280×800 / 1000 nitsInput:HDMI, VGA, USB-CAudio In/Out:Speaker, HDMI, Ear JackFeature:1000nits Brightness, 10-points PCAP, IP65 Rating, Auto Dimming, ISO7637-2

Lilliput A11 The 10.1" A11 4K HDMI & 3G-SDI Monitor from Lilliput is a field monitor designed for on-camera use with video, DSLR, and mirrorless cameras. This Full HD panel monitor features both 4K HDMI input/output, 3G/HD/SD-SDI input and output, a VGA input, 1000:1 contrast, and 320 cd/m² brightness. FeaturesDisplay: 10.1inch1920x1200,320cd/m2,1000:1Interfaces: 3G-SDI, HDMI, VGAFunction: Level Meter/Histogram, Exposure, Peaking Filter, Aspect Marker, False Color Filter, Zoom, etc Contents12V DC AdapterSunshadeHDMI A/C cableShoe mountNP-F series plateVESA mount plateManual

Lilliput A7s The A7S 7" Full HD Monitor with red rubber case from Lilliput features an HDMI 1.4 input, making it suitable for UHD 4K filmmaking and photography. With a 16:10 aspect ratio and 1000:1 contrast ratio, the LCD panel displays Full HD images. The HDMI loop-through function allows you to output via HDMI to any other compatible device. FeaturesDisplay: 7inch 16:10Resolution: 1920x1200Brightness: 500cd/m2Contrast: 1000:1Viewing Angle: 170°/170°(H/V)with HDMI input and output input ContentsSilicon rubber caseSunshadeHDMI A/C cableShoe mountF970 battery plateManual

Lilliput H7S Monitor your 4K camera images with the H7S 7" 4K HDMI/3G-SDI Ultra-Bright On-Camera Monitor from Lilliput. The H7S features 3G-SDI and HDMI 1.4 inputs, making it suitable for DCI 4K24 and UHD 4K filmmaking and photography. With a 16:10 aspect ratio, an ultra-bright 1800 cd/m² display, and a 1200:1 contrast ratio, the LCD panel displays Full HD images natively in 1920 x 1200, up to a maximum resolution of 2840 x 2160. The HDMI loop-through output function allows you to output via 3G-SDI or HDMI to any other compatible device. The H7S supports loading 3D LUTs via the USB port on the bottom, and it supports HDR image input with the ability to display a wide dynamic range such as ST2084-300, ST2084-1000, ST2084-10000, and HLG (Hybrid Log Gamma).On the back of the monitor is a dual L-series battery plate so you can power the monitor for a long shoot. The batteries are also hot-swappable so you can charge one battery and then swap out the other while the monitor is in use, without having to power it down. FeaturesDisplay: 7 inchResolution: 1920x12001200:1,Viewing Angle: 160°/160° ·(H/V)Interfaces: HDMI input and output, Tally, EarphoneSoftware function: 3D LUT, HDR, Peaking Filter, False Color Filter, Exposure, Histogram, Aspect markerContentsHDMI A/C cableTally Control LineMini Shoe mountUSB Drive DiskManual Carry-on Bag

