Porta Brace CC-HD1 The Porta Brace CC-HD1 QUICK-DRAW Camera Case is designed for working around town and out of a van or car trunk. The top loading case has a wide open fold back top that stays neatly out of the way. It's lightweight with a rigid frame and saves valuable storage space. Features Anti-skid material on base (inside and out)Dirt and skid resistant “slip-not” bottom panel for superior impact cushioningExpandable backFlared-wall design for matte boxesHeavy-Duty suede shoulder strapHeavy-gauge aluminum viewfinder protectionIncreased interior padding and cushioningInternal Plastic FrameLarge PocketsLeather handle and shoulder strap includedLight strip pocket included for working at nightLightweight alternative materialsNo-charge illumination & reflective logosPadded viewfinder protectionRedesigned viewfinder guard for extra protectionRemovable lid for easy access Dimmensions Weight: 11.00 lb / 4.99 kgInterior: 29" x 11.5" x 12" / 73.66cm x 29.21cm x 30.48 cmExterior: 31.5" x 14.5" x 14" / 80.01cm x 36.83cm x 35.56 cm What’s included 1 x WBC  White Balance Card1 x LH  Black Leather Handle1 x HB-40  Large Suede Shoulder Strap4 x CC-Stuffer  Detachable Foam Block

Porta Brace QUICK-DRAW Camera Case for Sony PXW-X400 SKU: CC-PXWX400B CC-PXWX400B QUICK-DRAW Camera Case is designed for working around town and out of a van or car trunk, with plenty of room for a lunch. The top loading case has a wide open fold back top that stays neatly out of the way. It's lightweight with a rigid frame and saves valuable storage space. Anti-skid material on base (inside and out)Expandable backFlared-wall design for matte boxesSuede shoulder strap includedHeavy-duty viewfinder protectionCC-PXWX400B compatibility Sony PDW-530Sony PDW-850Sony PXW-X320Sony PXW-X400Sony PXW-X500

Porta Brace CLK-2 The Porta Brace CLK-2 offers complete weather protection for stadium cameras with box lenses. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves help keep you dry and three (3) hand-warmer pockets in each sleeve maintain warmth to keep your arms and hands working the camera at cold, outdoor events. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. Features 3-layer, waterproof material All closures cinch tight for extra water protection Clear vinyl window for tally light Cold and rain protection for studio cameras Keep camera operator dry and warm Equipment covered Hitachi Triax Cameras Ikegami Triax Cameras Panasonic Triax Cameras Sony Triax Cameras

Porta Brace CLK-3ENGThe CLK-3ENG offers complete weather protection for stadium cameras with ENG-style lenses and flat-screen monitor displays. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed.Long sleeves and interior pockets for holding air-activated hand warmers help keep the camera operator dry and warm. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. There is also a clear vinyl window at the rear of the Cloak that provides the camera operator with a full view of controls. Triple-layer, waterproof and breathable material New design fits flat-screen monitor displays Clear vinyl window for tally light and camera controls Rain and snow protection for stadium cameras with ENG lenses Helps keep camera operator dry and warm

Porta Brace CLK-STUDIOCAM The CLK-STUDIOCAM offers complete weather protection for the Blackmagic Studio Camera. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves and interior pockets for holding air-activated hand warmers help keep the camera operator dry and warm. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. There is also a clear vinyl window at the rear of the Cloak that provides the camera operator with a full view of controls. Features Triple-layer, waterproof & breathable materialNew design fits flat-screen monitor displaysClear vinyl window for tally light and camera controlsRain and snow protection for stadium cameras with ENG lensesHelps keep camera operator dry and warm

Porta Brace CLK-URSABC The CLK-URSABC offers complete weather protection for URSA Broadcast stadium cameras with ENG-style lenses and flat-screen monitor displays. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves and interior pockets for holding air-activated hand warmers help keep the camera operator dry and warm. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. There is also a clear vinyl window at the rear of the Cloak that provides the camera operator with a full view of controls. Features Triple-layer, waterproof & breathable materialNew design fits flat-screen monitor displaysClear vinyl window for tally light and camera controlsRain and snow protection for stadium cameras with ENG lensesHelps keep camera operator dry and warm

