APUTURE NOVA II 1x1 500W tunable color high fidelity panel lightThe NOVA II 1x1 has a wide range of tunable white light with the best SSI performance to emulate tungsten, daylight, and everything in between. The BLAIR-CG light engine offers a tunable white range from 1,800-20,000K with full 100% MITC +/- Green adjustment. The Indigo emitters activate natural fluorescence for lifelike colors, and a new Extended Red emitters improve skin tone reproduction.The BLAIR-CG light engine in the APUTURE NOVA II 1x1 covers the greatest range of saturated colors of any panel light. The expanded BLAIR-CG light engine covers more than 90% of the Rec.2020 color space. There are four blues and two reds, including Extended Red, for increased gamut and saturation. Using x,y and HSIC+ modes, dial in precise colors to match products, create backdrops, and even dial in perfect greenscreen or bluescreen keys to match your camera’s sensor.In the boxAP0400040B1x NOVA II 1x1 Lamp Head1x NOVA 1x1 Removable Yoke with TV-MP Pin1x NOVA 1x1 Flat Diffuser1x AC Power Cable 6m1x Safety Chain 50cmAP04000311x NOVA II 1x1 Lamp Head1x NOVA 1x1 Removable Yoke with TV-MP Pin1x NOVA 1x1 Flat Diffuser1x AC Power Cable 6m1x Safety Chain 50cm1x NOVA 1x1 Rolling Hard Case

APUTURE NOVA II 1x1 500W tunable color high fidelity panel lightThe NOVA II 1x1 has a wide range of tunable white light with the best SSI performance to emulate tungsten, daylight, and everything in between. The BLAIR-CG light engine offers a tunable white range from 1,800-20,000K with full 100% MITC +/- Green adjustment. The Indigo emitters activate natural fluorescence for lifelike colors, and a new Extended Red emitters improve skin tone reproduction.The BLAIR-CG light engine in the APUTURE NOVA II 1x1 covers the greatest range of saturated colors of any panel light. The expanded BLAIR-CG light engine covers more than 90% of the Rec.2020 color space. There are four blues and two reds, including Extended Red, for increased gamut and saturation. Using x,y and HSIC+ modes, dial in precise colors to match products, create backdrops, and even dial in perfect greenscreen or bluescreen keys to match your camera’s sensor.In the boxAP0400040B1x NOVA II 1x1 Lamp Head1x NOVA 1x1 Removable Yoke with TV-MP Pin1x NOVA 1x1 Flat Diffuser1x AC Power Cable 6m1x Safety Chain 50cmAP04000311x NOVA II 1x1 Lamp Head1x NOVA 1x1 Removable Yoke with TV-MP Pin1x NOVA 1x1 Flat Diffuser1x AC Power Cable 6m1x Safety Chain 50cm1x NOVA 1x1 Rolling Hard Case

APUTURE NOVA II 2x1 tunable color high fidelity panel lightThe NOVA II 2x1 has a wide range of tunable white light with the best SSI performance to emulate tungsten, daylight, and everything in between. The BLAIR-CG light engine offers a tunable white range from 1,800-20,000K with full 100% MITC +/- Green adjustment. The Indigo emitters activate natural fluorescence for lifelike colors, and a new Extended Red emitters improve skin tone reproduction.The BLAIR-CG light engine in the APUTUTE NOVA II 2x1 covers the greatest range of saturated colors of any panel light. The expanded BLAIR-CG light engine covers more than 90% of the Rec.2020 color space. There are four blues and two reds, including Extended Red, for increased gamut and saturation. Using x,y and HSIC+ modes, dial in precise colors to match products, create backdrops, and even dial in perfect greenscreen or bluescreen keys to match your camera’s sensor. AP0400040J - In the box1x NOVA II 2x1 Lamp Head1x Removable Yoke with Junior Pin1x NOVA II 2x1 Flat Diffuser1x AC Power Cable1x Safety Chain 50cmAP04000318 - In the box1x NOVA II 2x1 Lamp Head1x Removable Yoke with Junior Pin1x NOVA II 2x1 Flat Diffuser1x AC Power Cable1x Safety Chain 50cm1x Rolling Hard Case

