LIBEC DL-10RB LIBEC DL-10RB is a Dolly with cable guard and trakcing lock designed for studio use. Technical data Weight: 8.6kgFolded length: 700mmPipe size: 38 mm x 38mmRadius: 630mm List of models for DL-10RB Dollies Libec T102B T103B T103C T150B T150C Vinten 3819-3 V3822-0001 3766-3 3821-3 3772-3 3773-3 3884-3 Sachtler CF100 CF100L Speed Lock CF Speed Lock CF HD DA150M EFP 2 CF

LIBEC H35 The LIBEC H35 is ideal for camera configurations weighing up to 8kg, such as handheld camcorders with accessories, or large sensor cameras. The included Long Plate S is handy for front to rear camera balance setups using rigs and telephoto lenses. Equipped with a counterbalance meter with the measurement range of 0 to 100. This allows users to glance at the head's minimum/maximum inner spring strength, making camera balances on site a piece of cake. Dual-head specification is available for both 75mm bowl and flat base tripods. The Dual-head is also compatible with sliders, skater dollies, and photo tripods. Features Stepless counterbalance with illuminated scalePivot resistance modes: Free and 3 levelsTilt Resistance Modes: Free and 3 levelsResistance System Multi-layer metal constructionSpirit level illuminatedCamera plate: Quick release plateCompatible with: Manfrotto and Sachtler headsLong quick release plate included Technical data Counterweight range: 3 to 7,5kg (C.G.55mm)Load capacity: 8kgCounterweight: Perfect balanceTilt angle: +90° / -70Temperature range: -40°C to +60°CAdjustment range: +/-30mmHalf shell: 75mm Half shell / Flat basePlate mounting: 1/4" screw with video pinAccessories: 1/4" and 3/8" screw holesSpare: 1/4" and 3/8" screwsWeight: 2,8kg

LIBEC H45 The LIBEC H45 is ideal for camera configurations weighing up to 12kg, such as large sensor cameras with various accessories and small-sized shoulder cameras. The Long Plate S, included in the kit, is handy for front to rear camera balance setups within its counterbalance range. Features Stepless counterbalance with illuminated scalePivot resistance modes: Free and 3 levelsTilt Resistance Modes: Free and 3 levelsResistance System Multi-layer metal constructionSpirit level illuminatedCamera plate: Quick release plateCompatible with: Manfrotto and Sachtler headsLong quick release plate included Technical data Counterweight range: 4,5 to 10,5kg (C.G.55mm)Load capacity: 12kgCounterweight: Perfect balanceTilt angle: +90° / -70Temperature range: -40°C to +60°CAdjustment range: +/-30mmHalf shell: 75mm Half shell / Flat basePlate mounting: 1/4" screw with video pinAccessories: 1/4" and 3/8" screw holesSpare: 1/4" and 3/8" screwsWeight: 2,8kg

