Porta Brace CS-DV4R The CAMERA CASE (CS-DV4R) is Black with RED trim. Porta Brace CS-DV4R protects and organizes the camera and the essential spare battery, tape, microphones and rain cover. The bottom panel is reinforced with 8mm hollow core plastic, foam layers and a NEW layer of Slip Not fabric, which adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface. 1'' thick foam, 1000 denier Cordura Nylon with a generous coating of polyurethane waterproofing provides long lasting protection. The cradle inside is adjustable and stays where YOU put it to keep the camera from shifting. Also included: One small, padded pouch, a suede shoulder strap and a white balance card. One large exterior pocket holds, Rain Cover, Cables, and a wide slip pocket for white balance card, owner’s manual, maps airline tickets, etc. Package includes 1 × CS-B9 9-inch Stuff Sack1 × CS-CR-U Camera Cradle1 × WBC White Balance Card1 × HB-10 Small Suede Shoulder Strap Equipment covered Canon GL-1, Canon GL-2, Canon XA10, Canon XF300, Canon XF305, Canon XH-A1, Canon XH-G1, Canon XM-1, Canon XM-2JVC GY-DV300, JVC GY-HM100Panasonic AG-DVC80, Panasonic AG-DVC80H, Panasonic AG-DVX100, Panasonic AG-DVX100A, Panasonic AG-DVX100P, Panasonic AG-DVX102B, Panasonic AG-HVX200, Panasonic AG-HVX200A, Panasonic AG-HVX202Sony DCR-VX1000, Sony DCR-VX2000, Sony DCR-VX2100, Sony DSR-PD150, Sony DSR-PD170, Sony DSR-PDX10, Sony HXR-NX70u, Sony NEX-VG10

Porta Brace CS-DV4UThe CS-DV4 camera case is designed to protect and organize your camera and essential accessories. The CS-DV4's unique opening has a single, durable YKK zipper that runs the entire length of the case to provide an extra-wide opening for easily removing and replacing the camera and other case contents.The CS-DV4 comes with multiple interior accessories all designed to improve the protection and organization of your equipment. There's a padded 9-inch stuff-sack with a soft nylon lining, perfect for protecting lenses or other delicate items. There's also a Camera Cradle and Tie-Down Cinch designed to secure your camera in place inside the case, even during rough travel conditions. A White Balance Card with convenient wrist strap and a comfortable suede shoulder strap are also included. Single-zip wide opening for easy access to cameraInterior accessories to secure camera in caseThick, soft padding and durable Cordura materialNon-skid, waterproof bottom panel DimensionsInterior: 54.61 x 20.32 x 25.4cm Exterior: 55.88 x 25.4 x 27.94cm Weight: 2.74kgEquipment Covered Canon C100 Canon XA10 Canon XA20 Canon XA25 Canon XF100 Canon XF105 Canon XF200 Canon XF205 Canon XF300 Canon XF305 JVC GY-HM150 JVC GY-HM600 JVC GY-HM650 JVC GY-HM70 JVC GY-HMQ10 JVC GY-HMZ1U Panasonic AG-3DA1 Panasonic AG-AC130 Panasonic AG-AC160 Panasonic AG-AC90 Panasonic AG-AF100 Panasonic AG-HMC150 Panasonic AG-HMC40 Panasonic AG-HPX170 Panasonic AG-HPX171 Panasonic AG-HPX250 Panasonic AG-HPX255 Panasonic AG-HVX200 Panasonic AJ-PX270 Panasonic HC-X1000 Panasonic HDC-Z10000 Sony FDR-AX1 Sony HDR-AX2000 Sony HDR-FX7 Sony HVR-A1U Sony HVR-Z5U Sony HVR-Z7U Sony HXR-NX3/1 Sony HXR-NX30 Sony HXR-NX5 Sony HXR-NX70 Sony NEX-EA50 Sony NEX-FS100 Sony NEX-FS700 Sony PMW-100 Sony PMW-150 Sony PMW-160 Sony PMW-200 Sony PMW-EX1 Sony PMW200 Sony PXW-X160 Sony PXW-X180 Sony PXW-X200 Sony PXW-X70 Sony PXW-Z100 Sony PXW-Z150