APUTURE NOVA II 2x1 tunable color high fidelity panel lightThe NOVA II 2x1 has a wide range of tunable white light with the best SSI performance to emulate tungsten, daylight, and everything in between. The BLAIR-CG light engine offers a tunable white range from 1,800-20,000K with full 100% MITC +/- Green adjustment. The Indigo emitters activate natural fluorescence for lifelike colors, and a new Extended Red emitters improve skin tone reproduction.The BLAIR-CG light engine in the APUTUTE NOVA II 2x1 covers the greatest range of saturated colors of any panel light. The expanded BLAIR-CG light engine covers more than 90% of the Rec.2020 color space. There are four blues and two reds, including Extended Red, for increased gamut and saturation. Using x,y and HSIC+ modes, dial in precise colors to match products, create backdrops, and even dial in perfect greenscreen or bluescreen keys to match your camera’s sensor. AP0400040J - In the box1x NOVA II 2x1 Lamp Head1x Removable Yoke with Junior Pin1x NOVA II 2x1 Flat Diffuser1x AC Power Cable1x Safety Chain 50cmAP04000318 - In the box1x NOVA II 2x1 Lamp Head1x Removable Yoke with Junior Pin1x NOVA II 2x1 Flat Diffuser1x AC Power Cable1x Safety Chain 50cm1x Rolling Hard Case

Astora PS 1300B With Astora lights you can make any type of film, anywhere, with any crew and camera. The only limit is your imagination. As all Astora lights, the PS offers pristine color reproduction with a TLCI up to 98 and a CRI up to 97. Apart from all specs the Astora PS just renders colors accurately and naturally. A rock-solid but lightweight metal housing protects the Astora PS on any adventures. In many situations brightness is king. With the Astora Power-Spot you’ll have enough power to bounce or diffuse the light, light at a distance or in bright sunlightWith a power consumption below 86,4W, the Astora Power-Spot can be powered with any normal V-Mount battery and is not restricted to expensive high-current V-Mount batteries In the boxPS 1300B Bi-color Power-Spot LED PanelBarndoorsRemote ControllerAC Adapter & CableDatasheetQuick Start GuideEC Conformity Signed

ASTORA PS 1300D In many situations brightness is king. With the Astora Power-Spot you’ll have enough power to bounce or diffuse the light, light at a distance or in bright sunlight With a power consumption below 86,4W, the Astora Power-Spot can be powered with any normal V-Mount battery and is not restricted to expensive high-current V-Mount batteries. As all Astora lights, the PS offers pristine color reproduction with a TLCI up to 98 and a CRI up to 97. Apart from all specs the Astora PS just renders colors accurately and naturally. With the integrated wireless control you can easily adjust settings from anywhere, at any time. The metal housing of the Astora WS was designed and optimized for passive cooling through efficient internal airflow as well as acting as a heatsink, to operate fan-less and silent. A rock-solid but lightweight metal housing protects the Astora PS on any adventures. Also with high frame rates or shutter speeds the Astora PS will deliver consistent lighting without flicker. The Astora PS comes as a complete package including removable barn-doors, a remote controller for its wireless control and a ready to go for your next job.

ASTORA SF 100 ASTORA SF 100 gives an Ultra-Soft Light Quality and is a bi-color Super-Flood Soft LED Panel Light With the Astora SF you can easily create soft diffused light that wraps nicely around its subject. Available in three sizes you can choose from maximum portability to largest aperture, as size is key for softness As all Astora lights, the SF Soft offers pristine color reproduction with a TLCI up to 98 and a CRI up to 97. Apart from all specs the Astora FS Soft just renders colors accurately and naturally. With up to 13000 lumens the Astora SF Soft series is a soft yet bright lightsource that mimics the effect of a softbox in the most energy efficient way keeping a compact slim form factor. The metal housing of the Astora SF Soft series was designed and optimized for passive cooling through efficient internal airflow as well as acting as a heatsink, to operate fan-less and silent. In addition to wireless control the ASTORA SF also has DMX 512 built-in, so that it can be integrated into any existing environment easily via industry standard XLR connectors. A rock-solid but lightweight metal housing protects the Astora FS Soft on any adventures. Also with high frame rates or shutter speeds the Astora SF Soft will deliver consistent lighting without flicker. The Astora SF Soft comes as a complete package including removable barn-doors, a remote controller for its wireless control and ready to go for your next job.

