Core SWX Coiled D-Tap to 2-Pin Cable for Blackmagic Pocket 4K SKU: PTC-BMPC4 Core SWX PTC-BMPC4 is a Coiled P-Tap Cable to 2 Pin Connector for Blackmagic Design Pocket 4K. The cable extends from 18 to 48" in total length, providing the flexibility to use it on different parts of your camera rig. Input: DC 11-28vOutput: UnregulatedContracted Length: 18″Expanded Length: 48″

Core SWX Core-SumoVSKU: SUMOV Core SWX Core-SumoV is a Double V-mount kit with coiled powertap to 12″ XLR 4-pin for Atomos Sumo Input: DC 11-17vOutput for Monitor: DC 11-17v, Unregulated 4-Pin XLR FemaleOutput for P-tap: DC 11-17v, UnregulatedSize: 8,25 cm x  13,97 cm x 1,27 cmWeight: 0,18 kg

Core SWX Cube 200 200W Industrial AC Power Supply SKU: CUBE-200 The Core Cube is a lightweight, all aluminum 200w industrial power supply capable of powering the most power hungry cameras. The “Cube 200” is so compact, it fits in the palm of your hand, perfect for “Run and Gun” productions. Two XLR outputs provide up to 200w combined. The power supply has internal protections to protect the device against accidental misuse, shutting down and the resetting to operational status. AC input accepts 100-240VAC, making it useable worldwide. Includes an AC power cord. The Core SWX Cube 200 is fanless, and operates silently. SPECS Input Voltage: AC 100-240V 50/60Hz DC Output: 200W max(14.3v) Protection: Over Current, and Temperature Dimensions: 4.8″ x 3.3″ x 3.7″ Weight: 1.4lbs.

Core SWX Cube Plus XLR V-mt Core’s Cube Plus DC is a lightweight, all aluminum on-board power module capable of powering a camera or device, while simultaneously charging an on-board battery pack up to 3A per hour(~2hrs to fully charge a 98wh pack). The Cube Plus DC, when having an on-board pack mounted, is designed to act like an uninterruptable power source should DC input power be disconnected. Not only will the device switch from the DC power source to on-board power for the camera or device, but the two ptap connections are also backed up. The unit has a 4pin XLR DC input to accept 12 to 34 volts, providing you the flexibility of using various outputs from your block battery style, like Core’s Maverick MV6, or a AC to DC power supply. The Cube Plus DC has internal protections along with a replaceable 15A fuse. Features Lightweight, all aluminum on-board power moduleMounts on to a camera or device like a battery pack2x ptaps to power accessories(powered by both power supply or on-board battery)Acts like a UPS if DC Input is disconnected(as long as an on-board battery is mounted)Simultaneous charges a battery pack while powering a camera/device*Red and green status LEDs for charge and power to camera/deviceAll Aluminum design12-30v DC input voltageFanless and operates silentlyDC Output: up to 200w(dependent upon DC input power source)Quick Charge Current: up to 3A*Protection: Over Current, Voltage & TemperatureDimensions: 121,9 mm x 94 mm x 83,8 mmWeight: 544 gInput Voltage: DC 12-34v

Core SWX CUBE-PLV Core’s Cube Plus is a lightweight, all aluminum 120w on-board power supply capable of powering a camera or device, while simultaneously charging an on-board battery pack up to 3A (depending on the power supply load, charge speed may reduce) per hour(~2hrs to fully charge a 98wh pack). The Cube Plus, when having an on-board pack mounted, is designed to act like an uninterruptable power source should AC mains power be disconnected. Not only will the device switch from AC to on-board power for the camera or device, but the two p-tap connections are also backed up. The Core SWX Cube Plus has internal protections along with a replaceable 10A fuse. It accepts 100-240VAC, making it useable worldwide and it includes an AC power cord. Furthermore, it’s fan-less, and operates silently. Features Lightweight, all aluminium 120w on-board power supplyMounts on to a camera or device like a battery pack2x ptaps to power accessories(powered by both power supply or on-board battery)Acts like a UPS if AC mains is disconnected(as long as an on-board battery is mounted)Simultaneous charges a battery pack while powering a camera/device*Red and green status LEDs for charge and power to camera/deviceAll Aluminium design90-240 VAC worldwide compatible input voltageFanless and operates silently Technical data DC Output: 120W max(14.3v) to camera mains connection and 2x ptap.Quick Charge Current: up to 3A*Protection: Over Current, Voltage & Temperature Dimensions:121,9 mm x 94 mm x 83,8 mmWeight: 0,5 kgInput Voltage: AC 100-240V 50/60Hz

