Motion- Time Lapse Control

Free shipping

CamDo BlinkX Time Lapse Controller for GoPro

CamDo BlinkX Use CamDo BlinkX to achieve long term time lapse and/or motion detection for your next project. Just plug it into your GoPro HERO5, HERO5 Session, HERO6, HERO7, HERO8 and use the BlinkX app to connect and configure up to 9 separate time lapse schedules using a smartphone, tablet, computer, or any WiFi enabled device which has a web browser (no cell service or internet connection required). A WiFi network with internet access is only required if you would like to use our optional Blink Email feature to provide daily status updates straight to your inbox. If you are looking at a long term time lapse you may be interested in the general time lapse and construction time lapse packs which incorporate an external solar system for long term deployment or where finding a power supply is difficult or expensive. Here are all the new advantages of BlinkX over Blink Compatible with GoPro HERO5, HERO5 Session, HERO6, HERO7, HERO8Camera WiFi Control (for manual download of data or aligning setup through GoPro app)Time and Date Scheduling (Allows camera to be set up before a project starts without wasting images/power)In-built WiFi enable button (no longer need a wired remote trigger)On board Real Time Clock (Holds date/time if left unpowered for up to 2 years)Lower Power Consumption (~10x power savings in between schedules)Improved user interface (web based setup on your device)Simplified poweringUniversal strap mount (allows for mounting in multiple ways)

€250.00*

gross: €297.50

Details

Free shipping

CamDo PowerUp Construction Time Lapse solution

UpBlink Intervalometer Options: GoPro HERO5 - HERO8

CamDo PowerUp CamDo PowerUp includes: UpBlink, DryX, Bracket, Cables ATTENTION: NO CAMERA (GoPro/ Sony) included

€1,500.00*

gross: €1,785.00

Free shipping

CamDo PowerUp Construction Time Lapse solution

UpBlink Intervalometer Options: GoPro HERO10 - HERO12

CamDo PowerUp CamDo PowerUp includes: UpBlink, DryX, Bracket, Cables ATTENTION: NO CAMERA (GoPro/ Sony) included

€1,500.00*

gross: €1,785.00

Free shipping

CamDo PowerUp Construction Time Lapse solution

UpBlink Intervalometer Options: Sony DSC RX0

CamDo PowerUp CamDo PowerUp includes: UpBlink, DryX, Bracket, Cables ATTENTION: NO CAMERA (GoPro/ Sony) included

€1,500.00*

gross: €1,785.00

Free shipping

CamDo SolarUp 180312k

UpBlink Intervalometer Options: GoPro HERO5 - HERO8

CamDo SolarUp CanDo SolarUP Includes: UpBlink, DryX, SolarX, V50, Bracket, Cables. ATTENTION: NO CAMERA (GoPro / Sony) included

€1,950.00*

gross: €2,320.50

Free shipping

CamDo SolarUp 180314k

UpBlink Intervalometer Options: Sony DSC RX0

CamDo SolarUp CanDo SolarUP Includes: UpBlink, DryX, SolarX, V50, Bracket, Cables. ATTENTION: NO CAMERA (GoPro / Sony) included

€1,950.00*

gross: €2,320.50

Free shipping

CamDo SolarUp 180322k

UpBlink Intervalometer Options: GoPro HERO10 - HERO12

CamDo SolarUp CanDo SolarUP Includes: UpBlink, DryX, SolarX, V50, Bracket, Cables. ATTENTION: NO CAMERA (GoPro / Sony) included

