Metabones Canon EF to MFT T Speed Booster SUPER16 0.58x SKU: MB_SPEF-m43-BT7 Metabones Canon EF to Micro Four Thirds Speed Booster SUPER16 adapters are designed exclusively for Blackmagic Design cameras with Super 16mm sensor size, such as Blackmagic Mirco Cinema Camera (BMMCC), Micro Studio Camera 4K (BMMSC 4K) and the original Pocket Cinema Camera HD(BMPCC). They cannot be attached to any other M43 cameras such as JVC, Olympus or Panasonic cameras and they are not compatible with the newly released Blackmagic Pocket Cinema Camera 4K (BMPCC4K). The 0.58x Speed Booster SUPER16 reduces the crop factor of the Blackmagic Design cameras with Super 16mm sensor size from 3.02x to 1.75x and produces the largest aperture optics currently available, with a maximum output aperture of f/0.74. Here are a few examples: Optical Canon EF mount lens to M43 mount camcorders, specific for Blackmagic Design cameras with Super16mm sensor size.Increase maximum aperture by 1 2/3stop. (with a maximum output aperture of f/0.74).Increase MTFMakes lens 0.58x wider.Patented 6-element/4-group optical design by Caldwell Photographic in the USA. Electronic Lens iris/aperture is set by the controls on the camera body.Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lens models.Image stabilization (IS) lens support.Push autofocus if supported by camera.Electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L).Cinema EOS lens support (CN-E 18-80mm T4.4 L), including AF (requires external 5V power via micro USB port), auto iris and servo zoom.Powered by camera body. With most lenses, no external power source required. Mechanical The tripod foot is detachable and compatible with Arca Swiss, Markins and Photo Clam ball heads.Flocking to reduce internal reflection.Rubber gasket protects M43 mount connection from dust and moisture.Aluminum alloy and brass construction with chromium plating.Satin surface finish Compatibility List of Lens Canon EF-mount Lens Canon EF-Extender (Teleconverter)Canon EOS Cinema (CN-E) LensCarl Zeiss EF-mount LensSigma EF-mount LensTamron EF-mount LensTokina EF-mount LensContax N mount lenses modified to Canon EF by ConurusContax 645 NAM-1 adapter modified to Canon EF by Conurus Unsupported List  Standard M43 camera. When this Speed Booster® is used with other MFT camera, it may cause damage to the camera.Tokina opera 50mm F/1.4 FFLens correction such as peripheral shading, CA and distortion Focus confirmation "chip" (e.g. Dandelion) M42 screw mount adaptersStacking non-Metabones/non-Conurus mount adapters on top (see note 5 and list of lenses which require modification below.) Compatibility List of Camera BlackMagic Pocket Cinema CameraBlackMagic Micro Cinema Camera BlackMagic Micro Studio Camera 4K BlackMagic Studio Camera 4K BlackMagic Studio Camera

Metabones Canon EF to MFT T T ULTRA 0.71x Speed Booster Adapter SKU: MB_SPEF-M43-BT4 The new Metabones Speed Booster ULTRA 0.71x Adapter m43 uses an advanced 5-element 4-group optical design incorporating ultra-high index tantalum-based optical glass.  However, the new design is specifically optimized for the Micro Four Thirds sensor and filter stack, and as a result achieves an astonishing level of performance that sets a new standard for focal reducers. Like the revolutionary original Metabones Speed Booster® announced in January 2013, the Speed Booster ULTRA m43 has a magnification of 0.71x, and so it effectively reduces the crop factor of mirrorless Micro Four Thirds mount cameras from 2.0x to 1.4x.  However, the new ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology, and as a result is almost perfectly corrected for use with all fullframe SLR lenses regardless of aperture.  The Speed Booster ULTRA m43 will also work extremely well with many DX and APS-C format lenses provided the image circle of the lens is large enough.  Optical performance of the new Speed Boosters is so good that the MTF of any lens attached to it will be improved.  Even the latest generation of ultra-high performance SLR lenses such as the Zeiss Otus series can be improved by adding a Speed Booster ULTRA m43. New in Metabones Speed Booster ULTRA for Canon EF Mount to Micro Four Thirds is autofocus on Panasonic camera bodies, subject to certain limitations (see table above for details). We are pleased to report that Panasonic Micro Four Thirds camera bodies are capable of autofocusing accurately even if the maximum aperture of the Speed Booster and the lens combined is in the sub-f/1.0 range. Although our first and foremost priority is accuracy, we are able to make great strides in autofocus speed as well, which is significantly faster than a DSLR Four Thirds lens on a Panasonic Micro Four Thirds camera (with adapter), or our E-mount offerings on Sony cameras prior to Alpha 7R II. Autofocus Lens Compatibility List AccurateCanon EF20-35mm f/3.5-4.5 USMCanon EF24-105mm f/4L IS USMCanon EF35-80mm f/4-5.6Canon EF40mm f/2.8 STMCanon EF50mm f/1.2L USMCanon EF50mm f/1.4 USMCanon EF70-200mm f/2.8L IS II USMCanon EF70-300mm f/4-5.6L IS USMCanon EF85mm f/1.2L II USMCanon EF100mm f/2.8 USM macroSigma 18-35mm f/1.8 DC ArtSigma 18-125mm f/3.8-5.6 DC HSMTamron SP 24-70mm f/2.8 Di VC USD A007Tamron SP 70-200mm f/2.8 Di VC USD A009Tokina AT-X PRO 11-16mm f/2.8 DXIIAccurate only on newer cameras such as Panasonic G7Canon EF70-200mm f/4L USMCanon EF135mm f/2L USMCanon EF200mm f/2.8L II USMInaccurateCanon EF50mm f/1.8 IISigma 50mm f/1.4 EX HSMManual focus onlyContax N lenses modified by ConurusTamron SP 17-50mm f/2.8 VC B005Zeiss ZE lenses List of manual focus lenses which REQUIRE MODIFICATION to be used on Speed Booster Leica RSuper-Elmar-R 15mmElmarit R 28/2.8Elmarit R 35/2.8Summicron R 50/2Nikon F20/2.8 AI-SOlympus OMOM 18/3.5OM 21/2OM 21/3.5OM 28/2.8OM 50/1.8Pentax KEvery Pentax K-mount lens has a protruding fin and an aperture lever. It does NOT fit.