ASTORA SF 120 ASTORA SF 120 gives an Ultra-Soft Light Quality and is a bi-color Super-Flood Soft LED Panel Light With the Astora SF you can easily create soft diffused light that wraps nicely around its subject. Available in three sizes you can choose from maximum portability to largest aperture, as size is key for softness As all Astora lights, the SF Soft offers pristine color reproduction with a TLCI up to 98 and a CRI up to 97. Apart from all specs the Astora FS Soft just renders colors accurately and naturally. With up to 13000 lumens the Astora SF Soft series is a soft yet bright lightsource that mimics the effect of a softbox in the most energy efficient way keeping a compact slim form factor. The metal housing of the Astora SF Soft series was designed and optimized for passive cooling through efficient internal airflow as well as acting as a heatsink, to operate fan-less and silent. In addition to wireless control the ASTORA SF also has DMX 512 built-in, so that it can be integrated into any existing environment easily via industry standard XLR connectors. A rock-solid but lightweight metal housing protects the Astora FS Soft on any adventures. Also with high frame rates or shutter speeds the Astora SF Soft will deliver consistent lighting without flicker. The Astora SF Soft comes as a complete package including removable barn-doors, a remote controller for its wireless control and ready to go for your next job.

ASTORA SF 200 ASTORA SF 200 gives an Ultra-Soft Light Quality and is a bi-color Super-Flood Soft LED Panel Light With the Astora SF you can easily create soft diffused light that wraps nicely around its subject. Available in three sizes you can choose from maximum portability to largest aperture, as size is key for softness As all Astora lights, the SF Soft offers pristine color reproduction with a TLCI up to 98 and a CRI up to 97. Apart from all specs the Astora FS Soft just renders colors accurately and naturally. With up to 13000 lumens the Astora SF Soft series is a soft yet bright lightsource that mimics the effect of a softbox in the most energy efficient way keeping a compact slim form factor. The metal housing of the Astora SF Soft series was designed and optimized for passive cooling through efficient internal airflow as well as acting as a heatsink, to operate fan-less and silent. In addition to wireless control the ASTORA SF also has DMX 512 built-in, so that it can be integrated into any existing environment easily via industry standard XLR connectors. A rock-solid but lightweight metal housing protects the Astora FS Soft on any adventures. Also with high frame rates or shutter speeds the Astora SF Soft will deliver consistent lighting without flicker. The Astora SF Soft comes as a complete package including removable barn-doors, a remote controller for its wireless control and ready to go for your next job.

ASTORA WS 840B Bi-Color Panel The ASTORA WS is the most portable light from our series and your perfect travel companion, built to go wherever adventure takes you. Integrated controls and battery adapter plate on the light head make it hassle free to setup and use. No cables or separate controls getting in the way. Compact in height, the ASTORA WS features a widescreen aperture to maximize surface area to produce a soft light that wraps around its subjects. As all Astora lights, the WS offers pristine color reproduction with a TLCI up to 98 and a CRI up to 97. Apart from all specs the Astora WS just renders colors accurately and naturally. With its built-in NP-F battery plate the Astora WS can easily be powered by affordable NP-F type batteries. The Astora WS is one of the brightest lights in its size-class, combinith the integrated wireless control you can easily adjust settings from anywhere, at any time. Available as pure Daylight and Bi-color model, you can choose between maximum brightness at pure Daylight or ultimate flexibility to match ambient color temperatures quickly and accurately with the Bi-color model. Also with high frame rates or shutter speeds the Astora SF Soft will deliver consistent lighting without flicker. The metal housing of the Astora WS was designed and optimized for passive cooling through efficient internal airflow as well as acting as a heatsink, to operate fan-less and silent. The Astora PS comes as a complete package including removable barn-doors, a remote controller for its wireless control and ready to go for your next job.