€1,950.00*

gross: €2,320.50

Free shipping

CamDo UpBlink Time Lapse Controller 180309K

UpBlink Intervalometer Options: Sony DSC RX0

CamDo UpBlink SKU: 180278 CamDo UpBlink is a time Lapse controller for GoPro HERO5 -HERO8 / Sony DSC-RX0 with image Upload to CloudX Pro. Web-app, low power & WiFi brings: Easy to use, 4K time lapse for less! Use UpBlink to achieve long term time lapse and/or motion detection for your next project. Just plug it into your GoPro and use the UpBlink app to connect and configure separate schedules (including email scheduling) using a smartphone, tablet, computer, or any WiFi enabled device which has a web browser (app connection is directly with UpBlink so no cell service or internet connection required). Features Compatible with GoPro HERO5 BlackCamera WiFi Control Time and Date Scheduling (Allows camera to be set up before a project starts without consuming power to capture unneeded footage or adjusting interval times between set dates)On board Real Time Clock (Holds date/time if left unpowered for up to 2 years)Improved user interface (web based setup on your device)Universal strap mount allows for mounting in multiple ways Simple Configuration for Complete Control Intuitive web interface makes scheduling UpBlink a breeze.Customize a daily or weekly schedule to program up to 4 separate schedules for time lapse using photo, day, night, burst or video modes.Set flexible cloud upload schedules powerLow Power Consumption UpBlink powers your GoPro camera down between intervals, increasing the battery life significantly and giving you the ability to undertake long term time lapse sequences. emailCloudX Image Upload and Email Notifications Using CloudX, receive an e-mail every day to confirm your system is still operating - how many shots were taken since the last e-mail, what is the battery status, what is the SD card status - everything to give you peace of mind your system is working. Set a cloud upload scheduleUpload all images or flexible upload options to conserve bandwidth including: Lower resolution uploads / Latest image only photo_cameraNo Camera Firmware Update Required UpBlink doesn’t require any special camera firmware update. Just ensure your HERO5 Black camera is up to date with the latest firmware from the GoPro website or through the GoPro App for iOS and Android. settings_remoteMotion Detection (coming soon) Motion detection schedules can be programmed to only be active only during certain times of day to avoid capturing unneeded footage and conserve power.Motion detection can be used independently and simultaneously with time lapse schedules.Motion detectors compatible with UpBlink. Please contact CamDo to confirm when this feature will be available. date_rangeLong Term Time Lapse Couple UpBlink with CAMDO SolarX or CAMDO DryX for long term time lapse solutions.

€550.00*

gross: €654.50

Free shipping

CamDo UpBlink Time Lapse Controller 180310K

UpBlink Intervalometer Options: GoPro HERO5 - HERO8

€550.00*

gross: €654.50

CamDo UpBlink Time Lapse Controller 180319K

UpBlink Intervalometer Options: GoPro HERO10 & HERO11

€550.00*

gross: €654.50

edelkrone DollyONE v1

edelkrone DollyONE v1 edelkrone DollyONE v1 is an ultra portable, motorized table-top dolly to create linear or curved camera motions on flat surfaces + wireless connectivity with edelkrone motorized heads. Linear virtual track DollyONE provides linear slides by default. You can either use it for regular slide motion or dolly in/out shots. You can easily select several points on the straight line and make DollyONE slide to any of those points. You can also put DollyONE in a loop between any of the two points. Curved virtual track (360°) DollyONE can create a circular path around any target you choose. The easy path creation wizard will let you create the desired curved track easily. No measuring tools required. You can later select several points on the curved path and make DollyONE go to any of them for amazing parallax shots. You can also put it in a loop between any two points for interview shots. Connects wirelessly to edelkrone Heads Having a motorized head onDollyONEopens the door to amazing 2-, 3- or 4-axis camera motions which can be easily programmed and repeated. You can record never-before-seen, amazing motion time-lapses and visual effects shots with these combinations. The devices pair instantly in the background while using the same App or controller to control all devices together. Super easy time-lapse programming Setting up a motion time-lapse is the easiest with edelkrone App. In your time-lapse videos, you can have a simple transition between two keyposes or you can convert a recorded complex camera motion into a time-lapse with a single button. You can use edelkrone’s unique Dynamic Interval and Dynamic Step Size Technologies to introduce never-before-seen effects to your time-lapses which bend the speed of time and speed of camera motion independently of each other. Operate with the edelkrone App edelkrone App cleverly scans the available devices in its surroundings and pairs with them automatically, giving you a single screen to control all devices together.