Libec LX-ePed 2 Electric pedestal for PTZ camerasThe Libec LX-ePed 2 is a motorized base specifically designed for PTZ cameras. The tripod is equipped with a motorized center column and remote control for easy height adjustment and offers a load capacity of up to 10 kg. The base is equipped with a bottom spacer (max. height 250 cm). This patented product line is the world's first electric line of PTZ camera bases and is used in all types of PTZ filming in broadcast and production. This new Libec LX-ePed successor model now includes position presets, supports IP connectivity and serial communication when combined with the new optional multi-protocol converter"MPC-1". With it, the LX-ePed 2 can be controlled by PTZ controllers and the original PC application, the LX-ePed PC APP, which offers various optional settings.Smart quick release adapterIncluded in the package is a smart quick release adapter "AP-X" that allows you to attach/detach your camera more securely, easily and quickly. To prevent the attached PTZ camera from falling, the adapter is equipped with a hole for attaching a safety ropeIP connection and serial communicationUsing the optional multi-protocol converter "MPC-1", the new LX-ePed 2 and LX-ePed 2 Studio models can work with PTZ controllers and the original LX-ePed PC APP, allowing for precise setup. This unique feature enhances the accessibility of the electric pedestalRemote controlThe new remote control can store up to three preset positions, making it easy to adjust the height. The remote control adds a lifting element to the pan, tilt and zoom functions. This will provide multiple "viewing angles" and make setup easierSmooth and precise movementsThe original column mechanism minimizes wobble and spin when the base moves up/down. In addition, the column is mechanically controlled with precision, allowing for smooth starting and stopping movements, making these electric bases ideal for "on shot" scenesContinuous speed adjustmentThe speed of the top column can be adjusted by tilting the control lever. Slow motion mode allows fine tuning of the settingsHighly reliable cable connection systemThe LX-ePed 2 does not use Wi-Fi or Bluetooth, allowing users to focus on shooting without worrying about interference from radio waves. In addition, the controller is powered through the main part of the electrical base, so no additional power source or charger is neededCompatible with flat base with 1/4" and 3/8" screw holesIncludes "AP-X" adapter with 1/4" screw and "BL-F" adapter with 3/8" screw. These adapters support not only PTZ cameras, but also a wide range of devices equipped with 1/4" or 3/8" threads, which can now be mounted on the LX-ePed 2 and LX-ePed 2 StudioCompatibility with video headsBy removing the "BL-F" adapter component, a video head with a 100mm ball base can be mounted on the LX-ePed 2 and LX-ePed 2 Studio. In addition, by using the optional "AD-75" adapter, a video head with a 75mm ball base can also be mountedCompact designThe main unit can be separated from the strut for easy transportation, with all components being collapsible. This compact unit can be stored in the optional RC-80 tripod caseHigh angle shotsDynamic high angle shots can be achieved with a maximum height of 250 cmUser friendly port for accessoriesThe accessory port, which has a 1/4" and 3/8" screw hole, is located on two of the three sides of the tripod baseSafety designWith safety in mind, the power pole is carefully designed to prevent users from injuring their fingersBuilt-in spirit levelFor easy adjustment, a spirit level is built into the base of the head mounting platformTechnical dataLoad capacity: 10 kgElevation: 400 mmLifting/lowering speed: Approximately 14 to 40 seconds/movementContinuous operation time: 3 minutesLAN cable for controller: 30 mPower cable: 3 mPower supply: AC 100V～240VOperating temperature: -10°C to 40°COperating humidity: 0% to 90%Battery power supply: optional (V-Mount)Camera mounting: 1/4" screw + video pinHead attachment: 100mm / 75mm hemisphere (optional)Accessory attachment: 1/4" and 3/8" x 2 screw holesWeight: 11.9 kgHeight: 98.5 to 250 cmSection: 2-stage

