MID49 Audio Breakout AB-1 SKU: M49-BOB-AB1 Audio Breakout AB-1 (RED Komodo-X, V-Raptor, ARRI Alexa Mini, Z CAM E-2) is a passive adapter that converts the camera's 5-pin 00 LEMO to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates like RED Komodo Breakout Side Plate(sold separately). Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows the AB-1 to attach using a 3/8-16 screw with ARRI locating pins. Also compatible with Z CAM E2 (all models) but may conflict with CTRL 1 port or COM port due to connector angles. 20cm cable length with right angle LEMO-compatible connector. Product Weight: 42gProduktabmessungen (B x L x H): 35 x 277 x 28mm
MID49 Audio Breakout AB-10 for Canon C400 SKU: M49-BOB-AB10 Audio Breakout AB-10 for Canon C400 is a passive adapter that converts the camera's two mini XLRs to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or optional Breakout Side Plate for Canon C400 for clean cable management.Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-10 to attach using a 3/8-16 screw with ARRI locating pins.Attaches easily to rods using the Single 15mm Rod Clamp or Single 19mm Rod Clamp (sold separately). 23cm cable length with custom low profile right angle mini XLR connector.
MID49 Audio Breakout AB-2 SKU: M49-BOB-AB2 Audio Breakout AB-2 (ARRI Alexa 35, Alexa Mini LF) is a passive adapter that converts the camera's 6-pin 0B LEMO to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-2 to attach using a 3/8-16 screw with ARRI locating pins. 20cm cable length with right angle LEMO-compatible connector. Product Weight: 42gProduct Dimensions (WxLxH): 35 x 277 x 28mm
MID49 Audio Breakout AB-3 SKU: M49-BOB-AB3 Audio Breakout AB-3 (RED Komodo, DSMC2, DSLR, Stereo 3.5mm TRS) is a passive adapter that converts the camera's 3.5mm plug to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-3 to attach using a 3/8-16 screw with ARRI locating pins. 12 inch (30.5cm) cable length with right angle 3.5mm TRS connector. Product Weight: 42gProduct Dimensions (WxLxH): 35 x 277 x 28mm
MID49 Audio Breakout AB-4 SKU: M49-BOB-AB4 Audio Breakout AB-4 (Canon C70) is a passive adapter that converts the camera's two mini XLRs to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-4 to attach using a 3/8-16 screw with ARRI locating pins. 30.5cm cable length with custom low profile right angle mini XLR connector. Product Weight: 56gProduct Dimensions (WxLxH): 35 x 362 x 28mm
MID49 Audio Breakout AB-5 SKU: M49-BOB-AB5 Audio Breakout AB-5 (Sony Venice, Venice 2, 5-pin XLR) is a passive adapter that converts the camera's single 5-pin XLR to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or 3rd party cages. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-5 to attach using a 3/8-16 screw with ARRI locating pins. 20.3cm cable length with 5-pin male XLR connector. Product Weight: 42gProduct Dimensions (WxLxH): 35 x 277 x 28mm
MID49 Audio Breakout AB-6 SKU: M49-BOB-AB6 Audio Breakout AB-6 (Blackmagic Pocket 6K) is a passive adapter that converts the camera's two mini XLRs to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or 3rd party cages. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-6 to attach using a 3/8-16 screw with ARRI locating pins. 30.5 cm cable length with custom low profile right angle mini XLR connector. Compatible with the Blackmagic Design Pocket Cinema Camera 6K Pro (CINECAMPOCHDEF06P) and Pocket Cinema Camera 6K G2 (CINECAMPOCHDEF6K2) Product Weight: 56gProduct Dimensions (WxLxH): 35 x 362 x 28mm
MID49 Audio Breakout AB-7 SKU: M49-BOB-AB7 Audio Breakout AB-7 (ARRI Sonosax AEM-1, Dual Mini XLR Female) is a passive adapter that converts the ARRI Alexa 35's Sonosax AEM-1 dual mini XLRs to two standard, full-size XLRs. Attaches by a captive 1/4-20 screw and rubber pad to ARRI's camera cage components. Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-7 to attach using a 3/8-16 screw with ARRI locating pins. 30.5cm cable length with two 3-pin female mini XLR connectors. Product Weight: 42gProduct Dimensions (WxLxH): 35 x 277 x 28mm