core swx CXV-C3MK The Core SWX CXV-C3MK v-mount plate is specifically designed for select Canon EOS Cine cameras that accept DC 4-pin XLR input including the Canon C300 Mark III and Canon C500 Mark II. It directly mounts to the accessory bay on the rear of the camera, allowing use of 14.4V V-mount batteries while also leaving the camera’s battery bay available for a BP-A style pack for hotswapping capabilities. To power additional accessories, it’s equipped with two powertaps and one USB. Direct mount for Canon EOS Cine cameras with DC 4-pin XLR inputInput: 11.9vdc-16.8vdc, UnregulatedOutput for camera: 11.9vdc-16.8vdc, UnregulatedPowertap: DC 11.9-17v, UnregulatedUSB: DC 5v, Unregulated

Core SWX Battery Plate for Sony PXW-FX9 SKU: CXV-FX9 The CXV-FX9 mounts directly to the back of the Sony PXW-FX9, as an alternative power option to the Sony XDCA-FX9. The milled aluminum product inserts into the battery slot of the camera and also attaches into the top of the camera (with included screw hardware) to provide a secure platform for mounting v-mount batteries directly onto the FX9 camera. It has a 19.5v DC output with a visual low battery warning LED and a 4-pin XLR DC input for hotswapping between external and on-board power. In addition, it’s equipped with two powertaps to power additional accessories. A USB firmware update port on the rear ensures future compatibility with camera firmware updates. Input: 11.9vdc-16.8vdc(on-board and 4p XLR DC-in). Inputs are hot swappable.Output for camera: DC 19.5vPowertaps: DC 11.9-17v, UnregulatedSize: 13,72 cm x 8,51 cm x 9,40 cmWeight: 0,54 kgFirmware port: USB MicroLED power indication: Bi-colour(red/green)

Core SWX CXV-KOMU BP to V-Mt plate direct mount for RED KomodoLeaves the camera’s DC input available for AC power and battery hot-swapWhen used with “smart” batteries that pass SMBUS data like Core SWX batteries, the camera will read battery percentage and runtimeEquipped with 3 DC output ports: P-Tap, USB, and 2pin LemoThe plate has a reinforced V-Mount locking mechanismRed Approved! Specifications Input: 11.9vdc-16.8vdcOutput for camera: DC 7.4v, Dual Canon BP backingPowertap: DC 11.9-17v, Unregulated2p Lemo: DC 11.9-17v, UnregulatedUSB: DC 5v, UnregulatedFirmware port: USB MicroLED power indication: Bi-color(red/green)

Core SWX CXV-TS-VRAP The Core SWX CXV-TS-VRAP connects to the v-mount of the DSMC3 Raptor to allow you to attach two V-mount battery packs(full size, mini or micro) to the rear of the camera. Different from some other plates, the all-aluminum build of this plate makes it feel like part of the camera. The build quality is next level and we have added some new features on this plate we’ve never done before. Since the Raptor outputs are found on the rear of the camera, this hotswap allows you to slide out the right side mount plate to the proper depth so as to not block the inputs and outputs of the Raptor camera. The set screw then locks the positioning in place allowing you to accommodate any size battery packs. A storage slot with magnetic hold keeps the allen key in place to reposition at any time. Choose between discharging both battery packs at the same time equally or one and then the other. To draw from both batteries equally, switch the button to the “I I” setting. When the switch is in the “I+I” setting, it will draw power from the camera operator side battery first, and then move to the other. Either way you choose, you can still hot swap batteries to keep continuous power going to your camera and accessories. All mode changes should be done prior to camera startup. The switch is deactivated once power is being drawn from the plate. Features RED V-Raptor Sharkfin V-mtAllows you to mount two packs and hotswap on the RED Raptor for extended runtimesAllows you to use other size batteries instead of just micro sized packsInput: DC 11-17vOutput for Camera: DC 11-17v, Unregulated ParalleledOutput for 2x P-Tap: DC 11-17v, Unregulated, 7.2A max

Core SWX Powertap Breakout Adapter PTM-3PTF The PTM-3PTF is a powertap breakout cable tripling the number of female powertap outputs available from any battery mount plate. It is perfect for powering multple accessories and can handle up to 10A.