Porta Brace CTC-3The Porta Brace CTC-3 Traveler Camera Case (Black) is a 1000 denier Cordura nylon case specially designed to carry professional digital camcorders such as; Canon XH-A1, XH-G1, XL-2, XL-H1, JVC GY-HD251, Panasonic AG-HVX-200, Sony PMW-EX1, HVR-V1U, HVR-Z1U, PD-170,and other professional camcorders up to 22 inch long. There are reinforced layers of lightweight plastic and thick foam protects the camcorder from normal bumps and everyday handling. The Slip-not bottom adds an extra layer of protection against water, dirt and grime with an easy wipe-off surface. The viewfinder cavity has an extra measure of protection for the viewfinder. The long pocket under the viewfinder area holds tapes, batteries and even some battery belts. The case has 1.0 inch thick foam padding, reinforced by plastic on the front and back sides. The CTC-3 has a zipper facing that has been added to keep the self-healing, heavy duty, YKK zippers from accidental damage (and if you leave the case out in the rain less water is likely to migrate into the main compartment).It has front pockets for extra batteries, tapes an AC power supply or ,tripod plate, rear zippered, mesh slip pockets airline tickets, maps, cable, white balance cards or other flat items, a large interior mesh slip pocket and a small mesh pocket for battery or cell phone.It is carried by a suede leather shoulder strap and suede covered handgrips. 1000 denier Cordura nylon fabric, rigid corrugated plastic, padded construction with 1.0 inch thick foam Foam block to help position the camera Slip-not bottom layer wipes clean easily and provides extra waterproof protection Full over-the-top twin super-duty zippers keep rain and debris from entering the case Armored plastic viewfinder protector Pockets Front pockets for extra batteries and tapes, AC power supply, tripod plate Foam-padded pockets Zippered, mesh rear slip pockets Internal large mesh slip pocket, small mesh pocket for battery or cell phone ID window Carrying options HB-10 Adjustable, removable, suede-leather shoulder strap Suede-covered dual carry handles Heavy-duty swivel clips Rings for carrying cable and alternate camera strap Seat belt loop Compatible with Canon XL-1, XL-1S, XL-2, XL-H1, XH-A1, XH-G1 camcorders JVC GY-DV500, GY-DV5000U, GY-DV5100U, GY-DV550, GY-DV600, GY-DV700 camcorders JVC GY-HD200, GY-HD100E, GY-HD100U, GY-HD101, GY-HD250, GY-HD251 camcorders Panasonic AG-DVC200, AG-DVC200P camcorders Panasonic AJ-D410 camcorder Panasonic AG-HVX-200 camcorder Sony DSR-300, DSR-301, DSR-370, DSR-500, DSR-570, DSR-590 camcorders Sony PD-150, PD-170 camcorders Sony HVR-V1U, HVR-Z1U camcorders Sony PMW-EX1 camcorder Most Pro camcorders up to 22 inch longFeatures For Various Camcorders up to 22" Long 1000 denier Cordura nylon case Reinforced Layers of Lightweight Plastic Thick Foam Interior Slip-not Bottom Suede Leather Shoulder Strap Suede Covered Handgrips. SpecificationCase Type: Soft Case Interior Dimensions: 55.88 x 16.51 x 26.67 cm Type of Closure: Zipper

Porta Brace CTC-3B The Traveler Camera Case series is specifically designed for cameras with ENG-style viewfinders. The Traveler has thick foam padding, reinforced by hollow-core plastic on the bottom and sides. A layer of non-slip, water-proof material has been added to the interior and exterior bottom panels of the case. The interior, along with the foam support block, stabilize the camera inside the case. The exterior wipes clean easily and provides extra water-proof protection. The armored plastic view finder protector Porta Brace CTC-3B provides extra support for fragile ENG-style viewfinders. The zipper-facing extends over the zipper to keep rain and debris from getting inside the case during transport. Six total pockets help you organize and protect batteries, tape stock, cables, filters, and your Portabrace Rain-Slicker.  Traveler cases fit many popular camera models such as Sony PMW-EX1, PMW-EX3, HVR-Z7Panasonic AG-HMC70JVC HD-100U, and many more Features ENG-stlye viewfinder protection1-inch thick padded, plastic-reinforced frameQuick-access zipper designLightweight, compact, protectiveMost sizes are airline overhead compatibleComes with "camera-stabilizing system"Constructed using long-lasting, durable materialsComfortable carrying strap included Dimensions Weight  5.10 lb / 2.31 kgInterior 22" x 6.5" x 10" / 55.88 cm x 16.51 cm x 25.40 cmExterior 24" x 11.25" x 12" / 60.96 cm x 28.58 cm x 30.48 cm

