Porta Brace RIG-EVA1XT The Cargo Case Camera Edition has an ultra-light design, featuring dual-rigidity foam for maximum equipment protection.  The Porta Brace RIG-EVA1XT has been designed to add extra height to this case to accomodate your equipment needs in a better manner.  It is designed to Panasonic AU-EVA1 setups up to 21.75" long . This rugged case is constructed using long-life materials including 1000-denier Cordura® nylon and solid steel clip rings. Reversed zippers and a slip-not anti-skid waterproof bottom panel are used for increased water-resistancy and durability. Features Ultra-light designDual-rigidity foam for maximum equipment protectionRugged construction and long-life materialsGenuine suede comfort shoulder strap and handlesSlip-not anti-skid & waterproof bottom panelExtra added height Dimensions Interior: 55.9 cm x 24.1 cm x 27.9 cmExterior: 59.7 cm x 29.2 cm x 33.0 cmWeight: 2.9 kg In the box 1 x CS-B9 Cam-Corder Stuff Sack1 x CS-CR-CINCH Cam-Corder Cinch1 x CS-CR-U Cam-Corder Universal Cradle1 x DVO-HP Hanging Pocket1 x HB-10 Suede Shoulder Strap1 x WBC White Balance Card

Porta Brace RS-22The RS-22 Rain Slicker is a rain / dust cover for various professional or broadcast camcorders. It is made from 3-ply nylon and Fabuthane with a soft tricot-backed lining. There are flaps, clear vinyl windows and zippers to access camcorder controls. Around the lens is a non-slip, grip material to seal out the elements. It has a detachable front visor and a rain-fly for extra coverage in inclement weather. There is a large pocket for lens cap, cleaning tissue white balance card etc. The top opens to reach the camcorder handle or attach an optional shoulder strap. 3-ply nylon and FabuthaneSoft tricot-backed liningHook and Loop closureFlaps, clear vinyl windows and zippers to access camcorder controls and LCD screenExpandable back end for large "brick" battery, Firestore unit, wireless mic receiversLarge pocket for lens cap, cleaning tissue white balance card etcQuick change battery backNon-slip group material around the lensDetachable front visorRain-fly for extra coverage Equipment CoveredSony PDW-850

Porta Brace RS-33 The Porta Brace RS-33 is one of several special Rain Slickers for MICROWAVE TRANSMITTERS. Place a small hole in the special neoprene seal area for exact antenna location. The RAIN SLICKER Camera Case has improved steadily over the past 20 years. When squared lens shades became the standard, it allowed to put a neoprene gasket around the shade to hold firmly and keep water out. The removable Porta-Brace shade has a form fitting plastic material, which you can bend and shape to fit, making it more difficult for rain to reach the lens. The series of zipper slides at the base allows you to quickly and easily cover the camera even with large batteries and wireless microphones. It works on the tripod or on your shoulder and access is made easy with clear vinyl windows, flaps and zippered openings. The material is a special combination of two fabrics and two types of waterproofing. Features 3-ply Nylon, Fabuthane with soft tricot-backed protectionAmple vinyl viewing windowsAmple vinyl viewing windows and accessDetachable front visor forms to square shadesDetachable front visor, triple zip bottomEasier to put on the cameraQuick Change Battery BackQuick Change Battery Back and wireless micsRain-Fly for extra coverageUse on or off the tripodside pocket for lens cap & wipeswater/dust/snow,sun protectionWeight: 1.50 lb / 0.68 kg Dedicated for Hitachi Z-3000JVC GY-DV5000U, JVC GY-DV5100U, JVC KY-19, JVC KY-27, JVC KY-29Panasonic AG-DVC200, Panasonic AG-DVC200P, Panasonic AJ-D200, Panasonic AJ-D210, Panasonic AJ-D215, Panasonic AJ-D410Philips BTS LDK-10, Philips BTS LDK-20, Philips BTS LDK-23HSSony DSR-250, Sony DSR-300, Sony DSR-370, Sony DSR-390, Sony DSR-400, Sony DSR-450, Sony DSR-500, Sony DSR-570, Sony DSR-590, Sony PDW-F330, Sony PDW-F335, Sony PDW-F350, Sony PDW-F355