Libec LX-ePed 2 Electric pedestal for PTZ camerasThe Libec LX-ePed 2 is a motorized base specifically designed for PTZ cameras. The tripod is equipped with a motorized center column and remote control for easy height adjustment and offers a load capacity of up to 10 kg. The base is equipped with a bottom spacer (max. height 250 cm). This patented product line is the world's first electric line of PTZ camera bases and is used in all types of PTZ filming in broadcast and production. This new Libec LX-ePed successor model now includes position presets, supports IP connectivity and serial communication when combined with the new optional multi-protocol converter"MPC-1". With it, the LX-ePed 2 can be controlled by PTZ controllers and the original PC application, the LX-ePed PC APP, which offers various optional settings.Smart quick release adapterIncluded in the package is a smart quick release adapter "AP-X" that allows you to attach/detach your camera more securely, easily and quickly. To prevent the attached PTZ camera from falling, the adapter is equipped with a hole for attaching a safety ropeIP connection and serial communicationUsing the optional multi-protocol converter "MPC-1", the new LX-ePed 2 and LX-ePed 2 Studio models can work with PTZ controllers and the original LX-ePed PC APP, allowing for precise setup. This unique feature enhances the accessibility of the electric pedestalRemote controlThe new remote control can store up to three preset positions, making it easy to adjust the height. The remote control adds a lifting element to the pan, tilt and zoom functions. This will provide multiple "viewing angles" and make setup easierSmooth and precise movementsThe original column mechanism minimizes wobble and spin when the base moves up/down. In addition, the column is mechanically controlled with precision, allowing for smooth starting and stopping movements, making these electric bases ideal for "on shot" scenesContinuous speed adjustmentThe speed of the top column can be adjusted by tilting the control lever. Slow motion mode allows fine tuning of the settingsHighly reliable cable connection systemThe LX-ePed 2 does not use Wi-Fi or Bluetooth, allowing users to focus on shooting without worrying about interference from radio waves. In addition, the controller is powered through the main part of the electrical base, so no additional power source or charger is neededCompatible with flat base with 1/4" and 3/8" screw holesIncludes "AP-X" adapter with 1/4" screw and "BL-F" adapter with 3/8" screw. These adapters support not only PTZ cameras, but also a wide range of devices equipped with 1/4" or 3/8" threads, which can now be mounted on the LX-ePed 2 and LX-ePed 2 StudioCompatibility with video headsBy removing the "BL-F" adapter component, a video head with a 100mm ball base can be mounted on the LX-ePed 2 and LX-ePed 2 Studio. In addition, by using the optional "AD-75" adapter, a video head with a 75mm ball base can also be mountedCompact designThe main unit can be separated from the strut for easy transportation, with all components being collapsible. This compact unit can be stored in the optional RC-80 tripod caseHigh angle shotsDynamic high angle shots can be achieved with a maximum height of 250 cmUser friendly port for accessoriesThe accessory port, which has a 1/4" and 3/8" screw hole, is located on two of the three sides of the tripod baseSafety designWith safety in mind, the power pole is carefully designed to prevent users from injuring their fingersBuilt-in spirit levelFor easy adjustment, a spirit level is built into the base of the head mounting platformTechnical dataLoad capacity: 10 kgElevation: 400 mmLifting/lowering speed: Approximately 14 to 40 seconds/movementContinuous operation time: 3 minutesLAN cable for controller: 30 mPower cable: 3 mPower supply: AC 100V～240VOperating temperature: -10°C to 40°COperating humidity: 0% to 90%Battery power supply: optional (V-Mount)Camera mounting: 1/4" screw + video pinHead attachment: 100mm / 75mm hemisphere (optional)Accessory attachment: 1/4" and 3/8" x 2 screw holesWeight: 11.9 kgHeight: 98.5 to 250 cmSection: 2-stage

Libec LX10The Libec LX Series is a new line of video stats that builds on the popularity and popular features of the previous LS Series.The new LX Series has been created by reworking the most basic features and introduces a completely new tripod that has a number of useful improvements.The main changes to the LX10 Series are the 100mm hemisphere, adjustable head stiffness and more massive tripod legs.Features of the LX10 seriesTighten every movement from start to finish thanks to the perfect gear mechanismExcellent rigidity and load-bearing capacity thanks to sophisticated aluminium tripod legs = Fluid head with improved performance, handling and adjustable stiffnessHigh-quality bottom strut (LX10) or middle strut and removable large rubber feet (LX10M) or adjustable twin spokes and wheeled base (LX10 Studio) supplied as standard50mm sliding dock and spare 3/8" screw includedFlexible head, adjustable counterbalance and light weight of the complete tripodThree different kits for the same priceThe fixed counterbalance guarantees the same head resistance when working and thanks to the sophisticated design, the LX10 tripod has very similar characteristics even in different temperatures or outdoors/indoors. The tripod's load capacity makes it ideal for a large number of smaller handycam HDV, XDCAM EX, P2 or AVCHD cameras. The Libec LX10 is a fully featured tripod leg and video head set that offers videographers and documentarians similar control to higher-end pro video tripods, but at a more affordable price. In addition, the LX10 Studio version is designed for studio use and thanks to two adjustable handles, lens controls (zoom, focus,...) can be attached to the tripod. A wheeled base is also standard on this version for convenient moving of a fully loaded tripod.Technical dataLoad capacity:up to 16kgInclination:+85° / -65°Balancing:fixedStiffness:2 degreesCamera mount:quick release plate, 3/8" threadPlate:sliding plate, ±50mmWeight:7.6kg / 7.4kg for the M version / 10.6kg for the Studio versionHeight: 63cm to 173.5cm / 83cm to 171.5cm for M version / 91.5cm to 187cm for Studio versionHemispherical diameter:100mmSections:2 The Libec LX10 tripod comes in three setsLX10includes: 1x LX10 head, 1x RT50B legs, 1x PH-8B handle, 1x SP-2B bottom spacer, 1x RC-50 bagLX10Mincludes: 1x LX10 head, 1x RT50B legs, 1x PH-8B handle, 1x BR-6B middle strut, 1x set of FP-2B rubber feet, 1x RC-50 bagLX10 Studioincludes: 1x LX10 head, 1x RT50B legs, 2x PH-8B handle, 1x DL-3B wheeled base