MID49 Audio Breakout AB-9 (Blackmagic PYXIS)SKU: M49-BOB-AB9 Audio Breakout AB-9 (Blackmagic PYXIS) is a passive adapter that converts the camera's front mini XLR and rear 3.5mm TRS plug into two standard, full-size XLRsInput 1 - balanced audio with phantom power via camera menuInput 2 - unbalanced audio, no phantom power availableAttaches by a captive 1/4-20 screw and rubber pad to the camera body or Side Plate (Blackmagic PYXIS). Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Side Mounting Bracket (ARRI 3/8-16) (sold separately), which allows AB-9 to attach using a 3/8-16 screw with ARRI locating pins. Attaches easily to rods using the Single 15mm Rod Clamp or Single 19mm Rod Clamp (sold separately). 24 cm cable length with custom low profile mini XLR connector and Neutrik 3.5mm TRSWeight: 56gDimensions (WxLxH): 35 x 250 x 28mm
MID49 Breakout Box and Side Plate Bundle for Blackmagic PYXISSKU: M49-BOB-SPB-BPBreakout Box and Side Plate Bundle for Blackmagic PYXIS includes:Side Plate (Blackmagic PYXIS)A mounting plate that attaches to the side of the camera and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. A marked set of 3/8-16 and 1/4-20 holes are on the sensor axis and the plate is the correct thickness to mount the camera vertically on Baseline 15mm LW (Blackmagic PYXIS) and use 15mm rods at the correct lens heightAudio Breakout AB-9 (Blackmagic PYXIS)A passive adapter that converts the camera's front mini XLR and rear 3.5mm TRS plug into two standard, full-size XLRsInput 1 - balanced audio with phantom power via camera menuInput 2 - unbalanced audio, no phantom power available24 cm cable length with custom low profile mini XLR connector and Neutrik 3.5mm TRS.
MID49 Breakout Boxes and Side Plate Bundle For Canon C400 SKU: M49-BOB-SPB-C4 Breakout Boxes and Side Plate Bundle for Canon C400 includesBreakout Side Plate for Canon C400, which attaches to the ARRI rosette on the side of the camera and provides a 15mm rod clamp for attaching lens motors, a female ARRI rosette for attaching Canon's handgrip, and a breakout box mounting area with 1/4-20's and recessed cable loops for attaching the included breakout boxes AB-10 and EB-10.Audio Breakout AB-10 (Canon C400) is a passive adapter that converts the camera's two mini XLRs using a custom, low-profile connection to two standard, full-size XLRs.DIN Timecode Genlock Breakout EB-10 (Canon C400) converts the DIN 1.0/2.3 connectors using a custom, low-profile connection to standard BNCs for Timecode and Genlock.Also included is a 1/4-20 knurled knob for attaching Canon's microphone shock mount to the top of the breakout panel.
MID49 Breakout Boxes and Side Plate BundleSKU: M49-BOB-SPB-X Breakout Boxes and Side Plate Bundle for RED KOMODO-X includesBreakout Side Plate for RED KOMODO and KOMODO-XAB-1 (RED Komodo-X, V-Raptor, ARRI Alexa Mini)EB-1 (RED Komodo, Komodo-X, V-Raptor)
MID49 Breakout Boxes and Side Plate Bundle for RED V-Raptor SKU: M49-BOB-SPB-VR1 Breakout Boxes and Side Plate Bundle for RED V-Raptor includes: Breakout Side Plate for RED V-Raptor - attaches to the side of the RED V-Raptor and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. Two offset 1/4-20 holes matching RED's spacing allow certain 3rd party products to be attached like GDU Atlas Side Handle (Raptor, Right) AB-1 (RED V-Raptor) - A passive adapter that converts the camera's 5-pin 00 LEMO to two standard, full-size XLRs and attaches by a captive 1/4-20 screw and rubber pad. EB-1 (RED Komodo, Komodo-X, V-Raptor) - An EXT port converter that provides industry-standard connectors: Genlock: 75-ohm BNCTimecode: 5-pin 0BCTRL: 4-pin 00Trigger: 3-pin FischerEXT Pass-Through: 9-pin 0B
MID49 DIN Timecode Genlock Breakout EB-10 For Canon C400 SKU: M49-BOB-EB10 DIN Timecode Genlock Breakout EB-10 (Canon C400) converts the DIN 1.0/2.3 connectors to standard BNCs for Timecode and Genlock. Attaches by a captive 1/4-20 screw and rubber pad to the camera body or optional Breakout Side Plate for Canon C400 for clean cable management.Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Mounting Bracket (ARRI 3/8-16, Rear Mount) (sold separately), which allows the EB-10 to attach using a 3/8-16 screw with ARRI locating pins. 23cm cable length with custom low profile dual DIN male interface.