Porta Brace CTC-4B The Traveler Camera Case series is specifically designed for cameras with ENG-style viewfinders. The Traveler has thick foam padding, reinforced by hollow-core plastic on the bottom and sides. A layer of non-slip, water-proof material has been added to the interior and exterior bottom panels of the case. The interior, along with the foam support block, stabilize the camera inside the case. The exterior wipes clean easily and provides extra water-proof protection. The armored plastic view finder protector provides extra support for fragile ENG-style viewfinders. The zipper-facing extends over the zipper to keep rain and debris from getting inside the case during transport. Six total pockets help you organize and protect batteries, tape stock, cables, filters, and your Portabrace Rain-Slicker. Traveler cases fit many popular camera models such as: Sony PMW-EX1, PMW-EX3, HVR-Z7, Panasonic AG-HMC70, JVC HD-100U, and many more. Interior: 63.5 x 16.51 x 27.31cmExterior: 66.04 x 27.31 x 32.39cmWeight: 2.68kg In the box1x CARA-BRNZ Carabiner Flashlight1x CC-STUFFER Camera Stabilizer Block1x HB-1040 Heavy Duty Suede Shoulder Strap1x WBC White Balance Card Equipment coveredCanon XL-1, Canon XL-1S, Canon XL-2, Canon XL-H1JVC GY-DV500, JVC GY-DV5000U, JVC GY-DV5100U, JVC GY-DV550, JVC GY-DV600, JVC GY-DV700, JVC GY-HD100E, JVC GY-HD100U, JVC GY-HD101, JVC GY-HD200, JVC GY-HD250, JVC GY-HD251, JVC GY-HM700, JVC GY-HM700U, JVC GY-HM750, JVC GY-HM750U, JVC GY-HM790, JVC GY-HM790UPanasonic AG-DVC200, Panasonic AG-DVC200P, Panasonic AJ-D410,Sony DSR-300, Sony DSR-370, Sony DSR-500, Sony DSR-570, Sony DSR-590

Porta Brace DVO-1R / DVO-1U DV ORGANIZER Camera Cases in Midnight Black with Red Trim! The DV Organizer provides an extra level of pro options. The DV Organizer is the ideal case for compact protection and lots of storage for field production. DV Organizer Combo includes DV organizer, 2 CS-B9 soft padded stuff packs, custom cradle with tie-down strap (custom fit for your camera), suede leather shoulder strap and white balance card. Equipment covered Canon GL-1, Canon GL-2, Canon XH-A1, Canon XH-G1, Canon XM-1, Canon XM-2Panasonic AG-DVC80, Panasonic AG-DVC80H, Panasonic AG-DVX100, Panasonic AG-DVX100A, Panasonic AG-DVX100B, Panasonic AG-DVX100P, Panasonic AG-DVX102B, Panasonic AG-DVX202, Panasonic AG-HMC150, Panasonic AG-HMC40, Panasonic AG-HPX170, Panasonic AG-HPX171, Panasonic AG-HVX200, Panasonic AG-HVX200ASony DCR-VX2000, Sony DCR-VX2100, Sony DSR-PD150, Sony DSR-PD170, Sony HDR-FX1, Sony HDR-FX7, Sony HVR-A1U, Sony HVR-V1U, Sony HVR-Z1U, Sony HVR-Z5U, Sony HVR-Z7U, Sony PMW-EX1DIMENSIONS Technical data Weight: 6.4 lb / 2.9 kgInterior: L - 17 / 43.18 cm, W - 8 / 20.32 cm, H - 8.5 / 21.59 cmExterior: L - 21 / 53.34 cm, W - 10.25 / 26.04 cm, H - 11 / 27.94 cm

Porta Brace DVO-1R / DVO-1U DV ORGANIZER Camera Cases in Midnight Black with Red Trim! The DV Organizer provides an extra level of pro options. The DV Organizer is the ideal case for compact protection and lots of storage for field production. DV Organizer Combo includes DV organizer, 2 CS-B9 soft padded stuff packs, custom cradle with tie-down strap (custom fit for your camera), suede leather shoulder strap and white balance card. Equipment covered Canon GL-1, Canon GL-2, Canon XH-A1, Canon XH-G1, Canon XM-1, Canon XM-2Panasonic AG-DVC80, Panasonic AG-DVC80H, Panasonic AG-DVX100, Panasonic AG-DVX100A, Panasonic AG-DVX100B, Panasonic AG-DVX100P, Panasonic AG-DVX102B, Panasonic AG-DVX202, Panasonic AG-HMC150, Panasonic AG-HMC40, Panasonic AG-HPX170, Panasonic AG-HPX171, Panasonic AG-HVX200, Panasonic AG-HVX200ASony DCR-VX2000, Sony DCR-VX2100, Sony DSR-PD150, Sony DSR-PD170, Sony HDR-FX1, Sony HDR-FX7, Sony HVR-A1U, Sony HVR-V1U, Sony HVR-Z1U, Sony HVR-Z5U, Sony HVR-Z7U, Sony PMW-EX1DIMENSIONS Technical data Weight: 6.4 lb / 2.9 kgInterior: L - 17 / 43.18 cm, W - 8 / 20.32 cm, H - 8.5 / 21.59 cmExterior: L - 21 / 53.34 cm, W - 10.25 / 26.04 cm, H - 11 / 27.94 cm