Porta Brace RS-33VTHMade from waterproof nylon Taslan material, the Porta Brace RS-33VTH Rain Slicker protects your shoulder-mount camera from inclement weather conditions. An expandable back end extends that protection to batteries and onboard wireless transmission hardware. The Taslan material is complemented by a layer of soft Tricot which cushions the camera and reduces outside noise. Although the case covers the camera, the Taslan material is breathable and prevents overheating from suffocation of the camera's vents. Camera controls are completely visible through clear vinyl windows, while touch-fastened openings are placed strategically for full access to controls without compromising weather resistance. To prevent water seepage around the lens, an adjustable neoprene gasket creates a tight seal at the mount, while an included detachable visor adds extra protection from droplets that may otherwise attach to the front element. Waterproof and breathable nylon Taslan materialExpanded back end accommodates wireless video transmittersLarge clear vinyl windows provide visibility of controlsCan be used shoulder-mountable or on tripodNeoprene lens gasket grips tight to keep water out around lensProtects Shoulder-Mount CamerasExtra Space for Transmitters and BatteryManufactured from Waterproof TaslanTricot Interior Reduces Outside NoiseBreathable Taslan Prevents OverheatingVisible Controls + Touch Fastener AccessNeoprene Gasket Seal at Lens MountIncludes Detachable Lens Visor CompatibilityPanasonic AG-HPX300 Panasonic AG-HPX301 Panasonic AG-HPX370 Panasonic AG-HPX600 Panasonic AK-HC931 Sony PDW-F335 Sony PDW-F350 Sony PDW-F355 Sony PMW-320 Sony PMW-350

Porta Brace RS-AGCX350The RS-AGXC350 is a custom-fit rain and dust cover for the Panasonic AG-CX350 camera. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera and reduces noise during operation. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Clear Vinyl windows are used to provide unobstructed visibility of camera controls. Velcro-sealed openings are carefully placed to provide full access to controls and power supply without allowing water to seep in. The anti-skid rubber lens gasket creates a tight seal around around the camera lens. 2 clear vinyl windowsWaterproof and breathable materialTight fit around lensUse shoulder-mount, hand-held, or tripod-mount DimensionsWeight: 0.23 kgEquipment CoveredPanasonic AG-CX350

Porta Brace RS-ALEXA35NThe RS-ALEXAN Custom-fit Rain Cover Kit for ARRI Alexa 35 Camera Protect your ARRI Alexa 35 Camera against the unpredictable elements with our tailor-made rain cover. Experience unimpeded shooting, come rain or shine. Why Choose Our Rain Cover Tailor-made for ARRI Alexa 35: Our cover is specifically designed for the ARRI Alexa 35, ensuring a snug and perfect fit every time. The cover s open design allows for fast deployment in changing weather environments. A vent let s hot air from the Alexa fan flow out from the side of the case, keeping the camera cool without sacrificing protection from rain.High-Quality Material: Hand-crafted in Bennington, VT (USA), the cover is made using waterproof and breathable tricot-lined Taslan nylon material. This guarantees top-notch protection while maintaining your camera s breathability, ensuring zero condensation build-up.Crystal Clear Vision: Featuring clear vinyl windows, this cover lets you effortlessly view and access your camera's controls, so your workflow isn't disrupted by Mother Nature.Versatile Lens Coverage: We understand that lenses come in various sizes. Our cover offers 3 distinct lens cover lengths, suitable for most prime lenses and video lenses like the 19-90. Switch between lenses with ease, knowing each one gets the protection it deserves.Custom-fit Viewfinder Cover: Whether you prefer using the eyepiece or the LCD screen, our custom-fit viewfinder cover offers seamless functionality. Enjoy unhindered viewing, always.Secure Top Seal: Designed with the user in mind, the top of the cover securely seals around the handle, offering a full, confident grip on your camera and ensuring safety while working in light showers.Quick-Release Rain Fly: For those unexpected heavy downpours, our cover is equipped with a Quick-Release Rain Fly. With a swift motion, unfold it to shield the handle, offering maximum protection when you need it the most.Adaptable Back End Design: The back end of our cover is as versatile as your shooting needs. Extend it for larger battery setups or fold it up for compactness, ensuring optimal protection always.Convenient Carry Pouch: A handy zippered waterproof pouch is included to keep your RS-ALEXA35N organized when not in use. Go Shoot-Ready With our custom-fit rain cover for the ARRI Alexa 35, never let unpredictable weather conditions interrupt your creative flow. Secure, functional, and built with the cinematographer in mind, this cover is a must-have for every outdoor shoot. Adjusts to accomodate battery and recorder configurations Multiple access points for a variety of input/output connections Top access for mounted accessories Accommodates a variety of lens types, including Matte Boxes. Includes long-lens cover attachment.DimensionsWeight: 0.34 kgEquipment CoveredARRI Alexa 35 Camera

