RigWheels 100mm Ball Adapter
SKU: ba100
Use this tripod head bowl adapters to mount a half-bowl style tripod head on a flat surface. RigWheels Ball Adapters are custom machined aluminum, anodized black and sized for use with Righweels RigPlate and other flat surfaces. Unlike some other bowl adapters, this 100mm bowl adapter has a true curved bowl interior giving you the most surface area contact with your tripod head.
This RigWheels 100mm Ball Adapter can be used with our RigPlate as well as with any other flat mounting surface that you may want to mount your tripod head to.
RigWheels 75mm Ball Adapter
SKU: BA75
Use this tripod head bowl adapter to mount a half-bowl style tripod head on a flat surface. RigWheels Ball Adapters are custom machined aluminum, anodized black and sized for use with Rigwheels RigPlate and other flat surfaces. Unlike some other bowl adapters, this 75mm Ball Adapter has a true curved bowl interior giving you the most surface area contact with your tripod head.
This RigWheels 75mm Ball Adapter can be used with our RigPlate as well as with any other flat mounting surface that you may want to mount your tripod head to.
RigWheels A-Cup Suction Cup
SKU: AC04
A-Cups are industrial grade camera suction mounts with industry standard 1/4-20″ studs that screw directly into the RigPlate or RigAxles. The Riwgheels A-Cups are appropriate for most applications.
RigWheels B-Cup Suction Cup
SKU: BC04
Rigwheels B-Cups are industrial grade car suction mounts with 5/16″ studs that mount in the outer most holes of the RigPlate. You will notice 3 different versions of suction cups that RigWheels offers.
The B-Cups have more holding power in a straight pull but the main reason to offer the B version is that they have less flex so the overall mount is a bit more solid. The trade off is that they also are more easily removed so if the mount is going to be subject to a lot of outside forces (wind, water, etc…) than the A or C version is recommended.Set inlcludes 4 x CUPS
RigWheels C-Cup Suction Cup
SKU: CC01Rigwheels C-Cups are vacuum action suction mounting cups ideal for the most serious of jobs and placement. This type of vacuum suction cup is one of the most secure and safe options you can use to mount a camera due to the vacuum mechanism maintaining negative pressure inside the cup when in use. There is also a red line that becomes visible when the strength of suction gets low. With 4 of these vacuum suction mounts connected to a RigPlate, this configuration is one of the strongest and most secure suction mounting platforms on the market.The A-Cups are appropriate for most applications.
The B-Cups have more holding power in a straight pull but the main reason to offer the B version is that they have less flex so the overall mount is a bit more solid. The trade off is that they also are more easily removed so if the mount is going to be subject to a lot of outside forces (wind, water, etc…) than the A or C version is recommended.
The C-Cups are for the most serious of jobs with a vacuum pump mechanism to keep the suction cup securely affixed to a surface with a visual safety indicator.
RigWheels Car Strap & Safety Kit
SKU: SK01
This is a great little kit for securing and stabilizing your camera when car mounting as well as other applications. The CineRopes are incredibly useful for all sorts of on-location purposes like securing silks, adding ballast to light-stands, tying down your gear cart etc.Car Strap & Safety Kit incudes
4 x Hood Hook4 x CineRope
RigWheels CineRope
SKU: CR01
CineRopes are an incredibly useful tool for all sorts of on-location purposes like securing silks, adding ballast to light-stands, tying down your gear cart etc… You’ll find yourself using them on a very regular basis. All attaching points are rubber coated.
RigWheels Camera Ladder Mount
We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder.
The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed.
2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others.
Flat Mounting Plates Only
Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter
Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter
Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter
Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.
RigWheels Camera Ladder Mount
We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder.
The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed.
2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others.
Flat Mounting Plates Only
Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter
Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter
Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter
Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.
RigWheels Camera Ladder Mount
We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder.
The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed.
2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others.
Flat Mounting Plates Only
Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter
Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter
Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter
Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.
RigWheels Camera Ladder Mount
We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder.
The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed.
2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others.
Flat Mounting Plates Only
Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter
Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter
Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter
Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.
RigWheels Cloud Mount DSLR
SKU: CM-DS
The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on RigMount XL mounting platform, the RigWheels Cloud Mount DSLR adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the RigWheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position.
Cloud Mount DSLR - In the box
2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)8 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 1″ – Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key
RigWheels Cloud Mount PRO
SKU: CM-P
The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount PRO adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position.
In the box
2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup8 x C-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x Sidecar Tray
RigWheels Cloud Mount SideCar
SKU: CM-SC
The RigWheels Cloud Mount SideCar is the upgraded assortment of parts for out Sidecar/Hostess Tray configuration. This includes all of the parts for the standard (hood/roof/trunk) configuration plus the additional components necessary for the sidecar / hostess tray / underslung configurations. In the box
3 x RigPlate6 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 2″ Thumb Knob4 x 5/16″ x 1″ Thumb Knob2 x 5/16″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup2 x 5/16″ bolt – 7/8″ Long1 x 3/16″ Hex Key1 x 5/32″ Hex Key2 x 5/16″ x 3/4″ Thumb Knob4x 5/16″ Female Thumb Knob
RigWheels Cloud Mount SideCar with Case
SKU: CM-SC-C
The RigWheels Cloud Mount SideCar is the upgraded assortment of parts for out Sidecar/Hostess Tray configuration. This includes all of the parts for the standard (hood/roof/trunk) configuration plus the additional components necessary for the sidecar / hostess tray / underslung configurations. In the box
3 x RigPlate6 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 2″ Thumb Knob4 x 5/16″ x 1″ Thumb Knob2 x 5/16″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup2 x 5/16″ bolt – 7/8″ Long1 x 3/16″ Hex Key1 x 5/32″ Hex Key2 x 5/16″ x 3/4″ Thumb Knob4 x 5/16″ Female Thumb Knob1 x Cloud Mount Travel Case
RigWheels Slingshot 10
SKU: SS-10
The Cloud Mount Slingshot builds on the incredible versatility of the Cloud Mount system by adding a configuration tailored for underslinging your camera/gimbal combination. The new elastic suspension components provide excellent vibration isolation performance for more demanding applications while maintaining the simplicity and practicality that RigWheels in known for.