Libec LX7 M System with mid-level spreader Die Libec LX Serie besticht durch ihr hervorragendes Preis-Leistungs-Verhältnis. Ausgezeichnete Verarbeitung und Standfestigkeit ermöglichen eine Nutzlast von bis zu 10,6 kg. Das komplett überarbeitete Tripod-Design ist robust und macht doch jede Bewegung geschmeidig mit. System components 1 x Head: LX7 Head1 x Tripod: RT30B1 x Spreader: BR-2B1 x Large rubber feet: FP-2B1 x Case: TC-70 System technical data Payload 8 kgCounterbalance FIXDrag mode FIXTilt angle+90° -80°Temperature range -20°C to +60°CBubble leve lNon illuminatedCamera plate Sliding plateSliding range +/- 40 mmPlate attachmen t1/4" screw with video pinSpare screw 3/8" screwWeight 5.2 kgHeight 81 cm to 165.5 cmBall diameter 75 mmSection 2 STAGE

LIBEC QD-30M The QD Series redefines the Price Quality Relationship in this price range, bringing a new balance between price, payload, and performance.The QD-10 Tripod System features a Head with center tilt lock, a counterbalance meter, a smooth counterbalance system and a flat base & 150mm ball. The Smooth Counterbalance System is a unique Libec technology that allows the counterbalance knob to be adjusted with constant motion to smoothly reach the minimum and maximum power range. The foldaway knob is designed for easy speedy adjustments. The counterbalance power level kan be easily viewed by looking at the meter. For the cameras system´s safety, the head can be phsyically locked into a center tilt poition with help of the Center Tilt Lock. Even at a distance, the arrow shaped knob and Lock/Unlock symbols are visible. The BL-150 ball base adapter is included inside this kit, which converts the flat base head into a 150mm ball head. The Pedestal features the tracking locking mechanism and cable guards which come standard with the large-sized double-wheel 125mm / 4.9" casters. The tracking locking mechanism ensures straight-line movement by locking the caster direction, while the cable guards prevent the wheels from running over the cable during studio production. The gas spring inside the pedestal supports the mid column´s elevation, allowing safe and easy height adjustments and setups with heavy equipment. It can also be easily disassembled into the pedestal column, the steering handle and the Dolly. This makes it easy to transport within studios and outsite broadcast sites. The air pressure can be easily checked with the air pressure meter. It´s Flat Base is not only compatible with Libec heads but other brand heads as well. With optional accessories, ball based heads can also be attached on this pedestal. The upper column friction can be adjusted to preferred setting with the drag knob. Head Smooth Counterbalance SystemCounterbalance MeterCenter Tilt Lock for high safetyFlat Base and 150mm Ball Pedestal Flat base with high compatibilityEasy-read air pressure gaugeDetachable steering handleUpper column with perfect balance featureDrag knob for upper columnMid column with gas spring assistHigh performance casters with track lock mechanism Tripod 1/4" and 3/8" screw holes for accessoriesNew leg lock knob design In the box 1x Head (LIQH3)1x Tripod (LIT150B)1x Spreader (LIBR-6B)1x Large Rubber Feet (LIFP-6B)