Porta Brace RS-FS5 Rain Slicker for Sony PXW-FS5MK2 Custom-fit rain & dust protective cover for Sony FS-5MK II The Porta Brace RS-FS5MK II Rain Slicker is a custom cover designed to protect your Sony PXW-FS5 from rain, dust, and snow. The RS-FS5MK II is made from triple-layer, tricot-finished nylon, with touch fastener flaps and zippered openings provided for additional protection. The Porta Brace RS-FS5MK2 features clear vinyl windows so you can view all camera controls and a quick change battery back for swapping batteries without having to remove the rain slicker. RS-FS5MK2 features Clear vinyl windows3-ply nylon, fabuthane with soft tricot-backed protectionDetachable front visorTriple zip bottomQuick-change battery backRain-fly for extra coverageTight fit around lens hoodGrip material around lens hoodCamera remains tripod mountable Equipment covered Sony PXW-FS5MK IISony PXW-FS5K MK II

Porta Brace RS-FS7 Rain Slicker for Sony PXW-FS7 Custom-fit rain & dust protective cover for Sony FS7 The Porta Brace RS-FS7 Rain Slicker is a custom cover designed to protect your Sony PXW-FS7 from rain, dust, and snow. The RS-FS7 Rain Slicker is made from triple-layer, tricot-finished nylon, with touch fastener flaps and zippered openings provided for additional protection. The RS-FS7 Rain Slicker features clear vinyl windows so you can view all camera controls and a quick change battery back for swapping batteries without having to remove the rain slicker. Features Clear vinyl windows3-ply nylon, fabuthane with soft tricot-backed protectionDetachable front visorTriple zip bottomQuick-change battery backRain-fly for extra coverageTight fit around lens hoodGrip material around lens hoodCamera remains tripod mountable Equipment covered Sony PXW-FS7Sony PXW-FS7K

Porta Brace RS-FS7XL Rain Slicker for Sony PXW-FS7 SKU: RS-FS7XL The Compact HD Rain Slicker RS-FS7XL is custom fit to the Sony PXW-FS7 camera model. Velcro-sealed flaps, clear vinyl windows and zippered openings provide maximum protection and optimum ease of operation. Special triple-layer, tricot-finished, nylon is used around the body of the camera to repel water at the case surface.  Extended back-end to accomodate the XDCA-FS7. Cameras with fold-out video screens are shrouded with a black fabric hood that makes viewing LCD monitors easier on sunny days. RS-FS7XL features Clear vinyl windowsTriple-layered waterproof materialDetachable front visorQuick-change battery backRain-fly for extra coverageTight fit around lens hoodCamera remains tripod mountable

Porta Brace RS-FX30XLRKeep Your Sony FX30 Camera Safe from the Elements with Our Custom-Made Rain Cover The RS-FX30XLR Rain Cover for the Sony FX30 Camera with XLR Handle is a must-have accessory for any professional videographer or photographer. Designed and manufactured in Vermont, USA, this premium rain cover offers unparalleled protection for your Sony FX30 Camera while ensuring uninterrupted shooting in wet or windy weather conditions. Key Features Tailor-Made for the Sony FX30 Camera with XLR Handle: Our rain cover is custom designed to fit your Sony FX30 Camera and XLR Handle perfectly, providing full access to all buttons, dials, and ports without compromising protection.Superior Weather Protection: The PortaBrace Rain Cover is made from high-quality, waterproof materials that shield your camera from rain, snow, and dust, ensuring the longevity of your equipment and the quality of your footage.Breathable Design: Our rain cover features a unique, breathable design that allows for effective heat dissipation and minimizes condensation buildup.Quick and Easy Installation: The PortaBrace Rain Cover is easy to install and remove, allowing you to focus on capturing the perfect shot without wasting time fumbling with complicated covers.Made in the USA: PortaBrace is proud to design and manufacture our products in Vermont, USA, ensuring the highest quality and attention to detail in every rain cover we produce.Durable and Long-Lasting: Our rain covers are built to last, made from heavy-duty materials that withstand the wear and tear of everyday use in harsh environments.Dimensions Weight: 0.45 kg Equipment CoveredSony FX30 Camera with XLR Handle and Mic