Core SWX Direct Connect for APX-360HVSKU: HLX-2HV-DC Core’s patent pending Direct Connect plates allow the light owner to quickly exchange the V-mount plates on their Aputure 600-series light to support Apex high voltage packs along with Core’s Helix series of packs. The beauty of these plates is that they require minimal technical skill to connect and still allow you to use all your 14v v-mount packs.To exchange the plates on your Aputure 600-series light unscrew your current v-mount plates, snip the wiring of the existing plates and the connect blocks, clip our direct plates onto the existing wiring and screw back on the Apex Direct Connect plate. No soldering skills or tools required.This modification is only required so to leverage the high voltage efficiencies of the Apex HV packs. Standard APX-360V packs will work without any modification to the lighting ballast. Input: DC 11-34vOutput for Light: DC 11-34vSize: 8,26 cm x 13,97 cm x 1,27 cmWeight: 0,18 kg

Core SWX GoPro Regulator Cable Cig SKU: DV-GP3-CIG6 The Core SWX DV-GP3-CIG6 allows you to power your GoPro Hero 3/3+ camera via a cigarette lighter whether in a vehicle or otherwise. The cable will convert the available 12v power to the proper operable voltage for the GoPro camera. While other options may be available, the Switronix DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power connection is essential when using the camera, since the GoPro's are often put in precarious, high impact situations. The adapter also allows the use of the front submersible housing of the GoPro and the skeleton back.  Covering the back skeleton housing openings with some gaffer tape, would prove to offer a splash/water resistant housing for many situations. The cable is offered in a 15.24 cm (6") length which should provide plenty of length when mounted in or around a car, and most other situations.  Input DC 12v via male cigarette plugOutput for Camera 5vLength approx. 15.24 cm (6")

Core SWX DV-GP3-PT3 GoPro Regulator Cable 3 36' Regulator Cable for GoPRO Hero 3/3+ with Powertap The Core SWX DV-GP3-PT3 allows you to power your GoPro Hero 3/3+ camera via a powertap connector, a standard in the professional video industry. The cable will convert the available 8-24vdc power to the proper operable voltage for the GoPro camera. While other options may be available, the Switronix DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power connection is essential when using the camera, since the GoPro's are often put in precarious, high impact situations. The adapter also allows the use of the front submersible housing of the GoPro and the skeleton back. Covering the back skeleton housing openings with some gaffer tape, would prove to offer a splash/water resistant housing for many situations. Input DC 8-24v via male powertap plugOutput for Camera 5vLength approx. 91.44 cm

Core SWX DV-GP3-XT60 GoPRO Regulator Cable Y The Core SWX DV-GP3-XT60 allows you to power your GoPro Hero 3/3+ camera via an available XT60 connector from your Quad, Hex or Octocopter(i.e DJI Phantom battery pack with XT60 connector). The cable will convert the available power(3S-6S battery pack) to the proper operable voltage for the GoPro camera. The Y adapter cable allows you to tap of the copter power, and power both the copter as well as GoPro from the same power source. The GoPro draws minimal power, and will reduce flight times by no more then 30seconds per hour of available copter power. While other options maybe available, the Switronix DV-GP3 adapter locks into the battery receptacle on the back of the camera, so you no longer need to rely on the USB connection on the side of the camera which can come out easily. Providing a reliable and secure power connection is essential when using the camera, since the GoPro's are often put in precarious, high impact situations. Whether wind turbulence, motor vibration, or impact, you can insure the camera will be powered. The adapter also allows the use of the front submersible housing of the GoPro and the skeleton back. Covering the back skeleton housing openings with some gaffer tape, would prove to offer a splash/water resistant housing for many situations. The cable is offered in a 30.48 cm length which should provide plenty of length when mounted below the copter or via brushless gimbal. For the DJI Phantom, the gauge of the cable is thin enough coming from the DV-GP3-XT60 to allow you to close the battery door and not pinch the cable. Input DC 8-24v via XT60 connector from a copter LIPO battery packOutput for Camera 5vLength approx. 30.48 cm

Core SWX Fleet Q4 Mini Series The Fleet Q4 Mini Charger is a compact and versatile charging solution designed to provide efficient charging for your battery packs. With the Core SWX Fleet Q4 Mini Charger, you can charge a variety of battery packs commonly used in rental, ENG, and cinema applications. The charger can handle all battery sizes available in Core’s lineup. However, when all four packs are connected, it can only accommodate the 50Wh, 98Wh, and 150Wh battery packs, specifically the NANO, NEO, or HelixMax models. Similar to its larger counterpart, the Fleet Q4 Mini Charger features independent charge bays. Each bay focuses on the individual battery connected, ensuring fast and efficient charging. You can expect to recharge four 98Wh battery packs in just 2.5 hours, offering one of the industry’s fastest charge times. When space is at a premium, whether on a busy film set or when packing gear for travel, the small footprint of the Fleet Q4 Mini Charger becomes a crucial advantage. Its compact size allows you to maximize the available space and optimize your workflow. Despite its compact size, the Fleet Q4 Mini Charger does not compromise on durability. Constructed with a slim, lightweight aluminum design, it provides portability and ease of use. The charger’s low-profile design minimizes space requirements and allows for easy stacking when multiple chargers are utilized. The Fleet Mini Charger combines reliability, efficiency, and portability, making it an excellent choice for your charging needs. Whether you’re working on a film set, ENG shoot, or rental application, this charger will deliver the power you need to keep your batteries ready for action. Quick Charge Current: 3APower Range per Channel: up to 48watts/hr.Size: 23,37 cm x 17,53 cm x 7,62 cmWeight: 1,49 kgInput Voltage: 90-240VAC 50/60Hz

