Tilta Hydra Predator Shock Absorbing Arm HDA-T05-AB

TILTA Hydra Alien PRO KIT The Hydra Alien Pro Kit offers a complete package for flexible car mounting while including additional accessories to offer more accurate control and improved ease of use. The Pro Kit features the Remote Control Kit which offers full wired or wireless control of the DJI RS 2 and includes the Hydra Alien Monitor Bracket which makes it easier to monitor your footage while controlling the RS 2. The Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography. The system utilizes a highly customizable combination of dovetail-like plates and suction cups that can support a payload of 50kg each. Highly elastic shock-absorbing silicon provides longer durability and less abrasion, while the updated suction cup plungers create a stronger seal for improved security in colder weather. When interconnected, the system allows users to fine-tune the exact placement of their shot to achieve almost any angle possible when mounting to a vehicle. The system also uses a shock absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down. The newly included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal. The Hydra Alien supports full wireless control of the RS2 via the included Remote Control Kit for RS2 which allows you to control your RS 2 gimbal’s settings as well as the record and photo functions of your camera via either a wired or wireless connection. It also includes a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating. The new Hard Shell Safety Case is designed to store and protect the Hydra Alien. This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use. The waterproof design protects the case and equipment from hazards like rain and snow. This case functions as a replacement for the one included with the Hydra Alien, but can also be used to store other equipment if needed.

RigWheels Cloud Mount Standard SKU: CM-FSThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available. Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle. This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key

RigWheels Cloud Mount Standard + CASE SKU: CM-ST-CThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x HARD CASE

RigWheels Cloud Mount PRO SKU: CM-P The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount PRO adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup8 x C-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x Sidecar Tray

RigWheels Cloud Mount DSLR SKU: CM-DS The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on RigMount XL mounting platform, the RigWheels Cloud Mount DSLR adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the RigWheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. Cloud Mount DSLR - In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)8 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 1″ – Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key