Porta Brace RS-FX6 The RS-FX6 Rain Slicker is a custom-fit cover designed to protect your Sony FX6 from rain, dust, and snow. The cover is made using a triple-layer, tricot-finished nylon, with touch fastener flaps and water-proof zippered openings. It features clear vinyl windows so you can view all camera controls and a quick-change opening at the rear of the cover for swapping batteries without having to remove the Rain Slicker. The cover can be used on a tripod or hand-held. There is a clear vinyl viewfinder window and a "rain-fly" add-on mic cover and a small vinyl cover for the built-in mic. The top part of the cover can be opened to attach an external monitor or other rig components. The opening seals tight and folds over to prevent water from penetrating the cover. Features Clear vinyl windowsTriple-layered waterproof materialQuick-change battery backRain-fly for extra mic coverageDraw-string lens gripUse hand-held or with tripodFits lens sizes up to 8 inchesWeight: 0.45 kgEquipment Covered: Sony FX6

Porta Brace RS-FX6XLThe RS-FX6XL Rain Slicker is a custom cover designed to protect your Sony FX6 from rain, dust, and snow. It is made from triple-layer, tricot-finished nylon, with touch fastener flaps and zippered openings provided for additional protection. It features clear vinyl windows so you can view all camera controls and a quick change battery back for swapping batteries without having to remove the rain slicker. Clear vinyl windows3-ply nylon, fabuthane with soft tricot-backed protectionQuick-change battery backRain-fly for extra coverageTight fit around lens hood or matte boxCamera remains tripod mountable DimensionsWeight: 0.45 kgEquipment CoveredSony FX6 Full-Frame Cinema Camera

Porta Brace Rain Slicker for Sony PXW-FX9 RS-FX9 Rain Slicker is a custom cover designed to protect Sony PXW-FX9 from rain, dust, and snow. It is made from triple-layer, tricot-finished nylon, with touch fastener flaps and zippered openings provided for additional protection. It features clear vinyl windows so you can view all camera controls and a quick change battery back for swapping batteries without having to remove the rain slicker. RS-FX9 features Clear vinyl windows3-ply nylon, fabuthane with soft tricot-backed protectionDetachable front visorTriple zip bottomQuick-change battery backRain-fly for extra coverageTight fit around lens hoodGrip material around lens hoodCamera remains tripod mountable

Porta Brace RS-FX9XLThe Compact HD Rain Slicker RS-FX9XL is custom fit to the Sony PXW-FX9 camera model. Velcro-sealed flaps, clear vinyl windows and zippered openings provide maximum protection and optimum ease of operation. Special triple-layer, tricot-finished, nylon is used around the body of the camera to repel water at the case surface. Extended back-end to accomodate the XDCA-FS7.Cameras with fold-out video screens are shrouded with a black fabric hood that makes viewing LCD monitors easier on sunny days.Be sure to check the Equipment Covered tab to select the Rain Slicker for your camera. Clear vinyl windowsTriple-layered waterproof materialDetachable front visorQuick-change battery backRain-fly for extra coverageTight fit around lens hoodCamera remains tripod mountable DimensionsWeight: 0.45 kgEquipment CoveredSony PXW-FS7

Porta Brace RS-HCXFB80ENG The RS-HCXFB80ENG offers complete weather protection for stadium cameras with ENG-style lenses and flat-screen monitor displays. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves and interior pockets for holding air-activated hand warmers help keep the camera operator dry and warm. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. There is also a clear vinyl window at the rear of the Cloak that provides the camera operator with a full view of controls. Features Triple-layer, waterproof & breathable materialNew design fits flat-screen monitor displaysClear vinyl window for tally light and camera controlsRain and snow protection for stadium cameras with ENG lensesHelps keep camera operator dry and warm

Porta Brace RS-PXWX400Use the RS-PXWX400 Rain Slicker from Porta Brace to protect your Sony PXW-X400 from rain and dust. The waterproof exterior is made of nylon, while the interior is lined with a soft tricot material to help prevent unwanted scratches and smudges. The Taslan Nylon exterior is breathable, preventing your camera from overheating while it is covered. Clear vinyl windows and strategically placed openings for control access allow for easy operation without letting moisture in. The lens is further protected by a neoprene gasket. Features include a detachable front visor that conforms to square lens shades, and a rain fly for added coverage. Protects Sony PXW-X400 CamcorderWaterproof, Breathable Taslan ExteriorQuick-Change Access to Battery and MicsFront Visor Conforms to Square ShadesNeoprene Gasket Around LensClear Vinyl Viewing WindowsRain Fly for Added CoverageLined with Soft TricotMade in the USA