Metabones Canon EF to MFT Speed Booster XL 0.64x SKU: MB_SPEF-m43-BT3 A new Micro-4/3 mount Speed Booster adapter designed exclusively for the Panasonic GH4 and other selected Micro Four Thirds cameras with a magnification of 0.64x. The Metabones Speed Booster XL 0.64x uses an advanced 6-element optical design to achieve extraordinary optical performance at apertures up to an incredible f/0.80, a new record for Micro Four Thirds format.  The new Speed Booster XL 0.64x reduces the full-frame crop factor of the Panasonic GH4 from 2.0x to 1.28x, thus effectively transforming these cameras into APS-H format. When the GH4 is used in Cinema 4k video mode the horizontal full frame crop factor is reduced from 2.34x to 1.50x, thus effectively transforming the GH4 into a super-35 format 4k cine camera. In addition, the speed of any attached lens is increased by 11/3 stops, with a maximum output aperture of f/0.80 when an f/1.2 lens is used. For example, a 50mm f/1.2 becomes a 32mm f/0.80, which is the fastest aperture available for full size Micro Four Thirds formatSupports Panasonic GH4, GH3, G3, G5, G6, G10, GF3, GF5, GF6, GX1, Olympus E-PL7Blackmagic Cinema Camera with Micro Four Thirds mount, Blackmagic Pocket Cinema Camera Speed Booster XL 0.64x Specifications Magnification:  0.64xCrop Factor for Full Micro Four Thirds format:  1.28xCrop Factor with GH4 in Cinema 4k (4096 x 2160) Video Mode:  1.5xMaximum Output Aperture:  f/0.80 (with f/1.2 lens attached)Rectilinear Distortion:  < 0.8%Lens Elements/Groups:  6/4Length Reduction:  6.2 mmCamera Mount:  Micro Four ThirdsImage Format:  17.3 mm x 13.0 mm (full Micro Four Thirds format)

Metabones Canon EF to RF-mount T CINE Speed Booster ULTRA 0.71x SKU: MB_SPEF-EFR-BT2 Metabones EF-RF Speed Booster ULTRA 0.71x - to adapt Canon EF mount full-frame lenses to the new Canon RF mount. Filmmakers are now able to mitigate most of the 4k video crop factor of  EOS R (1.75x) and EOS RP (1.63x) and reduce it to 1.24x and 1.15x respectively and support the newly EOS C70(Super 35mm sensor). The field of view is now much closer to still photo mode. This new Speed Booster is not intended for still photography but will work if the camera is configured to APS-C mode. Optical Increase maximum aperture by 1 stop. (with a maximum output aperture of f/0.9).Increase MTFMakes lens 0.71x wider.Advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA (patent granted). Electronic Autofocus.  AF speed is properly adjusted to account for and leverage the shorter focal length and the brighter maximum aperture.Dual-pixel autofocus (DPAF) and video AF support.Focal length and aperture are adjusted in EXIF (see note 3).Image stabilization (IS) lens support.Store EXIF data (lens name, focal length and maximum/minimum aperture) for one manual lens in the adapter.Build-in multi-function Control Wheel (turn/ push-in) for assignable functions(eg. ISO, shutter speed or aperture control, depth-of-field preview).LED indicator shows communication status. Powered by camera body. With most lenses, no external power source required. Mechanical Patented positive-lock EF lens mount.The tripod foot is detachable and compatible with Arca Swiss, Markins and Photo Clam ball heads.Flocking to reduce internal reflection.Rubber gasket protects the RF mount connection from dust and moisture.Aluminum alloy and brass construction with chromium plating.Satin surface finish.

Metabones Canon EF to RF-mount T Speed Booster ULTRA 0.71x SKU: MB_SPEF-EFR-BT1 Metabones EF-RF Speed Booster ULTRA 0.71x - to adapt Canon EF mount full-frame lenses to the new Canon RF mount. Filmmakers are now able to mitigate most of the 4k video crop factor of EOS R (1.75x) and EOS RP (1.63x) and reduce it to 1.24x and 1.15x respectively. The field of view is now much closer to still photo mode. This new Speed Booster is not intended for still photography but will work if the camera is configured to APS-C mode. Optical Increase maximum aperture by 1 stop. (with a maximum output aperture of f/0.9).Increase MTFMakes lens 0.71x wider.Advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA (patent granted). Electronic Autofocus.  AF speed is properly adjusted to account for and leverage the shorter focal length and the brighter maximum aperture.Dual-pixel autofocus (DPAF) and video AF support.Focal length and aperture are adjusted in EXIF (see note 3).Image stabilization (IS) lens support.Store EXIF data (lens name, focal length and maximum/minimum aperture) for one manual lens in the adapter.Build-in multi-function Control Wheel (turn/ push-in) for assignable functions(eg. ISO, shutter speed or aperture control, depth-of-field preview).LED indicator shows communication status. Powered by camera body. With most lenses, no external power source required. Mechanical The tripod foot is detachable and compatible with Arca Swiss, Markins and Photo Clam ball heads.Flocking to reduce internal reflection.Rubber gasket protects the RF mount connection from dust and moisture.Aluminum alloy and brass construction with chromium plating.Satin surface finish.