Porta Brace CO-AB-M+The CO-AB-M+ ENG-Style Carry On Camera Bag has a large, versatile padded viewfinder guard with enough room to accommodate and protect larger color-viewfinders found on many ENG-style cameras. The new, double zipper Quick-Zip lid provides fast Shoot-Ready access to the camera and accessories inside the case. It also makes it easy to lift the camera out of the case without any snagging. The entire case has a minimum of one-inch (1.0 ) thick padded walls lined with soft Veltex material. Veltex is made of 100% nylon fabric with a polyester foam core and soft nylon tricot backing. There is also a movable anti-skid, Slip-Not , sleeve that provides extra stability for the camera inside the case. A nylon cinch-strap with strong plastic buckle wraps around the camera and helps keeps the camera in place during transport. The Veltex lining adheres to a padded divider (included) for creating an accessory compartment within the case. There is a 6-inch x 9-inch x 3-inch large exterior accessory pocket ideal for carrying extra batteries or other large accessories. Two (2) 10-inch x 8-inch slip-pockets line the back of the case for carrying cables, documents, or other small accessories. Two (2) interior mesh slip-pockets line the interior of the lid. FeaturesHeavy Duty Shoot Ready transport for ENG-style camerasLight-weight, one-inch thick soft-padded frame for maximum protectionGenuine-suede handles and shoulder strap for comfortable carrying1000d Cordura brand nylon and triple bonded nylon threads for rugged long-life construction and performance in harsh field conditionsSoft, padded viewfinder protectionLarge exterior pocket for carrying batteries or other accessories Abrasion-resistant Cordura material Semi-rigid, padded, lightweight frame Quick-zip, easy-access lid Suede pull and carry handles Viewfinder "bubble" for comfortable fit DimensionsInterior: without viewfinder bubble 72.39 x 24.13 x 35.56 cm Interior: WITH viewfinder bubble 72.39 x 35.56 x 35.56cm Exterior: 77,47 cm x 34,93 cm (without viewfinder bubble)Equipment CoveredENG style cameras. Please contact us for best fit Package Includes1x CC-STUFFER Camera Stabilizer Block 1x HB-1040 Heavy Duty Suede Shoulder Strap 1x WBC White Balance Card

Porta Brace CO-AB-MB+The CO-AB-MB+ ENG-Style Carry On Camera Bag has a large, versatile padded viewfinder guard with enough room to accommodate and protect larger color-viewfinders found on many ENG-style cameras. The new, double zipper Quick-Zip lid provides fast Shoot-Ready access to the camera and accessories inside the case. It also makes it easy to lift the camera out of the case without any snagging. The entire case has a minimum of one-inch (1.0 ) thick padded walls lined with soft Veltex material. Veltex is made of 100% nylon fabric with a polyester foam core and soft nylon tricot backing. There is also a movable anti-skid, Slip-Not , sleeve that provides extra stability for the camera inside the case. A nylon cinch-strap with strong plastic buckle wraps around the camera and helps keeps the camera in place during transport. The Veltex lining adheres to a padded divider (included) for creating an accessory compartment within the case. There is a 6-inch x 9-inch x 3-inch large exterior accessory pocket ideal for carrying extra batteries or other large accessories. Two (2) 10-inch x 8-inch slip-pockets line the back of the case for carrying cables, documents, or other small accessories. Two (2) interior mesh slip-pockets line the interior of the lid.FeaturesHeavy Duty Shoot Ready transport for ENG-style camerasLight-weight, one-inch thick soft-padded frame for maximum protectionGenuine-suede handles and shoulder strap for comfortable carrying1000d Cordura brand nylon and triple bonded nylon threads for rugged long-life construction and performance in harsh field conditionsSoft, padded viewfinder protectionLarge exterior pocket for carrying batteries or other accessories Abrasion-resistant Cordura material Semi-rigid, padded, lightweight frame Quick-zip, easy-access lid Suede pull and carry handles Viewfinder "bubble" for comfortable fit DimensionsInterior: 78,74 cm x 38,10 cm (without viewfinder bubble) x 20,32 cm Weight: 4.29 kgEquipment CoveredENG style cameras. Please contact us for best fit Package Includes1x CC-STUFFER Camera Stabilizer Block 1x HB-1040 Heavy Duty Suede Shoulder Strap 1x WBC White Balance Card