ASTORA WS 840D Daylight Panel The ASTORA WS is the most portable light from our series and your perfect travel companion, built to go wherever adventure takes you. Integrated controls and battery adapter plate on the light head make it hassle free to setup and use. No cables or separate controls getting in the way. Compact in height, the ASTORA WS features a widescreen aperture to maximize surface area to produce a soft light that wraps around its subjects. As all Astora lights, the WS offers pristine color reproduction with a TLCI up to 98 and a CRI up to 97. Apart from all specs the Astora WS just renders colors accurately and naturally. With its built-in NP-F battery plate the Astora WS can easily be powered by affordable NP-F type batteries. The Astora WS is one of the brightest lights in its size-class, combinith the integrated wireless control you can easily adjust settings from anywhere, at any time. Available as pure Daylight and Bi-color model, you can choose between maximum brightness at pure Daylight or ultimate flexibility to match ambient color temperatures quickly and accurately with the Bi-color model. Also with high frame rates or shutter speeds the Astora SF Soft will deliver consistent lighting without flicker. The metal housing of the Astora WS was designed and optimized for passive cooling through efficient internal airflow as well as acting as a heatsink, to operate fan-less and silent. The Astora PS comes as a complete package including removable barn-doors, a remote controller for its wireless control and ready to go for your next job.

F&V K12000 SE Daylight LED Studio Panel The F&V SE series of LED lights simplifies the F&V product range and combines the advantages of the F&V Lumic, F&V Plus and F&V UltraColor series and offers the highest specs, yet maintaining budget prices. Color reproduction Lumic: CRI 85-90 Plus: CRI 90-92 UltraColor: TLCI 94-96SE Series: TLCI 95-99, CRI 93-97 Integrating the new F&V Quick Release system for panels, the SE series comes with a full range of optional light shaping and control tools available from the beginning to meet the lighting needs in any situation. With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2), the F&V K12000 SE Daylight LED Studio Panel fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant. An advanced design results in even more brightness than previous generations could achieve. Yet also the new Special Editions maintain a wide beam angle to not sacrifice softness for brightness. Incorporating the new F&V attachment system for light shaping accessories, the F&V K12000 SE Daylight fixtures are compatible to the full range of tools like barndoors, honeycomb grids, diffusors, filterholders and softboxes. LED SOURCE Beam Angle: 50°White Light: Daylight 5,600 KColor Temperature Tolerance: ± 200 K (nominal)Color Rendition: TLCI 95-99 (97±2), CRI 93-97 (95±2)Dimming: 0 -100% ContinuousControl: On-Board ControllerEstimated LED Lifetime: 50,000 hours (15 Years of average use) POWER SUPPLY Power Voltage Range: 10 - 18 V DCInput Current Range: Max. 8.01A @ 10V / 4.45A @ 18V Power Consumption: 75.5 W Nominal, 80.1 W MaximumPower Connection: Neutrik speak ON NL2MP (Plug: Neutrik speak ON NL2FX)Battery Option: V-mount Battery Plate ×1 - Built in / 3-stud Gold Mount Plate - Optional GENERAL Thermal Design: Silent Passive CoolingMounting: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin)Housing Color: BlackAmbient Temperature Operation: -20 to +45º C (-4 to +113º F)Protection Class: IP 20Certifications: CE (EMC, LVD, RoHS, REACH), ISO9001:2000