Porta Brace DVO-2R Digital Video Organizer Camera Case The DVO-2 DV Organizer Camera Case is designed to hold compact Mini DV camcorders and accessories. It is made from1000 denier Cordura fabric with a new, slip-resistant, easy-clean rubber bottom. The Porta Brace DVO-2R comes with padded interior dividers, a padded accessory pouch, white balance card, camera tie-down strap, camera stabilizer cradle, camera pillow, and comfortable suede shoulder strap. The camera is held in place with a universal cradle and a camera tie-down strap. The lightweight, rigid-frame design provides maximum protection for your camera and accessories, and comfortable carrying for you. Features 19 Various Pockets To Keep You Organized2 pouches for accessories includedAnti-Slip BottomCustomizable solutionDividable Main Compartment InteriorDurable 1000-denier Cordura fabricEngineered for professionalsIdeal for compact travel for a lightwieght carryRemovable Accessory PouchesRidged Frame Dimensions Weight 8.00 lb / 3.63 kgInterior 18" x 9.75" x 10.25" / 45.72 cm x 24.77 cm x 26.04 cmExterior 22.25" x 12.5" x 12.75" / 56.52 cm x 31.75 cm x 32.39 cm

Porta Brace DVO-2UThe DVO-2 DV Organizer Camera Case is designed to hold compact Mini DV camcorders and accessories. It is made from 1000 denier Cordura fabric with a new, slip resistant, easy-clean rubber bottom. The DVO-2 comes with padded interior dividers, a padded accessory pouch, white balance card, camera tie-down strap, camera stabilizer cradle, camera pillow, and comfortable suede shoulder strap. The camera is held in place with a universal cradle and a camera tie-down strap. The lightweight, rigid-frame design provides maximum protection for your camera and accessories, and comfortable carrying for you.19 Various Pockets To Keep You Organized 2 pouches for accessories included Anti-Slip Bottom Customizable solution Dividable Main Compartment Interior Durable 1000-denier Cordura fabricDimensionsDimensions Interior: 45.7 x 22.86 x 25.4 cm Exterior: 58.4 x 30.4 x 33.0 cm Weight: 3.7 kgPackage Includes 1x CARA-BRNZ Carabiner and Flashlight 2x CS-B9 Cam-Corder Stuff Sack 1x CS-CR-CINCH Cam-Corder Cinch1x CS-CR-U Cam-Corder Universal Cradle 1x DVO-HP Hanging pocket

Porta Brace DVO-3RThe DVO-3 has a special design that widens towards the front of the case in order to fit a compact HD camera assembled with a matte box and follow focus. The DVO-3 Camera Case has a padded, hollow-core rigid frame that provides maximum protection for your equipment while remaining lightweight. The case exterior is constructed using durable Cordura material (1000-denier). The DVO-3 has soft suede-leather carrying handles and a comfortable heavy-duty suede shoulder strap. The DVO-3 comes with a camera tie-down strap and a soft plush pillow base to keep the camera stable. There are 12 pockets to store plenty of accessories including a removable laptop pouch and removable lid pouch. A Heavy-duty, suede leather shoulder strap is also included. 12 pockets for extra storage Carry your camera and matte box together Narrow to Wide Design to Accomodate Matte Boxes Rigid frame for maximum protection

Porta Brace HK-12BORThe HK-12BOR Hiker Backpack camera case is designed for comfortably carrying heavy ENG camera setups. The case is a backpack with comfortable, adjustable load-bearing straps and a lightweight rigid frame. Or, quickly tuck the backpack straps away and use it as a rolling case or shoulder bag with the included suede shoulder strap.The case is specifically sized to fit common ENG camera configurations. It is constructed using water-resistant 1000d Cordura fabric and water-proofed nylon-bonded triple-tacked stitching for superior water-resistancy in a range of unpredictable production conditions. The HK-12BOR also has padded, rigid side-walls for maximum protection.The interior lid has an arc-shaped cover for protecting the camera viewfinder. The exterior lid has organizing pockets, including a laptop protective pouch.The inside of the case is lined with Platinum-colored, soft Veltex material. There is a large camera tie-down strap to secure the camera in place during transport. There is also a padded divider system that includes a large rigid, padded divider panel and bendable padded dividers.When carrying as a backpack, the case has a thickly padded, adjustable shoulder harnesses and breathable mesh contoured back pad for maximum comfort.When using as a wheeled case the HK-12BOR has smooth rolling high-performance off-road removable wheels, bearings, axles and solid-steel axles brackets for ease of transport in a range of extreme field and urban production conditions.A comfortable, genuine suede shoulder strap is included. Lightweight, padded rigid frameSoft padded backpack harness with lumbar supportHarness Hide-away system for hand carryLarge External PocketsRemovable off-road wheels DimensionsInterior: 33.02 x 15.24 x 74.93cm Exterior: 38.1 x 17.78 x 81.28cm Weight: 4.26kgEquipment Covered Panasonic AG-HPX600Sony HXR-NX30Sony PMW-500Sony PXW-X400 Package Includes1x CARA-B RNZ Carabiner and Flashlight 2x CC-STUFFER Camera Case Stuffer Pillow 1x WBC White Balance Card