Core SWX Fleet Q4 Mini Series The Fleet Q4 Mini Charger is a compact and versatile charging solution designed to provide efficient charging for your battery packs. With the Core SWX Fleet Q4 Mini Charger, you can charge a variety of battery packs commonly used in rental, ENG, and cinema applications. The charger can handle all battery sizes available in Core’s lineup. However, when all four packs are connected, it can only accommodate the 50Wh, 98Wh, and 150Wh battery packs, specifically the NANO, NEO, or HelixMax models. Similar to its larger counterpart, the Fleet Q4 Mini Charger features independent charge bays. Each bay focuses on the individual battery connected, ensuring fast and efficient charging. You can expect to recharge four 98Wh battery packs in just 2.5 hours, offering one of the industry’s fastest charge times. When space is at a premium, whether on a busy film set or when packing gear for travel, the small footprint of the Fleet Q4 Mini Charger becomes a crucial advantage. Its compact size allows you to maximize the available space and optimize your workflow. Despite its compact size, the Fleet Q4 Mini Charger does not compromise on durability. Constructed with a slim, lightweight aluminum design, it provides portability and ease of use. The charger’s low-profile design minimizes space requirements and allows for easy stacking when multiple chargers are utilized. The Fleet Mini Charger combines reliability, efficiency, and portability, making it an excellent choice for your charging needs. Whether you’re working on a film set, ENG shoot, or rental application, this charger will deliver the power you need to keep your batteries ready for action. Quick Charge Current: 3APower Range per Channel: up to 48watts/hr.Size: 23,37 cm x 17,53 cm x 7,62 cmWeight: 1,49 kgInput Voltage: 90-240VAC 50/60Hz

Core SWX FLEET-DM2A The Core SWX Fleet Micro series of chargers are the most advanced in the industry.  The chargers offer a complete battery management system for your battery “Fleet,” including an on-board LCD to monitor the battery packs’ smart battery data.  Besides being the fastest battery charger in the industry today(four 98wh packs in under 2 1/2hrs.), the charger offers a TEST mode to determine battery health and recharge performance.    With the inclusion of a micro USB on the rear of the unit, that data can then be viewed and managed with a PC application.  The micro USB doubles as an input for future free firmware upgrades(downloadable via the web). In addition to battery management, the Fleet Micro chargers includes SafeFly mode.  With one touch of the onboard membrane button console, the charger will either charge the connected packs to up to 30% or discharge to under 30%, depending on the state of charge of those connected.  The one-touch operation allows you to quickly prepare all packs for air travel or shipment.  This feature can also be applied to a single connected pack. The Fleet Micro series is also the most cross-compatible, able to address not only Core SWX battery packs but those offered by RED, Anton/Bauer, and many more.  With this additional charge compatibility, it provides piece of mind that whether you’re on location with multiple crews, charging legacy packs, or your rental Fleet, the Fleet Micro has you covered. The series includes a 90w DC 4-pin XLR power supply to power most cameras.  In addition to the on-board power supply, the charger doubles as a battery bank when in “Hypercine” power supply mode(unregulated 12v-16.8v DC).  The charger parallels all the on-board battery packs to provide continuous power, and the charger’s LCD reports back available capacity as well as remaining runtime.  With the optional “Hypercine module,” the charger provides both unregulated 12v-16.8v 4-pin XLR, as well as 28v regulated 3-pin XLR DC outputs. Quick Charge Current: 3A SimultaneousDischarge Current: Up to 2A per channelSize: 23.11 cm x 8.51 cm x 16.69 cmWeight: 0.82 kgInput Voltage: 90-240VAC 50/60Hz4x20 Character Backlit LCD

