Handles

8Sinn NATO Side Handle

8Sinn NATO Side Handle SKU: 8-SNR60MM 8Sinn NATO Side Handle is an ergonomic side handle, equipped with threaded mounting points and a cold shoe. The presented product can be attached to the left or right side of the cage due to the switchable bracket. Mounting solution for this handle is the Safety NATO Rail (sold separately). Dimensions: Height: 104mm, Length 47-54mm, Width: 34-38mm (+48mm mounting bracket), Weight: 219g Set includes: 1pc 8Sinn NATO Side Handle Key features Double-sided Switchable NATO attachment 1 cold shoe mount 5 x 1/4" threaded mounting point 3/8" mounting point Aluminum + composite material Ergonomic design

€85.00*

gross: €101.15

8Sinn Right Side Wooden Grip with 32mm Arri Rosette

8Sinn Right Side Wooden Grip with 32mm Arri Rosette SKU: 8-RSWG32AR The most ergonomic of all handles. Wooden grip perfectly fitted to almost any palm size. The circuit of the grip and its curvature has been assorted in a way that grasp was natural and optimal for long-term usage. Hand's position from fingers, through the palm to your wrist, does not restrict movement. Additionally, the surface of the grip is extra smooth and it does not irritate your hand at any point. The upper area of the handle settles comfortably in the hollow between your thumb and index finger to keep it steady and safely in your hand. Set includes: 1pc 8Sinn Right Side Wooden Grip with 32mm Arri Rosette Dimensions: Weight: 95g Circuit: 180mm Note: Due to different wooden surfaces the handles' color, tone and shade may vary between each other. Key features Ergonomic Walnut wood Attachment: 32mm Arri Rosette Toolless monting (thumbscrew) Right side compatible

€139.00*

gross: €165.41

8Sinn Safety NATO Rail 60mm

8Sinn Safety NATO Rail 60mm SKU: 8-SNR60MM 8Sinn Safety Nato Rail 60 mm can be used with all kinds of accessories made in NATO Standard It can work with third-party NATO standard accessories. 8Sinn Safety NATO Rail works with top handles, monitor mounts, Arri NATO rosettes, etc. and it can be mounted on every surface equipped with at least 2 x 1/4" threaded openings. Safety NATO Rail has been designed to be a part of quick release systems, which enable the tool-free handling. Dimensions: Length: 60mm, Height: 9mm, Width: 20mm, Weight: 23g Set includes: 1pc 8Sinn Safety NATO Rail 60mm Key features NATO standard 60mm lenght Safety pin Aluminum made

€12.00*

gross: €14.28

8Sinn Safety NATO Rail 90mm

8Sinn Safety NATO Rail 90mm SKU: 8-SNR90MM 8Sinn Safety Nato Rail 90 mm can be used with all kinds of accessories made in NATO Standard. It can work with third-party NATO standard accessories. 8Sinn Safety NATO Rail works with top handles, monitor mounts, Arri NATO rosettes, etc. and it can be mounted on every surface equipped with at least 2 x 1/4" threaded openings. Safety NATO Rail has been designed to be a part of quick release systems, which enable tool-free handling. Dimensions: Height: 10mm, Width: 21mm, Length: 30mm, Weight: 31g Set includes: 1pc 8Sinn Safety NATO Rail 90mm Key features NATO standard 90mm lenght Safety pin 1/4" threaded opening Aluminum made

€19.00*

gross: €22.61

Free shipping

Chrosziel 403-30 Set Leather Handles

Chrosziel 403-30 Set Leather Handles Set Leather Handles, retrectable, swiveling and rotatable handles with HIRTH rosettes connection. Ergonomically shaped hand piece made from genuine leather. Attachable to all cameras and supports with the industry standard rosettes with Hirth-spacing and center M6 screw. The hand piece position on the cranked shaft may be varied between 240 - 400 mm. The shaft diameter is 18 mm. After taking off the cap at the cranked rod side one can turn the rosette for left or right hand use. In the set already factory assembled right and left handle.