F&V K12000S SE The F&V SE series of LED lights simplifies the F&V product range and combines the advantages of the F&V Lumic, F&V Plus and F&V UltraColor series and offers the highest specs, yet maintaining budget prices. Color reproduction Lumic: CRI 85-90 Plus: CRI 90-92 UltraColor: TLCI 94-96SE Series: TLCI 95-99, CRI 93-97 Integrating the new F&V Quick Release system for panels, the SE series comes with a full range of optional light shaping and control tools available from the beginning to meet the lighting needs in any situation. With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2), the F&V K12000 SE Daylight LED Studio Panel fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant. An advanced design results in even more brightness than previous generations could achieve. Yet also the new Special Editions maintain a wide beam angle to not sacrifice softness for brightness. Incorporating the new F&V attachment system for light shaping accessories, the F&V K12000 SE Daylight fixtures are compatible to the full range of tools like barndoors, honeycomb grids, diffusors, filterholders and softboxes. LED SOURCE Beam Angle: 50°White Light: Daylight 5,600 KColor Temperature Tolerance: ± 200 K (nominal)Color Rendition: TLCI 95-99 (97±2), CRI 93-97 (95±2)Dimming: 0 -100% ContinuousControl: On-Board ControllerEstimated LED Lifetime: 50,000 hours (15 Years of average use) POWER SUPPLY Power Voltage Range: 10 - 18 V DCInput Current Range: Max. 8.01A @ 10V / 4.45A @ 18V Power Consumption: 75.5 W Nominal, 80.1 W MaximumPower Connection: Neutrik speak ON NL2MP (Plug: Neutrik speak ON NL2FX)Battery Option: V-mount Battery Plate ×1 - Built in / 3-stud Gold Mount Plate - Optional GENERAL Thermal Design: Silent Passive CoolingMounting: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin)Housing Color: BlackAmbient Temperature Operation: -20 to +45º C (-4 to +113º F)Protection Class: IP 20Certifications: CE (EMC, LVD, RoHS, REACH), ISO9001:2000

F&V K2000 Power With half the surface area in comparison to the original K4000 Lumic, we were able to achieve a higher brightness than before at 1x1 size (K2000 Power: 2723 lux@1m 75° beam angle, K4000 Lumic: 2475 lux@1m 60°), making the K2000 Power the perfect portable lightsource. Being compact in size, low in weight and with a separate battery plate that can be mounted on the bottom of the light stand as a counterweight, the F&V K2000 Power is the perfect travel companion that also works reliably on lightweight light stands. Incorporating the new F&V attachment system for light shaping accessories, you can mount light shaping tools like barndoors, honeycomb grids, diffusers, filterholders and softboxes easily and securely to the K2000 Power Product Highlights TLCI 95-99 (97±2), CRI 93-97 (95±2)Bright (2723 lux@1m)Beam Angle 75°Net Weight 1.4 kg (3.0 lbs)Packed Size 500*90*345 mm Technical data TLCI: 97 ± 2.0Color Rendering Index (Ra): 95 ± 2.0Correlated Color Temperature (CCT): 5,600 K (Daylight Model)Lux@1m: 2723Beam Angle: 75°Dimming: 0-100% ContinuousPower Voltage Range: 12-24 V DCNet Weight: 1.4 kg (3.0 lbs) (excluding AC adapter and batteries)Power Consumption: 42 W Nominal, 46 W Maximum In the box 1 x K2000 Power Daylight LED Panel Light1 x V-mount AC Adapter with Cable1 x V-mount Plate1 x NVM-95 95Wh V-Mount Battery

F&V K4000 Power SKU: 18022102 The F&V K4000 Power takes brightness to a new level and is about 3x as powerful as the original K4000 Lumic, with the KS-1 Intensifier even 4x as bright. K4000 Power + KS-1: 9920 lux@1m K4000 Power: 7200 lux@1m K4000 Lumic: 2475 lux@1m Wider beam angle Utilising a unique and efficient lens design, the K4000 Power can achieve incredible brightness with an even wider beam angle than the original K4000 Lumic, enabling users to illuminate wider scenes evenly. K4000 Power: 75° K4000 Lumic: 60° Improved Accessory Attachment No more screw-in distance holders. With the new quick release accessory attachment system you can mount light shapers to the K4000 Power securely with just one click. Vibrant color reproduction Balanced colors have always been a strength of the K4000 series. In comparison to the original K4000 Lumic colors are now even better than before. K4000 Power: CRI 93-97 (95±2) K4000 Lumic: >85 Stronger than ever An improved yoke gives the K4000 Power maximum stability in every situation. The housing is build from metal profiles for maximum strength with minimum weight. Easy to power The K4000 Power can be powered by a standard V-Mount battery and is not restricted to special and expensive high amperage batteries like other panels. Wide range of light shaping accessories The high brightness and wide beam angle are the perfect basis to modify the light of the K4000 Power with various light shapers to adapt to the needs of any lighting setup. Use honeycomb grids of various beam angles to narrow down the beam angle or the hard diffuser or KS-1 softbox to soften the light or widen the beam angle, so that you can shape the light creatively exactly as you need it.