Porta Brace CO-OA-MB+The CO-OA-MB+ ENG-Style Carry On Camera Bag has a large, versatile padded viewfinder guard with enough room to accommodate and protect larger color-viewfinders found on many ENG-style cameras. The new, double zipper Quick-Zip lid provides fast Shoot-Ready access to the camera and accessories inside the case. It also makes it easy to lift the camera out of the case without any snagging. The entire case has a minimum of one-inch (1.0 ) thick padded walls lined with soft Veltex material. Veltex is made of 100% nylon fabric with a polyester foam core and soft nylon tricot backing. There is also a movable anti-skid, Slip-Not , sleeve that provides extra stability for the camera inside the case. A nylon cinch-strap with strong plastic buckle wraps around the camera and helps keeps the camera in place during transport. The Veltex lining adheres to a padded divider (included) for creating an accessory compartment within the case. There is a 6-inch x 9-inch x 3-inch large exterior accessory pocket ideal for carrying extra batteries or other large accessories. Two (2) 10-inch x 8-inch slip-pockets line the back of the case for carrying cables, documents, or other small accessories. Two (2) interior mesh slip-pockets line the interior of the lid. FeaturesHeavy Duty Shoot Ready transport for ENG-style camerasLight-weight, one-inch thick soft-padded frame for maximum protectionGenuine-suede handles and shoulder strap for comfortable carrying1000d Cordura brand nylon and triple bonded nylon threads for rugged long-life construction and performance in harsh field conditionsSoft, padded viewfinder protectionLarge exterior pocket for carrying batteries or other accessoriesDimensionsInterior: 78,74 x 38,10(without viewfinder bubble) x 20,32 cm Weight: 4.29 kgEquipment CoveredENG style camerasPackage Includes1x CC-STUFFER Camera Stabilizer Block 1x DVO-HP Hanging Pocket 1x HB-1040 Heavy Duty Suede Shoulder Strap 1x PC-LD Divider 1x PKT-2FB Detachable Pocket

Porta Brace CO-OB+ Featuring a corrugated plastic viewfinder guard compartment that helps protect your camera's viewfinder from shocks and knocks, this blue Porta Brace Padded Carry-On Camcorder Case with Reinforced Viewfinder Guard is a soft-sided camera bag designed to protect your camcorder during transport and storage. It holds the camera with lens and viewfinder attached, and features a 1000D Cordura nylon shell with interior padding that safely cushions your camcorder yet weighs only 2,49 kg. A removable padded lens support is included to help protect your lens or stop the camera body from shifting during transport. An integrated seat belt retainer strap comes in handy when transporting your gear on a car seat. The 1000D Cordura shell is abrasion-resistant and provides foul-weather protection. Two large front pockets feature hook-and-loop closure and are suitable for carrying larger spare items and cables when traveling locally. On the back of the case are two zippered mesh pockets perfect for holding papers or other slim items. An interior slip pocket is well suited for holding the included white balance card. The nylon mesh handles are covered in suede for durability and provide a soft griping surface. An included adjustable padded shoulder strap also features a suede covering. The bottom panel features a non-skid water-resistant bottom, and the exterior of the EVF compartment has an ID card window sewn into it. Case Type Soft Case Interior Dimensions (L x W x H): 66.04 x 15.24 x 33.02 cm Type of Closure: Hook-and-Loop, Zipper Carrying/Transport Options: Handle, Shoulder Strap Padding: Foam Material of Construction: Cordura Nylon, Plastic Airline Carry-On Compatible: Yes Exterior Dimensions (L x W x H): 69.85 x 17.78 x 35.56 cm Weight: 2.5 kg

Porta Brace CO-PC+ The blue Porta Brace Durable Padded Carrying Case with +Extra-Strength Viewfinder Guard is designed to carry and protect a professional or broadcast camera and accessories. It is a lightweight case with an interior pillowing system to cushion the camera. The case is made from water-resistant 1000D Cordura nylon with non-skid fabric on the bottom. It has extra-thick foam padded side walls for added protection. The case has two slip-in pockets, two exterior mesh pockets, and an ID window. There are colored tabs on each pocket flap for identification. A white balance card is included. The case is carried by suede leather-covered handgrips or a removable, adjustable shoulder strap with suede leather-covered pad. There is also a seat belt loop that secures the case to a car seat belt. Construction Water-resistant 1000D Cordura nylonNon-skid fabric on exterior bottomExtra-thick foam padded side wallsPoly-fill soft material on the interior wallsReinforced viewfinder protectorFull over-the-top, super-duty YKK zippers with protective Cordura covering Pockets Two slip pocketsTwo exterior mesh pocketsID windowColored tabs on pocket flaps Carrying options Suede leather-covered handgripsRemovable, adjustable shoulder strap with suede leather-covered padSeat belt loop secures case to car or airplane seat belt Technical data Case Type: Soft Case Interior Dimensions: 58.42 x 15.24 x 29.21 cm Type of Closure: Zipper Carrying/Transport Options: Handle, Shoulder Strap Material of Construction: Cordura Nylon ID Window: Yes Water Resistance: Water Resistant Airline Carry-On Compatible: Yes Exterior Dimensions: 60.96 x 17.78 x 33.02 cm Weight: 2.13 kg