€610.20*

gross: €726.14

Free shipping

Chrosziel Handles for Cages and Topplates

Chrosziel Handles for Cages and Topplates SKU: 401-HANDLE Chrosziel Handles for Cages and Topplates, compatible with anti-twist 3/8" safeguards.

€324.90*

gross: €386.63

OConnor O-Grips Double Jointed Set C1244-0002

OConnor O-Grips Double Jointed Set C1244-0002 The OConnor O-Grips Double Jointed Set is a set of modular O-Grips configured to create double handles for custom applications, and can be used for payloads up to 44 lb (20 kg). A titanium core based construction provides rigidity and stability for camera mounted operations. Wide compatibility is offered by the OConnor O-Grips bridge that supports the 15 mm and 19 mm Studio and 15 mm LWS standard rod systems. You can achieve complete spherical stepless articulation owing to the combination of 2 grips constituting the double jointed design. Addition of optional accessories as well as multiple-point connection on to camera systems is possible via the 3/8 stainless steel top screw and 3/8 bottom thread. You can quickly attach and remove the O-Grips system from the camera system using a commonly available 5 mm Allen wrench. Features Set of modular O-Grips configured to create double handles for custom applicationsSupports payloads up to 44 lb (20 kg)Provides rigidity and stability for camera mounted operation via a titanium core based constructionOffers wide compatibility via the O-Grips bridge that supports the 15 mm and 19 mm Studio and the 15 mm LWS standard rod systemsAllows you to achieve complete spherical stepless articulation owing to the combination of 2 grips constituting the double jointed designAllows addition of optional accessories as well as multiple-point connection on to camera systems via the 3/8 stainless steel top screw and 3/8 bottom threadEnables quick attachment and removal from the camera system using a commonly available 5 mm Allen wrench Package includes 4 x O-Grips Single Module C1244-10011 x O-Grips Three-System Rod Bridge C1244-1002

€2,040.00*

gross: €2,427.60

OConnor O-Grips Single Jointed Set C1244-0001

OConnor O-Grips Single Jointed Set C1244-0001 O-Grips Handgrip System includes 2 x O-Grips Single ModuleC1244-10011 x O-Grips Three-System Rod BridgeC1244-1002 The OConnor O-Grips can be used for all common camera systems (possibly via adapter). Single-handle ball joints with high load capacity (i.e. can also be used for large cameras)Each module is a fully adjustable and can be clamped in a full hemisphereStackable modules, i.e. you can put together Double or multi-joint handlesRod Bridge fits all three common rod systems (Studio 15mm, 19mm & Studio LWS 15mm) Constructed with a solid titanium core for extreme durability and reliability, O-Grips feature smooth-functioning, single-handle ball joints with a maximum payload capacity of 44 lbs (20 kg) at 7 in (18 cm) from ball center – making them ideal for work with both smaller and larger cameras. These are the first professional camera handgrips capable of fitting all three standard rod systems (15mm and 19mm Studio, and 15mm LWS) via the single, easy to use O-Grips bridge. OConnor O-Grips can be used with all common camera configurations (several optional accessories will be available). Modular O-Grips are stackable for custom applications and can be configured to create double or even multi-joint handles. Each grip is fully adjustable and is capable of a half sphere of stepless articulation. In addition, by combining two grips, the range can be extended to a complete sphere. Users can easily perform tool-free adjustment and locking of the O-Grips with one hand while operating most camera systems on their shoulder. A 3/8 stainless steel top screw and 3/8 bottom thread enable attachment at many points on a camera system and allow the addition of different accessories to the O-Grips for maximum versatility and functionality. Attaching or removing a single O-Grip Module from the camera system is quick and simple -- a 5mm Allen wrench is all it takes. Attachment 3/8” stainless steel top screw with 3/8” bottom thread. Quick and simple using a 5 mm Allen wrenchCompatible with all common camera configurations with optional accessories. Modular stackable design for custom applications Construction solid titanium corePayload capacity (maximum) 20 kgRod fitting (using O-Grips bridge)15 mm Studio19 mm Studio15 mm LWS

