MID49 Breakout Side Plate for RED V-Raptor SKU: M49-BOB-SPL-RVR Breakout Side Plate for RED V-Raptor attaches to the side of the RED V-Raptor and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. Two offset 1/4-20 holes matching RED's spacing allow certain 3rd party products to be attached like GDU Atlas Side Handle (Raptor, Right). Rear 1/4-20's provide ideal mounting locations for Audio Breakout AB-1 (V-Raptor) and EXT Breakout EB-1. Recessed cable loops in the side plate allow for clean cable management. Weight: 102gDimensions: 137 x 108 x 12mm
MID49 Cage NATO Side Arm (ARRI 3/8-16) SKU: M49-CAG-ARR-3TN Cage NATO Side Arm (ARRI 3/8-16) attaches to an ARRI 3/8-16 accessory mount and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each end. 1/4-20 and 3/8-16 with accessory pins also available. Great for attaching to Top Plate (Sony Burano), Upper Cages, and many third party accessories.
MID49 Cage NATO Side Arm (ARRI 3/8-16, 135mm) SKU: M49-CAG-ARR-3TNXL Cage NATO Side Arm (ARRI 3/8-16, 135mm) attaches to an ARRI 3/8-16 accessory mount and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each end. 1/4-20 and 3/8-16 with accessory pins also available. Great for attaching to Top Plate (Blackmagic URSA Cine LF). This kit consists of individual components: ARRI 3/8-16 to ARRI Rosette and ARRI Rosette to NATO Rail (135mm).Weight: 96gDimensions (WxLxH): 32 x 156 x 30mm
MID49 Canon 1/4-20 Striped Rosette 15mm Rod ClampSKU: M49-SRC-CANCanon 1/4-20 Striped Rosette 15mm Rod Clamp attaches to the Canon 1/4-20 striped rosette found on the Canon C80, C400, C300mkIII, C500mkII, and many other cameras. Cross-cut teeth allows the Rod Clamp to be positioned sideways across the body for attaching accessories like the TWIST Mount EVF System or it can be positioned over the lens to hold a single 15mm rod for lens motors.Weight: 28gDimensions (WxLxH): 24 x 38 x 37mm
MID49 Canon C50 15mm Rod ClampSKU: M49-SRC-C50Canon C50 15mm Rod Clamp attaches to the two M4 holes on the front of the handle where the microphone shockmount would normally be installed. M4 holes are available to stack the Canon shockmount on top of the bracket. M4x20 ARRI MAP holes and an ARRI 1/4-20 are also available for additional mounting.Works great to mount the optional TWIST EVF System or 15mm Accessory Rod, sold separately.
MID49 Canon Rod Clamp and TWIST Mount Kit for C400, C300mkIII, C500mkII, LM-V2SKU: M49-EVF-KIT-CAN-RCCanon Rod Clamp and TWIST Mount Kit for C400, C300mkIII, C500mkII, LM-V2 combines the Canon 1/4-20 Striped Rosette 15mm Rod Clamp and TWIST Mount EVF Kit for Canon C300mkIII, C500mkII, LM-V2.The kit attaches to the side of the Canon C400 monitor or LM-V2 monitor and to the 1/4-20 striped rosette found on the Canon handle and bodies of C400, C300mkIII, C500mkII, and several other cameras. The double sided NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew.
MID49 DB-4 Camera Mount Only (Canon C80)SKU: M49-DB4-CMDB-4 Camera Mount Only (Canon C80) attaches to the DB-4 Power Distribution Boxes to mount on the back of the Canon C80 via the shoe mount of the C80 using locking pins and pressure.