Porta Brace CO-PCB+The CO-PCB+ ENG-Style Carry On Camera Bag has a large, versatile padded viewfinder guard with enough room to accommodate and protect larger color-viewfinders found on many ENG-style cameras. The new, double zipper Quick-Zip lid provides fast Shoot-Ready access to the camera and accessories inside the case. It also makes it easy to lift the camera out of the case without any snagging. The entire case has a minimum of one-inch (1.0 inch) thick padded walls lined with soft Veltex material. Veltex is made of 100% nylon fabric with a polyester foam core and soft nylon tricot backing. There is also a movable anti-skid, Slip-Not, sleeve that provides extra stability for the camera inside the case. A nylon cinch-strap with strong plastic buckle wraps around the camera and helps keeps the camera in place during transport. The Veltex lining adheres to a padded divider (included) for creating an accessory compartment within the case. There is a 6-inch x 9-inch x 3-inch large exterior accessory pocket ideal for carrying extra batteries or other large accessories. Two (2) 10-inch x 8-inch slip-pockets line the back of the case for carrying cables, documents, or other small accessories. Two (2) interior mesh slip-pockets line the interior of the lid. FeaturesHeavy Duty Shoot Ready transport for ENG-style camerasLight-weight, one-inch thick soft-padded frame for maximum protectionGenuine-suede handles and shoulder strap for comfortable carrying1000d Cordura brand nylon and triple bonded nylon threads for rugged long-life construction and performance in harsh field conditionsSoft, padded viewfinder protectionLarge exterior pocket for carrying batteries or other accessories Abrasion-resistant Cordura material Semi-rigid, padded, lightweight frame Quick-zip, easy-access lid Suede pull and carry handles Viewfinder "bubble" for comfortable fit Equipment CoveredENG style camerasPackage Includes1x CC-STUFFER Camera Stabilizer Block 1x HB-1040MG Heavy Duty Suede Shoulder Strap 1x WBC White Balance Card 1x CARA-BRNZ Carabiner Flashlight

Porta Brace CO-PXWZ750+ The CO-PXWZ750+ ENG-Style "Carry On" Camera Bag has a large, versatile padded viewfinder guard with enough room to accommodate and protect larger color-viewfinders found on many ENG-style cameras. The new, double zipper Quick-Zip™ lid provides fast Shoot-Ready® access to the camera and accessories inside the case.  It also makes it easy to lift the camera out of the case without any snagging. The entire case has a minimum of one-inch (1.0”) thick padded walls lined with soft Veltex® material.  Veltex® is made of 100% nylon fabric with a polyester foam core and soft nylon tricot backing. There is also a movable anti-skid, Slip-Not™, sleeve that provides extra stability for the camera inside the case.  A nylon cinch-strap with strong plastic buckle wraps around the camera and helps keeps the camera in place during transport.  The Veltex® lining adheres to a padded divider (included) for creating an accessory compartment within the case. There is a 6-inch x 9-inch x 3-inch large exterior accessory pocket ideal for carrying extra batteries or other large accessories.  Two (2) 10-inch x 8-inch slip-pockets line the back of the case for carrying cables, documents, or other small accessories.  Two (2) interior mesh slip-pockets line the interior of the lid. Features Heavy Duty "Shoot Ready"® transport for ENG-style camerasLight-weight, one-inch thick soft-padded frame for maximum protectionGenuine-suede handles and shoulder strap for comfortable carrying1000d Cordura® brand nylon and triple bonded nylon threads for rugged long-life construction and performance in harsh field conditionsSoft, padded viewfinder protectionLarge exterior pocket for carrying batteries or other accessories

