RigWheels Passport Camera Dolly

RigWheels Passport 2 SKU: PCD2 The Passport 2 Slider/Dolly System is tailor made for traveling professionals and remote on-location production. The all-in-one design and rock solid build quality make the Passport 2 Slider/Dolly system ideal for international documentary and network news style production where larger/heavier camera systems (up to 100 pounds) are being used and a stable, reliable platform is needed. The Passport 2 has dedicated (screw in) tripod-head adapters which allow for more range-of-moting for leveling your head as well as quicker setup. The entire RigWheels Passport 2 kit is flight ready at 50lbs (23kg) an won’t incur expensive excess charges. 6.3′ (1.95m) of track collapse into 19″ sections that pack along with the slider carriage, end-brackets and ball-head adapters into the included custom Pelican 1610 protector case (with wheels & handle). The track/tubes are the strongest and most accurate collapsable rail that we have seen on the market. Constructed from high-grade 6061 aluminum for rigidity and machined to a tolerance of .001″, sections of track connect seamlessly via threaded connectors (you will not notice a “bump” when rolling over them). The 19″ sections are interchangeable with our larger 40″ PortaRail systems so if longer range is needed, you can always add more length. At the included 6.3′ length, the rails have less than 1/8″ of flex with a 40lb load placed at the center. Transporting long pipe or tube for a suspended rail system like this has been prohibitive in the past for both cost and convenience reasons. Our goal in designing this system was to provide a professional solution for traveling production that does not require carrying additional bags or a bunch of extra hardware and stands to operate. The all-in-one design of the Passport slider/dolly can save $100 or more per trip in just checked bags. Portable dolly systems where track is placed on the ground have achieved this in the past but the Passport suspended rail dolly offers a lot more flexibility in where and how you can use it such as on uneven terrain or placing the system over objects. One of the practical design elements of the carriage is that it can be used as a high-hat without any reconfiguration. Just jump the entire camera and carriage off the rails and place it wherever you like. Like all of RigWheels products, the Passport is multi-function and the included components can be used to configure the RigSkate tabletop skater. In the box 1 x RigPlate Pro2 x RigAxle 4 x Inline Wheel 4 x Longboard Wheel 8 x 19″ PortaRail 1pc 8 x PortaRail Connector 16 x Rubber End Caps 1 x Passport Camera Dolly Case 2 x Baby Junior Adapter 2 x 18″ Cross Bar 4 x Variable Size Pipe Clamp 1 x 100mm Ball Adapter Pro 1 x 75mm Ball Adapter Pro 1 X Flat Adapter for RigPlate Pro 4 x 3” Stand Off 8 x 3 Prong Knob – 5/16-18″ 4 x 3 Prong Knob – 1/4-20″ 4 x Long 5/16″ Wheel Spacer 4 x 5/16″ Bolt – 3-1/2″ Long 4 x 5/16″ Bolt – 1-1/4″ Long 12 x 5/16″ Washer 3 x 3/8″ Bolt – 3/4″ Long 3 x 3/8″ Washer 2 x 3/8″ Split Washer 4 x Wing Nut – 5/16″

