TILTA Pro Articulating Arm Black TA-PAA2-B

€49.00*

gross: €58.31

Prices excl. VAT plus shipping costs

Available, delivery time: 1-3 days

Articulating Arm

Basic

Dual NATO

Product number: SW27964.1

TILTA Pro Articulating Arm Black

This articulating arm is the perfect option for mounting accessories to your camera cage such as external monitors, wireless video transmitters, electronic viewfinders and more. The articulating nature of this arm along with a single tie down lock for all axes means users can easily re-position accessories on the fly which is especially helpful in fast paced shooting environments. Weighing in at only 11oz, this arm can support up to 11lbs which makes it the strongest articulating arm in our current lineup. The arm comes in two variations, one that features two NATO Receivers on each end and one that features two 1/4″-20 screws with locating pins.

MOUNTING OPTIONS Include 1/4"-20 with Locating Points or NATO Receivers
STRONG PAYLOAD Supports Up to 11lbs While Weighing Less than 11oz
ANTI-TWIST via Textured Ball Heads to Increase Strength
QUICK LOCKING via a Single Tie Down Screw to Lock All Axes at Once
DURABLE Aluminum Alloy and Stainless Steel Design

Similar products

Vocas Separate Noga Gelenkarm (10,5" lang)

Vocas Separate Noga magic arm SKU: 0350-0405-02Separate Noga magic arm (10,5" long). The maximum load of this magic arm is 5 kg. This NOGA magic arm is equiped with 3/8'' thread to mount it with and 1/4" thread on the other side to mount to monitors, viewfinder and recorders.

€120.00*

gross: €142.80

Neway NW07 7 inch camera magic arm

Neway NW07 7 inch magic arm 7 inch magic arm is a universal camera accessory adjustable arm. Features: Metal hand twist lock designLoad capacity: 5 kgUsing gear mesh design can bear more and durableU-shaped groove design1/4'' Camera screw joint Available lenghts 7 inch magic arm9 inch magic arm11 inch magic arm

€50.42*

gross: €60.00

F&V 4.2" Stainless Steel Articulating Arm

F&V 4.2" Stainless Steel Articulating Arm This articulating arm allows for the mounting of LCD monitors or small LED lights to the top of your camera shoe mount. With a three-jointed arm, this accessory has a wide range of motion. A single-point lock knob allows you to easily secure the position of your arm in place. This NEW articulating arm features stainless steel sockets that offer greater strength. This F&V Articulating Arm can be mounted either on top of a camera in a standard cold shoe via the cold shoe adapter that is included. The cold shoe adapter can also be removed revealing a 1/4"-20 male thread that can be used to thread the arm into 1/4"-20 thread-ins. Materials AluminumNominal Item Dimensions Folded: 13 xm x 6.5 cm x 3.6 cmNominal Weight 227 g

€30.00*

gross: €35.70

Vocas Separate Noga magic arm

Vocas Separate Noga magic armSKU: 0350-0410-02Separate Noga magic arm (8.66" long). The maximum load of this magic arm is 4 kg. This Vocas magic arm is equiped with 1/4'' threads at both sides of the arm, to mount to monitors, viewfinder and recorders.Extended length: 220 mmMaximum payload: 4 kgMaterial: AluminumColor: BlackWeight: 324g

€115.00*

gross: €136.85

Vocas Separate Noga Magic arm SHORT (4.4" long)

Vocas Separate Noga magic arm shortSKU: 0350-0415-02The maximum load of this magic arm is 3 kg. This Vocas magic arm is equiped with 1/4'' threads at both sides of the arm, to mount to monitors, viewfinder and recorders.Extended length: 112 mmMaximum payload: 3 kgMaterial: AluminumColor: BlackWeight: 233g

€103.00*

gross: €122.57

SHAPE LARGE FLEX ARM 1/4-20 TO 3/8-16 ANTI ROTATING

SHAPE LARGE FLEX ARM SKU: FLEX3 The large Flex arm from SHAPE is perfect to strongly mount your monitor, small lights, or sound gear at any angle. Featuring 1/4-20 to 3/8-16 adaptors captive thumb wheels screw with removable Arri standard anti-rotating pins. Each ball head can be released to accommodate your rig configuration. The balls on both ends are encircled by rubber rings that create the friction that holds the arm’s position and support up to 4 pounds when tightened. The locking rachet lever, in the center, provides a secure grip to tighten or loosen both ball heads. Additionally, the arm is also compatible with many third party 25 mm ball mount systems. Key Features 1/4-20 to 3/8-16 large mounting flex arm with anti-rotating pins Perfect to mount and adjust monitor, LED lights, or microphones at almost any angle Adjustable 25 mm ball heads on both ends with rubber rings to hold the arm’s position Locking rachet lever in the center provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy mounting Supports up to 4 lb 5 inches threaded extension Length from end to end: 12 inches Rubber pad to protect your accessory Made of CNC aluminum