€446.22*

gross: €531.00

edelkrone DollyPLUS v2

edelkrone DollyPLUS v2The EdelKrone DollyPLUS v2 is a motorized, tripod-mountable dolly that enables precise linear and curved camera movements. With hyper-accurate motion tracking, compact form, and support for large-scale dynamic shots, it's a must-have for professional cinematographers demanding smooth, adaptive motion on flat surfaces.Unlock the Era of Hyper Tracking Shots with the EdelKrone DollyPLUS v2- a groundbreaking motorized dolly engineered for cinematic camera movement on flat surfaces. Whether you're executing long linear glides or smooth curved paths, this dolly offers flawless fluidity and infinite creative freedom, limited only by your space.DollyPLUS v2 features Edelkrone’s acclaimed Point Tracking Technology, enabling complex motion control and perfect subject lock without spatial restrictions. When paired with the HeadPLUS, it unlocks real-time position syncing for hyper-accurate tracking shots, elevating your production quality with ease.Equipped with two high-torque stepper motors, DollyPLUS ensures ultra-precise movement with less than 1cm of deviation - even over long distances. It's not just a powerhouse for large-scale scenes; DollyPLUS also works seamlessly for subtle dolly movements, acting as a compact slider alternative when needed.Its smart design allows for easy manual repositioning, making setup and location shifts intuitive and fast. Perfect for studios and large-scale productions alike, the EdelKrone DollyPLUS v2 offers professional-level motion control with unmatched versatility. FeaturesMotorized linear & curved movement on flat surfacesPoint Tracking Technology for perfect subject lockWorks with HeadPLUS for hyper-accurate motion syncingStepper motors ensure precision with <1cm deviationDoubles as a compact slider for close-up motionEasy manual repositioning - no tools or resets neededTripod-mountable for stable, high-angle shotsHeavy-duty design with compact footprintSpecificationsMovement Type: Linear & curved motion (motorized)Tracking System: Point Tracking TechnologyMotor Type: Dual stepper motorsMotion Accuracy: Less than 1cm deviation over long distancesMounting: Tripod-compatibleCompatibility: Integrates with HeadPLUS for full tracking functionalityPower Supply: Sony NP-F battery bracket (batteries not included)

€2,226.63*

gross: €2,649.69

edelkrone Focus/Zoom Module v1

edelkrone Focus/Zoom Module v1New Lens Controller allows you to control your lens position by hand, similar to adjusting pan & tilt angles and slide positions of other motion controllers in the edelkrone ecosystem. Just set your camera’s position by hand, focus on your object, and store that multi-axis keypose for later use! Depending on your production needs, control Lens Controller through edelkrone App (6 independent keyposes) or edelkrone Controller (3 independent keyposes).A single LP-E6 battery can power Lens Controller for maximum portability or an external DC input can power Lens Controller for those long productions. Lens Controller even includes a Link port for future extensibility. Technical dataSize: (L x W x H) 120 x 55 x 31 mm actual size (rod clamp & battery are not included)Weight: 261 gr. actual weight (rod clamps, rods and battery are not included)Gear pitch: Standard 0.8 mm pitch gear (all professional cinema lenses)Lens compatibility All lenses with the included edelkrone lens gear ring. Not compatible with servo lenses (focus by wire)Number of axes: Single (Focus or Zoom)Motor type: Brushless motor with ultra high-res encoderPower input: LP-E6 type battery (NOT included), AC/DC adapter (included)Compatibility: HeadPLUS also works as a stand alone device (connects directly to edelkrone App)Materials: CNC machined aluminum and stainless steel componentsCompatible LensesHard-stop lenses: Mechanical focusing with a hard stop on the ends of focus limits. Focus wheel rotates for approximately 30 seconds, or until it reaches a hard stop. Infinity lenses: Mechanical focusing with no hard stops on the ends of focus limits. Focus wheel rotates infinitely without adjusting the lens elementsLens Controller only works with hard-stop lenses and infinity lenses. Doesn’t work with Servo / Focus by wire lenses. Box ContentFocus/Zoom Module15mm rod15 mm rod clamp19 mm rod clamplens calibration chart & stand1 x lens gearAC/DC Adapter

€446.22*

gross: €531.00

edelkrone HeadONE v2

edelkrone HeadONE edelkrone HeadONE is a pocket-sized, ultra smooth Pan and/or Tilt motor for stunning motion-controlled videos and time-lapses. edelkrone HeadONE connects wirelessly to edelkrone sliders and dollies but you may also attach it to sliders, tripods, dollies, and other supports as well as placed directly on flat surfaces . Via an iOS/Android app you may choose between motion-controlled panning shots, time-lapse sequences, stop-motion shots, and 360 panorama photo capture. Two HeadONE with dedicated bracket give you combination of turntable kit for product shots. Size (L x W x H): 99 x 95 x 47.5 mmWeight: 580 gRecommended camera load Pan: 6.8 kgMounting options: 3/8"-16 mounting screw on top. 3/8"-16 mounting port on bottom. (3/8"-16 to 1/4"-20 reducer bushing for mounting port are provided.)Min. step size: 0.00061 degreeMax. speed: 25.7 degree/secNumber of axes: SingleMax. rotation: ∞ x 360°Motor type: Step motor with ultra high-res encoders.Supported fps: AllPower input: Requires x1 Canon LP-E6 type battery to operate. Battery bracket included. Battery not included.Battery life: To be announced.Shutter trigger cable socket: 2.5 mm (shutter trigger cable sold seperately)Can be paired: SliderONE v2, Slide Module v2, DollyONE, DollyPLUSMobile device connection: Bluetooth low-energy communication.App. compatibility: iOS 11.0 or later & Android 5.0 or laterMaterials: CNC machined aluminum & stainless steel components

