RigWheels RigAxle RA01

RigWheels RigMount X8 RigMount magnetic camera mounts are a new approach to portable camera support for both photo and video cameras. With industrial grade high-power rare-earth magnets these magnetic camera mounts will amaze you with their strength when affixed to a steel surface. With the ability to magnet mount the possibilities are endless for placing your camera in the perfect position to get the perfect shot. The ease and quickness of the RigMount X will make this magnetic camera mount configuration your ‘go to’ tool for fast and easy camera placement.The great thing about mounting a camera with a RigMount magnetic camera mount is that once it is safely attached to a steel surface, it will never loose it’s holding power. This gives you peace of mind and better results as well. Many other mounting devices can sag or detach. When you mount your camera with aRigWheels RigMount you can be confident that your frame will stay exactly where you want it. If shooting in extremely hot or cold weather RigMounts are perfect as they are not affected by temperature unlike suction cupsSuction mounts are prone to vibration because of the rubber components. Because this magnet camera mount uses less rubber material than suction mounts your shots will be more stable with less vibration. The rubber coating on RigMount magnetic mounts is just enough to protect the surface you are mounting to from being scratched while not depleting the strength of the magnet.RigMount X8 comes with 8 individual RigWheels RigMount magnet mounts which attach to the RigPlate. You can also use the parts separately for mounting point-and-shoot and action cameras like the GoPro. In the box 1 x RigPlate2 x RigAxle4 x 5/16″ bolt – 2″ Long8 x 5/16″ Washer8 x RigMount Magnetic Mount – Long1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer Available variantsRigMount X4 (4 magnets with up to 200 lbs / 90.72 kg of holding strength)RigMount X6 (6 magnets with up to 300 lbs / 136.08 kg of holding strength)RigMount X8 (8 magnets with up to 400 lbs / 181.44 kg of holding strength)

RigWheels RigPlate SKU:RP01 RigPlate is one of the most versatile pieces of camera mounting hardware you can own. Versatility is king at RigWheels. RigWheels designs everything with versatility in mind and the RigPlate camera cheese plate delivers. The first function is to serve as a camera mounting plate to attach MicroWheels to. One RigPlate and one set of MicroWheels provides you with smooth movement as a table-top / skater dolly that you can use on any smooth hard surface.Using Rigwheels RigPlate as a pipe dolly gives you scalable slider / dolly option that is tailored for the new generation of mid-size and compact cameras. Attaching two RigPlates together creates a captive-rail camera carriage that allows secure camera movement at any angle. Using RigPlate in conjunction with RigAxels adds even more capability to this simple affordable system with a more traditional table-top dolly setup and a robust pipe-dolly option.RigPlate is a great camera support platform and it can be used for much more than camera movement. With the amount and variety of mounting points there are an endless variety of accessories that can be attached. There are (14) 1/4-20 and (4) 3/8-16 threaded holes (industry standard sizes) in addition to four 5/16” and five 3/8” pass through holes. A RigPlate can be turned into a rock-solid suction mount by adding A-Cups, B-Cups or C-Cups. One thing we’re excited about is our new RigMount products. New camera technology allows us to use magnets which would have never been considered a few years ago when using video tape. The hi-power RigMount magnetic mounts provide a new solution for mounting cameras in unique and different ways. A single RigMount is also a great solution for mounting sports/action cameras and smaller still cameras.

RigWheels RailDolly Carriage only SKU: RD01 If you want to DIY your own end-brackets you can purchase just RailDolly carriage and get the same smooth movement as in more complete systems.The RailDolly Carriage has a large footprint and provides great stability when using a full-size cameras.The RailDolly is also a good option for critical audio recording because operation is silent with it’s semi-soft wheels. This configuration uses one RigPlate, two RigAxles and two different types of skate wheels. The RailDolly Camera Slider can also be used on square or rectangular rails. Square/rectangular rails are much more rigid at long lengths than tube/pipe so if you’re going to be putting a BIG camera rig in motion this is an ideal option. With the components in this kit you can also configure our RigSkate so you get 2 great options for movement. If attaching a ball mount tripod head you will need one of our Bowl Mount Adapters. This configuration also included the parts to configure our RigSkate so you get 2 great options for movement.