Porta Brace PC-PTZOPTICS30XThe PC-PTZOPTICS30X is designed to organize and protect a PTZ-OPTICS 30X (or similarly sized) PTZ camera and a joystick controller, and cables. The production case is crush-resistant thanks to a combination of a full-width, rigid panel set between layers of Cordura nylon, and a bonded foam and plastic, lightweight rigid lid. There are interior partitions that can be positioned to accommodate changing equipment needs. The case has one large outside front pocket, two padded side pockets, and interior mesh pockets. Carry using the included comfortable suede-leather shoulder strap or carrying handles. A carabinder flashlight is also included for convenient lighting in dark production enviornments. Interior: 26,80 cm x 17,78 cm x 30,48 cmWeight: 2.4kg In the box 1x CARA-BRNZ Carabiner & Flashlight1x Corrugated padded divider board1x HB-10 Suede Shoulder Strap1x WBC White Balance Card

Porta Brace PTZ-CARRYCASEThe PTZ-CARRYCASE is the Ultimate Lightweight Solution for Transporting Your PTZ Cameras and Controller. Tired of lugging around cumbersome hard cases Looking for a lightweight yet durable solution to transport your mobile PTZ camera setup Look no further! We have the perfect solution with our Soft PTZ Carrying Case. Designed specifically to transport and protect multiple PTZ cameras and a controller, this versatile carrying case is your go-to solution for seamless transportation and unmatched protection. Key Features Superior Protection: Crafted with our signature high-quality Cordura material and reinforced with padding, this soft carrying case ensures your valuable PTZ cameras and controller are safe from bumps, scratches, and impact damageLightweight and Easy-to-Carry: Say goodbye to backaches and shoulder pain! Our PTZ Soft Carrying Case is a feather-light alternative to those hefty hard cases, making it an absolute breeze to transport your gear to any locationCustomizable Interior: The case features adjustable padded dividers, allowing you to securely fit multiple PTZ cameras and your controller. Configure the interior compartments according to your specific needs, ensuring your equipment stays organized and secureQuick Access: With a large Quick-Zip opening, gain hassle-free access to your PTZ cameras and controller. No more struggling with hard-to-open latches or fumbling with heavy lids simply unzip and you're ready to goWeather Resistant: Built with weather-resistant materials, the Portabrace PTZ Soft Carrying Case keeps your gear safe from the elements. Now you can confidently transport your equipment through rain or shineExtra Storage Pockets: In addition to the main compartment, our case features exterior pockets for added storage, making it easy to store cables and other accessoriesComfortable Carrying Options: Choose between the padded shoulder strap or ergonomic carry handles for the most comfortable carrying experiencePadded Accessory Pouch: The PTZ-CARRYCASE comes with a soft padded 6-inch x 9-inch zippered accessory pouchThe Portabrace PTZ Soft Carrying Case offers a lightweight, durable, and convenient solution to transport and protect your mobile PTZ camera setup. Your back, shoulders, and equipment will thank you!Features Ultra-light designDual-rigidity foam for maximum equipment protectionRugged construction and long-life materialsGenuine suede comfort shoulder strap and handlesSlip-not anti-skid and waterproof bottom panel DimensionsInterior: 55.2 x 22.9 x 22.9 cm Exterior: 69.9 x 29.2 x 26.7 cm Weight: 2.4 kgPackage Includes1x DK-3CAM Divider 2x DK-2CAM Dividers 2x DK-C4 Padded Dividers 1x CS-B9 Zippered Padded Pouch