MID49 Gimbal Bottom ARCA Adapter (DJI Ronin 2)SKU: M49-GMB-BOT-DJIGimbal Bottom ARCA Adapter (DJI Ronin 2) quickly attaches to any Baseline ARCA Dovetail listed below and provides a bottom DJI Ronin 2 dovetail interface. Quick to install and remove without tools. Sliding ARCA interface allows for further balancing over a fixed dovetail plate.Compatible ARCA SystemsBaseline ARCA Dovetail (7.5mm Height)Baseline ARCA Dovetail (12mm Height)Baseline ARCA Dovetail (14.5mm Height)Baseline 15mm LW Baseplate (Sony Burano, FX6, Venice, Venice 2, Rialto / Blackmagic URSA Cine LF, URSA Mini)Baseline 15mm LW (Canon C400, C300 MK III, C500 MK II, C200, C200B, C700 / Blackmagic Pocket 6K / Kinefinity MAVO Mark 2 Baseplate)Baseline 15mm LW (Sony FX9, FS7, FS7mkII / Canon C100mkII, C300mkII, C100, C300, C500 Baseplate)Baseline 15mm LW (RED KOMODO, KOMODO-X / Blackmagic Pocket 4K / FREEFLY Ember S5K Baseplate)Baseline 15mm LW (RED V-Raptor Baseplate)Baseline 15mm LW (Sony FS5, Panasonic EVA1, VariCam LT, VariCam 35 Baseplate)Upper Cage for Canon C70Upper Cage for Canon C80Upper Cage for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2)Upper Cage for FUJIFILM GFX100 II
Gimbal Bottom ARCA Adapter (DJI S, RS2, RS3, RS4)SKU: M49-GMB-BOT-DJI-RSGimbal Bottom ARCA Adapter (DJI S, RS2, RS3, RS4) quickly attaches to any Baseline ARCA Dovetail listed below and provides a bottom DJI Ronin RS4 dovetail interface, including the linear gear for fine-tuning balance. For wide camera bodies, side-to-side adjustment can be achieved by loosening the screws on the bottom. Quick to install and remove without tools. Sliding ARCA interface allows for further balancing over a fixed dovetail plate. The RS4 dovetail shape is also compatible with older DJI gimbals including Ronin S, RS2, and RS3, as well as some Manfrotto dovetail clamps.Compatible ARCA SystemsBaseline ARCA Dovetail (7.5mm Height)Baseline ARCA Dovetail (12mm Height)Baseline ARCA Dovetail (14.5mm Height) Baseline 15mm LW Baseplate (Sony Burano, FX6, Venice, Venice 2, Rialto / Blackmagic URSA Cine LF, URSA Mini) Baseline 15mm LW (Canon C400, C300 MK III, C500 MK II, C200, C200B, C700 / Blackmagic Pocket 6K / Kinefinity MAVO Mark 2 Baseplate) Baseline 15mm LW (Sony FX9, FS7, FS7mkII / Canon C100mkII, C300mkII, C100, C300, C500 Baseplate)Baseline 15mm LW (RED KOMODO, KOMODO-X / Blackmagic Pocket 4K / FREEFLY Ember S5K Baseplate)Baseline 15mm LW (RED V-Raptor Baseplate) Baseline 15mm LW (Sony FS5, Panasonic EVA1, VariCam LT, VariCam 35 Baseplate) Upper Cage for Canon C70 Upper Cage for Canon C80 Upper Cage for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2) Upper Cage for FUJIFILM GFX100 II
MID49 Left Side Plate for RED KOMODO and KOMODO-XSKU: M49-BOB-LSP-KX Left Side Plate for RED KOMODO and KOMODO-X attaches to the side of the RED Komodo or RED Komodo-X and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. Contoured shape prevents users from accidentally hitting the media door button on Komodo-X.Two offset M4 holes matching RED's spacing allow certain 3rd party products to be attached like GDU Atlas Side Handle (Komodo, Left) and front M4 holes are compatible with RED's PL Mount support.Weight: 68gDimensions (WxLxH): 94 x 94 x 10mm
MID49 Left Side Plate for RED V-RaptorSKU: M49-BOB-LSP-VRLeft Side Plate for RED V-Raptor attaches to the side of the RED V-Raptor and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. Two offset 1/4-20 holes matching RED's spacing allow certain 3rd party products to be attached like GDU Atlas Side Handle (Raptor, Left).Weight: 52gDimensions (WxLxH): 34 x 108 x 11mm
MID49 LiFT Lens Support (15mm Studio)LiFT Lens Support (15mm Studio) attaches to 15mm rods in studio spacing (100mm apart center to center with a 17.25mm offset) and supports lenses with a standard height 3/8-16 support foot. Adjustable center column allows for vertical and side-to-side adjustment for easy installation.If additional distance is needed, consider adding the Adapter and Y Bracket Set, which includes two lengths of 3/8-16 extension, stainless steel 1/4-20 and 3/8-16 caps, and a rolling Y bracket for lenses that need support under a rotating lens barrel.