F&V K4000 SE Daylight 3 Light Kit F&V K4000 SE Daylight 3 Light Kit includes 3 x F&V K4000 SE Daylight

F&V K4000 SE The SE series of LED lights simplifies the F&V product range and combines the advantages of the Lumic, Plus and UltraColor series and offers the highest specs, yet maintaining budget prices. Color reproduction Lumic: CRI 85-90Plus: CRI 90-92UltraColor: TLCI 94-96SE Series: TLCI 95-99, CRI 93-97 Brightness K4000 Lumic Daylight: 2650 lux@1mK4000 Plus Daylight: 2386 lux@1mZ400 UltraColor Daylight: 2170 lux@1mK4000 SE Daylight : 3046 lux@1m VIBRANT COLOR REPRODUCTION With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2). the SE fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant. INCREASED BRIGHTNESS An advanced design results in even more brightness than previous generations could achieve. Yet also the new Special Editions maintain a wide beam angle to not sacrifice softness for brightness. NEWATTACHMENT SYSTEM lncorporating the new F&V attachment system for light shaping accessories, the SE fixtures are compatible to the full range of tools like barndoors, honeycomb grids, diffusors, filterholders and softboxes.

F&V K4000S Power SKU: 18022002 The F&V K4000 Power takes brightness to a new level and is about 3x as powerful as the original K4000 Lumic, with the KS-1 Intensifier even 4x as bright. K4000 Power + KS-1: 9920 lux@1m                 K4000 Power: 7200 lux@1m  K4000 Lumic: 2475 lux@1m Wider beam angle Utilising a unique and efficient lens design, the K4000 Power can achieve incredible brightness with an even wider beam angle than the original K4000 Lumic, enabling users to illuminate wider scenes evenly. K4000 Power: 75°                               K4000 Lumic: 60° Improved Accessory Attachment No more screw-in distance holders. With the new quick release accessory attachment system you can mount light shapers to the K4000 Power securely with just one click. Vibrant color reproduction Balanced colors have always been a strength of the K4000 series. In comparison to the original K4000 Lumic colors are now even better than before. K4000 Power: CRI 93-97 (95±2)                                K4000 Lumic: >85 Stronger than ever An improved yoke gives the K4000 Power maximum stability in every situation. The housing is build from metal profiles for maximum strength with minimum weight. Easy to power The K4000 Power can be powered by a standard V-Mount battery and is not restricted to special and expensive high amperage batteries like other panels. Wide range of light shaping accessories The high brightness and wide beam angle are the perfect basis to modify the light of the K4000 Power with various light shapers to adapt to the needs of any lighting setup. Use honeycomb grids of various beam angles to narrow down the beam angle or the hard diffuser or KS-1 softbox to soften the light or widen the beam angle, so that you can shape the light creatively exactly as you need it. Technical data TLCI: 97 ± 2.0Color Rendering Index (Ra): 95 ± 2.0Correlated Color Temperature (CCT): 3200 K - 5600 K (Bi-Color Model)Lux@1m: up to 9310 with KS-1 IntensifierBeam Angle: 75°Dimming: 0-100% ContinuousPower Voltage Range: 13-24 V DCNet Weight: 2.3 kg (5.1 lbs) (excluding AC adapter and batteries)Power Consumption: 87 W Nominal, 90 W Maximum In the box 1 x K4000S Power Bi-Color LED Panel Light1 x V-mount AC Adapter with Cable

F&V K4000S SE 3 Light Kit F&V K4000S SE Bi-Color 3 Light Kit includes: 3 x F&V K4000S SE Bi-Color