Direct Connect Fujifilm ETERNA 55 XLR ModuleSKU: M49-BOB-AB13Direct Connect Fujifilm ETERNA 55 XLR Module is a modified TASCAM XLR Module that interfaces directly with the ETERNA's handle connector. Both the TASCAM main module unit and the MID49 mounting bracket / cable assembly are included with this product. The modified module reduces the overall rig height and adds a robust metal mounting bracket, which can be configured behind the Rainbow Handle or any third-party handle with an ARRI 3/8-16 on the back. A miniature rosette on the mounting bracket allows the 3/8-16 screw to be positioned at various angles, including completely flat for screwing down on top of a cheese plate. When using the Direct Connect Module on the ETERNA 55, two channels of balanced audio with optional phantom power are available.
MID49 EXT Breakout EB-1 SKU: M49-BOB-EB1 EXT Breakout EB-1 (RED Komodo, Komodo-X, V-Raptor) converts the camera's 9-pin 0B LEMO EXT port to industry standard connectors listed below. Genlock: 75-ohm BNCTimecode: 5-pin 0BCTRL: 4-pin 00Trigger: 3-pin FischerEXT Pass-Through: 9-pin 0B Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates like Breakout Side Plate Only (RED Komodo-X)(sold separately). Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Mounting Bracket (ARRI 3/8-16, Rear Mount) (sold separately), which allows the EB-1 to attach using a 3/8-16 screw with ARRI locating pins. 8 inch (20cm) cable length with right angle LEMO-compatible connector. Weight: 70gDimensions (WxLxH): 54 x 271 x 19mm
MID49 Timecode Splitter Timecode Splitter is a breakout box for the 0B 5pin timecode LEMO found on ARRI cameras, splitting it into BNC's for T/C IN and T/C OUT.Length: 12,7 cmChoose between straight and right angle connectorsWeight: 42gDimensions (WxLxH): 35 x 200 x 17 mm
MID49 Timecode Splitter Timecode Splitter is a breakout box for the 0B 5pin timecode LEMO found on ARRI cameras, splitting it into BNC's for T/C IN and T/C OUT.Length: 12,7 cmChoose between straight and right angle connectorsWeight: 42gDimensions (WxLxH): 35 x 200 x 17 mm
NextLevel NL-1 It is a professional device splitting audio signals, closed in a compact metal casing. This device is ideal wherever there is a need of splitting audio signal or providing galvanic separation between elements of audio track. Thanks to its small size NL-1 is perfect as "problem solver" especially in mobile installations such as: stagesfilm set(TV) StudiosDSNG vans The NL-1 is equipped with one input, True direct output and two galvanically separated outputs with independent ground fault. The splitter is built using Lundahl audio transformers ensuring highest broadcast quality and minimum distortion.The device is adapted to work in a wide range of input levels: from microphone to +16dBu. The splitter casing is made of powder-coated aluminum.The device uses the highest quality XLR connectors from Neutrik with gold-plated contacts.To ensure the best matching, the input is equipped with an input impedance switch.Made in the EU Technical data Dimensions: (LxWxH): 111mm x 82mm x 33mmDistortion: 0.1% @ + 6 dBU, 50Hz / 1% < @ + 16 dBU, 50HzFrequency response: 10 Hz - 200 kHz +/- 0.5 dBIsolation: winding-to-winding - 4kV / Winding to screen - 2kV / Screen to screen - 2kV
NextLevel NL-2 two-channel audio splitter It is a professional device splitting audio signals, closed in a compact metal casing. This device is ideal wherever there is a need to separate audio components and eliminate their mutual harmful effects such as hum influence, for example: noise. Because of its small size the NL-2 is perfect as "problem solver" especially in mobile installations such as: stagesfilm set(TV) StudiosDSNG vans The NL-2 is equipped with one input, True direct output and two galvanically separated outputs with independent ground fault. The splitter is built using Lundahl audio transformers ensuring highest broadcast quality and minimum distortion.The device is adapted to work in a wide range of input levels: from microphone to +16dBu. The splitter casing is made of powder-coated aluminum.The device uses the highest quality XLR connectors from Neutrik with gold-plated contacts.To ensure the best matching, the input is equipped with an input impedance switch.Made in the EU Technical data overview Dimensions: (LxWxH): 111mm x 82mm x 33mmDistortion: 0.1% @ + 6 dBU, 50Hz / 1% < @ + 16 dBU, 50HzFrequency response: 10 Hz - 200 kHz +/- 0.5 dBIsolation: winding-to-winding - 4kV / Winding to screen - 2kV / Screen to screen - 2kV