€1,250.00*

gross: €1,487.50

SHAPE Canon C200/C200B Remote Extension Handle + Cable

SHAPE Canon C200/C200B Remote Extension Handle + CableSKU: C200RHElevate your Canon C200 or Canon C200B setup with SHAPE's Remote Extension Handle. Designed for easy attachment to your camera or Baseplate via standard ARRI rosettes, this extension arm brings flexibility to your rig. Enjoy adjustable length and SHAPE's patented Push-button Technology for effortless angle adjustments and full 360-degree rotation. With the simple push, adjust, release, and lock mechanism, you can find your ideal position with ease. The extendable arm also includes a convenient ratchet key for length adjustments of up to 5 cm. Enhance your filmmaking experience with precise control and superior comfort. FeaturesExtendable arm to install Canon C200 & C200B side hand gripFixed on the camera or baseplate with standard ARRI rosettesEasy access to the record start/stop, iris and focus button of the side-hand gripFeatures the patented SHAPE Push-Button with 360-degree rotation for several positioning optionsKnob screw to adjust the length of the extendable armArm length: 17,78 to 22,86 cmEasy to install and adjust

€350.00*

gross: €416.50

SHAPE Canon C500 MKII/C300 MKIII Remote Extension Handle + Cable

SHAPE Remote Extension Handle with Cable for Canon C500 MKII/C300 MKIIISKU: C52RHThe Canon C500 Mark II remote extension handle from SHAPE offers an adjustable arm extension (2 inches) for the side hand grip provided with the Canon C500 Mark II. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm. It is designed with Arri rosettes to mount on the camera or baseplate with standard ARRI rosettes. It also features SHAPE’s patented Push-Button technology for easy angle adjustment and 360-degree rotation. SHAPE is well known for its patented Push-button system, now used by so many professionals in the industry. The technology was developped to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then its lock. Key Features Easy to install and adjustArm length: 17,78 to 22,86 cmDesigned with Arri rosettes to mount on the camera or baseplatePush-Button system with 360-degree rotation for several positioning optionsPush, adjust, release, and then its lockMade of CNC machined aluminum

€360.00*

gross: €428.40

SHAPE Double Quick Handles ARRI Rosette

SHAPE Double Quick Handles ARRI RosetteSKU: HAND10Elevate your filmmaking experience with the SHAPE Double Quick Handle ARRI Rosette Single. This versatile accessory is designed to attach to cameras or camera support equipment featuring standard ARRI rosettes. With three points of articulation, including two Push-button joints and one ratchet knob, you can effortlessly adjust it for your comfort.The handle securely locks in place through ARRI-compatible rosettes with spring-loaded levers. It offers multiple mounting options with two 1/4-20 and two 3/8-16 threaded holes, complete with locking attachment stoppers for your camera accessories. Thanks to SHAPE's renowned Push-button technology, you can make quick and precise adjustments, including a 360-degree rotation to position the handle exactly as needed. Trust in this industry-trusted handle to enhance your creative capabilities.FeaturesQuick release handgrips with multiple points of adjustmentPatented Push-button technologyPush, adjust, release, and then its lockRubber handgrips for stability and precisionStainless steel locking mechanism for durability1/4-20 and 3/8-16 threaded holes with locking stoppers

€600.00*

gross: €714.00

Free shipping

Shape HAND5 Handgrip

Shape HAND5 SKU: HAND5 Handrgrip with bracket for 15 mm tubes for video and DSLR cameras For use with light-weight supportsClamping to Ø 15 mm tubesEach handle can be rotated by 360 °