Porta Brace RS-PXWZ150 SKU: RS-PXWZ150 The RS-PXWZ150 Compact HD Rain Slicker (RS) is custom fit to the Sony PXW-Z150 camera model. Velcro-sealed flaps, clear vinyl windows and zippered openings provide maximum protection and optimum ease of operation. Special triple-layer, tricot-finished, nylon is used around the body of the camera to repel water at the case surface.  Cameras with fold-out video screens are shrouded with a black fabric hood that makes viewing LCD monitors easier on sunny days. RS-PXWZ150 Features 2 clear vinyl windows3-ply Nylon, Fabuthane with soft tricot-backed protectionDetachable front visor, triple zip bottomQuick Change Battery BackRain-Fly for extra coverage

Porta Brace RS-PXWZ280Rain Slickers for Sony cameras are a customized way to protect your Sony camera from rain, dust and snow. The Rain Slicker exterior layer is made from Nylon Taslan material and complemented by a soft tricot interior that won't scratch your equipment. The Taslan material is both waterproof (1000MM waterproof rating) and breathable (1000G/M breathability rating), which keeps the camera dry while also preventing the camera from overheating. The Rain Slickers have extra material that can be extended for additional protection. A clear Vinyl window provides an unobstructed view of the controls and a quick-change rear panel gives you easy access to the battery compartment. The detachable front visor keeps rain off the lens. A triple-zippered bottom makes tripod mounting easy. Sony Rain Slickers can also be used on the shoulder or hand-held. Waterproof and breathable Taslan material Clear Vinyl windows over control panel Quick-Change Battery Back Tripod, shoulder mount, or hand-heldWeight: 0.34 kgEquipment Covered: Sony PXW-Z280

Porta Brace RS-PXWZ750The RS-PXWZ750 Rain Slicker is a rain / dust cover for various professional or broadcast camcorders. It is made from 3-ply nylon and Fabuthane with a soft tricot-backed lining. There are flaps, clear vinyl windows and zippers to access camcorder controls. Around the lens is a non-slip, grip material to seal out the elements. It has a detachable front visor and a rain-fly for extra coverage in inclement weather. There is a large pocket for lens cap, cleaning tissue white balance card etc. The top opens to reach the camcorder handle or attach an optional shoulder strap. 3-ply nylon and FabuthaneSoft tricot-backed liningHook and Loop closureFlaps, clear vinyl windows and zippers to access camcorder controls and LCD screenExpandable back end for large "brick" battery, Firestore unit, wireless mic receiversLarge pocket for lens cap, cleaning tissue white balance card etcQuick change battery backNon-slip group material around the lensDetachable front visorRain-fly for extra coverage Equipment CoveredSony PDW-850

Porta Brace RS-URSABCENGThe Porta Brace Rain Cover and ENG Lens Protector for Blackmagic URSA Broadcast Camera is a custom-fit protective cover designed to keep rain and dust off your camera. It is made from nylon Taslan material with soft tricot-backed lining, and features clear vinyl windows for viewing camera controls. The lens is protected from water entry by a neoprene gasket and the removable front visor provides further shielding from rain. For added convenience, a touch-fastened sealed rear flap allows for easy battery changes. Nylon Taslan with soft tricot-backed protectionTaslan is both 1000MM waterproof and breathable, which keeps the camera dry while preventing overheatingClear vinyl windowsDetachable front visorRear touch fastener flap for quick battery changeTight fit around lens hood DetailsAccommodates Blackmagic URSA ENG/EFP CameraType of Closure Hook-and-LoopMaterial Nylon, Tricot, VinylWaterproof / Breathability Rating 1000 mm / 1000 g/m Weight 0.7 kg