Metabones Canon EF Lens to Sony E Mount T CINE Smart Adapter SKU: MB_EF-E-BT6 Metabones Canon EF Lens to Sony E Mount T CINE Smart Adapter is an adapter with following features New positive-lock EF lens mount. (Patent pending).Store EXIF data (lens name, focal length and maximum/minimum aperture) for up to 2 manual lenses in the adapter.If both your lens supports optical image stabilization (OIS) and your camera supports sensor-shift, in-body image stabilization (IBIS), the choice is yours on which one to use, or have both of them work in harmony.Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lenses.Custom function button (called Focus Hold button) assignable to more than 50 functions, such as Aperture Preview and Eye-AF, on A9, A7 series, A6500 and A6300.Dedicated switch controls in-body image stabilization (IBIS) on Sony cameras equipped with SteadyShot INSIDE.Sony E-mount teleconverter support.Compatible with Sony FS7 Mark II camera.Cinema EOS lens (CN-E Compact-Servo) support, including power zoom, AF and auto iris.Rubber gasket protects E-mount connection from dust and moisture.Detachable tripod foot, compatible with Arca Swiss, Markins and Photo Clam ball heads. Electronic AF-C tracking during high-speed drive at up to 10fps on Sony A9. (NOT applicable to A7R Mark III or A7 Mark III, refer to footnote number [x] of Sony's A7 Mark III press release for limitations.)Fast contrast-detection AF on all E-mount cameras (except AF-S/DMF with Sony A9).Pure phase-detection autofocus support on A9, A7RII, A7II, A6500 and A6300 (the fastest).Supports 5-axis in-body image stabilization of A7II, A7RII and A7SII. (Distance information from lens required; 3-axis IBIS if the lens does not transmit distance information.)Powered by camera body. No external power source required.LED indicator shows operation mode, OIS (optical image stabilization) activity and communication status.Efficient switched-mode power supply.Supports image stabilization (IS) lenses.Supports electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L)EXIF support (focal length, aperture, lens name)Distance and zoom display on VG and FS series camcorders, A9, A7 series, A6500 and A6300 (lens with distance information support required).Auto magnify (lens with distance information support required)Auto APS-C Size Capture" on full-frame cameras with Canon EF-S lenses and many third-party DX lenses. Optical/mechanical Felt material flocked inside the opening to reduce internal reflection.Fits both EF and EF-S lenses. (Vignetting at corners may occur with certain EF-S lenses because they are designed to cover a 1.6x crop image circle but Sony APS-C has a 1.5x crop factor.) Autofocus AF-C is supported on A9, A7RIII, A7III, A7RII, A7II, A6500 and A6300 only, and only in Green mode.Continuous video AF is functional in Advanced mode, but performance may be unsatisfactory.On Sony A9, only phase-detection autofocus is supported. Contrast-detection autofocus does not work. See firmware release notes for details.AF may not work if the maximum aperture of the lens plus any EF Extender or other teleconverter attached is smaller than f/8.The first two autofocus attempts are used to calibrate the lens and as a result may not lock successfully on the target. Half-press the shutter release button again and autofocus will lock successfully.Autofocus may have difficultly locking onto subjects which are very close to the nearest focusing distance of the lens.Sony E-mount 1.4x TC (model SEL14TC) will fit and work but AF performance may be unsatisfactory and there may be significant vignetting with some telephoto lenses.Autofocus accuracy depends heavily on the design and working condition of the lens. Lenses with hidden problems which may not be apparent on Canon DSLRs will lead to inaccurate and unreliable autofocus on Sony. Typical problems of this kind that we have seen include an unsmooth/erratic autofocus mechanism (e.g. getting stuck intermittently at a certain focusing distance), a faulty/worn-out distance encoder or other faulty/worn-out internal sensors. Other No support for lens corrections such as peripheral shading, CA and distortion.Use of Canon Compact-Servo Cinema lenses such as CN-E 18-80mm T4.4 for still photography is not supported. (Functional, but slower than lenses designed for still photography.)Some EF-mount lenses may make audible noises during iris changes and autofocus, which may be picked up by the built-in microphone of the camera during video recording. Use of an external microphone is advised. Some of the recently-introduced Canon-brand lenses are very quiet, however.Early Tamron VC lenses such as the AF 28-300/3.5-6.3 XR Di VC LD Aspherical [IF] Macro (model A20), AF 18-270/3.5-6.3 Di II VC LD Aspherical [IF] MACRO (model B003), SP AF 17-50mm F/2.8 XR Di II VC LD Aspherical [IF] (model B005) may not be able to freely switch between OIS and IBIS because they may not report IS activity status. Later Tamron VC lenses equipped with USD or PZD focus motors are fine.Some aftermarket battery grips may cause the aperture to change erroneously. This is a bug in the aftermarket battery grip but NOT arising from the Metabones Smart Adapter. Turn off the aftermarket battery grip or use a genuine Sony battery grip. Tested Camera Bodies A7III, A7RIII, A9, A7SII, A7RII, A7II, A7S, A7R, A7A6500, A6300, A6000, A5000PXW-FS5M2, PXW-FS7M2, PXW-FS5, PXW-FS7, NEX-FS700, NEX-FS100VENICE NEX-EA50, NEX-VG900, NEX-VG30, NEX-VG20, NEX-VG10NEX-7, NEX-6, NEX-5R, NEX-5N, NEX-5, NEX-C3, NEX-3