€349.00*

gross: €415.31

Free shipping

SHAPE LNDA Quick Handle ARRI Rosette (Long)

SHAPE LNDA One pair of ARRI Rosette-compatible handgrips that can be attached to cameras or camera support hardware. Each arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing for nearly endless configurations. The arms mate with ARRI Rosettes using spring-loaded locking levers. SHAPE’s Push-button handle has been adopted by many professionals in the industry for its ease of use and strong, positive lock. We developed this patented technology to give users quick and easy adjustment of the rig. By simply pressing the button, the hub unlocks to allow 360-degree free rotation. Release, and the hub locks together; push, adjust, release. The Push-button system on the handle joint provides quick articulation near the rosette, while a second push-button joint allows you to rotate and precisely position the rubber handgrips. Key Features Optimized machining Technique without visible mechanical assemblyMade of lightweight machined aluminum 7075 GradeInspired by Generative Design8’’ / 20.3 cm in length (main section)One-third lighter than previous versionsQuick release handgrips with multiple points of adjustmentCompatible with ARRI RosettesPatented Push-button technologyPush, adjust, release, and then its lockedRubber handgrips for stability and precisionLocking mechanism for durability, and lifetime warrantyCNC machined aluminum

€1,350.00*

gross: €1,606.50

Free shipping

SHAPE MNDA Quick Handle ARRI Rosette (Medium)

SHAPE MNDA One pair of ARRI Rosette-compatible handgrips that can be attached to cameras or camera support hardware. Each arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing for nearly endless configurations. The arms mate with ARRI Rosettes using spring-loaded locking levers. SHAPE’s Push-button handle has been adopted by many professionals in the industry for its ease of use and strong, positive lock. We developed this patented technology to give users quick and easy adjustment of the rig. By simply pressing the button, the hub unlocks to allow 360-degree free rotation. Release, and the hub locks together; push, adjust, release. The Push-button system on the handle joint provides quick articulation near the rosette, while a second push-button joint allows you to rotate and precisely position the rubber handgrips. Key Features Optimized machining Technique without visible mechanical assembly.Made of lightweight machined aluminum 7075 Grade.Inspired by Generative Design.5 1/2’’ / 14 cm in length (main section).One-third lighter than previous versions.Quick release handgrips with multiple points of adjustment.Compatible with Arri Rosettes.Patented Push-button technology.Push, adjust, release, and then its locked.Rubber handgrips for stability and precision.Locking mechanism for durability, and lifetime warranty.CNC machined aluminum.

€1,250.00*

gross: €1,487.50

SHAPE Single Handle ARRI Rosette

SHAPE Single Handle ARRI RosetteSKU: HAND1Single ARRI Rosettes handgrip that can be attached to cameras or camera support hardware that has standard ARRI rosettes. The arm features two points of articulation (1 Push-button, 1 ratchet knob) allowing you to adjust the arm for your comfort.The Push-button allows you to rotate and precisely position the rubber handgrips. The ratchet knob lever near the rosette allows additional articulation of the handle at this level. The arm attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Key FeaturesSingle red knob for fast & easy adjustment2 points of adjustmentErgonomic handles with rubber handgrips for stability and precisionPatented Push-button system allows 360-degree rotationCNC machined parts and hard anodized aluminum for resistanceStainless steel locking mechanism for durability

€240.00*

gross: €285.60

Free shipping

SHAPE SNDA Quick Handle ARRI Rosette (Small)