Porta Brace CS-DC1R Digital Camera Carrying Case The Digital Camera Carrying Case protects and organizes the camera and the essential acceossories. The bottom panel is reinforced with 8 mm hollow core plastic, foam, and a layer of anti-skid material, which adds provides extra protection against water, dirt and grime with an easy wipe-off surface. 1” thick foam, 1000 denier Cordura Nylon with a generous coating of polyurethane waterproofing provides long lasting protection. The cradle inside is adjustable and stays where you put it to keep the camera from shifting. This Porta Brace CS-DC1R case has one large front zipper pocket with six slip pockets inside, and on the outside of the large zipper pocket is one mesh zipper pocket, on the opposite side of the case there is one large Velcro pocket with a slip pocket on the inside. Features Camera cradle stabilizing systemPadded lens cups to protect lensesDurable, 1000-denier Cordura constructionNon-skid bottom panel Compatible with Canon EOS 10D, 20D, 300D, 30D, 40D, 50D, 5D, 7D or similar Canon pro digital SLR cameras, lenses and accessoriesNikon D1, D100, D2, D200, D3, D300, D70, D700 or similar Nikon pro digital cameras lenses and accessoriesSimilar size other brand pro digital cameras with lenses and accessories Dimensions Weight 2.40 lb / 1.09 kgInterior 12.5" x 7" x 7" / 31.75 x 17.78 x 17.78 cmExterior 13" x 8" x 8" / 33.02 x 20.32 x 20.32 cm

Porta Brace CS-DC2R Soft-sided, padded, and lightweight. The NEW Universal Adjustable hold down CRADLE keeps the camera in place and of course, pockets for all the necessities. This Porta Brace CS-DC2R case comes with a Shoulder Strap, PB-B6 Pouch, PB-LCP-4 Lens Cup, Stuffer Block, Camera Cradle and Cinch Strap. Equipment covered Canon 10D,Canon 1D Mark IV,Canon 1Ti,Canon 20D,Canon 300D,Canon 30D,Canon 40D,Canon 50D,Canon 5D,Canon 5D Mark II,Canon 60D,Canon 7D,Canon T2i,Canon T3/1100D,Canon T3i/600Hasselblad H4D-200MSNikon D1,Nikon D100,Nikon D2,Nikon D200,Nikon D3,Nikon D300,Nikon D3000,Nikon D3100,Nikon D5000,Nikon D70,Nikon D700,Nikon D90Olympus E-5Panasonic Lumix DMC-GH2Pentax K-rSamsung NX100Sony Alpha a33,Sony Alpha a55,Sony Alpha a560,Sony Alpha SLT-A56V,Sony Alpha SLT-A77

Porta Brace CS-DV1ROur Compact HD Camera Cases protect your camera and organize the essential spare battery, tape, microphones and Quick-Slick rain cover. The bottom panel is reinforced with 8mm hollow-core plastic and a layer of non-skid material, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface. The body of the case is constructed of 1-inch thick foam and 1000-denier Cordura Nylon with a polyurethane water-resistant coating. There is a camera cradle inside to secure the camera during transport. A comfortable HB-15 shoulder strap is included. Easy-open, single zip with zipper guardCamera-cradle stabilizes cameraThick paddingSoft frameNon-skid bottom panel DimensionsInterior: 30.5 x 19.1 x 17.8 cm Exterior: 33 x 25.4 x 20.3 cm Weight: 1.81kgEquipment Covered Canon VIXIA Sony HDR-HC1 Sony HDR-SR5 SonyNEX-VG30EH Package Includes1x CS-B9 9" Padded Stuff Sack 1x CS-CR-CINCH Velcro Camera Cinch 1x CS-CR-U.5 Universal Camcorder Cradle 1x HB-15 Shoulder Strap

Porta Brace CS-DV3R This Compact HD Camera Case protect your camera and organize the essential spare battery, tape, microphones and Quick-Slick rain cover. The bottom panel is reinforced with 8 mm hollow-core plastic and a layer of non-skid material, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface. The body of the case is constructed of 1-inch thick foam and 1000-denier Cordura Nylon with a polyurethane water-resistant coating. There is a camera cradle inside to secure the camera during transport. Equipment covered Canon GL-1, Canon GL-2, Canon XA10, Canon XF300, Canon XF305, Canon XH-A1, Canon XH-G1, Canon XM-1, Canon XM-2JVC GY-DV300, JVC GY-HM100Panasonic AG-DVC80, Panasonic AG-DVC80H, Panasonic AG-DVX100, Panasonic AG-DVX100A, Panasonic AG-DVX100P, Panasonic AG-DVX102B, Panasonic AG-HVX200, Panasonic AG-HVX200A, Panasonic AG-HVX202Sony DCR-VX1000, Sony DCR-VX2000, Sony DCR-VX2100, Sony DSR-PD150, Sony DSR-PD170, Sony DSR-PDX10, Sony HXR-NX70u, Sony NEX-VG10 Dimensions Exterior (L xW x H) 20'' x 10''  x 9''  (50.8 cm x 25.4 cm x 22.86 cm)Interior (L xW x H) 18'' x 7'' x  8.5''  (45.72 cm x 17.78 cm x 21.59 cm)Weight 4 lb (1.81 kg)