MID49 LiFT Lens Support (15mm Studio)LiFT Lens Support (15mm Studio) attaches to 15mm rods in studio spacing (100mm apart center to center with a 17.25mm offset) and supports lenses with a standard height 3/8-16 support foot. Adjustable center column allows for vertical and side-to-side adjustment for easy installation.If additional distance is needed, consider adding the Adapter and Y Bracket Set, which includes two lengths of 3/8-16 extension, stainless steel 1/4-20 and 3/8-16 caps, and a rolling Y bracket for lenses that need support under a rotating lens barrel.
MID49 LW 15mm Rod Bracket (FUJIFILM GFX ETERNA)SKU: M49-ROD-BRK-FUJELW 15mm Rod Bracket (FUJIFILM GFX ETERNA) attaches to the front of the Baseline Core 15mm LW (FUJIFILM GFX ETERNA) by two 1/4-20 screws and locating pins to provide 15mm rod clamps at the correct distance from the center of the lens. The center of the LW 15mm Bracket has a 1/4-20 vertical support post, which can be used to support lens adapters like Metabones, etc.
MID49 Microphone Shock Mount (Hot Shoe)SKU: M49-MIC-HSMMade in collaboration with Radius Windshields, the Microphone Shock Mount (Hot Shoe) mounts to a Hot Shoe (or Cold Shoe). Suspension provides exceptional isolation from movement, handling noise, and other vibrations. Recommended for use with short shotgun, omni, cardioid, and super-cardioid pencil mics with a diameter of 19-25mm, up to 250mm in length.
MID49 Microphone Shock Mount (Sideways 15mm Rod) SKU: M49-MIC-S15 Made in collaboration with Radius Windshields, the Microphone Shock Mount (Sideways 15mm Rod) mounts to a top 15mm rod like that found on Sony Burano and similar cameras. Suspension provides exceptional isolation from movement, handling noise, and other vibrations. Recommended for use with short shotgun, omni, cardioid, and super-cardioid pencil mics with a diameter of 19-25mm, up to 150mm in length. Weight: 57gDimensions: 70 x 104 x 65mm
MID49 Mid Kit for Blackmagic URSA Cine LFSKU: M49-KTM-BMD-UCLFMid Kit for Blackmagic URSA Cine LF is an accessory kit that includesTop Plate (Blackmagic URSA Cine LF)Provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, M4x20mm ARRI standard threaded holes, and ventilation holes for the URSA fan. Also works on the URSA Cine Immersive CameraRainbow Handle Kit (Black)Rainbow Handle Kit is a modular handle system that can be configured in a variety of ways, including down behind the battery, commonly referred to as a Hollywood or Panavision-style handle. Multi-Function Rod Bracket (MFRB 15mm LW) is included in the kit and has lightweight spaced 15mm rod openings which run front to back, and a sideways 15mm rod opening allows users to attach viewfinder mounts or microphone shockmounts2x Cage NATO Side Arm (ARRI 3/8-16, 135mm)Attaches to the sides of the Top Plate and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each endBaseline 15mm LW (Blackmagic URSA Cine LF)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom. Also works on the URSA Cine Immersive Camera2x 15mm Rod (9 inch)Stainless steel iris rods
MID49 Mid Kit for Canon C50SKU: M49-KTM-CAN-C50Mid Kit for Canon C50 is an accessory kit that includes:Upper Cage for Canon C50Form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. HDMI lock with reduction inserts protects the camera's HDMI port from abuse. Left side camera tie-down keeps the C50 from tipping under the force of focus motors. Rear handle tie-down adds stability to the handle-body connection when using heavy lenses. Lower ARCA Swiss dovetail attaches to the included baseplate, and the adjustable lens support adapter with 3 lengths of 1/4-20 support screw attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Upper Cage Canon C50)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom.Canon C50 15mm Rod ClampAttaches to the handle's M4 screws in place of the microphone shockmount. Replica M4 holes available for stacking the mic holder. M4x20mm ARRI MAP holes are available along with an ARRI 1/4-20.2x 15mm Rod (9 inch)Stainless steel iris rods.