F&V K4000S SE The SE series of LED lights simplifies the F&V product range and combines the advantages of the Lumic, Plus and UltraColor series and offers the highest specs, yet maintaining budget prices. Color reproduction Lumic: CRI 85-90Plus: CRI 90-92UltraColor: TLCI 94-96SE Series: TLCI 95-99, CRI 93-97 VIBRANT COLOR REPRODUCTION With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2). the SE fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant. INCREASED BRIGHTNESS An advanced design results in even more brightness than previous generations could achieve. Yet also the new Special Editions maintain a wide beam angle to not sacrifice softness for brightness. NEWATTACHMENT SYSTEM lncorporating the new F&V attachment system for light shaping accessories, the SE fixtures are compatible to the full range of tools like barndoors, honeycomb grids, diffusors, filterholders and softboxes. LED SOURCE Beam Angle: 50White Light: Bi-Color 3,200 K - 5,600 K  (Continuously Variable Correlated Color Temperature)Color Temperature Tolerance: ± 200 K (nominał) Color Rendition: TLCI 95-99 (97±2), CRI 93-97 (95±2) Dimming: 0-100% Continuous Control: On -Board Controller Estimated LED Lifetime: 50,000 hours (15 Years of average use) POWER SUPPY Power Voltage Range: 10- 18 V DClnput Current Range: Max . 2.62A@ 10V / 1.46A@ 18V Power Consumption: 25.5 W Nominał, 26.2 W Maximum Battery Option: V-mount Battery Plate x1 - Built in/ 3-stud Gold Mount Plate - Optional / NP-F to V-mount Adapter - Optional GENERAL Thermal Design: Silent Passive CoolingMounting: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin ) Housing Color: BlackAmbient Temperature Operation: -20 to +45° C (-4 to + 113° F)Protection Class: IP 20Certifications: CE (EMC, LVD, RoHS, REACH). ISO9001 :2000

F&V K8000S SE With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2), the F&V K8000S SE Bi-Color LED Studio Panel fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant. An advanced design results in even more brightness than previous generations could achieve. Yet also the new Special Editions maintain a wide beam angle to not sacrifice softness for brightness. Incorporating the new F&V attachment system for light shaping accessories, the F&V K8000S SE Bi-Color LED Studio Panels compatible to the full range of tool like barndoors, honeycomb grids, diffusors, filterholders and softboxes. LED SOURCE Beam Angle: 50°White Light: Bi-Color 3,200 K - 5,600 K, Continuously Variable Correlated Color TemperatureColor Temperature Tolerance: ± 200 K (nominal)Color Rendition: TLCI 95-99 (97±2), CRI 93-97 (95±2)Dimming: 0 -100% ContinuousControl: On-Board ControllerEstimated LED Lifetime: 50,000 hours (15 Years of average use) POWER SUPPLY Power Voltage Range: 10 - 18 V DCInput Current Range: Max. 5.24A @ 10V / 2.91A @ 18V Power Consumption: 49.3 W Nominal, 52.4 W MaximumPower Connection: Neutrik speak ON NL2MP (Plug: Neutrik speak ON NL2FX)Battery Option: V-mount Battery Plate ×1 - Built in / 3-stud Gold Mount Plate - Optional General Thermal Design: Silent Passive CoolingMounting: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin)Housing Color: BlackAmbient Temperature Operation: -20 to +45º C (-4 to +113º F)Protection Class: IP 20Certifications: CE (EMC, LVD, RoHS, REACH), ISO9001:2000

F&V Z1200VC F&V EverTrue Z1200VC CTD-Soft Vari-Color 3x1 LED Panel Light Location Pack is the new EverTrue Vari-Color 3x1 LED Panel with 5800 Lux, TLCI 99 EverTrue Vari-Color Variable CCT with fit on Planckian locusRecalibratable - always true colors CTD-Soft C Calibratable color engineT Tint control ± G/M adjustmentD Dimming curves selectable Our Vari-Color fixtures offer a true fit to the Planckian Locus aka Black Body Curve and with this true tintless white light at all correlated color temperatures throughout the adjustment range. In White-Light Mode the Z1200VC CTD-Soft offers maximum color reproduction from 2800K to 6500K. For more extreme color temperatures the extended Kelvin Mode offers an even wider CCT range from 2400 to 9900 Kelvin. UltraColor color reproduction is the basis of our new EverTrue fixtures, providing a well balanced, full-spectrum light for maximum color accuracy, with a TLCI up to 99.Calibration from our side ensures consistency from the beginning with virtually no tolerance from fixture to fixture. To ensure consistency after years of use EverTrue fixtures can be recalibrated by the user for accurate colors and color temperatures, always. The Z1200VC CTD-Soft has a large aperture providing soft brightness from a huge fixed diffusor panel. At the same time, it’s light in weight, thin and compact to fit into tight locations. With 270W the Z1200VC CTD-Soft is powerful and because of its sophisticated passive cooling system, it’s also completely silent.Technical data TLCI: 98±1Color Rendering Index (Ra): 95 - 98 (white-light mode)Vari-Color: 2,800 K - 6,500 K (white-light mode) | 2,400 K - 9,900 K (extended kelvin mode), Continuously Variable Correlated Color TemperatureLux@1m: 6000Beam Angle: 130°Dimming: 0-100% ContinuousPower Voltage Range: 24 - 36 V DCNet Weight: 4.6 kg Packed Weight: 5.2 kg Power Consumption: 245 W Nominal, 270 W Maximum In the box 1 x Light Head1 x Controller 1 x Battery Plate1 x Central Lollipop Mount