CamDolly Standard Kit Set includes 1) 1 Baseplate (1)2) Extension Legs (4)3) Inflatable Pneumatic Wheels (4)4) Table Top Wheels (4)5) Track Wheels (2-fixed, 2-with extending arm)6) Tripod Holders (3)7) Doorway Dolly Push/Pull/Turn Adapters (2)8) Height Difference Adapters (2)9) Seat Assembly (1)10) T-bar Assembly (1)11) Track Ends/Custom-made tracking board support (2 for tracks, 2 for support)12) Flexible Solid Rubber Truck (1x15 meters/ 1x50 ft.)13) All the necessary screws14) Degrees vs. Diameter Chart (Imperial and Metric) (2)15) 75mm and 10mm Bowl Mount Adapters (1)16) Flat/Mitchell Mount Adapter (attached to the Baseplate, can be exchange with bowl adapters) (1)Hallmarks of Excellence Camera Dolly As soon as you start working with the CamDolly, one thing becomes immediately and inarguably clear: This is a well-conceived, well-made piece of precision professional equipment. The care and consideration given to every detail of the CamDolly’s design and construction has resulted in a dolly which delivers features lacking in other systems costing many times its price. 200kg weight-bearing capacity Even though the CamDolly is very light and portable it’s weight capacity is enormous. It can easily carry a camera man, the heaviest of the tripods, the heaviest tripod camera heads and the heaviest of the camera configurations. Fits in car trunk It’s true: Good things do come in small packages. Despite its compact, modular design, the CamDolly delivers all the functionality of systems many times its size, weight, and cost. Unassembled, the entire CamDolly system—including all wheels and accessories—fits easily into the trunk of a typical small car. Nonetheless, it can be transformed into a fully rideable dolly in just a few minutes. Built-in handle The CamDolly core component includes a convenient, ergonomically-friendly carrying handle, enabling the CamDolly to readily picked up and moved in most of its configurations. Complete system weighs only 35 kg Despite its solid construction and durability, the complete system weighs only 77 pounds (35 kilograms), enhancing its navigability and ease of movement. Its light weight also saves transportation effort and expense when shipping the unit or transporting it to remote locations 3 wheels sets – tabletop, track, inflatable Flexibility is what the CamDolly is all about. In just about any setting and on just about any navigable surface, the CamDolly is able to adapt easily and perform flawlessly. Its 3 sets of wheels — tracking, in-line skate, and inflatable pneumatic — enable the CamDolly to deliver the same exceptional performance on a tabletop, track, floor, or pavement, as well as many surfaces beyond the capabilities of other dollies. The in-line skate wheels deliver fantastic results on smooth surfaces such as tabletops or finished floors, while the inflatable pneumatic wheels are great for somewhat rougher surfaces. Includes industry standard track ends Its height-adjustable track ends allow for use of either industry standard tube track or common metal pipe available at any home improvement store, saving you money on expensive track rentals Includes 100 ft. solid rubber flexible track The CamDolly’s vibration-dampening flexible rubber track permits operation on irregular surfaces, as well as permitting a range of complex tracking shots impossible to achieve with traditional straight or curved track systems. Fast, easy assembly Operational efficiency is a key consideration in selecting any piece of production equipment: Time spent assembling, adjusting, and dissembling gear is time—and money—taken away from your production. The CamDolly’s minimalist, efficient design makes setup quick and effortless. Any configuration can be assembled in under 10 minutes. No tools required Carefully fitted components and a logical, intuitive assembly process mean that your CamDolly can assume any of a multitude of possible configurations within mere minutes, and all can be accomplished by a single person without using tools of any kind. At the end of the shooting day, teardown is just as fast Create any configuration in minutes Of course, the producent provides comprehensive instruction on the assembly of your CamDolly system, and after setting it up once or twice you’ll find it to be an incredibly simple process—a feature you’re especially sure to appreciate if you are depending on others to set up or tear down your gear. Assistants can be trained to handle CamDolly setup procedures just as easily. Any configuration can be assembled and disassebled in under 10 minutes. Guaranteed!

RigWheels Monorail 20' Kit SKU: MRK-20 The Rigwheels Monorail is a simple product with some very useful applications. We’ve all seen crazy contraptions that people have created to get a camera up and over a subject. With a gimbal on the Monorail you have a practical and easy way to elevate your camera to get some great angles. Think about getting a camera above a stove or bed or an office cube… The Monorail carriage rides on Rigwheels PortaRail or Cinestrut tubing and can be extended as long as needed. The rails can be suspended/supported by our inline supports which the carriage rides past without interference.

CamDolly Full Kit Camdolly Cinema Systems Whether you need a Table Top, a Fully Rideable Tracking Camera Dolly or anything in between, The CamDolly CS lets you configure it all in just about 5 minutes. You can set it up as: Table TopCamera SliderOrbit DollyDoorway DollyTracking Dolly Set includes CAMDOLLY STANDARD KIT with 1) 1 x Baseplate2) 4 x Extension Legs3) 4 x Inflatable Pneumatic Wheels4) 4 x Table Top Wheels5) Track Wheels (2-fixed, 2-with extending arm)6) 3 x Tripod Holders7) 2 x Doorway Dolly Push/Pull/Turn Adapters8) 2 x Height Difference Adapters9) 1 x Seat Assembly10) 1 x T-bar Assembly11) Track Ends/Custom-made tracking board support (2 for tracks, 2 for support)12) Flexible Solid Rubber Truck (2x15 meters/ 2x50 ft.)13) All the necessary screws14) 2 x Degrees vs. Diameter Chart (Imperial and Metric)15) 1 x 75mm and 10mm Bowl Mount Adapters16) 1 x Flat/Mitchell Mount Adapter (attached to the Baseplate, can be exchange with bowl adapters) as well as 17) 1 x 150mm Bowl Mount Adapter18) 1 x Bazooka Mount Adapter19) 3 x  Case with Foam Insert20) 2 x Flexible Solid Rubber Track Case