€401.51*

gross: €477.80

edelkrone Pan Module v1 for JibONE

edelkrone Pan Module v1 edelkrone Pan PRO is a heavy-duty, pan head solution designed to work perfectly with JibONE, edelkrone Sliders, and Dollies. The devices pair instantly in the background and can be managed altogether using the edelkrone App or edelkrone Controller. This instant connection allows you to quickly automate and program the most creative camera motions with ease. Key Features of Pan PRO Ultimate panning ability for heavier camera setupsProvides an additional panning axis when paired with JibONEOur quietest motorized product yet - perfect for interviews! Can be hand-controlledHigh carrying capacity, compact designFast to set up, easy to relocateMacro-precise, loopable motionConnects wirelessly to JibONE, Sliders, & Dollies Can be hand-controlled You can manually adjust the pan angle with Pan PRO. Instead of relying on a remote control, you can program your camera motions with just your hands! This gives an unprecedented speed to your workflow, and makes the whole process much more intuitive. High carrying capacity, compact design Pan PRO is capable of carrying heavy professional cameras, as well as the entire JibONE setup. Similar to all edelkrone products, Pan PRO features a portable, compact design. Unlock a new axis for a full JibONE experience Pan PRO is an add-on to the jib solution, designed to add a panning axis to JibONE. Simply attach Pan PRO between your tripod and JibONE to unlock this new axis. Add HeadPLUS to this bundle and obtain an unlimited motorized jib experience. (Only a single Pan PRO can be paired with this bundle.

€535.64*

gross: €637.41

edelkrone Slide Module V2 for SliderPLUS

edelkrone Slide Module V2 This innovative module is designed to enhance your filming experience, providing smooth and precise sliding movements for your camera. Crafted by the renowned brand edelkrone, known for their high-quality and cutting-edge camera equipment, this Slide Module V2 is a must-have for any filmmaker or videographer. It is specifically designed to work seamlessly with the SliderPLUS, making it the ultimate duo for capturing stunning footage. The Slide Module V2 is incredibly versatile, allowing you to control the speed and direction of your camera's movement with ease. It features a built-in motor and a powerful gearbox, ensuring smooth and silent operation. With its precise motion control, you can achieve professional-level shots effortlessly. This module is also equipped with a smart controller, giving you the ability to program and save your desired camera movements. This means you can easily recreate your favorite shots or experiment with new ones, all with just a touch of a button.The edelkrone Slide Module V2 is compact and lightweight, making it easy to transport and set up on any shoot. It is also compatible with various cameras and can support up to 15 lbs of weight, making it suitable for a wide range of filming needs. Upgrade your filming game with the edelkrone Slide Module V2 for SliderPLUS. With its advanced features and exceptional performance, it is the perfect tool for taking your videos

€343.17*

gross: €408.37

edelkrone Vision Module v1 for HeadPLUS / Head PRO v2

edelkrone Vision Module The world's smartest motorized motion control system just got a lot wiser. Vision Module, which attaches on HeadPLUS, adds groundbreaking features like automatic face tracking and wireless video transmission to your phone. Vision Module adds smart, responsive & fully automated camera movements to your production that make working with moving subjects easier than ever. Vision Module instantly locks on to the face you select with a single tap from your edelkrone App and tracks its movement utilizing the motorized mechanism of HeadPLUS or HeadPLUS PRO. Vision Module flawlessly connects & communicates with your entire edelkrone ecosystem to make your workflow even more efficient. Available on iOS & Android. Everything your camera sees, you can see on your mobile devices by adding edelkrone Vision Module to your setup. When combined with HeadPLUS or HeadPLUS PRO, Vision Module allows you to see what you’re tracking through Vision mode as well as Keypose & Target modes using edelkrone App. Alternatively, edelkrone Vision Module can be used on its own for video transmission from your camera to your mobile device without the need for any additional equipment.The reliability and quality of the live feed will depend on your network connection.

€580.36*

gross: €690.63

Filter products

The professional source for Filmmakers in Düsseldorf

We provide best equipment and advice in the field of professional video- and audio- technology