Porta Brace RT-LED1X1The RT-LED1X1 Rain Cover protects LED light panels from rain and dust during field-use. The cover is constructed of waterproof Nylon Taslan, which also has a patented breathable design that allows heat from the light to escape to prevent overheating. A clear vinyl window allows the light to shine through unobstructed. Velcro-sealed access panels allow for easy access to lighting controls. Waterproof Taslan material Easy access to controls For use on a light-standEquipment Covered Dedolight FelloniLEDZ BRUTE 16LEDZ BRUTE 30Lite Panels 1X1Lite Panels Astra

Porta Brace SL-LENSThe SL-LENS is a carrying case designed for photographers who only need to carry a few essential accessories along with their camera lenses This case is designed to be easily loaded with a lens, a second prime or small zoom lens, extra battery, and possibly a camera flash or a small tripod. Along with the included padded shoulder strap, a second back-up strap is already sewn in to the case, in the event that the strap is lost or you need to travel even lighter and smaller. Backup StraConvenient Size for TravelHolds the essentialsProtection from the elementsShoot ReadyDimensions Weight: 1.09 kgInterior: 19.69 x 10.16 x 26.67 cmExterior: 33.02 x 15.24 x 30.48 cm Equipment Covered Blackmagic Design Cinema CameraBlackmagic Design Pocket CinemaCanon DSLR CamerasGoPro HEROGoPro Hero 2GoPro Hero 3Hasselblad DSLR CamerasMamiya DSLR CamerasNikon DSLR CamerasOlympus DSLR CamerasPanasonic DSLR CamerasPanasonic Lumix DMC-GH4Pentax DSLR CamerasSamsung DSLR CamerasSony DSLR Cameras Package Includes1x CS-CR-U.5 Half Cam-Corder Universal Cradle 1x CS-NEST-SM Small Nesting Pillow 1x HB-15 Mini-DV Camera Strap 1x PB-4LC 4" Padded Lens Cup

Porta Brace SLR-1B SKU: SLR-1B The Porta Brace SLR-1B SLR Camera Case is a durable case for field photography. There is a padded, rigid-frame interior with adjustable camera tie-down strap that secures your camera in place. A padded divider-kit system organizes and protects camera & accessories. Carry using the suede handles or comfortable shoulder strap. SLR-1B features Durable, rigid frameInterior divider kitCamera cradle stabilizing systemNon-skid, water-resistant bottom SLR-1B technical data Interior: 16.5 mm x 20.32 mm x 33.7cmExterior: 26.7 mm x 25.4 mm x 46.4cmWeight: 2.4kg Dedicated for Blackmagic Design Cinema CameraCanon DSLR CamerasCanon XC10Hasselblad DSLR CamerasIkonoskop A-Cam dllMamiya DSLR CamerasNikon DSLR CamerasOlympus DSLR CamerasPanasonic DSLR CamerasPentax DSLR CamerasSamsung DSLR CamerasSony DSLR Cameras In the box 1 x  CC-STUFFER Camera Case Stuffer Pillow1 x CS-CR-CINCH Cam-Corder Cinch4 x DIV-5X3 Bendable Dividers1 x DK-C26LENS Bendable Long Divider1 x HB-10 Suede Shoulder Strap1 x PB-BSMP Small Pillow For Internal Combo Case1 x PB-7LC 7-inch Padded Lens Cup1 x CARA-BRNZ Carabiner w/ Flashlight

Porta Brace SP-2BDesigned as an all-purpose tote bag, this medium-sized Sack Pack in black from Porta Brace allows you to carry several lighting or photography accessories.It is made with a double layer of 1000-denier Cordura fabric and has a foam-padded bottom, making it more durable than regular shopping bags and well-suited for carrying professional equipment.The spacious main compartment of the Sack Pack features interior dimensions of 40,64 x 17,78 x 38,10 cm and can be easily closed with a drawstring for safe transport. Complementing it are two external slip pockets,one on each side of the bag, which can be used to hold everyday items for easy access. The tote is comfortable to carry thanks to its lightweight design at only 0,77 kgand its dual carrying handles with soft grip. Durable all-purpose bag made for carrying compact professional gear, weighs only 0,77kgRugged 1000D Cordura fabric with foam padding on the bottom for added protectionMain compartment with interior dimensions of 40,64 x 17,78 x 38,10 cm, closes with drawstringTwo external slip pockets, one on each side of the bag, for everyday itemsDual straps available for transport, with soft grip handle for comfortable carryingAll-Purpose Bag for AccessoriesInterior Dimensions of 16 x 7 x 15"Durable 1000D Cordura ConstructionTwo Slip Pockets, One on Each Side