HPRC HPRC6400W Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with internal protections or can be purchased empty. Perfect to carry tripodsergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomicsautomatic valve which automatically adjusts the air pressure insideinternal O-ring made of neoprene PA66 makes the case is totally waterproofClosing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fallreinforced corners that make it extremely shock-resistantMaterials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. Technical data internal dimension: 1081 x 279 x 242,8mmexternal dimension: 1128 x 335 x 299,8mmlid dimension: 112 mmbottom dimension: 131 mmWeight empty: 6,44 kgWeight with cubed foam: 7,84 kg

HPRC HPRC6400W Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with internal protections or can be purchased empty. Perfect to carry tripodsergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomicsautomatic valve which automatically adjusts the air pressure insideinternal O-ring made of neoprene PA66 makes the case is totally waterproofClosing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fallreinforced corners that make it extremely shock-resistantMaterials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. Technical data internal dimension: 1081 x 279 x 242,8mmexternal dimension: 1128 x 335 x 299,8mmlid dimension: 112 mmbottom dimension: 131 mmWeight empty: 6,44 kgWeight with cubed foam: 7,84 kg

HPRC RESIN CASE HPRC3600Rigid watertight, airtight backpack that can withstand falls.  Lightweight, watertight, drop-proof resin backpack. Compared to its predecessor, the HPRC3500, the HPRC3600 is designed for greater capacity and versatility of use. Made of TTX01 polypropylene plastic resin, it has an embossed surface to reduce scratches. The ergonomic backrest is made of antibacterial foam. The shoulder straps are adjustable and made of a breathable material to allow more comfort and quick evaporation of moisture. It has four side hooks, designed to attach straps for carrying additional accessories (helmets, tripods, etc.).Features30% more space than the HPRC3500 backpackmodern and essential design with clean, square lineslarger, impact-resistant name plate, more practical to use4 fasteners (two more than the HPRC3500 backpack)internal O-ring made of EPDM foam and makes the backpack totally watertightnew handle made of PP+ SEBS materials for greater ergonomics and gripautomatic valve that regulates the air pressure inside Dimensionsinternal: 479x354x194(mm)external: 542x402x220(mm)lid: 80(mm) / bottom: 114(mm) Weightempty: 3,22 kgwith foam: 3,85kg

HPRC RESIN CASE HPRC3600Rigid watertight, airtight backpack that can withstand falls.  Lightweight, watertight, drop-proof resin backpack. Compared to its predecessor, the HPRC3500, the HPRC3600 is designed for greater capacity and versatility of use. Made of TTX01 polypropylene plastic resin, it has an embossed surface to reduce scratches. The ergonomic backrest is made of antibacterial foam. The shoulder straps are adjustable and made of a breathable material to allow more comfort and quick evaporation of moisture. It has four side hooks, designed to attach straps for carrying additional accessories (helmets, tripods, etc.).Features30% more space than the HPRC3500 backpackmodern and essential design with clean, square lineslarger, impact-resistant name plate, more practical to use4 fasteners (two more than the HPRC3500 backpack)internal O-ring made of EPDM foam and makes the backpack totally watertightnew handle made of PP+ SEBS materials for greater ergonomics and gripautomatic valve that regulates the air pressure inside Dimensionsinternal: 479x354x194(mm)external: 542x402x220(mm)lid: 80(mm) / bottom: 114(mm) Weightempty: 3,22 kgwith foam: 3,85kg