Porta Brace CS-DV3UThe blue CS-DV3U Mini-DV Camera Case is a 1000-denier Cordura nylon case with 1.0 inch thick interior foam padding. It has a quick access main compartment with a CR Universal adjustable camera cradle that holds the camcorder securely in place on the bottom of the case. The case is designed to carry and protect various model Mini DV camcorders and accessories up to approximately 17 inch long. The CS-DV3U case has a removable, small, padded pouch, one large exterior pocket that holds a rain cover, cables etc. and a wide slip pocket for white balance card, owner's manual, maps, airline tickets, etc. A white balance card is included. The case is carried by two suede leather-covered hand grips or a removable, adjustable shoulder strap with suede leather-covered pad.Manufactured in Vermont, USA. Construction 1000 denier waterproofed Cordura nylon 1.0 inch thick foam padding Bottom panel is reinforced with 8mm hollow core plastic Slip Not fabric adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface Non-skid bottom panel Quick access main compartment and camera stabilizing cradle Pockets Removable, small padded pouch One large exterior pocket holds a rain cover (optional), cables etc Wide slip pocket for white balance card, owner's manual, maps, airline tickets, etc. White balance card is includedCarrying options Suede leather-covered hand grips Removable, adjustable shoulder strap with suede leather-covered pad D rings to attach shoulder strap Easy-open, single zip with zipper guardCamera-cradle stabilizes cameraThick paddingSoft frameNon-skid bottom panel DimensionsInterior: 45.72 x 17.78 x 21.59cm Exterior: 50.8 x 25.4 x 22.86cm Weight: 1.81kgPackage Includes1x CARA-BRNZ Carabiner w/ Flashlight 1x CS-B9 Cam-Corder Stuff Sack 1x CS-CR-CINCH Cam-Corder Tie Down 1x CS-CR-U Cam-Corder Cinch 1x HB-10M Suede Shoulder Strap 1x WBC White Balance Card

Porta Brace CS-DV4R The CAMERA CASE (CS-DV4R) is Black with RED trim. Porta Brace CS-DV4R protects and organizes the camera and the essential spare battery, tape, microphones and rain cover. The bottom panel is reinforced with 8mm hollow core plastic, foam layers and a NEW layer of Slip Not fabric, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface. 1'' thick foam, 1000 denier Cordura Nylon with a generous coating of polyurethane waterproofing provides long lasting protection. The cradle inside is adjustable and stays where YOU put it to keep the camera from shifting. Also included: One small, padded pouch, a suede shoulder strap and a white balance card. One large exterior pocket holds, Rain Cover, Cables, and a wide slip pocket for white balance card, owner’s manual, maps airline tickets, etc. Package includes 1 × CS-B9 9-inch Stuff Sack1 × CS-CR-U Camera Cradle1 × WBC White Balance Card1 × HB-10 Small Suede Shoulder Strap Equipment covered Canon GL-1, Canon GL-2, Canon XA10, Canon XF300, Canon XF305, Canon XH-A1, Canon XH-G1, Canon XM-1, Canon XM-2JVC GY-DV300, JVC GY-HM100Panasonic AG-DVC80, Panasonic AG-DVC80H, Panasonic AG-DVX100, Panasonic AG-DVX100A, Panasonic AG-DVX100P, Panasonic AG-DVX102B, Panasonic AG-HVX200, Panasonic AG-HVX200A, Panasonic AG-HVX202Sony DCR-VX1000, Sony DCR-VX2000, Sony DCR-VX2100, Sony DSR-PD150, Sony DSR-PD170, Sony DSR-PDX10, Sony HXR-NX70u, Sony NEX-VG10