Lilliput Q10The Lilliput Q10 is a professional camera-top monitor specifically designed for photography and film makers. Fitted with an amazing 1500 nit Ultra Bright LCD screen, it is especially geared for outdoor video and film shooting.The 10.1" LCD panel has 1920×1200 Full HD native resolution and with 200:1 high-contrast it provides crystal-sharp superior picture quality. Supporting 4K HDMI 2.0 and 12G-SDI signal inputs and loop outputs, it is possible to receive 2× 12G-SDI signals and display both at the same time via the picture-in-picture function, (the size and position of which can be adjusted) and HDMI signals up to 4K 60Hz through an HDMI 2.0 interface - making it compatible with the very latest DSLR cameras on the market. Features10.1" inch panel with 1920*1200 resolution1500cd/m²brightness, 1000:1 contrast, 170°/170°viewing angleInput Ports: 2x12G-SDI, 1xHDMI 2.0, TallyOutput Ports: 2x12G-SDI loop, 1xHDMI 2.0Audio: Built-in speaker, Earphone jack12G-SDI Multiview modeHDMI 2.0 supporting up to 4K 60HzFunctions: Multiview, 3D-LUT, HDR, Delicate Milled, camera auxiliary functions etcVESA 75mm Battery plate Technical dataDisplayAspect Ratio; 16:10Brightness: 1500 nitsContrast Ratio: 1000:1Display Screen: 10.1"Look Up Table Support: 3D LUT .cube FormatResolution: 1920 x 1200Viewing Angle: 170° / 170°HDR: ST2084 300 / 1000 / 10000 / HLGSupported Log Formats: SLog2 / SLog3 / CLog / NLog / ArriLog / JLog or User definedConnectionsAudio: SDI - 16CH, 48Khz, 24-bit : HDMI - 8 CH 24 Bit : Ear Jack - 3.5mm : Built in Speaker x1HDMI Video Input: 1x HDMI 2.0 - 2160p 60/50/30/25/24, 1080p 60/50/30/25/24, 1080i 60/50, 720p 60/50SDI Video Input; 2x 12G SDI - 2160p 60/50/30/25/24, 1080p 60/50/30/25/24, 1080pSF 30/25/24,1080i 60/50, 720p 60/50SizeDimensions: 251mm × 170mm × 30.5mmWeight: 4KG (Shipping Weight)PowerInput Voltage: DC 7-24VPower Consumption: <=37W (12V)EnvironmentOperating Temperature: 0°c to 50°cStorage Temperature: -20°c to 60°c

Lilliput Q7-12GThe Lilliput Q7-12G is a professional camera-top monitor for photographers and film makers, especially designed for outdoor video and film shooting. Equipped with an outstanding 2000 nit (cdm²) Ultra Bright LCD screen, this 7 inch LCD monitor has 1920×1200 Full-HD native resolution and sports a 1200:1 high contrast image reproduction. Supporting 4K HDMI and 12G-SDI signal inputs and loop outputs, the Q7-12G provides superior picture quality and maximum interoperability with your current, and future workflows. Features7 inch with 1920*1200 physical resolution2000cd/m² brightness, 1200:1, 170°/170° viewing angleInputs: 2x12G-SDI, 1xHDMI 2.0, 1*Tally, 1xUSB (for upgrade), 1*DCLoop outputs: 2x12G-SDI, 1*HDMI 2.0Functions: PIP, Waveform, Vector Scope, HDR, 3D-LUT, Tally, Peaking, etc.Housing: Aluminum CNC housingSupporting VESA 75mm mount, U-shade bracket Technical dataDisplayAspect Ratio: 16:10Brightness: 2000 nitContrast Ratio: 1200:1Look Up Table Support: 3D LUT (.cube format)Resolution: 1920 x 1200Viewing Angle: 170° / 170° H/VHDR: ST2084 300/1000/10000/HLGScreen Size: 7"Supported Log Formats: SLog2 / SLog3 / CLog / NLog / ArriLog / JLog or UserSupported FormatsHDMI Formats Supported: 2160p 60/50/30/25/24, 1080p 60/50/30/25/24, 1080i 60/50, 720p 60/50DI Formats Supported: 2160p 60/50/30/25/24, 1080p 60/50/30/25/24, 1080pSF 30/25/24, 1080i 60/50, 720p 60/50Video Loop OutputSDI Video Loop: 2×12G-SDIFormatsHDMI Input Format Support: 1×HDMI 2.0SDI Input Format Support: 2×12G-SDIOutputsHDMI Video Outputs: 1×HDMI 2.0Tally: 1