SHAPE SNDA One pair of ARRI Rosette-compatible handgrips that can be attached to cameras or camera support hardware. Each arm features three points of articulation (2 Push-button, 1 ratchet knob) allowing for nearly endless configurations. The arms mate with ARRI Rosettes using spring-loaded locking levers. SHAPE’s Push-button handle has been adopted by many professionals in the industry for its ease of use and strong, positive lock. We developed this patented technology to give users quick and easy adjustment of the rig. By simply pressing the button, the hub unlocks to allow 360-degree free rotation. Release, and the hub locks together; push, adjust, release. The Push-button system on the handle joint provides quick articulation near the rosette, while a second push-button joint allows you to rotate and precisely position the rubber handgrips. Key Features Optimized machining Technique without visible mechanical assembly.Made of lightweight machined aluminum 7075 Grade.Inspired by Generative Design. 4’’ / 10 cm in length (main section). One-third lighter than previous versions. Quick release handgrips with multiple points of adjustment. Compatible with Arri Rosettes. Patented Push-button technology. Push, adjust, release, and then its locked. Rubber handgrips for stability and precision. Locking mechanism for durability, and lifetime warranty. CNC machined aluminum

€1,150.00*

gross: €1,368.50

Free shipping

Shape SONY FS5 remote extension handle

Shape SONY FS5 remote extension handle SKU: FS5RH With the success of the remote extension handle for the Sony FS7, Shape designed a similar solution adapted for the handle of the PXW-FS5. The handle is fixed with a SHAPE Standard ARRI rosette that you install on the camera. The handle is then secured with a ratchet knob screw on the rosette. The remote extension handle includes patented red push button technology that allows the handle a 360 degrees of rotation. The simplest way to adjust a handle! With a press of your thumb, you can adjust the angle of the handle; this will make your work easier. The length of the arm is 14cm (5 5/8”) and the adjustment length is 5 cm (2”). The Sony handle is fixed on the extension arm with the same mechanism used to install the handle on the camera. Includes patent red push button with 360 degrees of rotation for several positioning optionsKnob screw to adjust the arm lengthFixed on the camera with a SHAPE standard ARRI rosette (included with the extension arm) and a ratchet knob screwThe SONY handle is fixed on the extension arm with the same system as on the cameraAdjustment length up to 5 cm (2 inches)Male-female extension LANC cable includedEasy to install and adjust, no tools required after the installation

€410.00*

gross: €487.90

SHAPE Sony FX6 remote extension handle + cable

SHAPE Remote Extension Handle with Cable for Sony FX6SKU: FX6RHThe Remote Extension Handle for the Sony FX6 Camera from SHAPE is a variable-length adjustable handle designed to reposition the FX6 remote grip away from the camera while retaining full remote functionality. Compact for both storage and travel, the arm measures just 5.6″ when folded and may be increased to a maximum length of 11″ for use.A length adjustment range of 2″ is also provided to the user for a more customized and comfortable fit. The handle easily mounts to the Sony FX6 camera using an ARRI-style rosette connection and knob screw on one side, and a native Sony grip connection on the other. An included male-to-female LANC extension cable connects the remote grip to the camera’s body, maintaining full functionality after relocation.The coiled male-to-female cable features a LANC 3.5 mm male connector on one end and female on the other. It measures 10″ from end-to-end when coiled, and approximately 20″ when extended. The arm itself features SHAPE’s patented push-button release which allows the joint to be rotated a full 360° to any required angle. SHAPE is well known for its patented push-button system, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustments. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then it’s locked!

€390.00*

gross: €464.10

Shape Sony FX9 remote extension kit

Shape Sony FX9 remote extension kit SKU: FX9RH The Sony FX9 remote extension handle from SHAPE offers an adjustable arm extension (2 inches) for the side hand grip provided with the Sony FX9. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm. It is designed with Arri rosettes to mount on the camera or baseplate with standard ARRI rosettes. It also features SHAPE’s patented Push-Button technology for easy angle adjustment and 360-degree rotation. SHAPE is well known for its patented Push-button system, now used by so many professionals in the industry. The technology was developped to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then its lock. Key Features Compatible with Sony FX9 Easy to install and adjust Designed with Arri rosettes to mount on the camera or baseplatePush-Button system with 360-degree rotation for several positioning optionsPush, adjust, release, and then its lock Made of CNC machined aluminum