Metabones Canon EF Lens to Sony E Mount T CINE Speed Booster ULTRA 0.71x SKU: MB_SPEF-E-BT3 New optical design:  advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass to achieve extraordinary optical performance with improved corner sharpness, distortion and reduced vignetting. Speed Booster ULTRA has a magnification of 0.71x, and so it effectively reduces the crop factor of mirrorless cameras with DX-sized sensors, such as Sony E-mount and Fuji X-mount cameras, from 1.5x to 1.07x.  However, the new ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology, and as a result is well corrected for use with virtually all fullframe SLR lenses regardless of exit pupil distance. Thus, the Metabones Speed Booster ULTRA 0.71x performs extremely well with professional-grade f/2.8 zoom lenses such as the 24-70mm f/2.8 and 70-200mm f/2.8 zooms by Canon and Nikon to produce 17-50mm f/2.0 and 50-142mm f/2.0 high-speed zooms, respectively.  Similarly, high-speed fixed focal length lenses such as a 50mm f/1.2 will be transformed into a 35.5mm f/0.9 lens with excellent contrast and resolution from the center all the way to the edges of the image Optical/Mechanical Increase maximum aperture by 1 stop.Increase MTF.Makes lens 0.71x wider.Advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA (patent pending).A new positive-lock EF lens mount. (Patent pending).Rubber gasket protects E-mount connection from dust and moisture.Felt material flocked inside the opening to reduce internal reflection.Compatible with Sony FS7 Mark II camera.The tripod foot is detachable and compatible with Arca Swiss, Markins, Photo Clam ball heads. Electronic Fast contrast-detect AF on all E-mount cameras.Phase-detect autofocus support on A7RII, A7II, A6300 and A6500.Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lensesSupports 5-axis in-body image stabilization of A7II, A7RII and A7SII. (Distance information from lens required; 3-axis IBIS if lens does not transmit distance information.Dedicated switch controls in-body image stabilization (IBIS)Status notification LED light Powered by camera body. No external power source required.Aperture control from camera body.Custom function button assignable to more than 50 functions on A7 series, A6300 and A6500.High performance 32-bit processor and efficient switched-mode power supply.Supports image stabilization (IS) lenses.Supports electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L)EXIF support (focal length, aperture, zoom range)Distance and zoom display on VG and FS series camcorders, A7 series, A6300 and A6500 (lens with distance information support required).Auto magnify (lens with distance information support required)Auto "APS-C Size Capture" on full-frame cameras. Tested Camera Bodies A7SII, A7RII, A7II, A7S, A7R, A7A6500, A6300, A6000PXW-FS7M2, PXW-FS5, PXW-FS7, NEX-FS700, NEX-FS100NEX-EA50, NEX-VG900, NEX-VG30, NEX-VG20, NEX-VG10NEX-7, NEX-6, NEX-5R, NEX-5N, NEX-5, NEX-C3, NEX-3

Metabones Canon EF - Sony E Mount T Smart Adapter (Mark V) SKU: MB_EF-E-BT5 Metabones Canon EF Lens to Sony E Mount T Smart Adapter (Mark V) has following features AF-C tracking during high speed drive at up to 10fps on Sony A9.If both your lens supports optical image stabilization (OIS) and your camera supports sensor-shift, in-body image stabilization (IBIS), the choice is yours on which one to use, or have both of them work in harmony.Smooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lenses.Custom function button (called Focus Hold button) assignable to more than 50 functions, such as Aperture Preview and Eye-AF, on A9, A7 series, A6500 and A6300.Dedicated switch controls in-body image stabilization (IBIS) on Sony cameras eqipped with SteadyShot INSIDE.Sony E-mount teleconverter support.Compatible with Sony FS7 Mark II camera.Cinema EOS lens (CN-E) support, including power zoom, AF and auto iris.Rubber gasket protects E-mount connection from dust and moisture.Detachable tripod foot, compatible with Arca Swiss, Markins and Photo Clam ball heads. Tested Camera Bodies Sony A9, A7SII, A7RII, A7II, A7S, A7R, A7Sony A6500, A6300, A6000, A5000Sony PXW-FS7M2, PXW-FS5, PXW-FS7, NEX-FS700, NEX-FS100Sony NEX-EA50, NEX-VG900, NEX-VG30, NEX-VG20, NEX-VG10Sony NEX-7, NEX-6, NEX-5R, NEX-5N, NEX-5, NEX-C3, NEX-3

Metabones Canon EF Lens to Sony E Mount T Speed Booster ULTRA 0.71x II SKU: MB_SPEF-E-BT4 The Metabones Speed Booster ULTRA has a magnification of 0.71x, and so it effectively reduces the crop factor of mirrorless cameras with DX-sized sensors, such as Sony E-mount cameras and Fuji X-mount cameras, from 1.5x to 1.07x.  However, the new ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology, and as a result is well corrected for use with virtually all fullframe SLR lenses regardless of exit pupil distance. Thus, the Speed Booster ULTRA performs extremely well with professional-grade f/2.8 zoom lenses such as the 24-70mm f/2.8 and 70-200mm f/2.8 zooms by Canon and Nikon to produce 17-50mm f/2.0 and 50-142mm f/2.0 high-speed zooms, respectively.  Similarly, high-speed fixed focal length lenses such as a 50mm f/1.2 will be transformed into a 35.5mm f/0.9 lens with excellent contrast and resolution from the center all the way to the edges of the image. Metabones Exclusive Advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA (patent pending)AF-C tracking during high speed drive at up to 10fps on Sony A9If both your lens supports optical image stabilization (OIS) and your camera supports sensor-shift, in-body image stabilization (IBIS), the choice is yours on which one to use, or have both of them work in harmonySmooth iris support with the latest Canon (2009+), Tamron (SP series 2013+) and Sigma (2016+) lensesCustom function button (called Focus Hold button) assignable to more than 50 functions, such as Aperture Preview and Eye-AF, on A9, A7 series, A6500 and A6300Dedicated switch controls in-body image stabilization (IBIS) on Sony cameras eqipped with SteadyShot INSIDECompatible with Sony FS7 Mark II cameraCinema EOS lens (CN-E) support, including power zoom, AF and auto irisRubber gasket protects E-mount connection from dust and moistureDetachable tripod foot, compatible with Arca Swiss, Markins and Photo Clam ball heads Optical/Mechanical Increase maximum aperture by 1 stopIncrease MTFMakes lens 0.71x widerFelt material flocked inside to reduce internal reflection Electronic Fast contrast-detection AF on all E-mount cameras (except AF-S/DMF with Sony A9)Pure phase-detection autofocus support on A9, A7RII, A7II, A6500 and A6300 (the fastest)Supports 5-axis in-body image stabilization of A7II, A7RII and A7SII. (Distance information from lens required; 3-axis IBIS if lens does not transmit distance information.)Powered by camera body. No external power source requiredLED indicator shows operation mode, OIS (optical image stabilization) activity and communication statusEfficient switched-mode power supplySupports image stabilization (IS) lensesSupports electronic manual focusing (e.g. EF 85/1.2L II and discontinued EF 50/1.0L)EXIF support (focal length, aperture, lens name)Distance and zoom display on VG and FS series camcorders, A9, A7 series, A6500 and A6300 (lens with distance information support required)Auto magnify (lens with distance information support required)Auto "APS-C Size Capture" on full-frame cameras Tested Camera Bodies Sony A9, A7SII, A7RII, A7II, A7S, A7R, A7A6500, A6300, A6000, A5000PXW-FS7M2, PXW-FS5, PXW-FS7, NEX-FS700, NEX-FS100NEX-EA50, NEX-VG900, NEX-VG30, NEX-VG20, NEX-VG10NEX-7, NEX-6, NEX-5R, NEX-5N, NEX-5, NEX-C3, NEX-3