Lilliput RM-1730S The LILLIPUT RM-1730S 17.3" Full HD 3G-SDI/HDMI Pullout Rackmount Monitor features a 16:9 IPS panel and offers a maximum resolution of 1920 x 1080p60. It provides a brightness rating of 300 cd/m2, a contrast ratio of 700:1, and viewing angles of 178°. The monitor comes with a host of functions including cross conversion, timecode, pixel zoom, vectorscope. Technical data Display Size: 17.3”Resolution: 1920×1080Brightness: 330cd/m²Aspect ratio: 16:9Contrast: 700:1Viewing Angle: 178°/178°(H/V)Video InputSDI: 1×3GHDMI: 1xHDMI 1.4DVI: 1LAN: 1 Video Loop Output （SDI / HDMI cross conversion） SDI: 1x3GHDMI: 1xHDMI 1.4 Supported In / Out Formats SDI: 720p 50/60, 1080i 50/60, 1080pSF 24/25/30, 1080p 24/25/30/50/60HDMI: 720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60 Audio In/Out (48kHz PCM Audio) SDI: 12ch 48kHz 24-bitHDMI: 2ch 24-bitEar Jack: 3.5mmBuilt-in Speakers: 2 Power Operating power: ≤32WDC In: DC 10-18V Environment Operating Temperature: -20℃~60℃Storage Temperature: -30℃~70℃ Other Dimension(LWD): 482.5 mm x 44 mm x 507.5mmWeight: 8.6kg (with case)

Lilliput RM-1731Introducing Lilliput RM-1731, a powerful 17.3-inch IPS display designed for optimal viewing experiences. With a Full HD resolution of 1920x1080 and an aspect ratio of 16:9, it delivers crisp, clear visuals perfect for various applications. Housed in a sleek metal casing, it exudes durability and style. With a brightness of 300 cd/m^2, your content shines even in well-lit environments. Equipped with HDMI and LAN inputs, it offers versatile connectivity options for seamless integration into your setup. Whether for work or entertainment, this monitor ensures immersive viewing experiences with impeccable clarity and reliability. Screen Size: 17.3 inchesResolution: 1920x1080Screen: IPSAspect Ratio: 16:9Housing Material: MetalBrightness: 300 cd/m^2Inputs: HDMI, LAN Technical dataSize: 17.3”Resolution: 1920×1080Brightness: 300cd/m²Aspect ratio: 16:9Contrast: 800:1Viewing Angle: 170°/170°(H/V)Video Loop InputHDMI: 1×HDMI 2.0LAN: 1Video Loop OutputHDMI: 1×HDMI 2.0Supported In / Out FormatsSDI: 720p 50/60, 1080i 50/60, 1080pSF 24/25/30, 1080p 24/25/30/50/60…HDMI: 720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60,2160P 24/25/30/50/60Audio In/OutSDI: 12ch 48kHz 24-bitHDMI: 8ch 24-bitEar Jack: 3.5mm – 2ch 48kHz 24-bitBuilt-in Speakers: 2OtherOperating power: ≤14W(12V)DC In: DC 10-24VOperating Temperature: 0℃~50℃Storage Temperature: -20℃~60℃Dimension(LWD): 482.5×44×507.5mmWeight: 8.9kg (with case)

Lilliput UQ23 4K production monitorThe Lilliput UQ23 is a portable 4K production monitor with a 23.8-inch diagonal, 1200 nits high brightness and 10-bit color depth. The monitor'senhanced user interface consists of a three-level menu and F1-F4 buttons and knobs whose functions can be customized. The Lilliput UQ23 can be controlled remotely via the app. The Quad-Split multiview function allows simultaneous viewing of multiple sources. Good sunlight readabilityThe 1200 nits brightness screen not only provides the director with accurate colors even in outdoor use, but also, in combination with the HDR algorithm, delivers exceptional image quality that plays an important role in post-production. HDR supports both HLG and PQ (ST2084 300/1000/10000)A+ accurate colour renderingThe A+ quality screen with 1.07 billion colour depth ensures faithful colour reproduction8K 12G-SDI, HDMI video signal4x12G-SDI (Single- and Quad-link) offers support for ST2082-10 and ST2082-12. 12G-SDI quad-link generates video signal up to 4K 60Hz. The monitor also offers 12G SFP+ support and HDMI 2.1 input and loop outputFeatures23.8" display, 3840×1200, 1200 nits brightness4K screen, 10-bit color depth and 100% DCI-P3 coverage4×12G-SDI and HDMI 2.1 inputs and loop outputsEnhanced user interface and new featuresQuad-split display and remote controlDurable carrying case