LIBEC QD-30PD The QD Series redefines the Price Quality Relationship in this price range, bringing a new balance between price, payload, and performance. The P1000 is equipped with the tracking locking mechanism and cable guards which come standard with the large-sized double-wheel 125mm / 4.9" casters. The tracking locking mechanism ensures straight-line movement by locking the caster direction, while the cable guards prevent the wheels from running over the cable during studio production. The gas spring inside the P1000 pedestal supports the mid column´s elevation, allowing safe and easy height adjustments and setups with heavy equipment. It can also be easily disassembled into the P1000 column, the steering handle and the Dolly. This makes it easy to transport within studios and outsite broadcast sites. The air pressure can be easily checked with the air pressure meter. The P1000 Flat Base is not only compatible with Libec heads but other brand heads as well. With optional accessories, ball based heads can also be attached on this pedestal. The upper column friction can be adjusted to preferred setting with the drag knob. Head Smooth Counterbalance SystemCounterbalance MeterCenter Tilt Lock for high safetyFlat Base and 150mm Ball P1000 Upper Column with Perfect BalanceMid Column with Gas Spring Assist for safe and easy height adjustmentsRemovable structure for easy transportationHigh Performance Casters with Track Lock MechanismEasy-Read air pressure meterFlat base with high compatibilityDrag knob for upper columnDetachable steering handleEquipped with a Standard Air Pump Technical data Weight: 39kg Height: 91,5 - 173cm Payload: 47kg In the box 1x Pedestal (LIP1000)1x Head (LIQH-3)

Libec QL40BThe locking mechanism of the QL40B tripod allows users to conveniently adjust the height using the leg locks located at the top of the tripod. The flip-type Quick Lock shape is ergonomically designed, making it easy to grasp with fingers from both the bottom and sides. This allows for quick and easy installation.Easy maintenanceWith the included special screwdriver, users can easily adjust the tripod lock strength. Compared to conventional Quick Lock tripods, the QL40B is designed to maintain the lock strength for a much longer period of timeComfortable handleA handle is included to make it easy to carry. The handle can be easily removed when not in useLightweight designDespite being a long aluminum tripod, the QL40B weighs only 2.6 kg. When using the carry handle, it feels much lighter than the previous RT30B model40 kg load capacityThe QL40B has a load capacity of 40 kg, providing a higher capacity than other quick release tripods. It can safely carry heavier camera systems without any problemsTripod lengthThe maximum height of the QL40B is approximately 30 cm higher than the current RT30B tripod with a 75mm base. With the video head and bottom strut, this tripod can reach a height of up to 198 cm. Since the camera lens can easily exceed 200 cm in height, high angle shots can be achieved without the need for additional accessoriesSmooth extensionWhen the Quick Lock is released, the legs extend smoothly without resistance, allowing the tripod to be mounted quickly and smoothlyUser-friendly port for accessoriesA 1/4" and 3/8" threaded accessory port is located on three sides of the tripod base, providing a convenient way to securely mount accessories such as monitors and lightsSafety designWith safety in mind, the tripod legs are carefully designed to prevent users from getting their fingers pinched when intentionally or unintentionally folding the tripod

Libec TH-650EX The Libec TH-650EX is a compact all-in-one tripod system with new features such as a sliding plate that is compatible with Libec TH-X as well as Sachtler and Manfrotto tripod heads. With a payload of 3kg and a fixed counterbalance, the TH-650EX is ideal for use with the latest smaller DV and HD camcorders or DSLR or mirrorless cameras. HeadPayload: 3gCounterbalance: FIXTilt angle range: +90° to -70°Temperature range: -20C° to + 60C°Spirit level: not illuminatedQuick release plate: standardSliding Range: +/- 50mmPlate Mounting: 1/4" scrweDead weight: 3.2kgTripodWeight: 3.3kgHeight: 70-150cmBallhead: 65mmLeg extension: double

Libec TH-V Libec TH-V tripod system for mirrorless, DSLR and camcorders with mid-level spreader and 75mm dual head tripod headThe long-awaited advanced model of the TH series has finally arrived. While maintaining the core concept of the TH series (lightweight, compact, and affordable), the new TH-V tripod system features new continuous friction control for pan and tilt functions. With this added application, users are able to achieve footage at a higher level.The TH-V is equipped with friction control knobs that adjusts the pan and tilt drag settings. The sliding plate can be attached and released with just one-touch. Quick and easy setups in the field are easily achieved. The Dual-head base specification allows for a quick set-up with both 75mm bowl and flat base tripods. The Dual-head base is also compatible with sliders, skater dollies, and photo tripods. The bubble level is equipped with an LED light allowing users to level a tripod head in the dark.Sliding plate is compatible with Libec's 650EX, TH-M, TH-X, TH-Z, NX Series and HS Series. This industry standard sliding plate is also compatible with other brand tripod systems and accessories, allowing users to quickly swap between a wide range of camera supports. The improved foot rubbers will support the tripod more firmly on various surfaces while allowing steady camerawork without slippage. Widening the mid-spreader can make the system even more stable. Designed with a weight hook near the center of the tripod to increase stability and prevent tumbling during extreme weather conditions. Technical data Payload: 5kgCounterbalance: FIXDrag Mode: Continious Friction ControlTilt angle: +90°/-80°Temperature range: -20°C to + 60°CBubble Level: IlluminatedCamera plate: Sliding plate (compatible with Manfrotto and Sachtler heads)Sliding Range: +/-30mmHead Base: 75mm ball / Flat basePlate attachment: 1/4" screw with video pinWeight: 3.6kgHeight: 73cm to 163cmSection: 2-Stage In the box1 x TH-VH Videohead1 x TH-ZT Tripod1 x RC-10 Tripod bag