RigWheels MicroWheel Stage-2 SKU: MWS2 The MicroWheel Stage 2 combines 6 MicroWheels, 1 RigPlate and 1 RigAxel to make a captive rail linear slider. The captive carriage configuration makes your camera much more secure by locking it onto the rails. This setup also allows you to position the carriage/rails at any angle; just the trick for vertical or slanted moves. This kit offers a similar captive rail option to the MicroWheel Stage 3 carriage at a lower price but is not as suitable for handling vertical and angled movement. RigWheels linear slider kits and parts are designed for easy expansion and and multifunction use. This linear slider kit allows you to operate on smooth flat surfaces (such as a counter top or glass table) as well as on pipe as shown below. MicroWheel camera dolly wheels will run on any smooth pipe with an outside diameter between 1″ & 2″. In addition to the variety of styles of movement you can achieve with this kit, you always have the ability to increase functionality by adding different parts. For example, you can add 1 more RigAxel and 4 inline wheels to configure RigSkate. RigWheels are mounted to the RigPlate with common 5/16″ OR 8mm bolts. As often as possible, common parts and hardware are used in Rigwheels products to give customers the ability to modify and come up with different configurations. This linear slider travels extremely well. With the RigWheels removed, the flat 5/16″ thick RigPlates can fit in many common places like a laptop pocket. 4 RigWheels packed into their included travel bag are about the size of a portable hard drive. Aluminum and steel pipe/tube are recommended for suspended camera slider applications like this. 1 x RigPlate1 x RigAxle6 x MicroWheel2 x 3/8" Bolt 6" Long4 x 3/8" Wing Nut7 x 3/8" Washer4 x 5/16" Bolt 1-1/4" Long6 x 5/16" Washer6 x 5/16" Wing Nut6 x 5/16" Short Wheel Spacer2 x 5/16" Bolt 3" Long3/8" Bolt 3/4" Long2 x 3/8" Split Washer

RigWheels Cloud Mount PRO SKU: CM-P The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount PRO adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup8 x C-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x Sidecar Tray

RigWheels Passport Camera Dolly SKU: PCD1 The Passport Camera Dolly System is tailor made for traveling professionals and remote on-location production. The all-in-one design and rock solid build quality make the Passport Camera Dolly system ideal for international documentary and network news style production where larger/heavier camera systems (up to 100 pounds) are being used and a stable, reliable platform is needed. The entire kit is flight ready at 50lbs (23kg) an won’t incur expensive excess charges. 6.3′ (1.95m) of track collapse into 19″ sections that pack along with the camera dolly carriage, end-brackets and ball-head adapters into the included custom Pelican 1610 protector case (with wheels & handle). This system includes RailDolly Camera Dolly CarriageUniversal End Brackets75 & 100mm Ball Head Adapters8 x 6.3′ of PortaRail in 19″ sections.Pelican 1610 Protector Case with Custom Foam Individual components 1 x RigPlate22 x RigAxle4 x Inline Wheel4 x Longboard Wheel8 x 19″ PortaRail 1pc8 x PortaRail Connector16 x Rubber End Caps1 x Passport Camera Dolly Case2 x Baby Junior Adapter2 x 18″ Cross Bar4 x Variable Size Pipe Clamp1 x 100mm Ball Adapter1 x 75mm Ball Adapter8 x 3 Prong Knob – 5/16-18″4 x 3 Prong Knob – 1/4-20″4 x Long 5/16″ Wheel Spacer4 x 5/16″ Bolt – 3-1/2″ Long4 x 5/16″ Bolt – 1-1/4″ Long12 x 5/16″ Washer3 x 3/8″ Bolt – 3/4″ Long3 x 3/8″ Washer2 x 3/8″ Split Washer4 x Wing Nut – 5/16″