€120.00*

gross: €142.80

SHAPE high load friction arm with camera bracket

SHAPE high load friction armSKU: LFWB The high load friction arm with the camera bracket from SHAPE is perfect to strongly mount your camera, monitor, small lights, or sound gear at almost any angle. It is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The locking knob allows partial loosening for safe and precise positioning of your accessory. Each ball joint features a 5/8″ stud with 3/8 female threads on one side and 1/4″ female threads on the other side. High load friction arm with camera bracketPerfect to mount and adjust monitor, LED lights, or microphones at almost any angleFully articulated arm with 90° pivotable and 360° rotatable endsLocking knob allows partial loosening for safe and precise positioningBall joint at each end designed with 5/8″ stud with 3/8” and 1/4” female threadsSupports up to 7 lbLength from end to end: 20 inches (25 with camera bracket)Made of CNC aluminum

€149.00*

gross: €177.31

F&V 8.3" Stainless Steel Articulating Arm

F&V 8.3" Stainless Steel Articulating Arm This articulating arm allows for the mounting of LCD monitors or small LED lights to the top of your camera shoe mount. With a three-jointed arm, this accessory has a wide range of motion. A single-point lock knob allows you to easily secure the position of your arm in place. This NEW articulating arm features stainless steel sockets that offer greater strength. This F&V magic arm can be mounted either on top of a camera in a standard cold shoe via the cold shoe adapter that is included. The cold shoe adapter can also be removed revealing a 1/4"-20 male thread that can be used to thread the arm into 1/4"-20 thread-ins.

€35.00*

gross: €41.65

MID49 Universal Speedball Monitor Arm (3 Inch)

MID49 Universal Speedball Monitor Arm (3 Inch)SKU: M49-SPD-ARM-3 Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20.Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads.The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws.Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Product Weight: 314gProduct Dimensions (WxLxH): 63 x 25 x 273mm

€165.00*

gross: €196.35

MID49 Universal Speedball Monitor Arm (6 Inch)

MID49 Universal Speedball Monitor Arm (6 Inch)SKU: M49-SPD-ARM-6 Universal Speedball Monitor Arm (6 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 6 inch (150mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 6 inch arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Product Weight: 331gProduct Dimensions (WxLxH): 63 x 25 x 349mm

€175.00*

gross: €208.25

MID49 Universal Speedball Monitor Arm (9 Inch)

MID49 Universal Speedball Monitor Arm (9 Inch)SKU: M49-SPD-ARM-9 Universal Speedball Monitor Arm (9 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 9 inch (225mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 9 inch arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.Product Weight: 348gProduct Dimensions (WxLxH): 63 x 25 x 425mm

€185.00*

gross: €220.15

SHAPE MEDIUM FLEX ARM 1/4-20 TO 3/8-16 ANTI ROTATING

SHAPE MEDIUM FLEX ARM SKU: FLEX2 The SHAPE MEDIUM FLEX ARM is perfect to strongly mount your monitor, small lights, or sound gear at any angle. Featuring 1/4-20 to 3/8-16 adaptors captive thumb wheels screw with removable Arri standard anti-rotating pins. Each ball head can be released to accommodate your rig configuration. The balls on both ends are encircled by rubber rings that create the friction that holds the arm’s position and support up to 8 pounds when tightened. The locking rachet lever, in the center, provides a secure grip to tighten or loosen both ball heads. Additionally, the arm is also compatible with many third party 25 mm ball mount systems. Key Features 1/4-20 to 3/8-16 medium mounting flex arm with anti-rotating pins Perfect to mount and adjust monitor, LED lights, or microphones at any angle Adjustable 25 mm ball heads on both ends with rubber rings to hold the arm’s position Locking rachet lever in the center provides a secure grip to tighten or loosen the arms Captive Thumbwheels for easy mounting Supports up to 8 lbs Length from end to end: 6 inches Rubber pad to protect your accessory Made of CNC aluminum

€64.00*

gross: €76.16

Chrosziel Articulating arm ROCKY (550-RO)

Chrosziel Articulating arm ROCKY SKU: 550-ROChrosziel Articulating arm ROCKY with 2-step central clamp, with 1/4" thread and cold shoe adapter. The central clamp first fixes the articulation and second the ball pivot. The 90° slot is rotating and can be fixed.length: 150 mmweight 158 grpayload 3 kg

€90.00*

gross: €107.10

TILTA Pro Articulating Arm Black TA-PAA2-B

TILTA Pro Articulating Arm Black

The professional source for Filmmakers in Düsseldorf

We provide best equipment and advice in the field of professional video- and audio- technology