Porta Brace RB-1The black Porta Brace RB-1B Small Lightweight Run Bag is designed for news and production crews. The bag stores spare tapes, batteries, cables, microphones, and other audio/video accessories. The main compartment is foam-padded with a padded rigid bottom.Two sewn-in dividers span the 17,78 cm width with a 30,48 cm divider in between. The long divider has a zippered slip pocket. On the outside there are two large zippered compartments for cables or other items, both of which can be folded out of the way to create one large compartment. The RB-1B has a zippered facing to keep even more water out, should the case be left out in the rain. It is carried by straps with dual suede leather grips and a suede, medium-duty shoulder strap. The bottom layer features a water-barrier fabric with an easy-clean surface. 1000D Cordura bag made to carry spare tapes, batteries, cables, microphones, and other audio/video accessoriesMain compartment is foam-padded with a padded, rigid bottomTwo dividers are sewn into the bag on one side and they hinge and attach to the other side, creating a center compartmentThe included 12 inch center divider can be attached to partitions to create two longer compartmentsFull over-the-top zipperTwo large zippered cable pockets on the outsideThe bottom is made of a water-barrier fabric with an easy-clean surface Carrying options Suede leather grip handlesRemovable, adjustable, padded shoulder strapFor Audio/Video Production AccessoriesSmall 1000-Denier Cordura BagFoam-Padded Main CompartmentTwo Large Exterior Cable PocketsCarabiner with FlashlightDual Suede-Covered Grip HandlesRemovable Suede Shoulder StrapSpecificationInterior Dimensions 18 x 7 x 9.5" / 45.7 x 17.8 x 24.1 cm Carrying/Transport Options Handle, Shoulder Strap Type of Closure Zipper

Porta Brace RB-1BThe black Porta Brace RB-1B Small Lightweight Run Bag is designed for news and production crews. The bag stores spare tapes, batteries, cables, microphones, and other audio/video accessories. The main compartment is foam-padded with a padded rigid bottom.Two sewn-in dividers span the 7.0 inch width with a 12 inch divider in between. The long divider has a zippered slip pocket. On the outside there are two large zippered compartments for cables or other items, both of which can be folded out of the way to create one large compartment.The RB-1B has a zippered facing to keep even more water out, should the case be left out in the rain. It is carried by straps with dual suede leather grips and a suede, medium-duty shoulder strap. The bottom layer features a water-barrier fabric with an easy-clean surface. 1000D Cordura bag made to carry spare tapes, batteries, cables, microphones, and other audio/video accessoriesMain compartment is foam-padded with a padded, rigid bottomTwo dividers are sewn into the bag on one side and they hinge and attach to the other side, creating a center compartmentThe included 12 inch center divider can be attached to partitions to create two longer compartmentsFull over-the-top zipperTwo large zippered cable pockets on the outsideThe bottom is made of a water-barrier fabric with an easy-clean surface Carrying options Suede leather grip handlesRemovable, adjustable, padded shoulder strapFor Audio/Video Production AccessoriesSmall 1000-Denier Cordura BagFoam-Padded Main CompartmentTwo Large Exterior Cable PocketsCarabiner with FlashlightDual Suede-Covered Grip HandlesRemovable Suede Shoulder Strap SpecificationInterior Dimensions: 45.7 x 17.8 x 24.1 cm Carrying/Transport Options Handle, Shoulder Strap Type of Closure Zipper

Porta Brace RB-2The Porta Brace RB-2 Lightweight Run Bag, Medium (Black) is designed for news and production crews. The bag stores spare tapes, batteries, cables, microphones and other audio/video accessories. The main compartment is foam padded, with a padded rigid bottom. Two sewn-in dividers span the 17,78 cm width with a 30,48 cm divider in between. The long divider has a zippered slip pocket. On the outside there are two large zippered compartments for cables or other items. Fold them out of the way for one large compartment. The RB-2 has a zippered facing to keep even more water out, should the case be left out in the rain. It is carried by straps with suede leather grips, and a suede leather, medium-duty shoulder strap. A bottom layer of Slip-Not water-barrier fabric with an easy wipe-clean surface has been added.

Porta Brace RB-2BThe RB-2B Lightweight Run Bag, Medium (Black) is designed for news and production crews. The bag stores spare tapes, batteries, cables, microphones and other audio/video accessories. The main compartment is foam padded, with a padded rigid bottom. Two sewn-in dividers span the 17,78 cm width with a 30,48 cm divider in between. The long divider has a zippered slip pocket. On the outside there are two large zippered compartments for cables or other items. Fold them out of the way for one large compartment. The RB-2B has a zippered facing to keep even more water out, should the case be left out in the rain. It is carried by straps with suede leather grips, and a suede leather, medium-duty shoulder strap. A bottom layer of Slip-Not water-barrier fabric with an easy wipe-clean surface has been added.