LIBEC VM-12V LIBEC VM-12V is a V-mount adapter with connector for powering Libec LX-ePed and LX-ePed Studio electric pedestals. By using the optional "VM-12V", the LX-ePed can be powered by any V-mount battery. This allows the pedestal system to be operated at any location.

OConnor Cine HD 150mm C1221-0003 The OConnor CINE HD tripod is the perfect choice for heavy payloads that must be supported in a safe and reliable manner. C1221-0003 Technical data Model CINE HDMaterial AluminiumCapacity 140 kgWeight 13.3 kg (with Spreader)Maximum Height 175.8 cmMinimum Height 85.3 cmTop Casting Mitchell or 150 mmCollapsed Length 103 cmCollapsed Width 28.2 cm

OConnor Floor Spreader C1222-0015 For Cine HD Tripods

OConnor Front End Handle 08409 For 2065, 2575 & 120EX

OConnor Ultimate 1040 flowtech100-System SKU: C1040-FT100 The Oconnor Ultimate 1040 flowtech100 system brings together the precision ultra-smooth fluid camera movement that has made OConnor heads the cinematography industry standard together with the award-winning speed, agility and stability of the flowtech tripod system. The unique OConnor edition of the carbon fibre flowtech 100 tripod provides camera operators with an incredibly fast, lightweight and easy-to-setup camera support with revolutionary quick release brakes and rubber feet for speed with stability. The tripod is perfectly complemented by the Ultimate 1040 fluid head that delivers a continuous, ultra-smooth pan and tilt fluid drag system for ultimate control and stability together with OConnor’s unrivalled Sinusoidal Counterbalance system for true, accurate balance at any point in the tilt range and counterbalance down to zero for perfect balance no matter the payload. Made with high-performance magnesium, and aluminium alloys with stainless steel and genuine carbon fibre finishing, the Ultimate 1040 head is built to deliver consistent results on the most demanding sets. One of the most versatile camera support systems available - able to support payloads from 0 to 20kg at 15cm centre of gravity and a +/- 90 tilt range - the Ultimate 1040 flowtech100 System is the perfect camera support system for cinematographers who need to move from heavier to lighter payload camera setups without compromise. System includes 1040 Fluid Head Package C1265-0001flowtech 100 Tripod & Feet C1266-0002Handle S2051-1061Case C1254-0001

OConnor Ultimate 1040 Fluid-Head SKU: C1265-0001 The Ultimate 1040 fluid head brings the same quality build and precision movement found the larger OConnor 2575 and 2560 heads to enable cinematographers easily move from heavier to lighter payload camera setups without compromise. Features of the lightweight yet sturdy fluid head include a stepless, ultra-smooth pan and tilt fluid drag custom designed to provide ultimate control and stability, as well as the OConnor Sinusoidal Counterbalance system that provides true, accurate balance at any point in the tilt range. Providing perfect balance even for lighter-weight cameras with counterbalancing down to zero, the Ultimate 1040 head is made with high-performance magnesium, and aluminium alloys with stainless steel and genuine carbon fibre finishing, to deliver consistent results on the most demanding sets. For camera operators, making the change to smaller, lighter cameras while retaining quality has never been easier. And most importantly, the famous OConnor feel, remains the same regardless of payload. The versatile OConnor Ultimate 1040 supports payloads from 0 to 20 kg at a 15cm centre of gravity and a +/-90° tilt range. Technical data Capacity @ 4 in. (102 mm) GoG: 23.5 kgCapacity @ 5 in. (127 mm) GoG: 20.4 kgCapacity @ 6 in. (152 mm) GoG: 18.1 kgCapacity @ 8 in. (203 mm) GoG: 14.5 kgPlatform: Large Europlate Quick ReleaseHandle(s): 30°Bases: 100mm (Mitchell, 150mm, Quickfix and Ped mounts optional)Tilt: +90° / -90°Height: 15.8cmWidth: 19.3 cmDepth: 11.7 cm excluding quick releaseWeight: 4.8 kg includes quick release & plate and tiedown but excluding Pan Bar In the box Large Euro Quick Release with Camera Plate 1030-268Pan handle for 1030 range 1030-246Pan handle extension 2575-135100mm Ball Base 08365100mm FT Tiedown S2052-1100

