TILTA 19mm Studio Tilta Standard to Arri Standard TT-C06-D
€450.00*
gross: €535.50
Dovetail:
No Dovetial
TILTA 19mm Studio Tilta Standard to Arri StandardThis 19mm studio baseplate is designed to adapt a Tilta standard baseplate to an Arri standard baseplate to allow you to use your camera rig on an Arri standard-sized dovetail. The top section of the baseplate that allows for this function can also be removed and replaced with a flat top, which allows it to double as a regular Arri standard-sized baseplate. It uses a hard-anodized surface design and is CNC-milled from a lightweight and durable high-impact aluminum 7075 alloy.
ADAPT - TILTA Standard Baseplates To ARRI Standard DovetailsDOVETAIL SUPPORT - Slides and Locks onto ARRI Standard Dovetails19MM ROD SUPPORT - Secure 19mm Studio Rods to your System for Various AccessoriesUNIVERSAL - Design Allows you to Use this Baseplate with Most Camera SystemsHEAVY DUTY - Aluminum and Steel Construction
TILTA 19mm Studio Tilta Standard to Arri Standard TT-C06-D-07
€780.00*
gross: €928.20
Dovetail:
12inch Dovetial
TILTA 19mm Studio Tilta Standard to Arri StandardThis 19mm studio baseplate is designed to adapt a Tilta standard baseplate to an Arri standard baseplate to allow you to use your camera rig on an Arri standard-sized dovetail. The top section of the baseplate that allows for this function can also be removed and replaced with a flat top, which allows it to double as a regular Arri standard-sized baseplate. It uses a hard-anodized surface design and is CNC-milled from a lightweight and durable high-impact aluminum 7075 alloy.
ADAPT - TILTA Standard Baseplates To ARRI Standard DovetailsDOVETAIL SUPPORT - Slides and Locks onto ARRI Standard Dovetails19MM ROD SUPPORT - Secure 19mm Studio Rods to your System for Various AccessoriesUNIVERSAL - Design Allows you to Use this Baseplate with Most Camera SystemsHEAVY DUTY - Aluminum and Steel Construction
Variants from €450.00*
TILTA Hydra Alien Car Mounting System HDA-T02-AB
€1,250.00*
gross: €1,487.50
Mount option:
GOLD-Mount
TILTA Hydra Alien CarThe Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
Durable & Lightweight with Flexible Installation AnglesOptimized Shock Absorption for Smooth Camera MovementSupports Wireless Control of the RS2/RS3 Pro with Remote Control Kit (optional)Longer Shooting Duration via Gold/V-Mount Battery PlatesSupports any Gimbal that Connects with 1/4"-20 Threads and can Power via P-Tap
Optimized Shock AbsorptionAchieve truly cinematic camera movements. High spring stiffness with the compensation from the hydraulic damping pole. Reduce the amplitude to stabilize the image during sudden movements. Optimized stability provides smooth camera movement and outstanding image.
Wireless Remote ControlOperating from inside the camera car with full control: Remote run/stop control / Real-Time monitoring / Accurate follow focusExtremely secure mounting, no matter what the angle50 kg single suction cup payload. Highly elastic shock-absorbing silicon provides longer durability and less abrasion. Highly adaptable with complicated mounting situations.
TILTA Hydra Alien Car Mounting System HDA-T02-V
€1,250.00*
gross: €1,487.50
Mount option:
V-Mount
TILTA Hydra Alien CarThe Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
Durable & Lightweight with Flexible Installation AnglesOptimized Shock Absorption for Smooth Camera MovementSupports Wireless Control of the RS2/RS3 Pro with Remote Control Kit (optional)Longer Shooting Duration via Gold/V-Mount Battery PlatesSupports any Gimbal that Connects with 1/4"-20 Threads and can Power via P-Tap
Optimized Shock AbsorptionAchieve truly cinematic camera movements. High spring stiffness with the compensation from the hydraulic damping pole. Reduce the amplitude to stabilize the image during sudden movements. Optimized stability provides smooth camera movement and outstanding image.
Wireless Remote ControlOperating from inside the camera car with full control: Remote run/stop control / Real-Time monitoring / Accurate follow focusExtremely secure mounting, no matter what the angle50 kg single suction cup payload. Highly elastic shock-absorbing silicon provides longer durability and less abrasion. Highly adaptable with complicated mounting situations.