Metabones Canon EF to Sony FZ T CINE Smart Adapter SKU: MB_EF-FZ-BT1 Metabones T CINE Smart Adapter designed for dependable operation in the field, this new Smart Adapter™ features an extra large, geared iris ring and an easy-to-turn breech-lock to solidly secure the EF/EF-S mount lens. Electronic integration includes viewfinder display of aperture, zoom and distance, auto exposure, an assignable function button and image stabilization (IS) lens support. No additional power source is required. Adapter firmware is user-upgradable through the micro USB port on the Smart Adapter™. Color: Black Satin exterior; Black Matte flocking material interiorCamera Compatibility: Sony CineAlta FZ mount camerasLens compatibility: EF and EF-S mount lensesDimensions: 120 mm x 120 mm x 50 mmWeight: 704 g Electronic Viewfinder display of aperture, zoom and distance (Distance display requires lens which supports distance information)Auto exposureAssignable function buttonSupports image stabilization (IS) lensesPower is supplied by camera body. No external power source is requiredAdapter firmware is user-upgradable through the built-in micro USB port Optical/mechanical Extra-large, geared iris ringSecure breech-lock for locking the EF/EF-S mount lens solidlyFlocking material is coated inside the opening to reduce internal reflection Tested Camera Bodies Sony CineAlta F3 / F5 / F55 Tested Lenses Canon EF PrimesEF 40/2.8 STM EF 50/1.2 L USM EF 50/1.8 II EF 85/1.2 L II USM EF 100/2.8 USM EF 135/2L EF 200/2.8 L II Canon EF zooms EF 28-80/3.5-5.6 II  EF 35-80/4-5.6 EF 70-200/2.8L IS USM II EF 70-200/4L USM EF 70-200/4-5.6L IS USM EF 70-300/4-5.6L IS USM EF Extender 1.4x III, EF 70-200/4 L USMCanon EF-S>EF-S 17-35/2.8 IS USM EF-S 18-55/3.5-5.6 IS II Sigma 50/1.4 EX DC HSM 50/1.4 DG HSM 17-35/2.8-4 EX DG HSM 18-35/1.8 DC HSM ART 18-125/3.8-5.6 DC OS HSM Tamron SP 17-50/2.8 SP 24-70/2.8 SP 70-200/2.8 Tokina DX AT-X PRO SD 11-16

Metabones Canon FD to Fuji X Speed Booster ULTRA 0.71x SKU: MB_SPFD-X-BM3 Like the revolutionary original Metabones Speed Booster announced in January 2013, the Speed Booster ULTRA has a magnification of 0.71x, and so it effectively reduces the crop factor of mirrorless cameras with DX-sized sensors, such as Sony E-mount and Fuji X-mount cameras, from 1.5x to 1.07x.  However, the new ULTRA design makes very effective use of exotic materials at the furthest limit of glassmaking technology, and as a result is well corrected for use with virtually all fullframe SLR lenses regardless of exit pupil distance. Thus, the Metabones Speed Booster ULTRA performs extremely well with professional-grade f/2.8 zoom lenses such as the 24-70mm f/2.8 and 70-200mm f/2.8 zooms by Canon and Nikon to produce 17-50mm f/2.0 and 50-142mm f/2.0 high-speed zooms, respectively.  Similarly, high-speed fixed focal length lenses such as a 50mm f/1.2 will be transformed into a 35.5mm f/0.9 lens with excellent contrast and resolution from the center all the way to the edges of the image. Key Features Increase maximum aperture by 1 stop.Increase MTF.Makes lens 0.71x wider. Advanced 5-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA (patent pending).The tripod foot is detachable and compatible with Arca Swiss, Markins, Photo Clam ball heads.

Metabones Contarex to Sony NEX Adapter MB_CX-E-BM1 Both camera-side and lens-side of the adapter are made of brass, precision-machined and plated with chromium.Satin surface finish - just like your OEM lens and camera mounts.Precise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lens.Designed to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements. Metabones adapters have the following additional features True electronic integration of aperture diaphragm - let camera automatically choose aperture in P or S exposure modes, or dial in yourself on the camera body in A or M modes.EXIF data such as lens identification, focal length and aperture.