Porta Brace CS-DV4UThe CS-DV4 camera case is designed to protect and organize your camera and essential accessories. The CS-DV4's unique opening has a single, durable YKK zipper that runs the entire length of the case to provide an extra-wide opening for easily removing and replacing the camera and other case contents.The CS-DV4 comes with multiple interior accessories all designed to improve the protection and organization of your equipment. There's a padded 9-inch stuff-sack with a soft nylon lining, perfect for protecting lenses or other delicate items. There's also a Camera Cradle and Tie-Down Cinch designed to secure your camera in place inside the case, even during rough travel conditions. A White Balance Card with convenient wrist strap and a comfortable suede shoulder strap are also included. Single-zip wide opening for easy access to cameraInterior accessories to secure camera in caseThick, soft padding and durable Cordura materialNon-skid, waterproof bottom panel DimensionsInterior: 54.61 x 20.32 x 25.4cm Exterior: 55.88 x 25.4 x 27.94cm Weight: 2.74kgEquipment Covered Canon C100 Canon XA10 Canon XA20 Canon XA25 Canon XF100 Canon XF105 Canon XF200 Canon XF205 Canon XF300 Canon XF305 JVC GY-HM150 JVC GY-HM600 JVC GY-HM650 JVC GY-HM70 JVC GY-HMQ10 JVC GY-HMZ1U Panasonic AG-3DA1 Panasonic AG-AC130 Panasonic AG-AC160 Panasonic AG-AC90 Panasonic AG-AF100 Panasonic AG-HMC150 Panasonic AG-HMC40 Panasonic AG-HPX170 Panasonic AG-HPX171 Panasonic AG-HPX250 Panasonic AG-HPX255 Panasonic AG-HVX200 Panasonic AJ-PX270 Panasonic HC-X1000 Panasonic HDC-Z10000 Sony FDR-AX1 Sony HDR-AX2000 Sony HDR-FX7 Sony HVR-A1U Sony HVR-Z5U Sony HVR-Z7U Sony HXR-NX3/1 Sony HXR-NX30 Sony HXR-NX5 Sony HXR-NX70 Sony NEX-EA50 Sony NEX-FS100 Sony NEX-FS700 Sony PMW-100 Sony PMW-150 Sony PMW-160 Sony PMW-200 Sony PMW-EX1 Sony PMW200 Sony PXW-X160 Sony PXW-X180 Sony PXW-X200 Sony PXW-X70 Sony PXW-Z100 Sony PXW-Z150

Porta Brace CSTAND-SLEEVEThe Portabrace CSTAND-SLEEVE is a lightweight, durable bag for transporting 1 or 2 c-stands. The bag can be carried using the comfortable suede-leather handles or the nylon shoulder strap with sure-grip shoulder padding. The CSTAND-SLEEVE is constructed using ballistic-grade 1000-denier Cordura nylon material with strong nylon straps and specialized sewing techniques that allow for carrying heavy loads. The bag lays flat and the single-zipper design gives you fast access to your stands or tripod. One end of the case is square-shaped and reinforced with corrugated plastic to provide a structured base. Durable, abrasion-resistant Cordura material Provides quick access to c-stands, umbrellas, or tripods Comfortable shoulder strap includedPackage Includes1 x 50" c-stand carrying sleeve 1 x HB-15 nylon shoulder strap

Porta Brace CTC-3The Porta Brace CTC-3 Traveler Camera Case (Black) is a 1000 denier Cordura nylon case specially designed to carry professional digital camcorders such as; Canon XH-A1, XH-G1, XL-2, XL-H1, JVC GY-HD251, Panasonic AG-HVX-200, Sony PMW-EX1, HVR-V1U, HVR-Z1U, PD-170,and other professional camcorders up to 22 inch long. There are reinforced layers of lightweight plastic and thick foam protects the camcorder from normal bumps and everyday handling. The Slip-not bottom adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface. The viewfinder cavity has an extra measure of protection for the viewfinder. The long pocket under the viewfinder area holds tapes, batteries and even some battery belts. The case has 1.0 inch thick foam padding, reinforced by plastic on the front and back sides. The CTC-3 has a zipper facing that has been added to keep the self-healing, heavy duty, YKK zippers from accidental damage (and if you leave the case out in the rain less water is likely to migrate into the main compartment).It has front pockets for extra batteries, tapes an AC power supply or ,tripod plate, rear zippered, mesh slip pockets airline tickets, maps, cable, white balance cards or other flat items, a large interior mesh slip pocket and a small mesh pocket for battery or cell phone.It is carried by a suede leather shoulder strap and suede covered handgrips. 1000 denier Cordura nylon fabric, rigid corrugated plastic, padded construction with 1.0 inch thick foam Foam block to help position the camera Slip-not bottom layer wipes clean easily and provides extra waterproof protection Full over-the-top twin super-duty zippers keep rain and debris from entering the case Armored plastic viewfinder protector Pockets Front pockets for extra batteries and tapes, AC power supply, tripod plate Foam-padded pockets Zippered, mesh rear slip pockets Internal large mesh slip pocket, small mesh pocket for battery or cell phone ID window Carrying options HB-10 Adjustable, removable, suede-leather shoulder strap Suede-covered dual carry handles Heavy-duty swivel clips Rings for carrying cable and alternate camera strap Seat belt loop Compatible with Canon XL-1, XL-1S, XL-2, XL-H1, XH-A1, XH-G1 camcorders JVC GY-DV500, GY-DV5000U, GY-DV5100U, GY-DV550, GY-DV600, GY-DV700 camcorders JVC GY-HD200, GY-HD100E, GY-HD100U, GY-HD101, GY-HD250, GY-HD251 camcorders Panasonic AG-DVC200, AG-DVC200P camcorders Panasonic AJ-D410 camcorder Panasonic AG-HVX-200 camcorder Sony DSR-300, DSR-301, DSR-370, DSR-500, DSR-570, DSR-590 camcorders Sony PD-150, PD-170 camcorders Sony HVR-V1U, HVR-Z1U camcorders Sony PMW-EX1 camcorder Most Pro camcorders up to 22 inch longFeatures For Various Camcorders up to 22" Long 1000 denier Cordura nylon case Reinforced Layers of Lightweight Plastic Thick Foam Interior Slip-not Bottom Suede Leather Shoulder Strap Suede Covered Handgrips. SpecificationCase Type: Soft Case Interior Dimensions: 55.88 x 16.51 x 26.67 cm Type of Closure: Zipper