HPRC RESIN CASE HPRC3600Rigid watertight, airtight backpack that can withstand falls.  Lightweight, watertight, drop-proof resin backpack. Compared to its predecessor, the HPRC3500, the HPRC3600 is designed for greater capacity and versatility of use. Made of TTX01 polypropylene plastic resin, it has an embossed surface to reduce scratches. The ergonomic backrest is made of antibacterial foam. The shoulder straps are adjustable and made of a breathable material to allow more comfort and quick evaporation of moisture. It has four side hooks, designed to attach straps for carrying additional accessories (helmets, tripods, etc.).Features30% more space than the HPRC3500 backpackmodern and essential design with clean, square lineslarger, impact-resistant name plate, more practical to use4 fasteners (two more than the HPRC3500 backpack)internal O-ring made of EPDM foam and makes the backpack totally watertightnew handle made of PP+ SEBS materials for greater ergonomics and gripautomatic valve that regulates the air pressure inside Dimensionsinternal: 479x354x194(mm)external: 542x402x220(mm)lid: 80(mm) / bottom: 114(mm) Weightempty: 3,22 kgwith foam: 3,85kg

HPRC RESIN CASE HPRC3600Rigid watertight, airtight backpack that can withstand falls.  Lightweight, watertight, drop-proof resin backpack. Compared to its predecessor, the HPRC3500, the HPRC3600 is designed for greater capacity and versatility of use. Made of TTX01 polypropylene plastic resin, it has an embossed surface to reduce scratches. The ergonomic backrest is made of antibacterial foam. The shoulder straps are adjustable and made of a breathable material to allow more comfort and quick evaporation of moisture. It has four side hooks, designed to attach straps for carrying additional accessories (helmets, tripods, etc.).Features30% more space than the HPRC3500 backpackmodern and essential design with clean, square lineslarger, impact-resistant name plate, more practical to use4 fasteners (two more than the HPRC3500 backpack)internal O-ring made of EPDM foam and makes the backpack totally watertightnew handle made of PP+ SEBS materials for greater ergonomics and gripautomatic valve that regulates the air pressure inside Dimensionsinternal: 479x354x194(mm)external: 542x402x220(mm)lid: 80(mm) / bottom: 114(mm) Weightempty: 3,22 kgwith foam: 3,85kg

HPRC ROM-2700W Ronin-M Case This watertight hard case for DJI Ronin-M features wheels and a retractable handle designed to make travel easy. Based on the HPRC2700W series, this version features a pre-cut foam interior that specifically holds: the DJI Ronin-M gimbal system; the transmitter; 3 x spare batteries: 2 x battery chargers; the tuning stand; a camera mounting plate; the handle bar; a 7” field monitor; cables and other miscellaneous accessories. The case is impact and drop resistant, corrosion resistant, and features a neoprene seal that when properly closed is designed to keep the case watertight and your gear protected even if submerged in shallow water. A release valve allows you to equalize air pressure when traveling between different elevations. The modular nature of the interior means that after you've stopped using the DJI Ronin-M you can repurpose this case by replacing the foam cutout with either the HPRCCF2700W foam or the HPRCSD2700W divider kit.

HPRC2600 PROTECTIVE CASE FOR DJI RS 4 PRO COMBOSKU: S-RS4-2600-01 Protect the performance of your DJI RS 4 Pro Combo with the S-RS4-2600-01. It’s ideal for transporting DJI RS 4 Pro Combo safely and conveniently. You'll be able to capture the images best suited to your storytelling, preserving versatility and the functionality of your gimbal while travelling. Based on the HPRC2600, it is designed to accommodate DJI's flagship stabilizer, so popular with cinematographers and videographers, and its accessories.Main featuresPerfect Compatibility: custom-designed for the DJI RS 4 Pro Combo and its componentsTotal Protection: TTX01® resin compound, offers exceptional resistance to impact, corrosion and weathering. IP67 certified, the case is watertight and dustproofCustomized Interiors: the interior features two pre-cut high-density foams to accommodate the gimbal and all accessories while ensuring order and protectionSecure Closure: the extremely robust latches are equipped with a two-stage opening/closing system: it ensures a particularly smooth movement while preventing the hooks from opening in the event of a fallComfort: thanks to its lightweightness and ergonomic handle, the case is handy and easy to carry anywhere Dimensioninternal dimension: 482,4x358,3x198,1 mmexternal dimension: 543,4x426,8x218,1 mmlid: 46mmbottom: 152mmWeight empty: 4,25kg