Marshall ML-454-V2 The Marshall ML-454 Quad 4.5" Screens LCD Display is a feature-packed, economical solution perfect for fly-packs, control rooms, routing rooms and countless other video system applications. Looping video inputs set this product apart from similar-looking products. With the ML-454, you are not limited to the single SDI connector you may find on competitor models. Standard power and tally connections as well as a logical menu structure make this display an easy choice for flexible system designs. Features High resolution 1280 x 800 bright, colorful display with no-compromise input selections for each screenDigital inputs: HDMI, 3GSDIMulti-screens in 2RU(3.5") HeightSlim Compact Panel - only 1.4" deepBright screens with great off-axis performanceCompare to space wasting, complex multi-view systemsExcellent Power EfficiencySDI and AVBS inputs have active loop through outputsOn-screen 3-color Tallies

MID49 Monitor Hinge (Canon C300mkIII, C500mkII)SKU: M49-MON-CAN-3003 Monitor Hinge (Canon C300mkIII, C500mkII) attaches to Canon 1/4-20 striped rosettes on camera body or handle, and holds the Canon LM-V2 4.3" LCD Monitor, which is included with those cameras. Positioning arm pivots in two places using variable friction 15mm rod clamps, which allows for a smooth, tool-less repositioning of the monitor. Simply grab and adjust. On the side of the horizontal 15mm rod, a 1/4-20 and locating tabs allow for the original Canon mic holder (Canon part DG3-7370-000) to be attached using included 1/4-20 knurled knob. The rod can also be flipped, allowing the monitor to be positioned in front of the operator during hand-held shooting. Weight: 85gDimensions (WxLxH): 37 x 112 x 118mm

MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 SpudsSKU: M49-TWB-ARM3-A142-A142TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 1/4-20 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.Included in this kit are two ARRI 1/4-20, which have removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing, which can be found on some random, 3rd party products.ARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to centerSecond set of holes for 3mm pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 1/4-20 holesWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1

MID49 TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 3/8-16 SpudsSKU: M49-TWB-ARM3-A142-A38TWIST Ball Monitor Arm 3 Inch with ARRI 1/4-20 + ARRI 3/8-16 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp.With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.Included in this kit is one ARRI 1/4-20, which has removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing which can be found on some random, 3rd party products.Also included is one ARRI 3/8-16, which has removable 3mm locating pins in 15mm spacing, center to center.ARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to centerSecond set of holes for 3mm pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 1/4-20 holesWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 3/8-16 holesWorks with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)

MID49 TWIST Ball Monitor MountTWIST Ball Monitor Mount is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3, 6, and 9-inch arm kits include the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Choose your SpudsNo SpudA 15mm friction hole with no mounting spudARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center       Second set of holes for 3mm pins 15mm center to center       Works with any cheese plate or accessory with ARRI standard 1/4-20 holes       Works with Blackmagic Design PYXIS Monitor       Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5       Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to center        Works with any cheese plate or accessory with ARRI standard 3/8-16 holes       Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2ARRI M6 RosetteWorks with Z CAM 2.89" EVF101       Works with original PORTKEYS OEYESony / PortKeys 1/4-20   Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9       Works with Sony Burano EVF Pivot Adapter        Works with PORTKEYS LH7P (be careful, the monitor is plastic)       Works with PORTKEYS 5” BM5 IVL Bracket 1/4-20       Includes the slotted L Bracket with two 1/4-20 screws       Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions       Works with original RED DSMC1 EVFFemale ARRI 1/4-20        Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16      Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  1/4-20 Rosette      Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder       Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF       This is NOT a regular ARRI rosette    Old-Style SmallHD 1/4-20       Older style SmallHD 1/4-20 with wide locating tabs       Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5        Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7  ARRI Viewfinder Wedge      Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2      Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.      Works with 3rd party products that utilize ARRI-style mounting wedges.   Blackmagic Viewfinder Wedge        Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges        Works with URSA Cine EVF - CINEURSAB/EVF       Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT       Works with PYXIS Monitor Kit - CINEURSABB/AMKIT   Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)       Standard receptacle for 2-prong action camera feet       Works with GoPro, DJI Osmo Action, Insta360       Works with many other 3rd party action camera products  Sony FX6      Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained   Male Hot Shoe      Clamps to standard camera shoe mounts   Female Hot Shoe      Female shoe receptacle for standard shoe accessories    NATO Rail       Standard NATO rail with safety pins on each end       Mounting area between pins is 30mm  NATO Clamp       Standard NATO clamp with ratcheting thumbscrew       Clamping area between outside edges 21mm     Tripod Expansion Adapter        Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount      Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available