Porta Brace RB-4 Run Bag Lightweight XL The New Porta Brace RB-4 Run Bag has a new zipper facing to keep even more water out should you forget and leave the case out in the rain. The main compartment is foam padded with a padded rigid bottom. Two dividers span the 7" width with a 12" divider in between (with zippered slip pocket), providing a useful array of subdivisions. Fold them out of the way for one large compartment. A shoulder strap is included. 2 Large Exterior Zipper PocketsCustomizable solutionDurable, 1000-denier CorduraEngineered for professionalsHeated Version Available See RB-3KHeated Version Available See RB-3KBHeavy Duty HB-40 Shoulder Strap IncludedLargest Run Bag AvailableLightweightSlip-Not Anti-Skid BaseSuperior performance through simplicity of design RB-4 Model 1 x HB-40  Large Suede Shoulder Strap1 x DIV-5x13CORR  Soft 5"x 13" Rigid Divider Equipment covered Sony HXR-NX5USony HXR-NX5U Porta Brace Run Bag Data Weight 2.09 kgInterior 73.66 cm x 19.05 cm x 24.13 cmExterior 78.74 cm x 30.48 cm x 33.02 cm

Porta Brace RB-4 Run Bag Lightweight XL The New Porta Brace RB-4 Run Bag has a new zipper facing to keep even more water out should you forget and leave the case out in the rain. The main compartment is foam padded with a padded rigid bottom. Two dividers span the 7" width with a 12" divider in between (with zippered slip pocket), providing a useful array of subdivisions. Fold them out of the way for one large compartment. A shoulder strap is included. 2 Large Exterior Zipper PocketsCustomizable solutionDurable, 1000-denier CorduraEngineered for professionalsHeated Version Available See RB-3KHeated Version Available See RB-3KBHeavy Duty HB-40 Shoulder Strap IncludedLargest Run Bag AvailableLightweightSlip-Not Anti-Skid BaseSuperior performance through simplicity of design RB-4 Model 1 x HB-40  Large Suede Shoulder Strap1 x DIV-5x13CORR  Soft 5"x 13" Rigid Divider Equipment covered Sony HXR-NX5USony HXR-NX5U Porta Brace Run Bag Data Weight 2.09 kgInterior 73.66 cm x 19.05 cm x 24.13 cmExterior 78.74 cm x 30.48 cm x 33.02 cm

Porta Brace RIG-EVA1OR The Porta Brace RIG-EVA1OR Cargo Case Camera Editionis designed to accommodate the Panasonic AU-EVA1. It also features an off-road wheel system with steel axles, solid rubber wheels, and ball bearings. The case is constructed of dual-rigidity foam for maximum protection, 1000-denier nylon, and solid steel clip rings. There are reversed zippers and a slip-not anti-skid waterproof bottom panel for water-resistance and durability. The case can be carried using the carry handles or the included suede shoulder strap. A 9" interior height allows you to pack your camera in shoot-ready configurations, and the bag's quick-draw opening offers easy access to your rig. There are front and back slip pockets for carrying SD cards, documents, cords, and white balance cards. Two side pockets can hold batteries, flash cards, cords, and similar items. The interior of the case is copper colored, providing a contrast to your equipment for clear visibility of the case contents. The RIG-EVA1OR includes a divider system for customizing the case's interior, comprised of one horizontal divider, one hanging mic pocket, one padded divider pouch, one camera tie-down, and one divider camera cradle. Dual-rigidity foam for maximum equipment protectionGenuine suede comfort shoulder strap and handlesAnti-skid and waterproof bottom panelSmooth-rolling off-road wheel systemFront, back, and side pockets for accessoriesReversed zippers and waterproof bottom panel for protection against inclement weatherIncludes divider system and pouches for customizing the interior Features Lightweight, semi-rigid frameSoft suede shoulder strap and handles Anti-skid and waterproof bottom panel Smooth-rolling off-road wheel system Front, back, and side pockets for accessories Reversed zippers and waterproof bottom Includes divider system interior Includes padded pouches for accessories Dimensions Interior: 55.9 cm x 24.1 cm x 27.9 cmExterior: 59.7 cm x 29.2 cm x 33.0 cmWeight: 3.1 kg In the box 1 x CARA-BRNZ Carabiner with Flashlight1 x CS-B9 Stuff Sack (Black, Single Pack)1 x WBC White Balance Card1 x HB-10 Suede Shoulder Strap1 x CS-CR-CINCH Cam-Corder Cinch1 x CS-CR-U Cam-Corder Universal Cradle1 x DVO-HP Hanging Pocket