Next Level NL-3 antenna amplifier / splitter Next Level NL-3 is a double compact, amplifier and antenna splitter designed for wireless receivers. The device contains four functional blocks, an ultra-low noise stabilizer, a professional RF filter operating in the 470-680Mhz band, an uncompromising RF amplifier and an antenna signal splitter. All blocks together form a system with extremely high parameters. NL-3 is used wherever there is a need to provide an antenna signal from two antennas to more than one diversity receiver. This device is ideally suited to movie plans, and wherever there is a need to use multiple wireless microphones. Particularly noteworthy is the bandpass filter used in the device, whose task is to remove any interference signals from outside the receiver's operating band NL-3 consists of two identical sections. Each of them is equipped with two BNC antenna inputs and four independent SMA outputs. The device housing is made of powder-coated aluminum. Technical data Frequency response 470-680MhzGain Ok. 12dBInput impedance 50 OhmOutput impedance 50 OhmInput Port BNCOutput Port SMAPower 15V DCPower consumction ~200mADimensions 136mm x 82 x 33mm
Panasonic DMW-XLR1 Panasonic DMW-XLR1 is a XLR Microphone Adaptor for LUMIX GH5 Record audio professionally with this XLR microphone adapter Compatible with Panasonic LUMIX GH5. It provides two analog XLR jack terminals and can support output of: Digital, I2S format, Fs = 48 k or 96 kHz, Bit depth of 16 or 24 bit. An integrated cable clamp keeps cables out of the way. DC power is supplied by the camera body via the hot shoe connector. Physical switches and dials under a clear cover provide for easy setup and monitoring. DMW-XLR1 features XLR microphone adaptor for professional video production (LUMIX GH5 Compatible)Input: Analog, XLR Jack x 2 terminalsOutput: Digital, I2S format, Fs = 48 k or 96 kHz, Bit depth = 16 or 24 bit.An integrated cable clamp keeps cables out of the way.DC power is supplied by the camera body via a shoe connector.Control panel can be checked through a clear cover.
Sound Devices 833 The Sound Devices 833 is the professional’s tool for mobile and small productions. Like the popular Sound Devices 633, the 833 is small, lightweight, and compact. A tactile interface with dedicated faders, trim knobs, and PFL switches makes this mixer-recorder ideal for run-and-gun bag use. The 833 has 6 mic/line preamplifiers, 8 channels, 12 tracks, 6 analog outputs, and ultra-accurate timecode. Many features have carried over from the premium Sound Devices’ Scorpio, such as Sound Devices’ new preamplifier design, 2 SD card slots, dual L-Mount battery charging and powering, and an internal 256 GB SSD. Optional 6 ultra low-noise, 8-Series microphone preamplifiers8 channels, 6 buses, 12 tracks6 analog outputsUltra-accurate timecode256 GB internal SSD, 2 SD card slotsUSB-A and C ports for SD-Remote app, linear fader control via MCU, keyboard, and file transferDugan Automixing/MixAssist for up to 8 channelsOptional NoiseAssist and CEDAR sdnx noise suppression pluginsOptional +4 Plugin adds four fully-featured channels
Sound Devices 888 Sound Devices 888 is the portable mixer-recorder that’s compact and light enough to use in a bag, yet has the high channel count and power required for mobile cart productions. The 888 is the smallest portable mixer-recorder on the market that offers Dante for sending and receiving audio over Ethernet. With 8 ultra low-noise, 8-Series microphone preamplifiers, 16 channels, 20 tracks, multiple powering methods, and support for multiple USB control surfaces, the 888 can be easily tailored to your workflow. An updated processing architecture and multiple FPGAs enables the 888 to be fully routable: any physical input may be sent to any track, bus, or output. Overview 8 ultra low-noise, 8-Series microphone preamplifiers16 channels, 10 buses, 20 tracks16 channels of Dante I/O256 GB internal SSD, 2 SD card slotsUSB control surface support via MCUDugan Automixing or MixAssist for up to 16 channelsOptional NoiseAssist and CEDAR sdnx noise suppression plugins