MID49 TWIST Ball Monitor MountTWIST Ball Monitor Mount is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3, 6, and 9-inch arm kits include the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Choose your SpudsNo SpudA 15mm friction hole with no mounting spudARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center       Second set of holes for 3mm pins 15mm center to center       Works with any cheese plate or accessory with ARRI standard 1/4-20 holes       Works with Blackmagic Design PYXIS Monitor       Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5       Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to center        Works with any cheese plate or accessory with ARRI standard 3/8-16 holes       Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2ARRI M6 RosetteWorks with Z CAM 2.89" EVF101       Works with original PORTKEYS OEYESony / PortKeys 1/4-20   Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9       Works with Sony Burano EVF Pivot Adapter        Works with PORTKEYS LH7P (be careful, the monitor is plastic)       Works with PORTKEYS 5” BM5 IVL Bracket 1/4-20       Includes the slotted L Bracket with two 1/4-20 screws       Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions       Works with original RED DSMC1 EVFFemale ARRI 1/4-20        Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16      Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  1/4-20 Rosette      Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder       Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF       This is NOT a regular ARRI rosette    Old-Style SmallHD 1/4-20       Older style SmallHD 1/4-20 with wide locating tabs       Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5        Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7  ARRI Viewfinder Wedge      Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2      Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.      Works with 3rd party products that utilize ARRI-style mounting wedges.   Blackmagic Viewfinder Wedge        Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges        Works with URSA Cine EVF - CINEURSAB/EVF       Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT       Works with PYXIS Monitor Kit - CINEURSABB/AMKIT   Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)       Standard receptacle for 2-prong action camera feet       Works with GoPro, DJI Osmo Action, Insta360       Works with many other 3rd party action camera products  Sony FX6      Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained   Male Hot Shoe      Clamps to standard camera shoe mounts   Female Hot Shoe      Female shoe receptacle for standard shoe accessories    NATO Rail       Standard NATO rail with safety pins on each end       Mounting area between pins is 30mm  NATO Clamp       Standard NATO clamp with ratcheting thumbscrew       Clamping area between outside edges 21mm     Tripod Expansion Adapter        Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount      Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available

MID49 TWIST Ball Monitor MountTWIST Ball Monitor Mount is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3, 6, and 9-inch arm kits include the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Choose your SpudsNo SpudA 15mm friction hole with no mounting spudARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center       Second set of holes for 3mm pins 15mm center to center       Works with any cheese plate or accessory with ARRI standard 1/4-20 holes       Works with Blackmagic Design PYXIS Monitor       Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5       Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to center        Works with any cheese plate or accessory with ARRI standard 3/8-16 holes       Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2ARRI M6 RosetteWorks with Z CAM 2.89" EVF101       Works with original PORTKEYS OEYESony / PortKeys 1/4-20   Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9       Works with Sony Burano EVF Pivot Adapter        Works with PORTKEYS LH7P (be careful, the monitor is plastic)       Works with PORTKEYS 5” BM5 IVL Bracket 1/4-20       Includes the slotted L Bracket with two 1/4-20 screws       Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions       Works with original RED DSMC1 EVFFemale ARRI 1/4-20        Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16      Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  1/4-20 Rosette      Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder       Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF       This is NOT a regular ARRI rosette    Old-Style SmallHD 1/4-20       Older style SmallHD 1/4-20 with wide locating tabs       Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5        Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7  ARRI Viewfinder Wedge      Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2      Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.      Works with 3rd party products that utilize ARRI-style mounting wedges.   Blackmagic Viewfinder Wedge        Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges        Works with URSA Cine EVF - CINEURSAB/EVF       Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT       Works with PYXIS Monitor Kit - CINEURSABB/AMKIT   Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)       Standard receptacle for 2-prong action camera feet       Works with GoPro, DJI Osmo Action, Insta360       Works with many other 3rd party action camera products  Sony FX6      Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained   Male Hot Shoe      Clamps to standard camera shoe mounts   Female Hot Shoe      Female shoe receptacle for standard shoe accessories    NATO Rail       Standard NATO rail with safety pins on each end       Mounting area between pins is 30mm  NATO Clamp       Standard NATO clamp with ratcheting thumbscrew       Clamping area between outside edges 21mm     Tripod Expansion Adapter        Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount      Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available