F&V EverTrue Z1200VC Rental Kit F&V EverTrue Z1200VC CTD-Soft Vari-Color 3x1 LED Panel Light Rental Kit is new EverTrue Vari-Color LED Panel, offering you more than a soft light TLCI: 98±1Color Rendering Index (Ra): 95 - 98  (white-light mode)Vari-Color:  2,800 K - 6,500 K (white-light mode) | 2,400 K - 9,900 K (extended kelvin mode), Continuously Variable Correlated Color TemperatureLux@1m: 6000Beam Angle: 130°Dimming: 0-100% ContinuousPower Voltage Range: 24 - 36 V DCNet Weight: 4.6 kgPacked Weight: 5.2 kgPower Consumption: 245 W Nominal, 270 W Maximum In the box 1 x F&V Z1200VC CTD-Soft EverTrue Vari-Color 3x1 LED-Panel1 x AC Adapter1 x Extended Control Cable1 x Handle Pair1 x Hard Flight Kit Case

F&V Z400SThe Z400S UltraColor utilizes the highly accurate F&V UltraColor LED. The F&V UltraColor LED has an exceedingly accurate color temperature and has a color rendering index of 95. With the UltraColor LED, F&V guarantees that each LED panel will vary no more than ±100K in color temperature as well as no more than ±1.0 in CRI. The UltraColor LED is the perfect LED for professional shooters and studios that need, without exception, maximum consistency. At a 60° beam angle, 400 LEDs produce a rich, bright, even beam of light which is perfect for high precision shoots in the studio or on location. The Z400S UltraColor comes packaged with the noteworthy Milk Diffusion Filter which creates a soft, glamorous light. The Milk Diffusion Filter now utilizes a snap-in, quick-release mounting system. This new mounting system will work in unison with additional accessories, giving users the ability to stack modifiers on top of one another. This secure mounting system allows the light to be rigged sideways or upside down without the possibility of accessories falling or sliding out. The F&V Z400S UltraColor has an expansion port which allows for installation of the SmartSync Control Circuit (SCC) as well as a DMX512 Module. The SCC module allows you to daisy chain multiple units together via CAT5 cables. When chained together, any light modified in the chain will cause all the other lights to dim in unison. The DMX512 Module allows for control of the lights with standard DMX512 dimmer boards. Package Contents 1 x Z400S LED Studio Panel1 x Milk Diffusion Filter4 x Quick Release Rods for Milk Diffusion Filter1 x V-Mount AC Power Adapter1 x Power Cable2 x Replacment Fuses Technical data Bulb UltraColor LEDLED Count 400Beam Angle 60°Power Variation 0-100% (Stepless)Color Rendering Index (Ra)≥ 95 ±1.0Operating Voltage 10-18V DCNominal Weight (excluding AC adapter and batteries) 2300 gNominal Size (L x W x H) 34.9 cm x 37.5 cm x 8.3 cmPower Draw 32WMax Current 3.2APower OptionsBuilt-in V-mount Battery PlateAC Power Adapter (AC operation of 90-265VAC 50/60Hz)Correlated Color Temperature (CCT)5600K ±100K (Daylight Model)3200K~5600K  ±100K (Bi-color Model) Light stands NOT included