Metabones Contax 645 to Fujifilm G-mount Smart Adapter SKU: MB_C645-FG-BM1 Owners of legendary Carl Zeiss optics in Contax 645 Mount now have a trusted migration path to mirrorless cameras with Metabones Contax 645 to Fujifilm GFX Smart Adapter. Get the ergonomic experience of the original Contax 645 camera by using the lens' own aperture ring in aperture priority and manual exposure modes. Fully automatic exposure and shutter priority are also available. A customizable button on the E-Mount variant can be assigned to more than 50 different functions on many Sony cameras, including depth-of-field preview. A tripod foot compatible with Arca-Swiss-style quick release is included. Metabones has a proven track record of firmware stability and timely firmware support. Firmware is user-upgradable via the Smart Adapters' micro USB ports. All Metabones Smart Adapters relay distance information from the lens to the camera body to enable 5-axis in-body image stabilization (IBIS). The Contax 645 Makro-Planar 4/120 lens does not report distance information and supports only 3-axis in-body image stabilization. Compatible Lens List Vario-Sonnar T* 4,5/45-90Distagon T* 3,5/35Distagon T* 2,8/45Distagon T* 3,5/55Planar T* 2/80Apo-Makro-Planar T* 4/120Sonnar T* 2,8/140Sonnar T* 4/210Apo-Teletessar T* 4/350Mutar 1.4x T* Tested Cameras Fujifilm GFX 50S, GFX 50R and GFX 100

Metabones Contax 645 Lens to Sony E-mount Smart Adapter SKU: MB_C645-E-BM1 Owners of legendary Carl Zeiss optics in Contax 645 Mount now have a trusted migration path to mirrorless cameras with Metabones Contax 645 to Sony E-Mount Smart Adapter.  Get the ergonomic experience of the original Contax 645 camera by using the lens' own aperture ring in aperture priority and manual exposure modes. Fully automatic exposure and shutter priority are also available. A customizable button on the E-Mount variant can be assigned to more than 50 different functions on many Sony cameras, including depth-of-field preview. A tripod foot compatible with Arca-Swiss-style quick release is included. Metabones has a proven track record of firmware stability and timely firmware support. Firmware is user-upgradable via the Smart Adapters' micro USB ports. All Metabones Smart Adapters relay distance information from the lens to the camera body to enable 5-axis in-body image stabilization (IBIS). The Contax 645 Makro-Planar 4/120 lens does not report distance information and supports only 3-axis in-body image stabilization. Compatible Lens List Vario-Sonnar T* 4,5/45-90Distagon T* 3,5/35Distagon T* 2,8/45Distagon T* 3,5/55Planar T* 2/80Apo-Makro-Planar T* 4/120Sonnar T* 2,8/140Sonnar T* 4/210Apo-Teletessar T* 4/350Mutar 1.4x T* Supported cameras PDAF support A1, A9 II, A9, A7R V, A7R IV, A7R III, A7R II, A7S III, A7 IV, A7III, A7II, A7C A6600, A6500, A6400, A6300.Contax 645 lenses are not compatible with contrast-detection autofocus mirrorless cameras - no AF support for E-Mount cameras other than the models listed above. IBIS support (full 5-axis in-body image stabilization) A1, A9 II, A9, A7R V, A7R IV, A7R III, A7R II, A7 IV, A7 III, A7 II, A7S III, A7C, A6600, A6500The Contax 645 Makro-Planar 4/120 lens does not report distance information and supports only 3-axis in-body image stabilization

Metabones Hasselblad V to Fujifilm G CINE Speed Booster ULTRA 0.71x SKU: MB_SPHV-FG-BM1 The new Speed Booster Ultra 0.71x is an ideal match for 6x6 Hasselblad V lenses since they can now be fully utilized as they were originally designed when mounted to the Fuji GFX. Unlike 35mm format lenses used on the Fuji GFX via glassless adapters, Hasselblad V lenses adapted to the GFX via the Speed Booster Ultra are completely free of disturbing vignetting and other corner issues. In addition to increasing the field of view and lens speed, the new Speed Booster Ultra achieves superb performance by being carefully matched to the unique optical characteristics of the Hasselblad V lenses. All of the Hasselblad V lenses were analyzed for exit pupil size and location, and this was fully taken into account in the new Speed Booster Ultra for the Fuji GFX. This approach dictated the use of extremely large lens elements throughout in order to avoid vignetting and maintain high-quality imagery into the corners, but the results speak for themselves. Like all Metabones Speed Boosters, the Hasselblad-V to GFX Speed Booster Ultra is optimized to fully account for the camera’s filter stack located near the sensor surface. This is especially critical when using high-speed optics like the 110mm f/2, which becomes a high-performance 78mm f/1.4. In addition to superb optical performance, the Hasselblad-V to GFX Speed Booster Ultra is equipped with an extremely robust cine-style positive locking mechanism to ensure that no play occurs during focusing. This is especially important when using Hasselblad V lenses for cine work because even though they provide a very smooth focus movement, they tend to require more torque than lesser lenses. The new Ultra also includes a very sturdy 360-degree rotation collar and extra length Arca Swiss style tripod mounting plate. MB_SPHV-FG-BM1 Features Design for adapting Hasselblad V-mount Lens to Fuji GFX (G-mount) cameras.Makes lens 0.71x wider. Crop Factor for Fuji GFX format relative to 6x6 film format: 1.03x.Increase maximum aperture by 1 stop.Increase MTF.Patented 6-element/4-group optical design incorporating ultra-high index tantalum-based optical glass by Caldwell Photographic in the USA.Positive-lock V lens mount (patent granted).Lens Compatibility: Any Hasselblad V Mount lens. Cocking and firing of internal leaf shutters are not supported, but lenses with this feature are fully usable by using the Fuji GFX focal plane shutter.Aluminum Alloy and Brass Construction with Chromium Plating.Black Satin and Satin Chrome exterior; Black Matte interior.Detachable Arca Swiss-type quick release plate with 360-degree rotation collar.