Core SWX FLEET-DM2S The Core SWX Fleet Micro series of chargers are the most advanced in the industry.  The chargers offer a complete battery management system for your battery “Fleet,” including an on-board LCD to monitor the battery packs’ smart battery data.  Besides being the fastest battery charger in the industry today(four 98wh packs in under 2 1/2hrs.), the charger offers a TEST mode to determine battery health and recharge performance. With the inclusion of a micro USB on the rear of the unit, that data can then be viewed and managed with a PC application.  The micro USB doubles as an input for future free firmware upgrades(downloadable via the web). In addition to battery management, the Fleet Micro chargers includes SafeFly mode.  With one touch of the onboard membrane button console, the charger will either charge the connected packs to up to 30% or discharge to under 30%, depending on the state of charge of those connected.  The one-touch operation allows you to quickly prepare all packs for air travel or shipment.  This feature can also be applied to a single connected pack. The Fleet Micro series is also the most cross-compatible, able to address not only Core SWX battery packs but those offered by RED, Anton/Bauer, and many more.  With this additional charge compatibility, it provides piece of mind that whether you’re on location with multiple crews, charging legacy packs, or your rental Fleet, the Fleet Micro has you covered. The Core SWX Fleet Micro series includes a 90w DC 4-pin XLR power supply to power most cameras.  In addition to the on-board power supply, the charger doubles as a battery bank when in “Hypercine” power supply mode(unregulated 12v-16.8v DC).  The charger parallels all the on-board battery packs to provide continuous power, and the charger’s LCD reports back available capacity as well as remaining runtime.  With the optional “Hypercine module,” the charger provides both unregulated 12v-16.8v 4-pin XLR, as well as 28v regulated 3-pin XLR DC outputs. Quick Charge Current: 3A SimultaneousDischarge Current: Up to 2A per channelSize: 23.11 cm x 8.51 cm x 16.69 cmWeight: 0.82 kgInput Voltage: 90-240VAC 50/60Hz4x20 Character Backlit LCD

Core SWX GP-A-FS7 Gold Mount Plate for Sony FS7 The GP-A-FS7 3-Stud adapter mounts directly to the back of the Sony FS7, as an alternative power option to the XDCA-FS7.  It provides a secure platform for mounting 3-Stud batteries directly onto the FS7 camera.  In addition, a 4-pin XLR is provided as a secondary power input option.  Additionally, two p-taps are installed on the plate to offer additional power outputs Technical data Input DC 11-17vOutput for Camera DC 11-17v, Unregulated Output for P-TapsSize 82.55 mm x 139.7 mm x 88.9 mmWeight 0.73 kg

Core SWX Gold Mount plate for Blackmagic URSA Gold Mount plate for Blackmagic URSA with P-tap and BMD 12way Molex connection Input DC 11-17vOutput for Camera DC 11-17v, Unregulated Black Magic Camera PinOutput for TWO P-Taps DC 11-17v, UnregulatedSize 8,26 cm x 13,97 cm x 1,27 cmWeight 0,18 kg

Core SWX GP-DV-CH PowerBase-70 Regulator Block for Canon 5D / 7D / 60D Interchangeable Regulator Block for PowerBase-70 to be used with Canon 5DCanon 7DCanon 60D Cable lenght ok. 30 cm. Input: DC 11-17vOutput for Camera: DC 7.9v, 3AOutput for P-Tap: DC 11-17v, unregulatedGreen LED Indication: Camera power output

Core SWX GP-S V-Mount Camera Plate V-Type plate mounts on to the camera to provide a quick release connection with V-Type mount batteries. The Core SWX GP-S includes a P-Tap port to power an on-board light. 

Core SWX GP-S-C3MK2 Core SWX GP-S-C3MK2 is a V-mount Plate with 2 Powertaps and Lemo compatible with the Canon C300 MKII and Canon C200. The GP-S-C3MK2 plate is outfitted with the specific lemo connector needed to power the camera. In addition, the C300 mount plates include two unregulated PowerTap ports to power 12v accessories. The GP-S-C300MK2 will work with all V-Mount battery packs. Input: DC 11-17vOutput for Camera: DC 11-17vOutput for Two P-Taps: DC 11-17v, UnregulatedSize: 8,25 cm x 13,97 cm x 1,27 cmWeight: 0,18 kg

Core SWX GP-S-FS7 V-Mount Battery Plate for Sony PXW-FS7 The GP-S-FS7 V-mount adapter mounts directly to the back of the Sony FS7, as an alternative power option to the XDCA-FS7.  It provides a secure platform for mounting V-mount batteries directly onto the FS7 camera.  In addition, a 4-pin XLR is provided as a secondary power input option.  Additionally, two p-taps are installed on the plate to offer additional power outputs. GP-S-FS7 Technical data Input DC 11-17vOutput for Camera DC 11-17v, Unregulated Output for P-TapsSize 82.55  mm x 139.7 mm x 88.9 mmWeight 0.73 kg