MID49 TWIST Ball Monitor Mount with ARRI 1/4-20 + ARRI 3/8-16 SpudsSKU: M49-TWB-ARM0-A142-A38 TWIST Ball Monitor Mount with ARRI 1/4-20 + ARRI 3/8-16 Spuds is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew.Included in this kit is one ARRI 1/4-20, which has removable 3mm locating pins in 10.4mm spacing from center to center. Pins can also be installed with 15mm spacing which can be found on some random, 3rd party products.Also included is one ARRI 3/8-16, which has removable 3mm locating pins in 15mm spacing, center to center. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.ARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to centerSecond set of holes for 3mm pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 1/4-20 holesWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to centerWorks with any cheese plate or accessory with ARRI standard 3/8-16 holesWorks with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)

MID49 TWIST Ball Monitor MountTWIST Ball Monitor Mount is an articulating arm with interchangeable mounting spuds that utilize a variable friction 15mm clamp. With the variable friction design, you can grab and twist the arm or monitor without loosening a thumbscrew. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then slip the TWIST Balls into place and lock the thumbscrews.The Speedball Clamp's "Chip Clip" design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3, 6, and 9-inch arm kits include the Speedball Extension, a second Speedball Clamp, and a hook and loop cable tie. TWIST Ball components are compatible with our Universal Speedball and any other brand of 1-inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Choose your SpudsNo SpudA 15mm friction hole with no mounting spudARRI 1/4-20ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center       Second set of holes for 3mm pins 15mm center to center       Works with any cheese plate or accessory with ARRI standard 1/4-20 holes       Works with Blackmagic Design PYXIS Monitor       Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5       Works with ARRI Camera Control Monitor CCM-1ARRI 3/8-16ARRI 3/8-16 with removable 3mm locating pins 15mm center to center        Works with any cheese plate or accessory with ARRI standard 3/8-16 holes       Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)Canon C400, C300mkIII, C500mkII, LM-V2Works with Canon C400, C300mkIII, C500mkII, and LM-V2ARRI M6 RosetteWorks with Z CAM 2.89" EVF101       Works with original PORTKEYS OEYESony / PortKeys 1/4-20   Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9       Works with Sony Burano EVF Pivot Adapter        Works with PORTKEYS LH7P (be careful, the monitor is plastic)       Works with PORTKEYS 5” BM5 IVL Bracket 1/4-20       Includes the slotted L Bracket with two 1/4-20 screws       Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions       Works with original RED DSMC1 EVFFemale ARRI 1/4-20        Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16      Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  1/4-20 Rosette      Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder       Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF       This is NOT a regular ARRI rosette    Old-Style SmallHD 1/4-20       Older style SmallHD 1/4-20 with wide locating tabs       Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5        Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7  ARRI Viewfinder Wedge      Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2      Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.      Works with 3rd party products that utilize ARRI-style mounting wedges.   Blackmagic Viewfinder Wedge        Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges        Works with URSA Cine EVF - CINEURSAB/EVF       Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT       Works with PYXIS Monitor Kit - CINEURSABB/AMKIT   Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360)       Standard receptacle for 2-prong action camera feet       Works with GoPro, DJI Osmo Action, Insta360       Works with many other 3rd party action camera products  Sony FX6      Attaches to the FX6 monitor to provide a rigid "flop stop" mount = Monitor folding capability is maintained   Male Hot Shoe      Clamps to standard camera shoe mounts   Female Hot Shoe      Female shoe receptacle for standard shoe accessories    NATO Rail       Standard NATO rail with safety pins on each end       Mounting area between pins is 30mm  NATO Clamp       Standard NATO clamp with ratcheting thumbscrew       Clamping area between outside edges 21mm     Tripod Expansion Adapter        Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount      Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available