Free shipping
TILTA Hydra Alien Car Mounting System Pro Kit HDA-T02-A-AB
€1,750.00*
gross: €2,082.50
Battary Mount:
GOLD-Mount
TILTA Hydra Alien PRO KIT
The Hydra Alien Pro Kit offers a complete package for flexible car mounting while including additional accessories to offer more accurate control and improved ease of use. The Pro Kit features the Remote Control Kit which offers full wired or wireless control of the DJI RS 2 and includes the Hydra Alien Monitor Bracket which makes it easier to monitor your footage while controlling the RS 2.
The Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
The system utilizes a highly customizable combination of dovetail-like plates and suction cups that can support a payload of 50kg each.
Highly elastic shock-absorbing silicon provides longer durability and less abrasion, while the updated suction cup plungers create a stronger seal for improved security in colder weather.
When interconnected, the system allows users to fine-tune the exact placement of their shot to achieve almost any angle possible when mounting to a vehicle.
The system also uses a shock absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down.
The newly included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal.
The Hydra Alien supports full wireless control of the RS2 via the included Remote Control Kit for RS2 which allows you to control your RS 2 gimbal’s settings as well as the record and photo functions of your camera via either a wired or wireless connection.
It also includes a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating.
The new Hard Shell Safety Case is designed to store and protect the Hydra Alien. This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use. The waterproof design protects the case and equipment from hazards like rain and snow. This case functions as a replacement for the one included with the Hydra Alien, but can also be used to store other equipment if needed.
Free shipping
TILTA Hydra Alien Car Mounting System Pro Kit HDA-T02-A-V
€1,750.00*
gross: €2,082.50
Battary Mount:
V-Mount
TILTA Hydra Alien PRO KIT
The Hydra Alien Pro Kit offers a complete package for flexible car mounting while including additional accessories to offer more accurate control and improved ease of use. The Pro Kit features the Remote Control Kit which offers full wired or wireless control of the DJI RS 2 and includes the Hydra Alien Monitor Bracket which makes it easier to monitor your footage while controlling the RS 2.
The Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
The system utilizes a highly customizable combination of dovetail-like plates and suction cups that can support a payload of 50kg each.
Highly elastic shock-absorbing silicon provides longer durability and less abrasion, while the updated suction cup plungers create a stronger seal for improved security in colder weather.
When interconnected, the system allows users to fine-tune the exact placement of their shot to achieve almost any angle possible when mounting to a vehicle.
The system also uses a shock absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down.
The newly included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal.
The Hydra Alien supports full wireless control of the RS2 via the included Remote Control Kit for RS2 which allows you to control your RS 2 gimbal’s settings as well as the record and photo functions of your camera via either a wired or wireless connection.
It also includes a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating.
The new Hard Shell Safety Case is designed to store and protect the Hydra Alien. This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use. The waterproof design protects the case and equipment from hazards like rain and snow. This case functions as a replacement for the one included with the Hydra Alien, but can also be used to store other equipment if needed.
Tilta Hydra Predator Shock Absorbing Arm HDA-T05-AB
€1,450.00*
gross: €1,725.50
Battary Mount:
GOLD-Mount
Tilta Hydra PredatorThe Hydra Predator Shock Absorbing Arm is a more flexible package for car mounting camera and gimbal systems via speed rail while also including additional accessories to offer more accurate control and improved ease of use for the DJI RS2 and RS3 Pro.
The Hydra Predator Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
This Kit is based around the new Predator Rail Mounting Attachment which allows you to secure the arm of the Hydra Alien to any 2 inch speed rail like the ones found in our Speed Rail Mounting Kit.
This offers greater flexibility for vehicle mounting as you are able to better rig a vehicle to your specific needs and will be able to mount the system to structures where 2 inch rails are already present. The system uses a shock absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down.
The included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal.
This Kit features the Remote Control Kit which offers full wired or wireless control of the DJI RS2 or RS3 Pro and includes the Hydra Alien Monitor Bracket which makes it easier to monitor and control the Ronin.
Most importantly, the controller features a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating.The new Predator Hard Shell Safety Case is designed to store and protect the Hydra Predator system while remaining lightweight and compact.
This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use.