OConnor Ultimate 2560 Fluid Head C1260-0002 OConnor introduces the 2575’s baby brother…the OConnor Ultimate 2560. Perfectly suited to the adaptable, a la carte configurations of accessorised digital cinematography. Cameras such as the Alexa in portable configuration or any lightweight digital cinema camera (from Sony, Canon, ARRI, AJA, JVC, Panasonic, Vision Research, RED) in ‘maxed out’ studio configuration. OConnor Ultimate heads have been used on almost every Hollywood movie feature and episodic TV Drama since the early 1990’s and OConnor heads in general have been heavily utilised in the industry since 1949. Ultimate 2560 Fluid Head Technical data Model 2560Capacity @ 4 in. (102 mm) 83 lbs. (37.7 kg)@ 6 in. (152 mm) 65 lbs. (29.5 kg)@ 8 in. (203 mm) 53 lbs. (24.1 kg)Tilt +/- 90 degrees tiltHeight 20.3 cmWidth 28.7 cmDepth 19.1 cmWeight 7.3 kg

OConnor Ultimate 2560 Fluid Head Package C1260-0001 OConnor introduces the 2575’s baby brother…the OConnor Ultimate 2560. Perfectly suited to the adaptable, a la carte configurations of accessorised digital cinematography. Package includes Ultimate 2560 Fluid Head C1260-0002Euro Style Quick Release 2575-120Pan handle 2575-137Pan handle extension 2575-135Mitchell base & tiedown 08281 & 08402150mm Ball base & tiedown 08414 & 08417 Cameras such as the Alexa in portable configuration or any lightweight digital cinema camera (from Sony, Canon, ARRI, AJA, JVC, Panasonic, Vision Research, RED) in ‘maxed out’ studio configuration. OConnor Ultimate heads have been used on almost every Hollywood movie feature and episodic TV Drama since the early 1990’s and OConnor heads in general have been heavily utilised in the industry since 1949. Technical data Model 2560Capacity @ 4 in. (102 mm) 83 lbs. (37.7 kg)@ 6 in. (152 mm) 65 lbs. (29.5 kg)@ 8 in. (203 mm) 53 lbs. (24.1 kg)Tilt+/- 90 degrees tiltHeight 20.3 cmWidth 28.7 cmDepth 19.1 cmWeight 7.3 kg

Second Wave Dolly 1 The Second Wave Dolly, is a dolly for camera tripods. With this dolly you can realize camera movements in a professional way.With the Second Wave Dolly you can realize individual camera movements, whether straight or curved. The Second Wave - Dolly, is a perfect extension for the Second Wave - Model 13 or Model 20.