Metabones Leica M lens to MFT adapter SKU: MB_LM-m43-BT2 Features Both camera-side and lens-side of the adapter are made of brass, precision-machined and plated with chromiumSatin surface finish - just like your OEM lens and camera mountsPrecise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lensDesigned to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elementsMetabones Smart Adapter series adapters have the following additional featuresTrue electronic integration of aperture diaphragm - let camera automatically choose aperture in P or S exposure modes, or dial in yourself on the camera body in A or M modesEXIF data such as lens identification, focal length and aperture

Metabones Leica R to BMCC Speed Booster MB_SPLR-BMCC-BM1 Leica-R to Micro-4/3 mount Speed Booster adapters designed exclusively for the Blackmagic 2.5k Cinema Camera (BMCC). Note that the new Speed Boosters will only attach to Blackmagic cameras equipped with a Micro-4/3 mount. They cannot be attached to standard Micro 4/3 cameras. The new 0.64x Speed Booster reduces the full-frame crop factor of the BMCC from 2.39x to 1.53x, thus effectively transforming it into a Super-35 format cine camera.  In addition, the speed of any attached lens is increased by 11/3 stops, with a maximum output aperture of f/0.80.  For example, a 50mm f/1.2 becomes a 32mm f/0.80, and Sigma’s new 18-35mm f/1.8 will become an 11.5-22.5mm f/1.1. Metabones Speed Booster Features Increase maximum aperture by 1 1/3 stop (with a maximum output aperture of f/0.80)Increase MTFMakes lens 0.64x widerOptics designed by Caldwell Photographic in the USA (patent pending)The tripod foot is detachable and compatible with Arca Swiss, Markins, Photo cam ball heads

Metabones Leica R to BMPCC Speed Booster MB_SPLR-BMPCC-BM1 Leica R to Micro-4/3 mount Speed Booster  adapters designed exclusively for the Blackmagic Pocket Cinema Camera (BMPCC). Note that this new 0.58x Speed Boosters will only attach to BMPCC equipped with a Micro-4/3 mount.  They cannot be attached to standard Micro 4/3 cameras. The new 0.58x Speed Booster reduces the crop factor of the BMPCC from 2.88x to 1.75x, and produces the largest aperture optics currently available, with a maximum output aperture of f/0.74. For example, a 50mm f/1.2 now becomes a 29mm f/0.74, and the Sigma 18-35mm f/1.8 becomes the world’s fastest zoom lens at 10.5-20.3mm f/1.0 with stunningly sharp performance. Metabones Speed Booster Features Increase maximum aperture by 1 2/3 stop. (with a maximum output aperture of f/0.74)Makes lens 0.58x widerIncrease MTFOptics designed by Caldwell Photographic in the USA (patent pending)The tripod foot is detachable and compatible with Arca Swiss, Markins, Photo cam ball heads

Metabones Nikon F to Sony E-mount T Adapter III SKU: MB_NF-E-BT3 All Metabones Adapters follow this tradition of uncompromising precision, robust build quality and outstanding finish. Features Both camera-side and lens-side of the adapter are made of brass, precision-machined and plated with chromiumSatin surface finish - just like your OEM lens and camera mountsPrecise fit and solid connection - lens has no play, gap or wiggling when mounted on adapter and no adjustments are required to fit your lensDesigned to reach infinity focus while maintaining the correct registration distance required to maintain optical quality of CRC lenses or lenses with floating elements

Metabones Nikon G Lens to L-mount AdapterSKU: MB_NFG-L-BM1 Nikon F mount lens to Leica/ Panasonic/ Sigma L-mount cameras Compatible with both Nikkor G lens & F lens (include non-AI & AI lens mounts) Industry's best aperture clickless ring covers an 8-stop range marking, clearly indicating actual number off-stops. No more guesswork. (Patent granted) Aluminum Alloy and Brass Construction with Chromium Plating Rubber gasket protects the L-mount connection from dust and moisture Satin Surface Finish Detachable Arca-Type tripod foot compatible with Arca Swiss, Markins, and Photo Clam ball heads(clamp directly or attach to quick release plate by a 1/4"-20 screw) Compatibility Lenses Nikkor F-mount lens Unsupported List Nikkor E series lens, the diaphragm blades are not operated by mechanical linkage levers, such as Nikkor 105mm f/1.4E, Nikkor AF-S 70-200mm f/2.8E FL ED VR, Nikkor AF-S 16-80mm f/2.8-4E ED DX VR, and Nikkor AF-S 24-70mm f/2.8E ED VR, Nikkor AF-S 600mm f/4E FL ED VR and PC-E 19mm, 24mm, 45mm, 85mm T/S Lens, etc.NoteThis adapter is manual aperture control. It does NOT support electronic aperture control, AF and image stabilization.

Metabones Nikon G to BMCC Speed Booster SKU: MB_SPNFG-BMCC-BM1 Technical data Model Code MB_SPNFG-BMCC-BM1Color Black MattMagnification 0.64xCrop Factor with BMCC 1.53xMaximum Output Aperture f/0.80 (with f/1.2 lens attached)Rectilinear Distortion < 0.35%Lens Elements/Groups 6/4Length Reduction 5.7 mmCamera Mount Blackmagic Micro 4/3 onlyLens Mounts Nikon FLens Compatibility Both FX and DX format lenses can be usedSpecial Features Improved long-throw clickless Nikon G aperture ringDimensions 174 mm x 66 mm x 33 mmWeight 177 gramsTripod Mount Robust removable type with Arca Swiss compatibility