HPRC2300 for ATEM Mini / ATEM Mini Pro / ATEM Mini Pro ISO SKU: AMI-2300-01 AMI-2300-01 is the HPRC case based on the HPRC2300 model organized to protect and carry ATEM Mini, ATEM Mini Pro and ATEM Mini Pro ISO and their accessories. The foam can hold ATEM Mini/Mini Pro/Mini Pro ISO, Charger, Angelbird SSD2GO, Blackmagic ATEM Streaming Bridge, HDMI cables, Miscellaneous. Highly resistant and watertight rigid case to carry the ATEM Mini/Mini Pro/Mini Pro ISO in any place and weather. The Vector Panel increases the protection of the equipment stored and enables a quick and easy organization of the space. internal dimension: 305,7x232,4x137,5 mmexternal dimension: 334,6x303x155,2 mmlid: 31mmbottom: 106 mm

HPRC2500 for ATEM Mini Extreme / Atem Mini Extreme ISO SKU: AME-2500-01 AME-2500-01 is the HPRC case based on the HPRC2500 model designed to carry ATEM Mini Extreme or Atem Mini Extreme ISO with their accessories. The pre-cut foam houses ATEM Mini Extreme or Atem Mini Extreme ISO, Charger, Angelbird SSD2GO, Blackmagic ATEM Streaming Bridge, HDMI cables, Miscellaneous. Thanks to the lightness and the ergonomic handle, the case is very handy and easy to take anywhere. Ideal as hand luggage (approved cabin size). The case is also resistant to shocks, dust, acids and is watertight allowing you to transport your ATEM Mini Extreme or Atem Mini Extreme ISO in any place and atmospheric conditions. The Vector Panel increases the protection of the equipment stored and enables a quick and easy organization of the space. internal dimension: 449,8x322,9x174,9 mmexternal dimension: 478,1x389,4x194 mmlid: 46 mmbottom: 129 mm

HPRC HPRC2730W for DJI Ronin 4D-6K Combo SKU: R4D-2730W-01 R4D-2730W-01 is the HPRC case based on the HPRC2730W specifically designed to easily transport and protect DJI Ronin 4D-6K Combo and its accessories, fully assembled. It features a pre-cut high-density interior foam where the camera with all its accessories can be stored fully assembled. The foam can hold: DJI Ronin 4D Mounted, Charger, Lens DL 24/35/50 mm F2.8 LS, DL Mount, MRW-G1.SYM (Sony), DJI Prossd 1TB, DJI High-Bright Remote Monitor, DJI Zenmuse X9 Counterweight, CF Express Type B, NP-F970 (Sony), TB50 Intelligent Flight Battery and Various/Miscellaneous. The internal O-ring, which runs along the entire perimeter of the lid, is made of expanded EPDM and guarantees the case’s watertight qualities. Thanks to the lightweight, to the wheels and to the trolley stag, as well as resistant, the case is very easy to carry. The case is impact, drop and corrosion resistant. Lifetime guaranteed. The Vector Panel increases the protection of the equipment stored and enables a quick and easy organization of the space.

OConnor Foam Fitted Case C1234-1850 For 2575 & 2065 Head and Accessories. Dimmensions 43 cm x 48 cm x 37 cm

Porta Brace PB-4100F Hard case The Porta Brace PB-4100 Hard Case "Shoulder Bag" is a lightweight, waterproof, unbreakable case designed to be hand-carried or slung over your shoulder with an optional HB-15 shoulder strap. The case can be used to carry audio, photo or video equipment and accessories. It meets ATA 300 specifications for shipping cases. The hard resin shells are virtually unbreakable and the interior rubber O-ring keeps the case air and watertight. The case has an air pressure release valve. It is carried by a super-soft rigid grip handle. Weight: 6.60 lb / 2.99 kgInterior: 15.8" x 9.1" x 9.1" / 40.13 cm x 23.11 cm x 23.11 cmExterior: 16.7" x 11.2" x 10.9" / 42.42 cm x 28.45 cm x 27.69 cm