€235.00*

gross: €279.65

Free shipping

SHAPE Telescopic Black Handle Arri Rosette Cuffs Kit

SHAPE Telescopic Black Handle Arri Rosette Cuffs Kit SKU: CUFKIT Not only can you switch between 15 to 19 mm LWS or Studio – you won’t need to remove your accessories to do it. Connect the Arri Rosette Handles to the rod block, clip the rod block onto your rig, and you’re good to go. Case included. Use the screwdriver included in the Cuff Kit to shorten the Telescopic Handles to 3”. When you’re short on space, it makes all the difference. Since our Handles offer 360 degrees of adjustment, you can clip the cuff kit above or below the rods – make it comfortable! 15 mm LWS cuff rod block Arri rosette (CUF15) 15 mm LWS cuff rod block Arri rosetteThe SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm lightweight rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. 15 mm studio spacing cuff rod block Arri rosette (CUFST) 15 mm studio spacing cuff rod block Arri rosetteThe SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. 19 mm studio cuff rod block Arri rosette (CUF19) 19 mm studio cuff rod block Arri rosetteThe SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 19 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. Telescopic SHAPE black handle Arri rosette (HAND12SHADOW) Telescopic SHAPE black handle Arri rosetteLeft and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

€1,620.00*

gross: €1,927.80

SHAPE Telescopic Handles ARRI Rosette HAND12

Colour: Red

SHAPE Telescopic Handles ARRI RosetteLeft and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry.The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. Key FeaturesLeft and right telescopic handgrips each featuring 4 points of articulation and ARRI rosettesExtends up to 2 inches and rotates throughout 360°Markings on extendable arm to help you remember your preferred settingsPatented Push-button system for fast adjustmentPush, adjust, release and its lockLet you move quickly between known setupsRubber handgrips for stability and precisionMade of CNC machined aluminum for resistance

€1,270.00*

gross: €1,511.30

SHAPE Telescopic Handles ARRI Rosette HAND12SHADOW

Colour: Black

€1,270.00*

gross: €1,511.30

SHAPE Telescopic Single Handle ARRI Rosette Left Side

SHAPE Telescopic Single Handle ARRI Rosette Left SideSKU: HAND3Left telescopic handgrip with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. The arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. Key FeaturesLeft telescopic handgrips with ARRI rosettesLet you move quickly between known setupsArm features 4 points of articulationArm extend up to 2 inches and rotates throughout 360°Markings on extendable arm help you remember preferred settingsPatented Push-button system for fast adjustmentPush, adjust, release, and then its lockRubber handgrips for stability and precisionMade of CNC machined aluminum for resistance

€650.00*

gross: €773.50

Tilta Advanced Side Wooden Handle Type IX Black

Tilta Advanced Side Wooden Handle Type IX BlackSKU: TA-AWH9-P-BThese Wooden Handles feature an ergonomic design in order to provide maximum comfort when operating a camera of any size. They can attach directly to your Ronin 4D Camera Body or to the sides of the DJI High Bright Remote Monitor. This makes these the perfect option for comfortably handling your camera or monitor when electronic control is not needed. A Release Button on the side of the mount allows you to easily adjust the angle of the handles to help you find the perfect operating position as well as to re-position quickly when adjusting for different shots. These handles are carved from black walnut wood and further assembled with CNC-milled high grade aluminum-alloy. In the box1 x Tiltaing Advanced Right Side Wooden Handle – Black (TA-ARWH-B)1 x Tiltaing Advanced Left Side Wooden Handle – Black (TA-ALWH-B)1 x Tiltaing Advanced Left Side Handle Attachment Type IX – Black（TA-AHA9-L-B）1 x Tiltaing Advanced Right Side Handle Attachment Type IX – Black（TA-AHA9-R-B）

€239.00*

gross: €284.41

Filter products

The professional source for Filmmakers in Düsseldorf

We provide best equipment and advice in the field of professional video- and audio- technology