Second Wave Motorized Pedestal Model 30The Second Wave Pedestal features a triple column and, with its conventional legs, is lightweight compared to the competition. The remote control offers several storage options, so that preset positions can be directly approached. Switching from presenter A to presenter B is very simple. The motorized Second Wave Pedestal combines ease of use with efficiency.With a load capacity of 30 kg, it can easily carry a large Robo Prompter or any other teleprompter with camera. Gone are the days of tedious tripod changing. The motorized pedestal can be easily adjusted to the desired height via remote control. Especially in combination with a teleprompter, the advantages of the motorized pedestal become apparent. Here, the height comfortable for the speaker can be adjusted very comfortably and without compromises. The motorized pedestal will be a part of every studio prompter in the future.FeaturesAdjust the height effortlessly with the electric motor and remote control, without any jerking or judderingSupports up to 30 kg and is thus suitable for a wide range of cameras and equipmentContinuously adjustable from 82 cm to 260 cm. Adjustment height of the column on its own is 64cmLifting/lowering speed of 40 mm/s. The integrated spirit level ensures a straight and precise positioningIncludes a wired remote control with display and memory settings for 3 positions. A wireless control is also available as an optionEquipped with 1/4" and 3/8" screws, compatible with a variety of camera modelsDurably constructed with a noise level of ≤50 dB, ensuring minimal disturbances during recordingsLightweight (13-16 kg) and easy to transport, with a Mono-Lock system for quick adjustments and an adjustable central spider for maximum stability.PED-MOT - Scope of DeliveryMotorized tripodPower supplyPower cable (3m)Column motor cable (2.5m+2m)Wired remote control (2m)PED-MOT-D - Scope of DeliveryMotorized tripodPower supplyPower cable (3m)Column motor cable (2.5m+2m)Wired remote control (2m)Dolly

Second Wave Motorized Pedestal Model 30The Second Wave Pedestal features a triple column and, with its conventional legs, is lightweight compared to the competition. The remote control offers several storage options, so that preset positions can be directly approached. Switching from presenter A to presenter B is very simple. The motorized Second Wave Pedestal combines ease of use with efficiency.With a load capacity of 30 kg, it can easily carry a large Robo Prompter or any other teleprompter with camera. Gone are the days of tedious tripod changing. The motorized pedestal can be easily adjusted to the desired height via remote control. Especially in combination with a teleprompter, the advantages of the motorized pedestal become apparent. Here, the height comfortable for the speaker can be adjusted very comfortably and without compromises. The motorized pedestal will be a part of every studio prompter in the future.FeaturesAdjust the height effortlessly with the electric motor and remote control, without any jerking or judderingSupports up to 30 kg and is thus suitable for a wide range of cameras and equipmentContinuously adjustable from 82 cm to 260 cm. Adjustment height of the column on its own is 64cmLifting/lowering speed of 40 mm/s. The integrated spirit level ensures a straight and precise positioningIncludes a wired remote control with display and memory settings for 3 positions. A wireless control is also available as an optionEquipped with 1/4" and 3/8" screws, compatible with a variety of camera modelsDurably constructed with a noise level of ≤50 dB, ensuring minimal disturbances during recordingsLightweight (13-16 kg) and easy to transport, with a Mono-Lock system for quick adjustments and an adjustable central spider for maximum stability.PED-MOT - Scope of DeliveryMotorized tripodPower supplyPower cable (3m)Column motor cable (2.5m+2m)Wired remote control (2m)PED-MOT-D - Scope of DeliveryMotorized tripodPower supplyPower cable (3m)Column motor cable (2.5m+2m)Wired remote control (2m)Dolly

Second Wave Pedestal Pro Model 15 Pedestal Pro Model 15 enables camera movements in the studio. The Second Wave Pedestal Heavy Duty also allows height adjustment of the camera units. The Pedestal HD allows the use with teleprompter and accessories. Second Wave Pedestal Pro is composed of 3 parts: The video head the Pedestal tripod / column and the dolly The components in detail Video head The fluid head used is robust, durable and lightweight. It works with a counterweight adjustment and 60 mm sliding plates. The head comes with a large studio-style quick-release mounting plate that makes it easy to balance large studio cameras or teleprompters. It features two rosettes to which you can attach the two included GB3 padded swivel handles. Pedestal tripod / column The tripod legs feature a flip-lock leg design and an adjustment lever that lets you quickly adjust the height of the tripod from 120 to 200 cm. The "Air-Assist" center column has a damping function that makes moving heavy loads easier, and the entire system fits into the included Oscar T30 bag. Dolly The dolly has three lockable rubber wheels, a load capacity of 100kg and a standing surface diameter of 102cm, and can be detached from the legs and folded for transport and storage. Net weight: 6.8kg Data: Load capacity: up to 15kg Counterbalance: 0-8 levels half shell: 100mm lowest height with dolly is approx. 120 cm with extended tripod and column 2 m