Porta Brace RIG-EVA1XL Ultra-light Cordura camera case for Panasonic AU-EVA1 The RIG-EVA1XL is a durable, versatile soft-sided camera case for the Panasonic AU-EVA. The case is constructed using ballistic-grade, 1000-denier Cordura nylon with an ultra-lightweight 1-inch thick interior foam frame. There is a "quick-zip" lid that provides fast, unobstructed access to the main compartment.  The case fits a wide range of cinema camera and modular-rig configurations.  An extra layer of waterproof Slip-Not material lines the bottom of the case for maximum protection against water when placing the case on the ground.  The Porta Brace RIG-EVA1XL camera case can be carried using the soft suede-leather handles or comfortable nylon SuperStrap strap with anti-skid bottom layer. There is a large zippered pocket on the back of the case, which is ideal for storing cables, filters, and small accessories.  A large, Velcro-closure front pocket is designed to carry shotgun mics, spare batteries, and other small accessories. RIG-EVA1XL features Quick-zip lid for fast access to equipmentUltra-light frame for comfortable carryingThick padding for maximum protection11.25-inch interior height fits wide range of cinema cameras4 large exterior storage pocketsIncluded padded pouches, dividers, and Lens Cup RIG-EVA1XL dimensions Interior: 43.18 cm x 29.21 cm x 28.56 cmExterior: 53.34 cm x 33.66 cm x 33.02 cmWeight: 2.04 kg In the box 1 x CS-CR-CINCH - Camera Stabilizing Cinch1 x CC-STUFFER - Lens Support Pad1 x CARA-BRNZ - Carabiner Flashlight1 x RX-STRIP - Elastic Accessory Holder1 x PKT-2B - 2-Pouch Hanging Pocket1 x HB-20SS - SuperStrap1 x DVO-HP - Long Hanging Pocket1 x DK-RND - Padded Lens Wrap

Porta Brace RIG-EVA1XT The Cargo Case Camera Edition has an ultra-light design, featuring dual-rigidity foam for maximum equipment protection.  The Porta Brace RIG-EVA1XT has been designed to add extra height to this case to accomodate your equipment needs in a better manner.  It is designed to Panasonic AU-EVA1 setups up to 21.75" long . This rugged case is constructed using long-life materials including 1000-denier Cordura® nylon and solid steel clip rings. Reversed zippers and a slip-not anti-skid waterproof bottom panel are used for increased water-resistancy and durability. Features Ultra-light designDual-rigidity foam for maximum equipment protectionRugged construction and long-life materialsGenuine suede comfort shoulder strap and handlesSlip-not anti-skid & waterproof bottom panelExtra added height Dimensions Interior: 55.9 cm x 24.1 cm x 27.9 cmExterior: 59.7 cm x 29.2 cm x 33.0 cmWeight: 2.9 kg In the box 1 x CS-B9 Cam-Corder Stuff Sack1 x CS-CR-CINCH Cam-Corder Cinch1 x CS-CR-U Cam-Corder Universal Cradle1 x DVO-HP Hanging Pocket1 x HB-10 Suede Shoulder Strap1 x WBC White Balance Card

Porta Brace SLR-1B SKU: SLR-1B The Porta Brace SLR-1B SLR Camera Case is a durable case for field photography. There is a padded, rigid-frame interior with adjustable camera tie-down strap that secures your camera in place. A padded divider-kit system organizes and protects camera & accessories. Carry using the suede handles or comfortable shoulder strap. SLR-1B features Durable, rigid frameInterior divider kitCamera cradle stabilizing systemNon-skid, water-resistant bottom SLR-1B technical data Interior: 16.5 mm x 20.32 mm x 33.7cmExterior: 26.7 mm x 25.4 mm x 46.4cmWeight: 2.4kg Dedicated for Blackmagic Design Cinema CameraCanon DSLR CamerasCanon XC10Hasselblad DSLR CamerasIkonoskop A-Cam dllMamiya DSLR CamerasNikon DSLR CamerasOlympus DSLR CamerasPanasonic DSLR CamerasPentax DSLR CamerasSamsung DSLR CamerasSony DSLR Cameras In the box 1 x  CC-STUFFER Camera Case Stuffer Pillow1 x CS-CR-CINCH Cam-Corder Cinch4 x DIV-5X3 Bendable Dividers1 x DK-C26LENS Bendable Long Divider1 x HB-10 Suede Shoulder Strap1 x PB-BSMP Small Pillow For Internal Combo Case1 x PB-7LC 7-inch Padded Lens Cup1 x CARA-BRNZ Carabiner w/ Flashlight

Porta Brace WPC-1OR Perfect for transporting all kinds of heavy loads for studio, audio, video and film equipment. The entire case line has been redesigned to provide more space with a new, lighter-weight frames.   Constructed of a strong, rigid interior frame covered with padding and 1.000 denier Cordura® nylon fabric.   The off-road wheels have ball-bearings and sturdy steel axels for long-lastingsmooth rolling over almost any surface. The Porta Brace WPC-1OR and 2OR models have retractable handles and the large WPC-3OR has a comfortable removable leather handle.   All models come with padded, customizable divider-kits and  LI-GLW Interior Illumination Pouches.  Weight: 11.60 lb / 5.26 kgInterior: 20.5" x 10.5" x 7" / 52.07 cm x 26.67 cm x 17.78 cmExterior: 23" x 12" x 10.5" / 58.42 cm x 30.48 cm x 26.67 cm