MID49 Mid Kit for Canon C80SKU: M49-KTM-CAN-C80 Mid Kit for Canon C80 is an accessory kit that includes:Upper Cage for Canon C80Form fitting cage with 1/4-20, 3/8-16, and M4x20mm threaded holes in several places along with a shoe mount and 15mm rod clamps. ARCA Swiss dovetail slot on top accepts included ARCA Top Handle and Top Plate. The included 15mm accessory rod provide additional mounting for included AB-4 XLR adapter. Lower ARCA Swiss dovetail attaches to included baseplate and lens support adapter attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Core)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom.Baseline ARRI DovetailBaseline ARRI Dovetail is the lower ARRI mounting plate that interfaces with the Baseline Core.ARCA Top HandleSliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mounts.ARCA Top Plate (114mm)Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail length.Rod Bracket (15mm LW)Attaches to the Top Handle or Top Plate to provide 15mm LW rod support.Audio Breakout AB-4 (Canon C70/C80)Adapts the camera's two mini XLRs to standard, full-size XLRs2x 15mm 9 inch stainless steel rods are included in the Mid Kit.
MID49 Mid Kit for FUJIFILM GFX ETERNASKU: M49-KTM-FUJEMid Kit for FUJIFILM GFX ETERNA includesTop Plate (FUJIFILM GFX ETERNA)Attaches to the top of the camera and provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, and M4x20mm ARRI standard threaded holes. Segmented design allows the original ETERNA handle to be installed in the camera's dovetail slot over the Top Plate. When the ETERNA top handle is removed, the smaller section of Top Plate can be added.Baseline 15mm LW (FUJIFILM GFX ETERNA)A baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens and attaches to the bottom of the camera by three 3/8-16 screws. The center of the LW 15mm Bracket has a 1/4-20 vertical support post, which can be used to support lens adapters like Metabones, etc.2x Cage NATO Side Arm (ARRI 3/8-16)Attaches to the sides of the Top Plate and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each end.Top 15mm Rod BracketAttaches to the front of the Top Plate and holds two 15mm LW rods for adding focus motors, viewfinder mounts, and other accessories over the lens area.2x 15mm Rod (6")Stainless steel iris rods.Rainbow Handle (Black)Rainbow Handle has an ARCA Swiss dovetail shape that interfaces with the Top Plate. If additional support is needed for heavy camera builds, or if you want to skip the ARCA clamp, two 3/8-16 screws are included for attaching the Rainbow Handle directly to cheeseplates with 3/8-16 screws spaced up to 76mm apart, center to center. Other colors are available, email info@mid49.com if you prefer a different colored grip.
MID49 Mid Kit for FUJIFILM GFX100 IISKU: M49-KTM-FUJ-G100iiMid Kit for FUJIFILM GFX100 II is an accessory kit that includes:Upper Cage for FUJIFILM GFX100 IIForm fitting cage with 1/4-20, 3/8-16, and M4x20mm threaded holes in several places along with shoe mounts and 15mm rod clamps. ARCA Swiss dovetail slot on top accepts included ARCA Top Handle and Top Plate. Two included 15mm accessory rods provide additional mounting for included AB-6 XLR adapter. Lower ARCA Swiss dovetail attaches to included baseplate and lens support adapter attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Core)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottomBaseline ARRI DovetailBaseline ARRI Dovetail is the lower ARRI mounting plate that interfaces with the Baseline CoreARCA Top HandleSliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsARCA Top Plate (114mm)Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail lengthRod Bracket (15mm LW)Attaches to the Top Handle or Top Plate to provide 15mm LW rod supportAudio Breakout AB-3 (RED® Komodo™, DSMC2™, DSLR, Stereo 3.5mm TRS)Adapts the camera's two mini XLRs to two standard, full-size XLRs2x 15mm 9inch stainless steel rods are included in the Mid kit.