The waterproof design protects the case and equipment from hazards like rain and snow.In the box1 x Hydra Alien Rail Mounting Attachment （HDA-T05-RMA）1 x Hydra Alien Shock Absorbing Arm（HDA-T02-SAA）1 x Power Supply Base Plate for RS 2（TGA-PBP）1 x Remote Control Receiver Module for RS 2(TGA-RCR) 1 x Remote Control Handle for RS 2/Ronin S（TGA-RCH)1 x 16-Pin Lemo to 6-Pin Lemo Cable（500 cm)(TCB-6LE-6LE-500)1 x Hydra Dual Battery Plate Cradle Head – V-Mount（HDA-BCH-V)2 x Hydra Alien V-Mount Battery Plate(HDA-T02-BP-V)1 x Hydra Alien 90 Degree Adapter for Shock Absorbing Head（HDA-T02-ASA）1 x Hydra Alien Shock Absorbing Head（HDA-T02-SAH）1 x Hydra Alien Dual Battery Plate Support Bracket（HDA-T02-DPS）8 x 220g Counterweight (TGA-CW-220)1 x Hydra Alien Cable Clamp Suction Cup（HDA-T02-CSC)
(10pcs/set） 1 x Hydra Alien Monitor Bracket（HDA-T02-MB)1 x Tool Kit for Hydra Predator Shock Absorbing Arm（HDA-T05-TK)1 x Hydra Predator Shock Absorbing Arm Hard Shell Waterproof Safety Case（HDA-T05-WSC)
Tilta Hydra Predator Shock Absorbing Arm HDA-T05-V
€1,450.00*
gross: €1,725.50
Battary Mount:
V-Mount
Tilta Hydra PredatorThe Hydra Predator Shock Absorbing Arm is a more flexible package for car mounting camera and gimbal systems via speed rail while also including additional accessories to offer more accurate control and improved ease of use for the DJI RS2 and RS3 Pro.
The Hydra Predator Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
This Kit is based around the new Predator Rail Mounting Attachment which allows you to secure the arm of the Hydra Alien to any 2 inch speed rail like the ones found in our Speed Rail Mounting Kit.
This offers greater flexibility for vehicle mounting as you are able to better rig a vehicle to your specific needs and will be able to mount the system to structures where 2 inch rails are already present. The system uses a shock absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down.
The included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal.
This Kit features the Remote Control Kit which offers full wired or wireless control of the DJI RS2 or RS3 Pro and includes the Hydra Alien Monitor Bracket which makes it easier to monitor and control the Ronin.
Most importantly, the controller features a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating.The new Predator Hard Shell Safety Case is designed to store and protect the Hydra Predator system while remaining lightweight and compact.
This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use.
The waterproof design protects the case and equipment from hazards like rain and snow.In the box1 x Hydra Alien Rail Mounting Attachment （HDA-T05-RMA）1 x Hydra Alien Shock Absorbing Arm（HDA-T02-SAA）1 x Power Supply Base Plate for RS 2（TGA-PBP）1 x Remote Control Receiver Module for RS 2(TGA-RCR) 1 x Remote Control Handle for RS 2/Ronin S（TGA-RCH)1 x 16-Pin Lemo to 6-Pin Lemo Cable（500 cm)(TCB-6LE-6LE-500)1 x Hydra Dual Battery Plate Cradle Head – V-Mount（HDA-BCH-V)2 x Hydra Alien V-Mount Battery Plate(HDA-T02-BP-V)1 x Hydra Alien 90 Degree Adapter for Shock Absorbing Head（HDA-T02-ASA）1 x Hydra Alien Shock Absorbing Head（HDA-T02-SAH）1 x Hydra Alien Dual Battery Plate Support Bracket（HDA-T02-DPS）8 x 220g Counterweight (TGA-CW-220)1 x Hydra Alien Cable Clamp Suction Cup（HDA-T02-CSC)
(10pcs/set） 1 x Hydra Alien Monitor Bracket（HDA-T02-MB)1 x Tool Kit for Hydra Predator Shock Absorbing Arm（HDA-T05-TK)1 x Hydra Predator Shock Absorbing Arm Hard Shell Waterproof Safety Case（HDA-T05-WSC)
TILTA Rotatable EVF Bracket for Sony BURANO
€89.00*
gross: €105.91
TILTA Rotatable EVF Bracket for Sony BURANO
SKU: ESR-T18-REB
This Bracket mounts to the Top Handle included with our Full Camera Cage for Sony Burano via a 15mm Rod Mount, as well as the Burano’s original Top Handle. The other end of the bracket features a mount for the camera’s EVF which can tilt and rotate in order to better position the viewfinder. This mount is also able to be adjusted closer or further to the rod mount in order to accommodate various configurations.
CUSTOM DESIGNED for the Sony Burano 8K Digital Cinema CameraCOMPATIBLE with the Original Top Handle for the Sony Burano via a 15mm Rod MountTILT & ROTATE the Electronic Viewfinder via the EVF Mount on the End of this BracketEXTENDABLE Design Allows Users to Adjust the Position of the EVF in Relation to the Mounting PointLIGHTWEIGHT Construction Adds Minimal Additional Weight to the Camera Rig