Metabones Nikon G to BMPCC Speed Booster SKU: MB_SPNFG-BMPCC-BM1 Technical data Model Code Metabones Speed Booster MB_SPNFG-BMPCC-BM1Color Black MattMagnification 0.58xCrop Factor with BMPCC 1.75xMaximum Output Aperture f/0.74 (with f/1.2 lens attached)Rectilinear Distortion < 0.5%Lens Elements/Groups 6/4Length Reduction 8.0 mmCamera Mount Blackmagic Pocket Micro 4/3 onlyLens Mounts Nikon FLens Compatibility Both FX and DX format lenses can be usedSpecial Features Improved long-throw clickless Nikon G aperture ringDimensions 74 mm x 66 mm x 32 mmWeight 160 gramsTripod Mount Robust removable type with Arca Swiss compatibility

Metabones Nikon G to BMPCC4K Speed Booster ULTRA 0.71x SKU: MB_SPNFG-m43-BM4 The new Speed Booster ULTRA 0.71x for BMPCC4K uses an advanced 6-element 4-group optical design incorporating ultra-high index tantalum-based optical glass.  The new design is specifically optimized to bring the same level of astonishing performance as the ULTRA Speed Boosters for Micro Four Thirds to users of the Blackmagic Pocket Cinema Camera 4K. In particular, the Speed Booster ULTRA 0.71x is optimized to correctly account for the BMPCC4K camera’s specific filter stack located near the sensor surface. This is especially critical at the extremely large apertures made possible by Speed Booster technology. As a result of this careful optimization, an enormous range of full-frame optics, ranging from vintage film lenses to the latest digital designs, will function flawlessly when adapted to BMPCC4K bodies. The Metabones Speed Booster ULTRA 0.71x reduces the crop factor of the BMPCC4K camera as shown in the above table. The new design for BMPCC4K makes very effective use of exotic materials at the furthest limit of glassmaking technology, and as a result is almost perfectly corrected for use with all full-frame SLR lenses regardless of aperture or exit pupil distance.  The Speed Booster ULTRA 0.71x will also work extremely well with many DX and APS-C format lenses, provided the image circle provided by the lens is large enough. Optical performance of the new Speed Boosters is so good that the MTF of any lens attached to it will be improved. Even the latest generation of ultra-high performance SLR lenses such as the Zeiss Otus series can be improved by adding a Speed Booster ULTRA 0.71x. Features Nikon F mount lens to Blackmagic Design cameras with M43 mount, specific for BMPCC4K.Compatible with both Nikkor G lens &  F lens (include non-AI & AI lens mounts).Patented 6-element/4-group optical design by Caldwell Photographic in the USA.Increase maximum aperture by 1-stop. (with a maximum output aperture of f/0.9).Increase MTF.Makes lens 0.71x wider.Industry's best aperture clickless ring covers an 8-stop range marking, clearly indicating actual number off-stops. No more guesswork. (Patent granted).Rubber gasket protects M43 mount connection from dust and moisture.Aluminum alloy and brass construction with chromium plating.Satin surface finish.Detachable tripod foot compatible with Arca Swiss Style ball head, such as Markins and Photo Clam or attach to quick release plate by a 1/4"-20 screw.The tripod foot is tailor-made to match the exact height as the BMPCC4K camera body. Compatible Cameras BlackMagic Pocket Cinema Camera 4KBlackMagic Pocket Cinema Camera HD (original ver.)BlackMagic Micro Cinema Camera BlackMagic Micro Studio Camera 4K BlackMagic Studio Camera 4K BlackMagic Studio Camera

Metabones Nikon G to BMPCC4K Speed Booster XL 0.64x SKU: MB_SPNFG-m43-BM5 This Speed Booster XL 0.64x adapter has been designed exclusively for the Blackmagic Pocket Cinema Camera 4K, with a magnification of 0.64x. The Speed Booster XL 0.64x uses an advanced 7-element optical design to achieve extraordinary optical performance at apertures up to an incredible f/0.80. The new Metabones Speed Booster XL 0.64x reduces the full-frame crop factor of the BMPCC4K as shown in the table further above. In addition, the speed of any attached lens is increased by 1 1/3stops, with a maximum output aperture of f/0.80 when an f/1.2 lens is used.  For example, a 50mm f/1.2 becomes a 32mm f/0.80, which is the fastest aperture available for Blackmagic cameras. Just like the Metabones Speed Booster ULTRA 0.71x for BMPCC4K, the Speed Booster XL 0.64x is optimized to correctly account for the BMPCC4K camera’s specific filter stack located near the sensor surface. This is especially critical at the extremely large apertures made possible by Speed Booster technology.  As a result of this careful optimization, an enormous range of full-frame optics, ranging from vintage film lenses to the latest digital designs, will function flawlessly when adapted to BMPCC4K bodies. In fact, most lenses will have significantly improved MTF when used with the Speed Booster, compared to using them with a plain (i.e. “glassless”) adapter on Blackmagic cameras. MB_SPNFG-m43-BM5 Features Nikon F mount lens to Blackmagic Design cameras with M43 mount, specific for BMPCC4K.Compatible with both Nikkor G lens &  F lens (include non-AI & AI lens mounts).Patented 7-element/4-group optical design by Caldwell Photographic in the USA.Increase maximum aperture by 1 1/3 stop. (with a maximum output aperture of f/0.8).Increase MTF.Makes lens 0.64x wider.Industry's best aperture clickless ring covers an 8-stop range marking, clearly indicating actual number off-stops. No more guesswork. (Patent granted).Rubber gasket protects M43 mount connection from dust and moisture.Aluminum alloy and brass construction with chromium plating.Satin surface finish.Detachable tripod foot compatible with Arca Swiss Style ball head, such as Markins and Photo Clam or attach to quick release plate by a 1/4"-20 screw. The tripod foot is tailor-made to match the exact height as the BMPCC4K camera body. Compatible Cameras BlackMagic Pocket Cinema Camera 4KBlackMagic Pocket Cinema Camera HD (original ver.)BlackMagic Micro Cinema Camera BlackMagic Micro Studio Camera 4K BlackMagic Studio Camera 4K BlackMagic Studio Camera