MID49 Mid Kit for Sony FX2SKU: M49-KTM-SON-FX2Mid Kit for Sony FX2 is an accessory kit that includes:Upper Cage for Sony FX2Form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. Swing-away HDMI lock with reduction inserts protects the camera's HDMI port from abuse and ties into the camera's threaded hole on the side to prevent tipping under the force of focus motors.An included handle tie-down for the Sony XLR-H1 audio handle adds stability to the setup, reducing stress on the MI Shoe connection when using heavy lenses. Lower ARCA Swiss dovetail attaches to the included baseplate, and the adjustable lens support adapter with 3 lengths of 1/4-20 support screw attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Upper Cage Sony FX2)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom.Sony FX Handle 15mm Rod ClampAttaches to the two 1/4-20 holes on the top of the Sony XLR-H1 handle and provides a sideways 15mm rod clamp for adding the optional TWIST Mount EVF System, sold separately.2x 15mm Rod (9 inch)Stainless steel iris rods.
MID49 Mid Kit for Blackmagic Cinema Camera 6K SKU: M49-KTM-BMD-P6K Mid Kit for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2) is an accessory kit that includes:Upper Cage for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2) is a Form fitting cage with 1/4-20, 3/8-16, and M4x20mm threaded holes in several places along with shoe mounts and 15mm rod clamps. ARCA Swiss dovetail slot on top accepts included ARCA Top Handle and Top Plate. Two included 15mm accessory rods provide additional mounting for included AB-6 XLR adapter. Lower ARCA Swiss dovetail attaches to included baseplate and lens support adapter attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Core) is a quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottomBaseline ARRI Dovetail is the lower ARRI mounting plate that interfaces with the Baseline CoreARCA Top Handle is a sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsARCA Top Plate (114mm) is a sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail lengthRod Bracket (15mm LW) attaches to the Top Handle or Top Plate to provide 15mm LW rod supportAudio Breakout AB-6 (Blackmagic Pocket 6K Pro, G2) adapts the camera's two mini XLRs to standard, full-size XLRs2x 15mm 9 inch stainless steel rods are included in the Mid Kit.
MID49 Mid Kit for Blackmagic PYXISSKU: M49-KTM-BMD-PYMid Kit for Blackmagic PYXIS is an accessory kit that includes:Top Plate (Blackmagic PYXIS)Provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, M4x20mm ARRI standard threaded holes, and ventilation holes for the PYXIS fan2x Cage NATO Side Arm (ARRI 3/8-16)Attaches to the sides of the Top Plate and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each endARCA Top HandleSliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsBaseline 15mm LW (Blackmagic PYXIS)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom2x 15mm Rod (9 inch)Stainless steel iris rodsSide Plate (Blackmagic PYXIS)A mounting plate that attaches to the side of the camera and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. =A marked set of 3/8-16 and 1/4-20 holes are on the sensor axis and the plate is the correct thickness to mount the camera vertically on Baseline 15mm LW (Blackmagic PYXIS) and use 15mm rods at the correct lens heightAudio Breakout AB-9 (Blackmagic PYXIS)A passive adapter that converts the camera's front mini XLR and rear 3.5mm TRS plug into two standard, full-size XLRs. Input 1 - balanced audio with phantom power via camera menuInput 2 - unbalanced audio, no phantom power available9.5 inch (24 cm) cable length with custom low profile mini XLR connector and Neutrik 3.5mm TRS.