RigWheels Passport 2 SKU: PCD2 The Passport 2 Slider/Dolly System is tailor made for traveling professionals and remote on-location production. The all-in-one design and rock solid build quality make the Passport 2 Slider/Dolly system ideal for international documentary and network news style production where larger/heavier camera systems (up to 100 pounds) are being used and a stable, reliable platform is needed. The Passport 2 has dedicated (screw in) tripod-head adapters which allow for more range-of-moting for leveling your head as well as quicker setup. The entire RigWheels Passport 2 kit is flight ready at 50lbs (23kg) an won’t incur expensive excess charges. 6.3′ (1.95m) of track collapse into 19″ sections that pack along with the slider carriage, end-brackets and ball-head adapters into the included custom Pelican 1610 protector case (with wheels & handle). The track/tubes are the strongest and most accurate collapsable rail that we have seen on the market. Constructed from high-grade 6061 aluminum for rigidity and machined to a tolerance of .001″, sections of track connect seamlessly via threaded connectors (you will not notice a “bump” when rolling over them). The 19″ sections are interchangeable with our larger 40″ PortaRail systems so if longer range is needed, you can always add more length. At the included 6.3′ length, the rails have less than 1/8″ of flex with a 40lb load placed at the center. Transporting long pipe or tube for a suspended rail system like this has been prohibitive in the past for both cost and convenience reasons. Our goal in designing this system was to provide a professional solution for traveling production that does not require carrying additional bags or a bunch of extra hardware and stands to operate. The all-in-one design of the Passport slider/dolly can save $100 or more per trip in just checked bags. Portable dolly systems where track is placed on the ground have achieved this in the past but the Passport suspended rail dolly offers a lot more flexibility in where and how you can use it such as on uneven terrain or placing the system over objects. One of the practical design elements of the carriage is that it can be used as a high-hat without any reconfiguration. Just jump the entire camera and carriage off the rails and place it wherever you like. Like all of RigWheels products, the Passport is multi-function and the included components can be used to configure the RigSkate tabletop skater. In the box 1 x RigPlate Pro2 x RigAxle 4 x Inline Wheel 4 x Longboard Wheel 8 x 19″ PortaRail 1pc 8 x PortaRail Connector 16 x Rubber End Caps 1 x Passport Camera Dolly Case 2 x Baby Junior Adapter 2 x 18″ Cross Bar 4 x Variable Size Pipe Clamp 1 x 100mm Ball Adapter Pro 1 x 75mm Ball Adapter Pro 1 X Flat Adapter for RigPlate Pro 4 x 3” Stand Off 8 x 3 Prong Knob – 5/16-18″ 4 x 3 Prong Knob – 1/4-20″ 4 x Long 5/16″ Wheel Spacer 4 x 5/16″ Bolt – 3-1/2″ Long 4 x 5/16″ Bolt – 1-1/4″ Long 12 x 5/16″ Washer 3 x 3/8″ Bolt – 3/4″ Long 3 x 3/8″ Washer 2 x 3/8″ Split Washer 4 x Wing Nut – 5/16″

RigWheels RigMount XL Sidecar Hostess Tray SKU: RMXL-SC The Sidecar / Hostess Tray configuration is one of our favorites to get some great classic angles. Because the sides of vehicles generally have a lot of curves and contours A-Cup suction cups are recommended for this setup because they can conform the the curves. When possible magnets are preferred because of the more solid connection. Sidecar/Hostess Tray includes 2 x RigPlate6 x RigAxle8 x A-Cup – Suction Cup4 x 3 Prong Knob – 5/16-18 x 1″1 x 5/16″ bolt – 2″ Long1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x Wing Nut – 5/16″6 x 5/16″ Washer2 x 5/16″ bolt – 7/8″ Long

RigWheels Inline Wheel SKU: IW01 These Rigwheels inline skate wheels are the perfect custom formulation for film and video applications. Not too hard, not too soft. They include ABEC 7 bearings and the hard-to-find spacers that go inside the wheel. Can be mounted with 5/16″ or M8 size bolts.

RigWheels RigSkate Table top Dolly SKU: RS01 Introducing the RigWheels RigSkate 2 Camera Skater Dolly - Base only, the perfect tool for capturing smooth and dynamic shots with your camera. This innovative dolly is designed with precision and versatility in mind, making it a must-have for any filmmaker or videographer. The RigSkate 2 is built with high-quality rigwheels, ensuring durability and stability for your camera. Its compact and lightweight design allows for easy transportation and setup, making it ideal for on-the-go shooting. The base only option gives you the flexibility to customize your dolly with your preferred camera mount and accessories. With its skater design, the RigSkate 2 allows for smooth and fluid movements, giving your shots a professional and polished look. It can be used on a variety of surfaces, from smooth floors to rough terrain, making it suitable for any shooting location. This camera skater dolly is compatible with a wide range of cameras, from DSLRs to professional cinema cameras, making it a versatile tool for any project. Its base only option also allows for compatibility with different types of camera mounts, giving you the freedom to use your preferred equipment. Upgrade your filming game with the RigWheels RigSkate 2 Camera Skater Dolly - Base only. Its high-quality construction, versatile design, and smooth movements make it a valuable addition to any filmmaker's toolkit. In the box 1 x RigPlate2 x RigAxle4 x Inline Wheel2 x 3 Prong Knob – 5/16-18 x 1″4 x 5/16″ Bolt – 1-1/4″ Long1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer

RigWheels MicroWheel Stage-1 SKU: MWS1 MicroWheel Stage 1 Portable Camera Slider combines 4 MicroWheels  and 1 RigPlate with the appropriate mounting hardware for use together.RigWheels portable camera slider kits and parts are designed for easy expansion and and multifunction use. This camera slider carriage allows you to operate on smooth flat surfaces (such as a counter top or glass table) as well as on pipe as shown below. MicroWheel camera slider wheels will run on any smooth pipe with an outside diameter between 1″ & 2″.In addition to the variety of styles of movement you can achieve with this kit, you always have the ability to increase functionality by adding different parts. For example, you can add 2 RigAxels with inline wheels to configure RigSkate. Add a second RigPlate or a RigAxel with MircoWheels and you can configure a captive rail camera dolly.MicroWheels are mounted to the RigPlate with common 5/16″ OR 8mm bolts. As often as possible, common parts and hardware are used in Rigwheels products to give customers the ability to modify and come up with different configurations. This portable camera slider travels extremely well. With the MicroWheels removed, the flat 5/16″ thick RigPlate can fit in many common places like a laptop pocket. The 4 MicroWheels pack into their included travel bag are about the size of a portable hard drive. Pipe and tube for track can be found at most any hardware store. PVC pipe works well for applications when the pipe will be on the ground or a solid surface. Aluminum and steel pipe/tube are recommended for suspended camera dolly applications. In the box 1 x RigPlate 1 x RigAxle 4 x MicroWheel Camera Dolly Wheels4 x 5/16" Bolt (1.25" Long)8 x 5/16" Nut3/8" Bolt (0.75" Long)

RigWheels Cloud Mount DSLR SKU: CM-DS The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on RigMount XL mounting platform, the RigWheels Cloud Mount DSLR adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the RigWheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. Cloud Mount DSLR - In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)8 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 1″ – Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key

RigWheels Cloud Mount Standard SKU: CM-FSThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available. Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle. This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key

RigWheels Cloud Mount SideCar SKU: CM-SC The RigWheels Cloud Mount SideCar is the upgraded assortment of parts for out Sidecar/Hostess Tray configuration. This includes all of the parts for the standard (hood/roof/trunk) configuration plus the additional components necessary for the sidecar / hostess tray / underslung configurations. In the box 3 x RigPlate6 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 2″ Thumb Knob4 x 5/16″ x 1″ Thumb Knob2 x 5/16″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup2 x 5/16″ bolt – 7/8″ Long1 x 3/16″ Hex Key1 x 5/32″ Hex Key2 x 5/16″ x 3/4″ Thumb Knob4x 5/16″ Female Thumb Knob

RigWheels RigMount XL8 SKU: RMXL-8 RigMount XL is a robust mounting platform designed for mounting brushless gimbals. This configuration builds on the popularity of the RigMount X magnetic mount. Brushless gimbals have quickly become a regular part of on-location production and the RigMount XL provides a quick and secure way to get dynamic shots from vehicles.  The RigWheels RigMount XL provides a wide “stance” which is ideal for the higher center of gravity associated when mounting a gimbal. The wider stance also helps distribute the weight of the gimbal and camera over a greater area so flex in body-panels is not an issue. This wider stance is also ideal for mounting larger camera rigs without a gimbal. Parts are precision machined from 6061 aluminum and machined to a tolerance of .001″. Standard configuration uses 8 of Rigwheels RigMount Magnetic Mounts. The magnets are rubber coated to protect the mounting surface.  Each of the magnets provides up to 50lb of pulling force. To help adapt to curves in the body panels of a car magnets can be screwed in/out of the the arms. Magnets can be added or removed to provide the strength necessary for your application. You can use up to 20 magnets with the mounting holes in the RigPlate and Arms (up to 1000lb of pulling force). RigMount XL (8 magnets) includes 1 x RigPlate4 x RigAxle8 x RigMount Magnetic Mount – Long4 x 3 Prong Knob – 5/16-18 x 1″1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer1 x 3/8″ Split Washer