Just like the standard Cloud Mount configurations, the Rigwheels Slingshot is fully adjustable and scaleable for use with a small gimbal and camera all the way up to full cinema packages using a monster like the Movi XL. Simply change the length/diameter of the cables and/or elastic tubing to tailor the mount to the size of your camera setup and the terrain you’ll be operating on. Tubing and cables are both available in 3 different diameters.
The elastic tubing is fastened to the system using our stainless steel tube connectors. These come with a variety of threading options so they can be placed in many different positions around our mounting plate as well as used with other rigging accessories. The standard positions for the tube mounts are where the Cloud Mount cables clamps are attached to the plate via 1/4-20″ screws.
APPROXIMATE PAYLOAD: 0,00 - 4,54 KG
RigWheels Slingshot 20
SKU: SS-20
The RigWheels Slingshot produces great results but the speed and ease of use of the standard Cloud Mount is essential to have in your arsenal. In many locations you are not able to mount a system which hangs to the outside footprint of your vehicle. The hood/roof/trunk placements of the Cloud Mount are ideal for these scenarios. Like all RigWheels systems the components of the Cloud Mount and Slingshot can be used in many other ways further increasing their net value. When you’re not using the system as a vibration isolator you can use the components as hard mounts etc… If you really want to be efficient with the gear you travel with RigWheels in an excellent choice. In one small case you can carry components to configure our RailDolly, Cloud Mount, Slingshot, RigMount X, RigMount XL, RigSkate and more.
APPROXIMATE PAYLOAD: 0,00 - 9,07 KG
RigWheels Cloud Mount Standard
SKU: CM-FSThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.
Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.
This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position.
In the box
2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key
RigWheels Cloud Mount Standard + CASE
SKU: CM-ST-CThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position.
In the box
2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x HARD CASE
RigWheels Vibration Isolation Unit
SKU: CM-VI
The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.
In the box
2 x RigPlate8 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)
RigWheels E-Cup 10″ Suction Cup
SKU: EC10Sometimes you just need really big suction cups to do heavy lifting. The E-Cup 10″ suction cup comes with a set of 3″ stand offs and a RigPlate mounting platform attached.
€300.00*
gross: €357.00
Pay with:
We ship with:
Fast shipping
Buy VAT exempt with your valid VAT EU ID
B2B Shop - Only for commercial / professional customers
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe payment method:
Stripe payment method
Google Pay payments
Amazon Pay
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
PayPal payments
CAPTCHA integration
Timezone:
The cookie is used to provide the system with the user's current time zone.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Amazon Pay:
The cookie is used for payment transactions via Amazon.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Cookies used for statistics and shop performance metrics.
Google Analytics
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Marketing cookies are used by third-party vendors or publishers to display personalized advertisements. They do this by tracking visitors across websites.
Google Ads:
Dieses Cookie wird gesetzt, wenn ein User über einen Klick auf eine Google Werbeanzeige auf die Website gelangt. Es enthält Informationen darüber, welche Werbeanzeige geklickt wurde, sodass erzielte Erfolge wie z.B. Bestellungen oder Kontaktanfragen der Anzeige zugewiesen werden können.
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Bing Ads:
This cookie is used by Bing to gather anonymous information on how visitors are using the website.
YouTube video
Wishlist
Local Storage:
Stores a timestamp to hide elements for a certain time if desired.
Service cookies are used to provide the user with additional offers (e.g. live chats) on the website. Information obtained via these service cookies may also be processed for site analysis.
Doofinder:
The cookie is used to track user interaction with the site search. The data can be used to optimize the search function.
Shopware Analytics is an analytics service for tracking shopping behavior on this webshop, provided by shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany) in joint responsibility (see also the data protection information). The legal basis for data processing is Art. 6 para. 1 s. 1 lit. a GDPR. If data is stored locally, please refer to our privacy policy for further details on data processing.
The recipient of the data is shopware AG and IT service providers. Technologies used include local storage. The collected data includes customer group, pages visited, click paths, date and time of visit, information about the end device used (resolution, resolution density, operating system), referrer URL, information about the browser used, locale, search queries, time zone. The purpose of data collection is for marketing, analysis, and statistical purposes.
Data processing takes place within the European Union. If you have any questions about data protection, you can contact the data protection officer at legal@shopware.com. Further information can be found at https://www.shopware.com/en/privacy/website.
Stored data:
Shopware Analytics adds the following information to your browser's local storage until consent is revoked: _swa_anonymousId (a unique identifier of the visitor), _swa_userTraits (user traits of the visitor).
Allows Google to collect personal data for online advertising and marketing.
Google Advertising
Meta Pixel:
Cookie from Meta that is used for website analytics, ad targeting and ad measurement.
Microsoft Ads:
Cookie from Microsoft Ads that is used for website analytics, ad targeting and ad measurement.
Pinterest Ads:
Cookie from Pinterest Ads that is used for website analytics, ad targeting and ad measurement.
TikTok Ads:
Cookie from TikTok Ads that is used for website analytics, ad targeting and ad measurement.
Sendinblue:
Sendinblue tracker
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.