Porta Brace CTC-3B The Traveler Camera Case series is specifically designed for cameras with ENG-style viewfinders. The Traveler has thick foam padding, reinforced by hollow-core plastic on the bottom and sides. A layer of non-slip, water-proof material has been added to the interior and exterior bottom panels of the case. The interior, along with the foam support block, stabilize the camera inside the case. The exterior wipes clean easily and provides extra water-proof protection. The armored plastic view finder protector Porta Brace CTC-3B provides extra support for fragile ENG-style viewfinders. The zipper-facing extends over the zipper to keep rain and debris from getting inside the case during transport. Six total pockets help you organize and protect batteries, tape stock, cables, filters, and your Portabrace Rain-Slicker.  Traveler cases fit many popular camera models such as Sony PMW-EX1, PMW-EX3, HVR-Z7Panasonic AG-HMC70JVC HD-100U, and many more Features ENG-stlye viewfinder protection1-inch thick padded, plastic-reinforced frameQuick-access zipper designLightweight, compact, protectiveMost sizes are airline overhead compatibleComes with "camera-stabilizing system"Constructed using long-lasting, durable materialsComfortable carrying strap included Dimensions Weight  5.10 lb / 2.31 kgInterior 22" x 6.5" x 10" / 55.88 cm x 16.51 cm x 25.40 cmExterior 24" x 11.25" x 12" / 60.96 cm x 28.58 cm x 30.48 cm

Porta Brace CTC-4B The Traveler Camera Case series is specifically designed for cameras with ENG-style viewfinders. The Traveler has thick foam padding, reinforced by hollow-core plastic on the bottom and sides. A layer of non-slip, water-proof material has been added to the interior and exterior bottom panels of the case. The interior, along with the foam support block, stabilize the camera inside the case. The exterior wipes clean easily and provides extra water-proof protection. The armored plastic view finder protector provides extra support for fragile ENG-style viewfinders. The zipper-facing extends over the zipper to keep rain and debris from getting inside the case during transport. Six total pockets help you organize and protect batteries, tape stock, cables, filters, and your Portabrace Rain-Slicker. Traveler cases fit many popular camera models such as: Sony PMW-EX1, PMW-EX3, HVR-Z7, Panasonic AG-HMC70, JVC HD-100U, and many more. Interior: 63.5 x 16.51 x 27.31cmExterior: 66.04 x 27.31 x 32.39cmWeight: 2.68kg In the box1x CARA-BRNZ Carabiner Flashlight1x CC-STUFFER Camera Stabilizer Block1x HB-1040 Heavy Duty Suede Shoulder Strap1x WBC White Balance Card Equipment coveredCanon XL-1, Canon XL-1S, Canon XL-2, Canon XL-H1JVC GY-DV500, JVC GY-DV5000U, JVC GY-DV5100U, JVC GY-DV550, JVC GY-DV600, JVC GY-DV700, JVC GY-HD100E, JVC GY-HD100U, JVC GY-HD101, JVC GY-HD200, JVC GY-HD250, JVC GY-HD251, JVC GY-HM700, JVC GY-HM700U, JVC GY-HM750, JVC GY-HM750U, JVC GY-HM790, JVC GY-HM790UPanasonic AG-DVC200, Panasonic AG-DVC200P, Panasonic AJ-D410,Sony DSR-300, Sony DSR-370, Sony DSR-500, Sony DSR-570, Sony DSR-590